* Some code cleanup

* Patch by Josef Baumgartner, 10 Feb 2004:
  Fixes for Coldfire port

* Patch by Brad Kemp, 11 Feb 2004:
  Fix CFI flash driver problems

1 files changed, 72 insertions, 79 deletions

diff --git a/board/gen860t/gen860t.c b/board/gen860t/gen860t.c
index 434055ce678..f1d173ebc97 100644
--- a/board/gen860t/gen860t.c
+++ b/board/gen860t/gen860t.c
@@ -94,7 +94,7 @@ const uint sdram_upm_table[] = {
 	0xfffffc05, 0xffffffff, 0xffffffff, 0xffffffff,
 	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
 	/* exception     (offset 0x3C in upm ram) */
-   };
+};
 
 const uint selectmap_upm_table[] = {
 	/* single read   (offset 0x00 in upm ram) */
@@ -124,63 +124,61 @@ const uint selectmap_upm_table[] = {
 /*
  * Check board identity.  Always successful (gives information only)
  */
-int
-checkboard(void)
+int checkboard (void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
-    unsigned char *s;
-    unsigned char buf[64];
-    int i;
+	unsigned char *s;
+	unsigned char buf[64];
+	int i;
 
-    i = getenv_r("board_id", buf, sizeof(buf));
-    s = (i>0) ? buf : NULL;
+	i = getenv_r ("board_id", buf, sizeof (buf));
+	s = (i > 0) ? buf : NULL;
 
 	if (s) {
-		printf("%s ", s);
+		printf ("%s ", s);
 	} else {
-		printf("<unknown> ");
+		printf ("<unknown> ");
 	}
 
-    i = getenv_r("serial#", buf, sizeof(buf));
-    s = (i>0) ? buf : NULL;
+	i = getenv_r ("serial#", buf, sizeof (buf));
+	s = (i > 0) ? buf : NULL;
 
 	if (s) {
-		printf("S/N %s\n", s);
+		printf ("S/N %s\n", s);
 	} else {
-		printf("S/N <unknown>\n");
+		printf ("S/N <unknown>\n");
 	}
 
-    printf("CPU at %s MHz, ",strmhz(buf, gd->cpu_clk));
-	printf("local bus at %s MHz\n", strmhz(buf, gd->bus_clk));
-    return (0);
+	printf ("CPU at %s MHz, ", strmhz (buf, gd->cpu_clk));
+	printf ("local bus at %s MHz\n", strmhz (buf, gd->bus_clk));
+	return (0);
 }
 
 /*
  * Initialize SDRAM
  */
-long int
-initdram(int board_type)
+long int initdram (int board_type)
 {
-    volatile immap_t     *immr  = (immap_t *)CFG_IMMR;
-    volatile memctl8xx_t *memctl = &immr->im_memctl;
-
-    upmconfig(UPMA,
-			  (uint *)sdram_upm_table,
-			  sizeof(sdram_upm_table) / sizeof(uint)
-			 );
-
-    /*
-     * Setup MAMR register
-     */
-    memctl->memc_mptpr = CFG_MPTPR_1BK_8K;
-    memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
-
-    /*
-     * Map CS1* to SDRAM bank
-     */
-    memctl->memc_or1 = CFG_OR1;
-    memctl->memc_br1 = CFG_BR1;
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immr->im_memctl;
+
+	upmconfig (UPMA,
+		   (uint *) sdram_upm_table,
+		   sizeof (sdram_upm_table) / sizeof (uint)
+		);
+
+	/*
+	 * Setup MAMR register
+	 */
+	memctl->memc_mptpr = CFG_MPTPR_1BK_8K;
+	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+
+	/*
+	 * Map CS1* to SDRAM bank
+	 */
+	memctl->memc_or1 = CFG_OR1;
+	memctl->memc_br1 = CFG_BR1;
 
 	/*
 	 * Perform SDRAM initialization sequence:
@@ -193,31 +191,31 @@ initdram(int board_type)
 	 * Program SDRAM for standard operation, sequential burst, burst length
 	 * of 4, CAS latency of 2.
 	 */
-    memctl->memc_mar = 0x00000000;
+	memctl->memc_mar = 0x00000000;
 	memctl->memc_mcr = MCR_UPM_A | MCR_OP_RUN | MCR_MB_CS1 |
-					   MCR_MLCF(0) | UPMA_NOP_ADDR;
-	udelay(200);
-    memctl->memc_mar = 0x00000000;
+		MCR_MLCF (0) | UPMA_NOP_ADDR;
+	udelay (200);
+	memctl->memc_mar = 0x00000000;
 	memctl->memc_mcr = MCR_UPM_A | MCR_OP_RUN | MCR_MB_CS1 |
-					   MCR_MLCF(4) | UPMA_PRECHARGE_ADDR;
+		MCR_MLCF (4) | UPMA_PRECHARGE_ADDR;
 
-    memctl->memc_mar = 0x00000000;
+	memctl->memc_mar = 0x00000000;
 	memctl->memc_mcr = MCR_UPM_A | MCR_OP_RUN | MCR_MB_CS1 |
-					   MCR_MLCF(2) | UPM_REFRESH_ADDR;
+		MCR_MLCF (2) | UPM_REFRESH_ADDR;
 
-    memctl->memc_mar = 0x00000088;
+	memctl->memc_mar = 0x00000088;
 	memctl->memc_mcr = MCR_UPM_A | MCR_OP_RUN | MCR_MB_CS1 |
-					   MCR_MLCF(1) | UPMA_MRS_ADDR;
+		MCR_MLCF (1) | UPMA_MRS_ADDR;
 
-    memctl->memc_mar = 0x00000000;
+	memctl->memc_mar = 0x00000000;
 	memctl->memc_mcr = MCR_UPM_A | MCR_OP_RUN | MCR_MB_CS1 |
-					   MCR_MLCF(0) | UPMA_NOP_ADDR;
+		MCR_MLCF (0) | UPMA_NOP_ADDR;
 	/*
 	 * Enable refresh
 	 */
-    memctl->memc_mamr |= MAMR_PTAE;
+	memctl->memc_mamr |= MAMR_PTAE;
 
-    return (SDRAM_SIZE);
+	return (SDRAM_SIZE);
 }
 
 /*
@@ -225,42 +223,39 @@ initdram(int board_type)
  * The DOC lives in the CS2* space
  */
 #if (CONFIG_COMMANDS & CFG_CMD_DOC)
-extern void
-doc_probe(ulong physadr);
+extern void doc_probe (ulong physadr);
 
-void
-doc_init(void)
+void doc_init (void)
 {
-	printf("Probing at 0x%.8x: ", DOC_BASE);
-	doc_probe(DOC_BASE);
+	printf ("Probing at 0x%.8x: ", DOC_BASE);
+	doc_probe (DOC_BASE);
 }
 #endif
 
 /*
  * Miscellaneous intialization
  */
-int
-misc_init_r (void)
+int misc_init_r (void)
 {
-    volatile immap_t     *immr  = (immap_t *)CFG_IMMR;
-    volatile memctl8xx_t *memctl = &immr->im_memctl;
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immr->im_memctl;
 
 	/*
 	 * Set up UPMB to handle the Virtex FPGA SelectMap interface
 	 */
-	upmconfig(UPMB, (uint *)selectmap_upm_table,
-			  sizeof(selectmap_upm_table) / sizeof(uint));
+	upmconfig (UPMB, (uint *) selectmap_upm_table,
+		   sizeof (selectmap_upm_table) / sizeof (uint));
 
-    memctl->memc_mbmr = 0x0;
+	memctl->memc_mbmr = 0x0;
 
-	config_mpc8xx_ioports(immr);
+	config_mpc8xx_ioports (immr);
 
 #if (CONFIG_COMMANDS & CFG_CMD_MII)
-	mii_init();
+	mii_init ();
 #endif
 
 #if (CONFIG_FPGA)
-	gen860t_init_fpga();
+	gen860t_init_fpga ();
 #endif
 	return 0;
 }
@@ -268,8 +263,7 @@ misc_init_r (void)
 /*
  * Final init hook before entering command loop.
  */
-int
-last_stage_init(void)
+int last_stage_init (void)
 {
 #if !defined(CONFIG_SC)
 	unsigned char buf[256];
@@ -278,15 +272,15 @@ last_stage_init(void)
 	/*
 	 * Turn the beeper volume all the way down in case this is a warm boot.
 	 */
-	set_beeper_volume(-64);
-	init_beeper();
+	set_beeper_volume (-64);
+	init_beeper ();
 
 	/*
 	 * Read the environment to see what to do with the beeper
 	 */
-    i = getenv_r("beeper", buf, sizeof(buf));
+	i = getenv_r ("beeper", buf, sizeof (buf));
 	if (i > 0) {
-		do_beeper(buf);
+		do_beeper (buf);
 	}
 #endif
 	return 0;
@@ -295,11 +289,10 @@ last_stage_init(void)
 /*
  * Stub to make POST code happy.  Can't self-poweroff, so just hang.
  */
-void
-board_poweroff(void)
+void board_poweroff (void)
 {
-	puts("### Please power off the board ###\n");
-    while (1);
+	puts ("### Please power off the board ###\n");
+	while (1);
 }
 
 #ifdef CONFIG_POST
@@ -307,9 +300,9 @@ board_poweroff(void)
  * Returns 1 if keys pressed to start the power-on long-running tests
  * Called from board_init_f().
  */
-int post_hotkeys_pressed(void)
+int post_hotkeys_pressed (void)
 {
-	return 0;	/* No hotkeys supported */
+	return 0;		/* No hotkeys supported */
 }
 #endif