doc: cleanup - move board READMEs into respective board directories

Also drop a few files referring to no longer / not yet supported
boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Jason Jin <jason.jin@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>

4 files changed, 271 insertions, 0 deletions

diff --git a/board/matrix_vision/mergerbox/README b/board/matrix_vision/mergerbox/README
new file mode 100644
index 00000000000..1994b65be11
--- /dev/null
+++ b/board/matrix_vision/mergerbox/README
@@ -0,0 +1,59 @@
+Matrix Vision MergerBox
+-----------------------
+
+1.	Board Description
+
+	The MergerBox is a 120x160mm single board computing platform
+	for 3D Full-HD digital video processing.
+
+	Power Supply is 10-32VDC.
+
+2	System Components
+
+2.1	CPU
+	Freescale MPC8377 CPU running at 800MHz core and 333MHz csb.
+	256 MByte DDR-II memory @ 333MHz data rate.
+	64 MByte Nor Flash on local bus.
+	1 GByte Nand Flash on FCM.
+	1 Vitesse VSC8601 RGMII ethernet Phys.
+	1 USB host controller over ULPI I/F with 4-Port hub.
+	2 serial ports. Console running on ttyS0 @ 115200 8N1.
+	1 mPCIe expansion slot (PCIe x1 + USB) used for Wifi/Bt.
+	2 PCIe x1 busses on local mPCIe and cutom expansion connector.
+	2 SATA host ports.
+	System configuration (HRCW) is taken from I2C EEPROM.
+
+2.2	Graphics
+	SM107 emebedded video controller driving a 5" 800x480 TFT panel.
+	Connected over 32-Bit/66MHz PCI utilizing 4 MByte embedded memory.
+
+2.3	FPGA
+	Altera Cyclone-IV EP4C115 with several PCI DMA engines.
+	Connects to 7x Gennum 3G-SDI transceivers as video interconnect
+	as well as a HDMI v1.4 compliant output for 3D monitoring.
+	Utilizes two more DDR-II controllers providing 256MB memory.
+
+2.4	I2C
+	Bus1:
+		AD7418 @ 0x50 for voltage/temp. monitoring.
+		SX8650 @ 0x90 touch controller for HMI.
+		EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics.
+	Bus2:
+		mPCIe SMBus
+		SiI9022A @ 0x72/0xC0 HDMI transmitter.
+		TCA6416A @ 0x40 + 0x42 16-Bit I/O expander.
+		LMH1983 @ 0xCA video PLL.
+		DS1338C @ 0xD0 real-time clock with embedded crystal.
+		9FG104 @ 0xDC 4x 100MHz LVDS SerDes reference clock.
+
+3	Flash layout.
+
+	reset vector is 0x00000100, i.e. low boot.
+
+	00000000	u-boot binary.
+	00100000	FPGA raw bit file.
+	00300000	FIT image holding kernel, dtb and rescue squashfs.
+	03d00000	u-boot environment.
+	03e00000	splash image
+
+	mtd partitions are propagated to linux kernel via device tree blob.
diff --git a/board/matrix_vision/mvbc_p/README.mvbc_p b/board/matrix_vision/mvbc_p/README.mvbc_p
new file mode 100644
index 00000000000..a691137550e
--- /dev/null
+++ b/board/matrix_vision/mvbc_p/README.mvbc_p
@@ -0,0 +1,73 @@
+Matrix Vision mvBlueCOUGAR-P (mvBC-P)
+-------------------------------------
+
+1.	Board Description
+
+	The mvBC-P is a 70x40x40mm multi board gigabit ethernet network camera
+	with main focus on GigEVision protocol in combination with local image
+	preprocessing.
+
+	Power Supply is either VDC 48V or Pover over Ethernet (PoE).
+
+2	System Components
+
+2.1	CPU
+	Freescale MPC5200B CPU running at 400MHz core and 133MHz XLB/IPB.
+	64MB SDRAM @ 133MHz.
+	8 MByte Nor Flash on local bus.
+	1 serial ports. Console running on ttyS0 @ 115200 8N1.
+
+2.2	PCI
+	PCI clock fixed at 66MHz. Arbitration inside FPGA.
+	Intel GD82541ER network MAC/PHY and FPGA connected.
+
+2.3	FPGA
+	Altera Cyclone-II EP2C8 with PCI DMA engine.
+	Connects to Matrix Vision specific CCD/CMOS sensor interface.
+	Utilizes 64MB Nand Flash.
+
+2.3.1	I/O @ FPGA
+	2 Outputs : photo coupler
+	2 Inputs  : photo coupler
+
+2.4	I2C
+	LM75 @ 0x90 for temperature monitoring.
+	EEPROM @ 0xA0 for vendor specifics.
+	image sensor interface (slave addresses depend on sensor)
+
+3	Flash layout.
+
+	reset vector is 0x00000100, i.e. "LOWBOOT".
+
+	FF800000	u-boot
+	FF840000	u-boot script image
+	FF850000	redundant u-boot script image
+	FF860000	FPGA raw bit file
+	FF8A0000	tbd.
+	FF900000	root FS
+	FFC00000	kernel
+	FFFC0000	device tree blob
+	FFFD0000	redundant device tree blob
+	FFFE0000	environment
+	FFFF0000	redundant environment
+
+	mtd partitions are propagated to linux kernel via device tree blob.
+
+4	Booting
+
+	On startup the bootscript @ FF840000 is executed. This script can be
+	exchanged easily. Default boot mode is "boot from flash", i.e. system
+	works stand-alone.
+
+	This behaviour depends on some environment variables :
+
+	"netboot" : yes ->try dhcp/bootp and boot from network.
+	A "dhcp_client_id" and "dhcp_vendor-class-identifier" can be used for
+	DHCP server configuration, e.g. to provide different images to
+	different devices.
+
+	During netboot the system tries to get 3 image files:
+	1. Kernel - name + data is given during BOOTP.
+	2. Initrd - name is stored in "initrd_name"
+	3. device tree blob - name is stored in "dtb_name"
+	Fallback files are the flash versions.
diff --git a/board/matrix_vision/mvblm7/README.mvblm7 b/board/matrix_vision/mvblm7/README.mvblm7
new file mode 100644
index 00000000000..a0686f7fa57
--- /dev/null
+++ b/board/matrix_vision/mvblm7/README.mvblm7
@@ -0,0 +1,84 @@
+Matrix Vision mvBlueLYNX-M7 (mvBL-M7)
+-------------------------------------
+
+1.	Board Description
+
+	The mvBL-M7 is a 120x120mm single board computing platform
+	with strong focus on stereo image processing applications.
+
+	Power Supply is either VDC 12-48V or Pover over Ethernet (PoE)
+	on any port (requires add-on board).
+
+2	System Components
+
+2.1	CPU
+	Freescale MPC8343VRAGDB CPU running at 400MHz core and 266MHz csb.
+	512MByte DDR-II memory @ 133MHz.
+	8 MByte Nor Flash on local bus.
+	2 Vitesse VSC8601 RGMII ethernet Phys.
+	1 USB host controller over ULPI I/F.
+	2 serial ports. Console running on ttyS0 @ 115200 8N1.
+	1 SD-Card slot connected to SPI.
+	System configuration (HRCW) is taken from I2C EEPROM.
+
+2.2	PCI
+	A miniPCI Type-III socket is present. PCI clock fixed at 66MHz.
+
+2.3	FPGA
+	Altera Cyclone-II EP2C20/35 with PCI DMA engines.
+	Connects to dual Matrix Vision specific CCD/CMOS sensor interfaces.
+	Utilizes another 256MB DDR-II memory and 32-128MB Nand Flash.
+
+2.3.1	I/O @ FPGA
+	2x8 Outputs : Infineon High-Side Switches to Main Supply.
+	2x8 Inputs  : Programmable input threshold + trigger capabilities
+	2 dedicated flash interfaces for illuminator boards.
+	Cross trigger for chaining several boards.
+
+2.4	I2C
+	Bus1:
+		MAX5381 DAC @ 0x60 for 1st digital input threshold.
+		LM75 @ 0x90 for temperature monitoring.
+		EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics.
+		1st image sensor interface (slave addresses depend on sensor)
+	Bus2:
+		MAX5381 DAC @ 0x60 for 2nd digital input threshold.
+		2nd image sensor interface (slave addresses depend on sensor)
+
+3	Flash layout.
+
+	reset vector is 0xFFF00100, i.e. "HIGHBOOT".
+
+	FF800000	environment
+	FF802000	redundant environment
+	FF804000	u-boot script image
+	FF806000	redundant u-boot script image
+	FF808000	device tree blob
+	FF80A000	redundant device tree blob
+	FF80C000	tbd.
+	FF80E000	tbd.
+	FF810000	kernel
+	FFC00000	root FS
+	FFF00000	u-boot
+	FFF80000	FPGA raw bit file
+
+	mtd partitions are propagated to linux kernel via device tree blob.
+
+4	Booting
+
+	On startup the bootscript @ FF804000 is executed. This script can be
+	exchanged easily. Default boot mode is "boot from flash", i.e. system
+	works stand-alone.
+
+	This behaviour depends on some environment variables :
+
+	"netboot" : yes ->try dhcp/bootp and boot from network.
+	A "dhcp_client_id" and "dhcp_vendor-class-identifier" can be used for
+	DHCP server configuration, e.g. to provide different images to
+	different devices.
+
+	During netboot the system tries to get 3 image files:
+	1. Kernel - name + data is given during BOOTP.
+	2. Initrd - name is stored in "initrd_name"
+	3. device tree blob - name is stored in "dtb_name"
+	Fallback files are the flash versions.
diff --git a/board/matrix_vision/mvsmr/README.mvsmr b/board/matrix_vision/mvsmr/README.mvsmr
new file mode 100644
index 00000000000..8e34cb78385
--- /dev/null
+++ b/board/matrix_vision/mvsmr/README.mvsmr
@@ -0,0 +1,55 @@
+Matrix Vision mvSMR
+-------------------
+
+1.	Board Description
+
+	The mvSMR is a 75x130mm single image processing board used
+	in automation. Power Supply is 24VDC.
+
+2	System Components
+
+2.1	CPU
+	Freescale MPC5200B CPU running at 400MHz core and 133MHz XLB/IPB.
+	64MB DDR-I @ 133MHz.
+	8 MByte Nor Flash on local bus.
+	2 serial ports. Console running on ttyS0 @ 115200 8N1.
+
+2.2	PCI
+	PCI clock fixed at 33MHz due to old'n'slow Xilinx PCI core.
+
+2.3	FPGA
+	Xilinx Spartan-3 XC3S200 with PCI DMA engine.
+	Connects to Matrix Vision specific CCD/CMOS sensor interface.
+
+2.4	I2C
+	EEPROM @ 0xA0 for vendor specifics.
+	image sensor interface (slave addresses depend on sensor)
+
+3	Flash layout.
+
+	reset vector is 0x00000100, i.e. "LOWBOOT".
+
+	FF800000	u-boot
+	FF806000	u-boot script image
+	FF808000	u-boot environment
+	FF840000	FPGA raw bit file
+	FF880000	root FS
+	FFF00000	kernel
+
+4	Booting
+
+	On startup the bootscript @ FF806000 is executed. This script can be
+	exchanged easily. Default boot mode is "boot from flash", i.e. system
+	works stand-alone.
+
+	This behaviour depends on some environment variables :
+
+	"netboot" : yes ->try dhcp/bootp and boot from network.
+	A "dhcp_client_id" and "dhcp_vendor-class-identifier" can be used for
+	DHCP server configuration, e.g. to provide different images to
+	different devices.
+
+	During netboot the system tries to get 3 image files:
+	1. Kernel - name + data is given during BOOTP.
+	2. Initrd - name is stored in "initrd_name"
+	Fallback files are the flash versions.