P1010RDB: Drop support for not-CONFIG_SYS_DDR_RAW_TIMING

All platforms today define CONFIG_SYS_DDR_RAW_TIMING, so drop the code
for this option being unset.

Cc: Qiang Zhao <qiang.zhao@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 138 deletions

diff --git a/board/freescale/p1010rdb/ddr.c b/board/freescale/p1010rdb/ddr.c
index 2625195f81..b423ec8e21 100644
--- a/board/freescale/p1010rdb/ddr.c
+++ b/board/freescale/p1010rdb/ddr.c
@@ -16,142 +16,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifndef CONFIG_SYS_DDR_RAW_TIMING
-#define CONFIG_SYS_DRAM_SIZE	1024
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_800,
-	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_667 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_667,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_667,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_667,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_667,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_667,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_667,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_667,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_667,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_667,
-	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fixed_ddr_parm_t fixed_ddr_parm_0[] = {
-	{750, 850, &ddr_cfg_regs_800},
-	{607, 749, &ddr_cfg_regs_667},
-	{0, 0, NULL}
-};
-
-unsigned long get_sdram_size(void)
-{
-	struct cpu_type *cpu;
-	phys_size_t ddr_size;
-
-	cpu = gd->arch.cpu;
-	/* P1014 and it's derivatives support max 16it DDR width */
-	if (cpu->soc_ver == SVR_P1014)
-		ddr_size = (CONFIG_SYS_DRAM_SIZE / 2);
-	else
-		ddr_size = CONFIG_SYS_DRAM_SIZE;
-
-	return ddr_size;
-}
-
-/*
- * Fixed sdram init -- doesn't use serial presence detect.
- */
-phys_size_t fixed_sdram(void)
-{
-	int i;
-	char buf[32];
-	fsl_ddr_cfg_regs_t ddr_cfg_regs;
-	phys_size_t ddr_size;
-	ulong ddr_freq, ddr_freq_mhz;
-	struct cpu_type *cpu;
-
-#if defined(CONFIG_SYS_RAMBOOT)
-	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-#endif
-
-	ddr_freq = get_ddr_freq(0);
-	ddr_freq_mhz = ddr_freq / 1000000;
-
-	printf("Configuring DDR for %s MT/s data rate\n",
-				strmhz(buf, ddr_freq));
-
-	for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) {
-		if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) &&
-		   (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) {
-			memcpy(&ddr_cfg_regs, fixed_ddr_parm_0[i].ddr_settings,
-							sizeof(ddr_cfg_regs));
-			break;
-		}
-	}
-
-	if (fixed_ddr_parm_0[i].max_freq == 0)
-		panic("Unsupported DDR data rate %s MT/s data rate\n",
-					strmhz(buf, ddr_freq));
-
-	cpu = gd->arch.cpu;
-	/* P1014 and it's derivatives support max 16bit DDR width */
-	if (cpu->soc_ver == SVR_P1014) {
-		ddr_cfg_regs.ddr_sdram_cfg &= ~SDRAM_CFG_DBW_MASK;
-		ddr_cfg_regs.ddr_sdram_cfg |= SDRAM_CFG_16_BE;
-		/* divide SA and EA by two and then mask the rest so we don't
-		 * write to reserved fields */
-		ddr_cfg_regs.cs[0].bnds = (CONFIG_SYS_DDR_CS0_BNDS >> 1) & 0x0fff0fff;
-	}
-
-	ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-	fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);
-
-	if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size,
-					LAW_TRGT_IF_DDR_1) < 0) {
-		printf("ERROR setting Local Access Windows for DDR\n");
-		return 0;
-	}
-
-	return ddr_size;
-}
-
-#else /* CONFIG_SYS_DDR_RAW_TIMING */
 /*
  * Samsung K4B2G0846C-HCF8
  * The following timing are for "downshift"
@@ -232,5 +96,3 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 		popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
 	}
 }
-
-#endif /* CONFIG_SYS_DDR_RAW_TIMING */