summaryrefslogtreecommitdiff
path: root/board/esd/pmc440/pmc440.c
diff options
context:
space:
mode:
authorJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>2008-10-16 15:01:15 +0200
committerWolfgang Denk <wd@denx.de>2008-10-18 21:54:03 +0200
commit6d0f6bcf337c5261c08fabe12982178c2c489d76 (patch)
treeae13958ffa9c6b58c2ea97aac07a4ad2f04a350f /board/esd/pmc440/pmc440.c
parent71edc271816ec82cf0550dd6980be2da3cc2ad9e (diff)
rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Diffstat (limited to 'board/esd/pmc440/pmc440.c')
-rw-r--r--board/esd/pmc440/pmc440.c56
1 files changed, 28 insertions, 28 deletions
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
index 85ef26f67b..013815e265 100644
--- a/board/esd/pmc440/pmc440.c
+++ b/board/esd/pmc440/pmc440.c
@@ -44,7 +44,7 @@
DECLARE_GLOBAL_DATA_PTR;
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
ulong flash_get_size(ulong base, int banknum);
int pci_is_66mhz(void);
@@ -71,7 +71,7 @@ struct serial_device *default_serial_console(void)
/* mark scratchreg valid */
scratchreg = (scratchreg & 0xffffff00) | 0x80;
- i = bootstrap_eeprom_read(CFG_I2C_BOOT_EEPROM_ADDR,
+ i = bootstrap_eeprom_read(CONFIG_SYS_I2C_BOOT_EEPROM_ADDR,
0x10, buf, 4);
if ((i != -1) && (buf[0] == 0x19) && (buf[1] == 0x75)) {
scratchreg |= buf[2];
@@ -103,7 +103,7 @@ int board_early_init_f(void)
/*
* Setup the GPIO pins
- * TODO: setup GPIOs via CFG_4xx_GPIO_TABLE in board's config file
+ * TODO: setup GPIOs via CONFIG_SYS_4xx_GPIO_TABLE in board's config file
*/
out32(GPIO0_OR, 0x40000002);
out32(GPIO0_TCR, 0x4c90011f);
@@ -190,7 +190,7 @@ int board_early_init_f(void)
SDR0_CUST0_NDFC_ENABLE |
SDR0_CUST0_NDFC_BW_8_BIT |
SDR0_CUST0_NDFC_ARE_MASK |
- (0x80000000 >> (28 + CFG_NAND_CS));
+ (0x80000000 >> (28 + CONFIG_SYS_NAND_CS));
mtsdr(SDR0_CUST0, sdr0_cust0);
return 0;
@@ -242,7 +242,7 @@ int misc_init_r(void)
#ifdef CONFIG_ENV_IS_IN_FLASH
/* Monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
- -CFG_MONITOR_LEN,
+ -CONFIG_SYS_MONITOR_LEN,
0xffffffff,
&flash_info[0]);
@@ -498,7 +498,7 @@ int pci_pre_init(struct pci_controller *hose)
* inbound map (PIM). But the bootstrap config choices are limited and
* may not be sufficient for a given board.
*/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller *hose)
{
char *ptmla_str, *ptmms_str;
@@ -516,8 +516,8 @@ void pci_target_init(struct pci_controller *hose)
*/
out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */
/* - disabled b4 setting */
- out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
- out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */
+ out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
out32r(PCIX0_PMM0MA, 0xc0000001); /* 1G + No prefetching, */
/* and enable region */
@@ -563,7 +563,7 @@ void pci_target_init(struct pci_controller *hose)
/* Program the board's vendor id */
pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
- CFG_PCI_SUBSYS_VENDORID);
+ CONFIG_SYS_PCI_SUBSYS_VENDORID);
/* disabled for PMC405 backward compatibility */
/* Configure command register as bus master */
@@ -581,9 +581,9 @@ void pci_target_init(struct pci_controller *hose)
if (!is_monarch()) {
/* Program the board's subsystem id/classcode */
pci_write_config_word(0, PCI_SUBSYSTEM_ID,
- CFG_PCI_SUBSYS_ID_NONMONARCH);
+ CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH);
pci_write_config_word(0, PCI_CLASS_SUB_CODE,
- CFG_PCI_CLASSCODE_NONMONARCH);
+ CONFIG_SYS_PCI_CLASSCODE_NONMONARCH);
/* PCI configuration done: release ERREADY */
out_be32((void*)GPIO1_OR,
@@ -593,17 +593,17 @@ void pci_target_init(struct pci_controller *hose)
} else {
/* Program the board's subsystem id/classcode */
pci_write_config_word(0, PCI_SUBSYSTEM_ID,
- CFG_PCI_SUBSYS_ID_MONARCH);
+ CONFIG_SYS_PCI_SUBSYS_ID_MONARCH);
pci_write_config_word(0, PCI_CLASS_SUB_CODE,
- CFG_PCI_CLASSCODE_MONARCH);
+ CONFIG_SYS_PCI_CLASSCODE_MONARCH);
}
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
/*
* pci_master_init
*/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
void pci_master_init(struct pci_controller *hose)
{
unsigned short temp_short;
@@ -620,7 +620,7 @@ void pci_master_init(struct pci_controller *hose)
PCI_COMMAND_MEMORY);
}
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */
static void wait_for_pci_ready(void)
{
@@ -708,7 +708,7 @@ void reset_phy(void)
}
#endif
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
/*
* Input: <dev_addr> I2C address of EEPROM device to enable.
* <state> -1: deliver current state
@@ -720,8 +720,8 @@ void reset_phy(void)
*/
int eeprom_write_enable(unsigned dev_addr, int state)
{
- if ((CFG_I2C_EEPROM_ADDR != dev_addr) &&
- (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr)) {
+ if ((CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) &&
+ (CONFIG_SYS_I2C_BOOT_EEPROM_ADDR != dev_addr)) {
return -1;
} else {
switch (state) {
@@ -743,9 +743,9 @@ int eeprom_write_enable(unsigned dev_addr, int state)
}
return state;
}
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
-#define CFG_BOOT_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS 3
int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
uchar *buffer, unsigned cnt)
{
@@ -753,7 +753,7 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
unsigned blk_off;
int rcode = 0;
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
eeprom_write_enable(dev_addr, 1);
#endif
/*
@@ -776,7 +776,7 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
len = end - offset;
-#define BOOT_EEPROM_PAGE_SIZE (1 << CFG_BOOT_EEPROM_PAGE_WRITE_BITS)
+#define BOOT_EEPROM_PAGE_SIZE (1 << CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS)
#define BOOT_EEPROM_PAGE_OFFSET(x) ((x) & (BOOT_EEPROM_PAGE_SIZE - 1))
maxlen = BOOT_EEPROM_PAGE_SIZE -
@@ -793,11 +793,11 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
buffer += len;
offset += len;
-#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
- udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
+ udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
#endif
}
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
eeprom_write_enable(dev_addr, 0);
#endif
return rcode;
@@ -845,7 +845,7 @@ int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset,
return rcode;
}
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_BOARD_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT)
int usb_board_init(void)
{
char *act = getenv("usbact");
@@ -875,4 +875,4 @@ int usb_board_init_fail(void)
usb_board_stop();
return 0;
}
-#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_BOARD_INIT) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) */