summaryrefslogtreecommitdiff
path: root/board/evb64260
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2012-04-29 23:57:39 +0000
committerWolfgang Denk <wd@denx.de>2012-07-29 15:42:02 +0200
commit702e6014f15b307f144fa03ecaf83a8446c6802a (patch)
tree8c9360248c257f52c1487d9e6cbba3f2dc38e294 /board/evb64260
parent631fea8f2d70aa5eb7c49b33039971dfc61bba88 (diff)
doc: cleanup - move board READMEs into respective board directories
Also drop a few files referring to no longer / not yet supported boards. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Jason Jin <jason.jin@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Diffstat (limited to 'board/evb64260')
-rw-r--r--board/evb64260/README54
-rw-r--r--board/evb64260/README.EVB-64260-750CX7
2 files changed, 61 insertions, 0 deletions
diff --git a/board/evb64260/README b/board/evb64260/README
new file mode 100644
index 00000000000..74211dea439
--- /dev/null
+++ b/board/evb64260/README
@@ -0,0 +1,54 @@
+This file contains status information for the port of U-Boot to the
+Galileo Evaluation Board.
+
+Author: Josh Huber <huber@mclx.com>
+ Mission Critical Linux, Inc.
+
+The support for the Galileo Evaluation board is fairly minimal now.
+It's sufficient to boot Linux, but doesn't provide too much more than
+what's required to do this.
+
+Both DUART channels are supported (to use the second one, you have to
+modify the board -- see the schematics for where to solder on the
+devices module). The ethernet ports are supported, and the MPSC is
+supported as a console driver. (keep in mind that the kernel has no
+support for this yet)
+
+There are still occaisonal lockups with the MPSC console driver due to
+(we think!) overrun problems. If you're looking for something stable
+to use for Linux development, consider sticking with the DUART console
+for now.
+
+Automatic memory sizing mostly works. We've had problems with some
+combinations of memory. Please send us email if you're having trouble
+with respect to the memory detection.
+
+Right now, only the 512k boot flash is supported. Support for the
+16MB flash on the devices module is forthcoming. Right now the flash
+is stored at the 256k boundry in flash, wasting a whole sector (64k!)
+for environment data. This isn't really a big deal since we're not
+using the 512k for anything else. (Just U-Boot and the environment)
+
+Finally, here is a sample output session:
+
+U-Boot 1.0.0-pre1 (Jun 6 2001 - 12:45:11)
+
+Initializing...
+ CPU: MPC7400 (altivec enabled) v2.9
+ Board: EVB64260
+ DRAM: 256 MB
+ FLASH: 512 kB
+ In: serial
+ Out: serial
+ Err: serial
+
+=>
+
+The default configuration should be correct for the evaluation board,
+as it's shipped from Galileo. Keep in mind that the default baudrate
+is set to 38400, 8N1.
+
+Good luck, and make sure to send any bugreports to us (or the
+u-boot-users list).
+
+Josh
diff --git a/board/evb64260/README.EVB-64260-750CX b/board/evb64260/README.EVB-64260-750CX
new file mode 100644
index 00000000000..5ea38eaea3a
--- /dev/null
+++ b/board/evb64260/README.EVB-64260-750CX
@@ -0,0 +1,7 @@
+The EVB-64260-750CX is quite similar to the EVB-64260-BP already
+supported except the following differences:
+* It has an IBM-750CXe soldiered on board instead of the slot-1 in the
+ BP.
+* It has a single PCI male connector instead of the 4 PCI female
+ connectors on the BP. It also gets power trough the PCI connector.
+* It has only a single DIMM slot instead of the 2 slots in the BP.