mcx: remove board

This board still doesn't select CONFIG_DM and seems to be umaintained.
As it makes progress on modernizing several DaVinci drivers more
difficult and the maintainer has not expressed interest in updating
it, this patch proposes to remove it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

1 files changed, 0 insertions, 141 deletions

diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c
deleted file mode 100644
index ee29fe7cf90..00000000000
--- a/board/htkw/mcx/mcx.c
+++ /dev/null
@@ -1,141 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2011 Ilya Yanok, Emcraft Systems
- *
- * Based on ti/evm/evm.c
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/mach-types.h>
-#include <asm/gpio.h>
-#include <asm/omap_gpio.h>
-#include <asm/arch/dss.h>
-#include <asm/arch/clock.h>
-#include <errno.h>
-#include <i2c.h>
-#ifdef CONFIG_USB_EHCI_HCD
-#include <usb.h>
-#include <asm/ehci-omap.h>
-#endif
-#include "mcx.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define HOT_WATER_BUTTON	42
-#define LCD_OUTPUT		55
-
-/* Address of the framebuffer in RAM. */
-#define FB_START_ADDRESS 0x88000000
-
-#ifdef CONFIG_USB_EHCI_HCD
-static struct omap_usbhs_board_data usbhs_bdata = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-};
-
-int ehci_hcd_init(int index, enum usb_init_type init,
-		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
-	return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
-}
-
-int ehci_hcd_stop(int index)
-{
-	return omap_ehci_hcd_stop();
-}
-#endif
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
-	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
-	/* boot param addr */
-	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
-	gpio_direction_output(LCD_OUTPUT, 0);
-
-	return 0;
-}
-
-#ifdef CONFIG_BOARD_LATE_INIT
-int board_late_init(void)
-{
-	if (gpio_request(HOT_WATER_BUTTON, "hot-water-button") < 0) {
-		puts("Failed to get hot-water-button pin\n");
-		return -ENODEV;
-	}
-	gpio_direction_input(HOT_WATER_BUTTON);
-
-	/*
-	 * if hot-water-button is pressed
-	 * change bootcmd
-	 */
-	if (gpio_get_value(HOT_WATER_BUTTON))
-		return 0;
-
-	env_set("bootcmd", "run swupdate");
-
-	return 0;
-}
-#endif
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- *		hardware. Many pins need to be moved from protect to primary
- *		mode.
- */
-void set_muxconf_regs(void)
-{
-	MUX_MCX();
-}
-
-#if defined(CONFIG_MMC_OMAP_HS)
-int board_mmc_init(bd_t *bis)
-{
-	return omap_mmc_init(0, 0, 0, -1, -1);
-}
-#endif
-
-#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
-
-static struct panel_config lcd_cfg = {
-	.timing_h       = PANEL_TIMING_H(40, 40, 48),
-	.timing_v       = PANEL_TIMING_V(29, 13, 3),
-	.pol_freq       = 0x00003000, /* Pol Freq */
-	.divisor        = 0x0001000E,
-	.panel_type     = 0x01, /* TFT */
-	.data_lines     = 0x03, /* 24 Bit RGB */
-	.load_mode      = 0x02, /* Frame Mode */
-	.panel_color	= 0,
-	.lcd_size	= PANEL_LCD_SIZE(800, 480),
-	.gfx_format	= GFXFORMAT_RGB24_UNPACKED,
-};
-
-int board_video_init(void)
-{
-	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
-	void *fb;
-
-	fb = (void *)FB_START_ADDRESS;
-
-	lcd_cfg.frame_buffer = fb;
-
-	setbits_le32(&prcm_base->fclken_dss, FCK_DSS_ON);
-	setbits_le32(&prcm_base->iclken_dss, ICK_DSS_ON);
-
-	omap3_dss_panel_config(&lcd_cfg);
-	omap3_dss_enable();
-
-	return 0;
-}
-#endif