PXA: Drop csb226 and innokom boards (unmaintained)

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Robert Schwebel <robert@schwebel.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>

1 files changed, 0 insertions, 421 deletions

diff --git a/board/innokom/flash.c b/board/innokom/flash.c
deleted file mode 100644
index ed4b9872a2..0000000000
--- a/board/innokom/flash.c
+++ /dev/null
@@ -1,421 +0,0 @@
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de>
- *
- * (C) Copyright 2002
- * Auerswald GmbH & Co KG, Germany
- * Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/pxa-regs.h>
-
-/* Debugging macros ------------------------------------------------------  */
-
-#undef FLASH_DEBUG
-
-/* Some debug macros */
-#if (FLASH_DEBUG > 2 )
-#define PRINTK3(args...) printf(args)
-#else
-#define PRINTK3(args...)
-#endif
-
-#if FLASH_DEBUG > 1
-#define PRINTK2(args...) printf(args)
-#else
-#define PRINTK2(args...)
-#endif
-
-#ifdef FLASH_DEBUG
-#define PRINTK(args...) printf(args)
-#else
-#define PRINTK(args...)
-#endif
-
-/* ------------------------------------------------------------------------ */
-
-/* Development system: we have only 16 MB Flash                             */
-#ifdef CONFIG_MTD_INNOKOM_16MB
-#define FLASH_BANK_SIZE 0x01000000	/* 16 MB (during development)       */
-#define MAIN_SECT_SIZE  0x00020000	/* 128k per sector                  */
-#endif
-
-/* Production system: we have 64 MB Flash                                   */
-#ifdef CONFIG_MTD_INNOKOM_64MB
-#define FLASH_BANK_SIZE 0x04000000	/* 64 MB                            */
-#define MAIN_SECT_SIZE  0x00020000	/* 128k per sector                  */
-#endif
-
-flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/**
- * flash_init: - initialize data structures for flash chips
- *
- * @return: size of the flash
- */
-
-ulong flash_init(void)
-{
-	int i, j;
-	ulong size = 0;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		ulong flashbase = 0;
-		flash_info[i].flash_id =
-			(INTEL_MANUFACT & FLASH_VENDMASK) |
-			(INTEL_ID_28F128J3 & FLASH_TYPEMASK);
-		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-		memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-
-		switch (i) {
-			case 0:
-				flashbase = PHYS_FLASH_1;
-				break;
-			default:
-				panic("configured too many flash banks!\n");
-				break;
-		}
-		for (j = 0; j < flash_info[i].sector_count; j++) {
-			flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
-		}
-		size += flash_info[i].size;
-	}
-
-	/* Protect u-boot sectors */
-	flash_protect(FLAG_PROTECT_SET,
-			CONFIG_SYS_FLASH_BASE,
-			CONFIG_SYS_FLASH_BASE + (256*1024) - 1,
-			&flash_info[0]);
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-	flash_protect(FLAG_PROTECT_SET,
-			CONFIG_ENV_ADDR,
-			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
-			&flash_info[0]);
-#endif
-
-	return size;
-}
-
-
-/**
- * flash_print_info: - print information about the flash situation
- *
- * @param info:
- */
-
-void flash_print_info  (flash_info_t *info)
-{
-	int i, j;
-
-	for (j=0; j<CONFIG_SYS_MAX_FLASH_BANKS; j++) {
-
-		switch (info->flash_id & FLASH_VENDMASK) {
-
-			case (INTEL_MANUFACT & FLASH_VENDMASK):
-				printf("Intel: ");
-				break;
-			default:
-				printf("Unknown Vendor ");
-				break;
-		}
-
-		switch (info->flash_id & FLASH_TYPEMASK) {
-
-			case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
-				printf("28F128J3 (128Mbit)\n");
-				break;
-			default:
-				printf("Unknown Chip Type\n");
-				return;
-		}
-
-		printf("  Size: %ld MB in %d Sectors\n",
-			info->size >> 20, info->sector_count);
-
-		printf("  Sector Start Addresses:");
-		for (i = 0; i < info->sector_count; i++) {
-			if ((i % 5) == 0) printf ("\n   ");
-
-			printf (" %08lX%s", info->start[i],
-				info->protect[i] ? " (RO)" : "     ");
-		}
-		printf ("\n");
-		info++;
-	}
-}
-
-
-/**
- * flash_erase: - erase flash sectors
- *
- */
-
-int flash_erase(flash_info_t *info, int s_first, int s_last)
-{
-	int flag, prot, sect;
-	int rc = ERR_OK;
-	ulong start;
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return ERR_UNKNOWN_FLASH_TYPE;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		return ERR_INVAL;
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK))
-		return ERR_UNKNOWN_FLASH_VENDOR;
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) prot++;
-	}
-
-	if (prot) return ERR_PROTECTED;
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-
-	flag = disable_interrupts();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
-
-		printf("Erasing sector %2d ... ", sect);
-
-		PRINTK("\n");
-
-		/* arm simple, non interrupt dependent timer */
-		start = get_timer(0);
-
-		if (info->protect[sect] == 0) {	/* not protected */
-			u16 * volatile addr = (u16 * volatile)(info->start[sect]);
-
-			PRINTK("unlocking sector\n");
-			*addr = 0x0060;
-			*addr = 0x00d0;
-			*addr = 0x00ff;
-
-			PRINTK("erasing sector\n");
-			*addr = 0x0020;
-			PRINTK("confirming erase\n");
-			*addr = 0x00D0;
-
-			while ((*addr & 0x0080) != 0x0080) {
-				PRINTK(".");
-				if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-					*addr = 0x00B0; /* suspend erase*/
-					*addr = 0x00FF; /* read mode    */
-					rc = ERR_TIMOUT;
-					goto outahere;
-				}
-			}
-
-			PRINTK("clearing status register\n");
-			*addr = 0x0050;
-			PRINTK("resetting to read mode");
-			*addr = 0x00FF;
-		}
-
-		printf("ok.\n");
-	}
-
-	if (ctrlc()) printf("User Interrupt!\n");
-
-	outahere:
-
-	/* allow flash to settle - wait 10 ms */
-	udelay_masked(10000);
-
-	if (flag) enable_interrupts();
-
-	return rc;
-}
-
-
-/**
- * write_word: - copy memory to flash
- *
- * @param info:
- * @param dest:
- * @param data:
- * @return:
- */
-
-static int write_word (flash_info_t *info, ulong dest, ushort data)
-{
-	volatile u16 *addr = (u16 *)dest, val;
-	int rc = ERR_OK;
-	int flag;
-	ulong start;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) return ERR_NOT_ERASED;
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-	flag = disable_interrupts();
-
-	/* clear status register command */
-	*addr = 0x50;
-
-	/* program set-up command */
-	*addr = 0x40;
-
-	/* latch address/data */
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait while polling the status register */
-	while(((val = *addr) & 0x80) != 0x80) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			rc = ERR_TIMOUT;
-			*addr = 0xB0; /* suspend program command */
-			goto outahere;
-		}
-	}
-
-	if(val & 0x1A) {	/* check for error */
-		printf("\nFlash write error %02x at address %08lx\n",
-			(int)val, (unsigned long)dest);
-		if(val & (1<<3)) {
-			printf("Voltage range error.\n");
-			rc = ERR_PROG_ERROR;
-			goto outahere;
-		}
-		if(val & (1<<1)) {
-			printf("Device protect error.\n");
-			rc = ERR_PROTECTED;
-			goto outahere;
-		}
-		if(val & (1<<4)) {
-			printf("Programming error.\n");
-			rc = ERR_PROG_ERROR;
-			goto outahere;
-		}
-		rc = ERR_PROG_ERROR;
-		goto outahere;
-	}
-
-	outahere:
-
-	*addr = 0xFF; /* read array command */
-	if (flag) enable_interrupts();
-
-	return rc;
-}
-
-
-/**
- * write_buf: - Copy memory to flash.
- *
- * @param info:
- * @param src:	source of copy transaction
- * @param addr:	where to copy to
- * @param cnt:	number of bytes to copy
- *
- * @return	error code
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	ushort data;
-	int l;
-	int i, rc;
-
-	wp = (addr & ~1);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data >> 8) | (*(uchar *)cp << 8);
-		}
-		for (; i<2 && cnt>0; ++i) {
-			data = (data >> 8) | (*src++ << 8);
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<2; ++i, ++cp) {
-			data = (data >> 8) | (*(uchar *)cp << 8);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 2;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 2) {
-		/* data = *((vushort*)src); */
-		data = *((ushort*)src);
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		src += 2;
-		wp  += 2;
-		cnt -= 2;
-	}
-
-	if (cnt == 0) return ERR_OK;
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
-		data = (data >> 8) | (*src++ << 8);
-		--cnt;
-	}
-	for (; i<2; ++i, ++cp) {
-		data = (data >> 8) | (*(uchar *)cp << 8);
-	}
-
-	return write_word(info, wp, data);
-}