summaryrefslogtreecommitdiff
path: root/board/esd/pmc405
diff options
context:
space:
mode:
authorMatthias Fuchs <matthias.fuchs@esd.eu>2009-02-15 22:26:54 +0100
committerStefan Roese <sr@denx.de>2009-02-18 13:50:29 +0100
commitc553b5f4a0c77fc76e1d25e71c8aaa47657e2d6f (patch)
treef64b2304bbe5a79ebd430844f1abcc677c0e97b1 /board/esd/pmc405
parent5f0320108870e5d62983d1d5c13a2a087dddf686 (diff)
ppc4xx: Cleanup PMC405 board support
This patch fixes coding style for PMC405 board support. Also some unneeded features/code is removed. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'board/esd/pmc405')
-rw-r--r--board/esd/pmc405/pmc405.c95
1 files changed, 25 insertions, 70 deletions
diff --git a/board/esd/pmc405/pmc405.c b/board/esd/pmc405/pmc405.c
index 975b6d6d949..dd58d0124ea 100644
--- a/board/esd/pmc405/pmc405.c
+++ b/board/esd/pmc405/pmc405.c
@@ -40,7 +40,6 @@ const unsigned char fpgadata[] =
};
int filesize = sizeof(fpgadata);
-
int board_early_init_f (void)
{
/*
@@ -55,23 +54,23 @@ int board_early_init_f (void)
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
- mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+ mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
+ mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */
+ mtdcr(uictr, 0x10000000); /* set int trigger levels */
+ mtdcr(uicvcr, 0x00000001); /* set vect base=0, INT0 highest priority */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
/*
- * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
+ * EBC Configuration Register:
+ * set ready timeout to 512 ebc-clks -> ca. 15 us
*/
mtebc (epcr, 0xa8400000);
/*
* Setup GPIO pins
*/
-
mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_FPGA_INIT | \
CONFIG_SYS_FPGA_DONE | \
CONFIG_SYS_XEREADY | \
@@ -85,26 +84,26 @@ int board_early_init_f (void)
}
out32(GPIO0_OR, 0);
- out32(GPIO0_TCR, CONFIG_SYS_FPGA_PRG | CONFIG_SYS_FPGA_CLK | CONFIG_SYS_FPGA_DATA | CONFIG_SYS_XEREADY); /* setup for output */
+ /* setup for output */
+ out32(GPIO0_TCR, CONFIG_SYS_FPGA_PRG | CONFIG_SYS_FPGA_CLK | \
+ CONFIG_SYS_FPGA_DATA | CONFIG_SYS_XEREADY);
- /* - check if rev1_2 is low, then:
- * - set/reset CONFIG_SYS_INTA_FAKE/CONFIG_SYS_SELF_RST in TCR to assert INTA# or SELFRST#
+ /*
+ * - check if rev1_2 is low, then:
+ * - set/reset CONFIG_SYS_INTA_FAKE/CONFIG_SYS_SELF_RST
+ * in TCR to assert INTA# or SELFRST#
*/
-
return 0;
}
-
-/* ------------------------------------------------------------------------- */
-
-
int misc_init_r (void)
{
/* adjust flash start and offset */
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
gd->bd->bi_flashoffset = 0;
- out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_XEREADY); /* deassert EREADY# */
+ /* deassert EREADY# */
+ out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_XEREADY);
return (0);
}
@@ -113,16 +112,16 @@ ushort pmc405_pci_subsys_deviceid(void)
ulong val;
val = in32(GPIO0_IR);
if (!(val & CONFIG_SYS_REV1_2)) { /* low=rev1.2 */
- if (val & CONFIG_SYS_NONMONARCH) { /* monarch# signal */
+ /* check monarch# signal */
+ if (val & CONFIG_SYS_NONMONARCH)
return CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH;
- }
return CONFIG_SYS_PCI_SUBSYS_DEVICEID_MONARCH;
}
return CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH;
}
/*
- * Check Board Identity:
+ * Check Board Identity
*/
int checkboard (void)
{
@@ -133,29 +132,25 @@ int checkboard (void)
puts ("Board: ");
- if (i == -1) {
+ if (i == -1)
puts ("### No HW ID - assuming PMC405");
- } else {
+ else
puts(str);
- }
val = in32(GPIO0_IR);
if (!(val & CONFIG_SYS_REV1_2)) { /* low=rev1.2 */
puts(" rev1.2 (");
- if (val & CONFIG_SYS_NONMONARCH) { /* monarch# signal */
+ if (val & CONFIG_SYS_NONMONARCH) /* monarch# signal */
puts("non-");
- }
puts("monarch)");
- } else {
+ } else
puts(" <=rev1.1");
- }
putc ('\n');
return 0;
}
-/* ------------------------------------------------------------------------- */
void reset_phy(void)
{
#ifdef CONFIG_LXT971_NO_SLEEP
@@ -166,43 +161,3 @@ void reset_phy(void)
lxt971_no_sleep();
#endif
}
-
-
-int do_cantest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- ulong addr;
- volatile uchar *ptr;
- volatile uchar val;
- int i;
-
- addr = simple_strtol (argv[1], NULL, 16) + 0x16;
-
- i = 0;
- for (;;) {
- ptr = (uchar *)addr;
- for (i=0; i<8; i++) {
- *ptr = i;
- val = *ptr;
-
- if (val != i) {
- printf("ERROR: addr=%p write=0x%02X, read=0x%02X\n", ptr, i, val);
- return 0;
- }
-
- /* Abort if ctrl-c was pressed */
- if (ctrlc()) {
- puts("\nAbort\n");
- return 0;
- }
-
- ptr++;
- }
- }
-
- return 0;
-}
-U_BOOT_CMD(
- cantest, 3, 1, do_cantest,
- "Test CAN controller",
- NULL
- );