summaryrefslogtreecommitdiff
path: root/board/mpl/pip405
diff options
context:
space:
mode:
authorwdenk <wdenk>2003-09-10 22:30:53 +0000
committerwdenk <wdenk>2003-09-10 22:30:53 +0000
commit7205e4075d8b50e4dd89fe39ed03860b23cbb704 (patch)
tree0dfa865e7087ff4ee07967a2531c91ff5645a802 /board/mpl/pip405
parent149dded2b178bc0fb62cb6f61b87968d914b580a (diff)
* Patches by Denis Peter, 9 Sep 2003:U-Boot-0_4_8
add FAT support for IDE, SCSI and USB * Patches by Gleb Natapov, 2 Sep 2003: - cleanup of POST code for unsupported architectures - MPC824x locks way0 of data cache for use as initial RAM; this patch unlocks it after relocation to RAM and invalidates the locked entries. * Patch by Gleb Natapov, 30 Aug 2003: new I2C driver for mpc107 bridge. Now works from flash. * Patch by Dave Ellis, 11 Aug 2003: - JFFS2: fix typo in common/cmd_jffs2.c - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option - JFFS2: remove node version 0 warning - JFFS2: accept JFFS2 PADDING nodes - SXNI855T: add AM29LV800 support - SXNI855T: move environment from EEPROM to flash - SXNI855T: boot from JFFS2 in NOR or NAND flash * Patch by Bill Hargen, 11 Aug 2003: fixes for I2C on MPC8240 - fix i2c_write routine - fix iprobe command - eliminates use of global variables, plus dead code, cleanup.
Diffstat (limited to 'board/mpl/pip405')
-rw-r--r--board/mpl/pip405/init.S159
-rw-r--r--board/mpl/pip405/pip405.c17
-rw-r--r--board/mpl/pip405/pip405.h116
3 files changed, 134 insertions, 158 deletions
diff --git a/board/mpl/pip405/init.S b/board/mpl/pip405/init.S
index a0c76dd20b2..39f2ea534ae 100644
--- a/board/mpl/pip405/init.S
+++ b/board/mpl/pip405/init.S
@@ -41,17 +41,21 @@
#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-#include "configs/PIP405.h"
+#include <configs/PIP405.h>
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/cache.h>
#include <asm/mmu.h>
+#include "pip405.h"
+ .globl ext_bus_cntlr_init
+ ext_bus_cntlr_init:
+ mflr r4 /* save link register */
+ mfdcr r3,strap /* get strapping reg */
+ andi. r0, r3, PSR_ROM_LOC /* mask out irrelevant bits */
+ bnelr /* jump back if PCI boot */
- .globl ext_bus_cntlr_init
-ext_bus_cntlr_init:
- mflr r4 /* save link register */
bl ..getAddr
..getAddr:
mflr r3 /* get address of ..getAddr */
@@ -82,7 +86,7 @@ ext_bus_cntlr_init:
mfdcr r4,ebccfgd
andi. r0, r4, 0x2000 /* mask out irrelevant bits */
- beq 0f /* jump if 8 bit bus width */
+ beq 0f /* jump if 8 bit bus width */
/* setup 16 bit things
*-----------------------------------------------------------------------
@@ -90,74 +94,49 @@ ext_bus_cntlr_init:
*---------------------------------------------------------------------- */
addi r4,0,pb0ap
- mtdcr ebccfga,r4
- addis r4,0,0x9B01
- ori r4,r4,0x5480
- mtdcr ebccfgd,r4
-
- addi r4,0,pb0cr
- mtdcr ebccfga,r4
- /* BS=0x011(8MB),BU=0x3(R/W), */
- addis r4,0,((FLASH_BASE0_PRELIM & 0xFFF00000) | 0x00050000)@h
- ori r4,r4,0xA000 /* BW=0x01(16 bits) */
- mtdcr ebccfgd,r4
-
- /*-----------------------------------------------------------------------
- * Memory Bank 1 (Multi Purpose Socket) initialization
- *----------------------------------------------------------------------*/
- addi r4,0,pb1ap
- mtdcr ebccfga,r4
- addis r4,0,0x0281
- ori r4,r4,0x5480
- mtdcr ebccfgd,r4
-
- addi r4,0,pb1cr
- mtdcr ebccfga,r4
- /* BS=0x011(8MB),BU=0x3(R/W), */
- addis r4,0,((MULTI_PURPOSE_SOCKET_ADDR & 0xFFF00000) | 0x00050000)@h
- ori r4,r4,0x8000 /* BW=0x0( 8 bits) */
- mtdcr ebccfgd,r4
+ mtdcr ebccfga,r4
+ addis r4,0,(FLASH_AP_B)@h
+ ori r4,r4,(FLASH_AP_B)@l
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb0cr
+ mtdcr ebccfga,r4
+ /* BS=0x010(4MB),BU=0x3(R/W), */
+ addis r4,0,(FLASH_CR_B)@h
+ ori r4,r4,(FLASH_CR_B)@l
+ mtdcr ebccfgd,r4
b 1f
0:
- /* 8Bit boot mode: */
+ /* 8Bit boot mode: */
/*-----------------------------------------------------------------------
- * Memory Bank 0 Multi Purpose Socket initialization
- *----------------------------------------------------------------------- */
-
+ * Memory Bank 0 Multi Purpose Socket initialization
+ *----------------------------------------------------------------------- */
+ /* 0x7F8FFE80 slowest boot */
addi r4,0,pb0ap
- mtdcr ebccfga,r4
- addis r4,0,0x9B01
- ori r4,r4,0x5480
- mtdcr ebccfgd,r4
+ mtdcr ebccfga,r4
+ addis r4,0,(MPS_AP_B)@h
+ ori r4,r4,(MPS_AP_B)@l
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb0cr
+ mtdcr ebccfga,r4
+ /* BS=0x010(4MB),BU=0x3(R/W), */
+ addis r4,0,(MPS_CR_B)@h
+ ori r4,r4,(MPS_CR_B)@l
+ mtdcr ebccfgd,r4
- addi r4,0,pb0cr
- mtdcr ebccfga,r4
- /* BS=0x011(4MB),BU=0x3(R/W), */
- addis r4,0,((FLASH_BASE0_PRELIM & 0xFFF00000) | 0x00050000)@h
- ori r4,r4,0x8000 /* BW=0x0( 8 bits) */
- mtdcr ebccfgd,r4
+1:
/*-----------------------------------------------------------------------
- * Memory Bank 1 (Flash) initialization
+ * Memory Bank 2-3-4-5-6 (not used) initialization
*-----------------------------------------------------------------------*/
- addi r4,0,pb1ap
- mtdcr ebccfga,r4
- addis r4,0,0x0281
- ori r4,r4,0x5480
- mtdcr ebccfgd,r4
-
addi r4,0,pb1cr
mtdcr ebccfga,r4
- /* BS=0x011(8MB),BU=0x3(R/W), */
- addis r4,0,((MULTI_PURPOSE_SOCKET_ADDR & 0xFFF00000) | 0x00050000)@h
- ori r4,r4,0xA000 /* BW=0x0( 8 bits) */
+ addis r4,0,0x0000
+ ori r4,r4,0x0000
mtdcr ebccfgd,r4
-1:
- /*-----------------------------------------------------------------------
- * Memory Bank 2-3-4-5-6 (not used) initialization
- *-----------------------------------------------------------------------*/
addi r4,0,pb2cr
mtdcr ebccfga,r4
addis r4,0,0x0000
@@ -182,28 +161,18 @@ ext_bus_cntlr_init:
ori r4,r4,0x0000
mtdcr ebccfgd,r4
- addi r4,0,pb6cr
+ addi r4,0,pb6cr
mtdcr ebccfga,r4
addis r4,0,0x0000
ori r4,r4,0x0000
mtdcr ebccfgd,r4
- /*-----------------------------------------------------------------------
- * Memory Bank 7 (Config Register) initialization
- *----------------------------------------------------------------------- */
- addi r4,0,pb7ap
- mtdcr ebccfga,r4
- addis r4,0,0x0181 /* Doc says TWT=3 and Openios TWT=3!! */
- ori r4,r4,0x5280 /* disable Ready, BEM=0 */
- mtdcr ebccfgd,r4
-
addi r4,0,pb7cr
mtdcr ebccfga,r4
- /* BS=0x0(1MB),BU=0x3(R/W), */
- addis r4,0,((CONFIG_PORT_ADDR & 0xFFF00000) | 0x00010000)@h
- ori r4,r4,0x8000 /* BW=0x0(8 bits) */
+ addis r4,0,0x0000
+ ori r4,r4,0x0000
mtdcr ebccfgd,r4
- nop /* pass2 DCR errata #8 */
+ nop /* pass2 DCR errata #8 */
blr
/*-----------------------------------------------------------------------------
@@ -217,3 +186,45 @@ sdram_init:
blr
+
+
+#if defined(CONFIG_BOOT_PCI)
+ .section .bootpg,"ax"
+ .globl _start_pci
+/*******************************************
+ */
+
+_start_pci:
+ /* first handle errata #68 / PCI_18 */
+ iccci r0, r0 /* invalidate I-cache */
+ lis r31, 0
+ mticcr r31 /* ICCR = 0 (all uncachable) */
+ isync
+
+ mfccr0 r28 /* set CCR0[24] = 1 */
+ ori r28, r28, 0x0080
+ mtccr0 r28
+
+ /* setup PMM0MA (0xEF400004) and PMM0PCIHA (0xEF40000C) */
+ lis r28, 0xEF40
+ addi r28, r28, 0x0004
+ stw r31, 0x0C(r28) /* clear PMM0PCIHA */
+ lis r29, 0xFFF8 /* open 512 kByte */
+ addi r29, r29, 0x0001/* and enable this region */
+ stwbrx r29, r0, r28 /* write PMM0MA */
+
+ lis r28, 0xEEC0 /* address of PCIC0_CFGADDR */
+ addi r29, r28, 4 /* add 4 to r29 -> PCIC0_CFGDATA */
+
+ lis r31, 0x8000 /* set en bit bus 0 */
+ ori r31, r31, 0x304C/* device 6 func 0 reg 4C (XBCS register) */
+ stwbrx r31, r0, r28 /* write it */
+
+ lwbrx r31, r0, r29 /* load XBCS register */
+ oris r31, r31, 0x02C4/* clear BIOSCS WPE, set lower, extended and 1M extended BIOS enable */
+ stwbrx r31, r0, r29 /* write back XBCS register */
+
+ nop
+ nop
+ b _start /* normal start */
+#endif
diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c
index a77e2c9ba4f..b4715aada36 100644
--- a/board/mpl/pip405/pip405.c
+++ b/board/mpl/pip405/pip405.c
@@ -194,6 +194,11 @@ int board_pre_init (void)
#ifdef SDRAM_DEBUG
DECLARE_GLOBAL_DATA_PTR;
#endif
+ /* set up the config port */
+ mtdcr (ebccfga, pb7ap);
+ mtdcr (ebccfgd, CONFIG_PORT_AP);
+ mtdcr (ebccfga, pb7cr);
+ mtdcr (ebccfgd, CONFIG_PORT_CR);
memclk = get_bus_freq (tmemclk);
tmemclk = 1000000000 / (memclk / 100); /* in 10 ps units */
@@ -657,8 +662,20 @@ static int test_dram (unsigned long ramsize)
}
+extern flash_info_t flash_info[]; /* info for FLASH chips */
+
int misc_init_r (void)
{
+ DECLARE_GLOBAL_DATA_PTR;
+ /* adjust flash start and size as well as the offset */
+ gd->bd->bi_flashstart=0-flash_info[0].size;
+ gd->bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN;
+ gd->bd->bi_flashoffset=0;
+
+ /* if PIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */
+ if (mfdcr(strap) & PSR_ROM_LOC)
+ mtspr(ccr0, (mfspr(ccr0) & ~0x80));
+
return (0);
}
diff --git a/board/mpl/pip405/pip405.h b/board/mpl/pip405/pip405.h
index c2411a32e4d..b41c5bb2827 100644
--- a/board/mpl/pip405/pip405.h
+++ b/board/mpl/pip405/pip405.h
@@ -25,6 +25,7 @@
* Global routines used for PIP405
*****************************************************************************/
+#ifndef __ASSEMBLY__
extern int mem_test(unsigned long start, unsigned long ramsize,int mode);
@@ -35,13 +36,13 @@ void user_led1(unsigned char on);
#define PLD_BASE_ADDRESS CFG_ISA_IO_BASE_ADDRESS + 0x800
-#define PLD_PART_REG PLD_BASE_ADDRESS + 0
-#define PLD_VERS_REG PLD_BASE_ADDRESS + 1
+#define PLD_PART_REG PLD_BASE_ADDRESS + 0
+#define PLD_VERS_REG PLD_BASE_ADDRESS + 1
#define PLD_BOARD_CFG_REG PLD_BASE_ADDRESS + 2
#define PLD_LED_USER_REG PLD_BASE_ADDRESS + 3
#define PLD_SYS_MAN_REG PLD_BASE_ADDRESS + 4
#define PLD_FLASH_COM_REG PLD_BASE_ADDRESS + 5
-#define PLD_CAN_REG PLD_BASE_ADDRESS + 6
+#define PLD_CAN_REG PLD_BASE_ADDRESS + 6
#define PLD_SER_PWR_REG PLD_BASE_ADDRESS + 7
#define PLD_COM_PWR_REG PLD_BASE_ADDRESS + 8
#define PLD_NIC_VGA_REG PLD_BASE_ADDRESS + 9
@@ -50,86 +51,32 @@ void user_led1(unsigned char on);
#define PIIX4_VENDOR_ID 0x8086
#define PIIX4_IDE_DEV_ID 0x7111
+#endif
/* timings */
-/* PLD (CS7) */
-#define PLD_BME 0 /* Burst disable */
-#define PLD_TWE 5 /* 5 * 30ns 120ns Waitstates (access=TWT+1+TH) */
-#define PLD_CSN 1 /* Chipselect is driven inactive for 1 Cycle BTW transfers */
-#define PLD_OEN 1 /* Cycles from CS low to OE low */
-#define PLD_WBN 1 /* Cycles from CS low to WE low */
-#define PLD_WBF 1 /* Cycles from WE high to CS high */
-#define PLD_TH 2 /* Number of hold cycles after transfer */
-#define PLD_RE 0 /* Ready disabled */
-#define PLD_SOR 1 /* Sample on Ready disabled */
-#define PLD_BEM 0 /* Byte Write only active on Write cycles */
-#define PLD_PEN 0 /* Parity disable */
-#define PLD_AP ((PLD_BME << 31) + (PLD_TWE << 23) + (PLD_CSN << 18) + (PLD_OEN << 16) + (PLD_WBN << 14) + \
- (PLD_WBF << 12) + (PLD_TH << 9) + (PLD_RE << 8) + (PLD_SOR << 7) + (PLD_BEM << 6) + (PLD_PEN << 5))
-
-/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define PLD_BS 0 /* 1 MByte */
-/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
-#define PLD_BU 3 /* R/W */
-/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
-#define PLD_BW 0 /* 16Bit */
-#define PLD_CR ((PER_PLD_ADDR & 0xfff00000) + (PLD_BS << 17) + (PLD_BU << 15) + (PLD_BW << 13))
-
-/* timings */
-
-#define PER_BOARD_ADDR (PER_UART1_ADDR+(1024*1024))
-/* Dummy CS to get the board revision */
-#define BOARD_BME 0 /* Burst disable */
-#define BOARD_TWE 255 /* 255 * 30ns 120ns Waitstates (access=TWT+1+TH) */
-#define BOARD_CSN 1 /* Chipselect is driven inactive for 1 Cycle BTW transfers */
-#define BOARD_OEN 1 /* Cycles from CS low to OE low */
-#define BOARD_WBN 1 /* Cycles from CS low to WE low */
-#define BOARD_WBF 1 /* Cycles from WE high to CS high */
-#define BOARD_TH 2 /* Number of hold cycles after transfer */
-#define BOARD_RE 0 /* Ready disabled */
-#define BOARD_SOR 1 /* Sample on Ready disabled */
-#define BOARD_BEM 0 /* Byte Write only active on Write cycles */
-#define BOARD_PEN 0 /* Parity disable */
-#define BOARD_AP ((BOARD_BME << 31) + (BOARD_TWE << 23) + (BOARD_CSN << 18) + (BOARD_OEN << 16) + (BOARD_WBN << 14) + \
- (BOARD_WBF << 12) + (BOARD_TH << 9) + (BOARD_RE << 8) + (BOARD_SOR << 7) + (BOARD_BEM << 6) + (BOARD_PEN << 5))
+/* CS Config register (CS7) */
+#define CONFIG_PORT_BME 0 /* Burst disable */
+#define CONFIG_PORT_TWE 255 /* 255 * 30ns 120ns Waitstates (access=TWT+1+TH) */
+#define CONFIG_PORT_CSN 1 /* Chipselect is driven inactive for 1 Cycle BTW transfers */
+#define CONFIG_PORT_OEN 1 /* Cycles from CS low to OE low */
+#define CONFIG_PORT_WBN 1 /* Cycles from CS low to WE low */
+#define CONFIG_PORT_WBF 1 /* Cycles from WE high to CS high */
+#define CONFIG_PORT_TH 2 /* Number of hold cycles after transfer */
+#define CONFIG_PORT_RE 0 /* Ready disabled */
+#define CONFIG_PORT_SOR 1 /* Sample on Ready disabled */
+#define CONFIG_PORT_BEM 0 /* Byte Write only active on Write cycles */
+#define CONFIG_PORT_PEN 0 /* Parity disable */
+#define CONFIG_PORT_AP ((CONFIG_PORT_BME << 31) + (CONFIG_PORT_TWE << 23) + (CONFIG_PORT_CSN << 18) + (CONFIG_PORT_OEN << 16) + (CONFIG_PORT_WBN << 14) + \
+ (CONFIG_PORT_WBF << 12) + (CONFIG_PORT_TH << 9) + (CONFIG_PORT_RE << 8) + (CONFIG_PORT_SOR << 7) + (CONFIG_PORT_BEM << 6) + (CONFIG_PORT_PEN << 5))
/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define BOARD_BS 0 /* 1 MByte */
+#define CONFIG_PORT_BS 0 /* 1 MByte */
/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
-#define BOARD_BU 3 /* R/W */
+#define CONFIG_PORT_BU 3 /* R/W */
/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
-#define BOARD_BW 0 /* 16Bit */
-#define BOARD_CR ((PER_BOARD_ADDR & 0xfff00000) + (BOARD_BS << 17) + (BOARD_BU << 15) + (BOARD_BW << 13))
-
-
-/* UART0 CS2 */
-#define UART0_BME 0 /* Burst disable */
-#define UART0_TWE 7 /* 7 * 30ns 210ns Waitstates (access=TWT+1+TH) */
-#define UART0_CSN 1 /* Chipselect is driven inactive for 1 Cycle BTW transfers */
-#define UART0_OEN 1 /* Cycles from CS low to OE low */
-#define UART0_WBN 1 /* Cycles from CS low to WE low */
-#define UART0_WBF 1 /* Cycles from WE high to CS high */
-#define UART0_TH 2 /* Number of hold cycles after transfer */
-#define UART0_RE 0 /* Ready disabled */
-#define UART0_SOR 1 /* Sample on Ready disabled */
-#define UART0_BEM 0 /* Byte Write only active on Write cycles */
-#define UART0_PEN 0 /* Parity disable */
-#define UART0_AP ((UART0_BME << 31) + (UART0_TWE << 23) + (UART0_CSN << 18) + (UART0_OEN << 16) + (UART0_WBN << 14) + \
- (UART0_WBF << 12) + (UART0_TH << 9) + (UART0_RE << 8) + (UART0_SOR << 7) + (UART0_BEM << 6) + (UART0_PEN << 5))
-
-/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define UART0_BS 0 /* 1 MByte */
-/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
-#define UART0_BU 3 /* R/W */
-/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
-#define UART0_BW 0 /* 8Bit */
-#define UART0_CR ((PER_UART0_ADDR & 0xfff00000) + (UART0_BS << 17) + (UART0_BU << 15) + (UART0_BW << 13))
-
-/* UART1 CS3 */
-#define UART1_AP UART0_AP /* same timing as UART0 */
-#define UART1_CR ((PER_UART1_ADDR & 0xfff00000) + (UART0_BS << 17) + (UART0_BU << 15) + (UART0_BW << 13))
-
+#define CONFIG_PORT_BW 0 /* 16Bit */
+#define CONFIG_PORT_CR ((CONFIG_PORT_ADDR & 0xfff00000) + (CONFIG_PORT_BS << 17) + (CONFIG_PORT_BU << 15) + (CONFIG_PORT_BW << 13))
/* Flash CS0 or CS 1 */
/* 0x7F8FFE80 slowest timing at all... */
@@ -149,19 +96,19 @@ void user_led1(unsigned char on);
#define FLASH_PEN 0 /* Parity disable */
/* Access Parameter Register for non Boot */
#define FLASH_AP ((FLASH_BME << 31) + (FLASH_TWE << 23) + (FLASH_CSN << 18) + (FLASH_OEN << 16) + (FLASH_WBN << 14) + \
- (FLASH_WBF << 12) + (FLASH_TH << 9) + (FLASH_RE << 8) + (FLASH_SOR << 7) + (FLASH_BEM << 6) + (FLASH_PEN << 5))
+ (FLASH_WBF << 12) + (FLASH_TH << 9) + (FLASH_RE << 8) + (FLASH_SOR << 7) + (FLASH_BEM << 6) + (FLASH_PEN << 5))
/* Access Parameter Register for Boot */
#define FLASH_AP_B ((FLASH_BME_B << 31) + (FLASH_FWT_B << 26) + (FLASH_BWT_B << 23) + (FLASH_CSN << 18) + (FLASH_OEN << 16) + (FLASH_WBN << 14) + \
- (FLASH_WBF << 12) + (FLASH_TH << 9) + (FLASH_RE << 8) + (FLASH_SOR << 7) + (FLASH_BEM << 6) + (FLASH_PEN << 5))
+ (FLASH_WBF << 12) + (FLASH_TH << 9) + (FLASH_RE << 8) + (FLASH_SOR << 7) + (FLASH_BEM << 6) + (FLASH_PEN << 5))
/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define FLASH_BS 2 /* 4 MByte */
+#define FLASH_BS FLASH_SIZE_PRELIM /* 4 MByte */
/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
#define FLASH_BU 3 /* R/W */
/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
#define FLASH_BW 1 /* 16Bit */
/* CR register for Boot */
-#define FLASH_CR_B ((FLASH_BASE0_PRELIM & 0xfff00000) + (FLASH_BS << 17) + (FLASH_BU << 15) + (FLASH_BW << 13))
+#define FLASH_CR_B ((FLASH_BASE_PRELIM & 0xfff00000) + (FLASH_BS << 17) + (FLASH_BU << 15) + (FLASH_BW << 13))
/* CR register for non Boot */
#define FLASH_CR ((MULTI_PURPOSE_SOCKET_ADDR & 0xfff00000) + (FLASH_BS << 17) + (FLASH_BU << 15) + (FLASH_BW << 13))
@@ -183,18 +130,19 @@ void user_led1(unsigned char on);
#define MPS_PEN 0 /* Parity disable */
/* Access Parameter Register for non Boot */
#define MPS_AP ((MPS_BME << 31) + (MPS_TWE << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \
- (MPS_WBF << 12) + (MPS_TH << 9) + (MPS_RE << 8) + (MPS_SOR << 7) + (MPS_BEM << 6) + (MPS_PEN << 5))
+ (MPS_WBF << 12) + (MPS_TH << 9) + (MPS_RE << 8) + (MPS_SOR << 7) + (MPS_BEM << 6) + (MPS_PEN << 5))
/* Access Parameter Register for Boot */
-#define MPS_AP_B ((MPS_BME_B << 31) + (MPS_FWT_B << 26) + (MPS_BWT_B << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \
- (MPS_WBF << 12) + (MPS_TH << 9) + (MPS_RE << 8) + (MPS_SOR << 7) + (MPS_BEM << 6) + (MPS_PEN << 5))
+#define MPS_AP_B ((MPS_BME_B << 31) + (MPS_FWT_B << 26) + (MPS_BWT_B << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \
+ (MPS_WBF << 12) + (MPS_TH << 9) + (MPS_RE << 8) + (MPS_SOR << 7) + (MPS_BEM << 6) + (MPS_PEN << 5))
/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
#define MPS_BS 2 /* 4 MByte */
+#define MPS_BS_B FLASH_SIZE_PRELIM /* 1 MByte */
/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
#define MPS_BU 3 /* R/W */
/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
#define MPS_BW 0 /* 8Bit */
/* CR register for Boot */
-#define MPS_CR_B ((FLASH_BASE0_PRELIM & 0xfff00000) + (MPS_BS << 17) + (MPS_BU << 15) + (MPS_BW << 13))
+#define MPS_CR_B ((FLASH_BASE_PRELIM & 0xfff00000) + (MPS_BS << 17) + (MPS_BU << 15) + (MPS_BW << 13))
/* CR register for non Boot */
#define MPS_CR ((MULTI_PURPOSE_SOCKET_ADDR & 0xfff00000) + (MPS_BS << 17) + (MPS_BU << 15) + (MPS_BW << 13))