diff options
| author | Peng Fan <peng.fan@nxp.com> | 2019-08-01 06:02:41 +0000 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2019-10-08 16:33:45 +0200 |
| commit | 8a6e1b1dda2a95cc0b675b704faf2188681e363a (patch) | |
| tree | 24994765111563c7f545ab45ccf6ffb2163bde6d /board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | |
| parent | 1d293e6804fe077853636b0517ef00609299936e (diff) | |
imx: mx6ul_14x14_evk: Fix SPL boot
When booting SPL on the board, met boot failure:
"
Trying to boot from MMC2
MMC Device 1 not found
spl: could not find mmc device 1. error: -19
SPL: failed to boot from all boot devices
"
Let's register the two mmc controllers in SPL stage to
avoid boot failure.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Diffstat (limited to 'board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c')
| -rw-r--r-- | board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 16 |
1 files changed, 0 insertions, 16 deletions
diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c index ccbe404478..32f3912751 100644 --- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c +++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c @@ -111,7 +111,6 @@ static iomux_v3_cfg_t const uart1_pads[] = { MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), }; -#ifndef CONFIG_SPL_BUILD static iomux_v3_cfg_t const usdhc1_pads[] = { MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -127,7 +126,6 @@ static iomux_v3_cfg_t const usdhc1_pads[] = { /* RST_B */ MX6_PAD_GPIO1_IO09__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL), }; -#endif /* * mx6ul_14x14_evk board default supports sd card. If want to use @@ -238,19 +236,6 @@ int board_mmc_getcd(struct mmc *mmc) int board_mmc_init(bd_t *bis) { -#ifdef CONFIG_SPL_BUILD -#if defined(CONFIG_MX6UL_14X14_EVK_EMMC_REWORK) - imx_iomux_v3_setup_multiple_pads(usdhc2_emmc_pads, - ARRAY_SIZE(usdhc2_emmc_pads)); -#else - imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); -#endif - gpio_direction_output(USDHC2_PWR_GPIO, 0); - udelay(500); - gpio_direction_output(USDHC2_PWR_GPIO, 1); - usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - return fsl_esdhc_initialize(bis, &usdhc_cfg[1]); -#else int i, ret; /* @@ -297,7 +282,6 @@ int board_mmc_init(bd_t *bis) return ret; } } -#endif return 0; } #endif |