Initial revision

1 files changed, 202 insertions, 0 deletions

diff --git a/board/mpl/mip405/init.S b/board/mpl/mip405/init.S
new file mode 100644
index 00000000000..f0a500ae133
--- /dev/null
+++ b/board/mpl/mip405/init.S
@@ -0,0 +1,202 @@
+/*------------------------------------------------------------------------------+
+ *
+ *      This source code has been made available to you by IBM on an AS-IS
+ *      basis.  Anyone receiving this source is licensed under IBM
+ *      copyrights to use it in any way he or she deems fit, including
+ *      copying it, modifying it, compiling it, and redistributing it either
+ *      with or without modifications.  No license under IBM patents or
+ *      patent applications is to be implied by the copyright license.
+ *
+ *      Any user of this software should understand that IBM cannot provide
+ *      technical support for this software and will not be responsible for
+ *      any consequences resulting from the use of this software.
+ *
+ *      Any person who transfers this source code or any derivative work
+ *      must include the IBM copyright notice, this paragraph, and the
+ *      preceding two paragraphs in the transferred software.
+ *
+ *      COPYRIGHT   I B M   CORPORATION 1995
+ *      LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
+ *-------------------------------------------------------------------------------*/
+
+/*-----------------------------------------------------------------------------
+ * Function:     ext_bus_cntlr_init
+ * Description:  Initializes the External Bus Controller for the external
+ *		peripherals. IMPORTANT: For pass1 this code must run from
+ *		cache since you can not reliably change a peripheral banks
+ *		timing register (pbxap) while running code from that bank.
+ *		For ex., since we are running from ROM on bank 0, we can NOT
+ *		execute the code that modifies bank 0 timings from ROM, so
+ *		we run it from cache.
+ *	Bank 0 - Flash or Multi Purpose Socket
+ *	Bank 1 - Multi Purpose Socket or Flash (set in C-Code)
+ *	Bank 2 - UART 1 (set in C-Code)
+ *	Bank 3 - UART 2 (set in C-Code)
+ *	Bank 4 - not used
+ *	Bank 5 - not used
+ *	Bank 6 - not used
+ *	Bank 7 - PLD Register
+ *-----------------------------------------------------------------------------*/
+#include <ppc4xx.h>
+
+#define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
+
+#include <configs/MIP405.h>
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include "mip405.h"
+
+
+ 	.globl	ext_bus_cntlr_init
+ext_bus_cntlr_init:
+  mflr    r4                      /* save link register */
+  bl      ..getAddr
+..getAddr:
+  mflr    r3                      /* get address of ..getAddr */
+  mtlr    r4                      /* restore link register */
+  addi    r4,0,14                 /* set ctr to 14; used to prefetch */
+  mtctr   r4                      /* 14 cache lines to fit this function */
+                                   /* in cache (gives us 8x14=112 instrctns) */
+..ebcloop:
+  icbt    r0,r3                   /* prefetch cache line for addr in r3 */
+  addi    r3,r3,32								/* move to next cache line */
+  bdnz    ..ebcloop               /* continue for 14 cache lines */
+
+   /*-------------------------------------------------------------------
+    * Delay to ensure all accesses to ROM are complete before changing
+    * bank 0 timings.
+    *------------------------------------------------------------------- */
+	addis	r3,0,0x0
+  ori     r3,r3,0xA000
+  mtctr   r3
+..spinlp:
+  bdnz    ..spinlp                /* spin loop */
+
+	/*-----------------------------------------------------------------------
+	 * decide boot up mode
+	 *----------------------------------------------------------------------- */
+	addi		r4,0,pb0cr
+	mtdcr		ebccfga,r4
+	mfdcr		r4,ebccfgd
+
+	andi.		r0, r4, 0x2000			/* mask out irrelevant bits */
+	beq			0f						/* jump if 8 bit bus width */
+
+	/* setup 16 bit things (Flash Boot)
+   *-----------------------------------------------------------------------
+   * Memory Bank 0 (16 Bit Flash) initialization
+   *---------------------------------------------------------------------- */
+
+	addi    r4,0,pb0ap
+	mtdcr   ebccfga,r4
+/*	addis   r4,0,0xFF8F */
+/*	ori     r4,r4,0xFE80 */
+/*	addis   r4,0,0x9B01 */
+/*	ori     r4,r4,0x5480 */
+	addis   r4,0,(FLASH_AP_B)@h
+	ori     r4,r4,(FLASH_AP_B)@l
+	mtdcr   ebccfgd,r4
+
+	addi    r4,0,pb0cr
+	mtdcr   ebccfga,r4
+	/* BS=0x010(4MB),BU=0x3(R/W), */
+/*	addis   r4,0,((FLASH_BASE0_PRELIM & 0xFFF00000) | 0x00050000)@h */
+/*	ori     r4,r4,0xA000          / * BW=0x01(16 bits) */
+	addis   r4,0,(FLASH_CR_B)@h
+	ori     r4,r4,(FLASH_CR_B)@l
+	mtdcr   ebccfgd,r4
+	b				1f
+
+0:
+
+  	/* 8Bit boot mode: */
+	/*-----------------------------------------------------------------------
+   	* Memory Bank 0 Multi Purpose Socket initialization
+   	*----------------------------------------------------------------------- */
+	/* 0x7F8FFE80 slowest boot */
+	addi    r4,0,pb0ap
+	mtdcr   ebccfga,r4
+#if 0
+	addis   r4,0,0x9B01
+	ori     r4,r4,0x5480
+#else
+	addis   r4,0,(MPS_AP_B)@h
+	ori     r4,r4,(MPS_AP_B)@l
+#endif
+	mtdcr   ebccfgd,r4
+
+	addi    r4,0,pb0cr
+ 	mtdcr   ebccfga,r4
+	/* BS=0x010(4MB),BU=0x3(R/W), */
+/*	addis   r4,0,((FLASH_BASE0_PRELIM & 0xFFF00000) | 0x00050000)@h */
+/*	ori     r4,r4,0x8000          / * BW=0x0( 8 bits) */
+
+	addis   r4,0,(MPS_CR_B)@h
+	ori     r4,r4,(MPS_CR_B)@l
+
+	mtdcr   ebccfgd,r4
+
+
+1:
+  /*-----------------------------------------------------------------------
+   * Memory Bank 2-3-4-5-6 (not used) initialization
+   *-----------------------------------------------------------------------*/
+  addi    r4,0,pb1cr
+  mtdcr   ebccfga,r4
+  addis   r4,0,0x0000
+  ori     r4,r4,0x0000
+  mtdcr   ebccfgd,r4
+
+  addi    r4,0,pb2cr
+  mtdcr   ebccfga,r4
+  addis   r4,0,0x0000
+  ori     r4,r4,0x0000
+  mtdcr   ebccfgd,r4
+
+  addi    r4,0,pb3cr
+  mtdcr   ebccfga,r4
+  addis   r4,0,0x0000
+  ori     r4,r4,0x0000
+  mtdcr   ebccfgd,r4
+
+  addi    r4,0,pb4cr
+  mtdcr   ebccfga,r4
+  addis   r4,0,0x0000
+  ori     r4,r4,0x0000
+  mtdcr   ebccfgd,r4
+
+  addi    r4,0,pb5cr
+  mtdcr   ebccfga,r4
+  addis   r4,0,0x0000
+  ori     r4,r4,0x0000
+  mtdcr   ebccfgd,r4
+
+	addi    r4,0,pb6cr
+  mtdcr   ebccfga,r4
+  addis   r4,0,0x0000
+  ori     r4,r4,0x0000
+  mtdcr   ebccfgd,r4
+
+	addi    r4,0,pb7cr
+  mtdcr   ebccfga,r4
+  addis   r4,0,0x0000
+  ori     r4,r4,0x0000
+  mtdcr   ebccfgd,r4
+	nop				/* pass2 DCR errata #8 */
+  blr
+
+/*-----------------------------------------------------------------------------
+ * Function:     sdram_init
+ * Description:  Configures the internal SRAM memory. and setup the
+ *               Stackpointer in it.
+ *----------------------------------------------------------------------------- */
+        .globl  sdram_init
+
+sdram_init:
+
+
+  blr
+