ppc4xx: remove AR405 board

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>

1 files changed, 0 insertions, 394 deletions

diff --git a/board/esd/ar405/ar405.c b/board/esd/ar405/ar405.c
deleted file mode 100644
index d33aba4713..0000000000
--- a/board/esd/ar405/ar405.c
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * (C) Copyright 2001-2004
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include "ar405.h"
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <command.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void lxt971_no_sleep(void);
-
-/* ------------------------------------------------------------------------- */
-
-#if 0
-#define FPGA_DEBUG
-#endif
-
-/* fpga configuration data - generated by bin2cc */
-const unsigned char fpgadata[] = {
-#include "fpgadata.c"
-};
-
-const unsigned char fpgadata_xl30[] = {
-#include "fpgadata_xl30.c"
-};
-
-/*
- * include common fpga code (for esd boards)
- */
-#include "../common/fpga.c"
-
-
-int board_early_init_f (void)
-{
-	int index, len, i;
-	int status;
-
-#ifdef FPGA_DEBUG
-	/* set up serial port with default baudrate */
-	(void) get_clocks ();
-	gd->baudrate = CONFIG_BAUDRATE;
-	serial_init ();
-	console_init_f ();
-#endif
-
-	/*
-	 * Boot onboard FPGA
-	 */
-	/* first try 40er image */
-	gd->board_type = 40;
-	status = fpga_boot ((unsigned char *) fpgadata, sizeof (fpgadata));
-	if (status != 0) {
-		/* try xl30er image */
-		gd->board_type = 30;
-		status = fpga_boot ((unsigned char *) fpgadata_xl30, sizeof (fpgadata_xl30));
-		if (status != 0) {
-			/* booting FPGA failed */
-#ifndef FPGA_DEBUG
-			/* set up serial port with default baudrate */
-			(void) get_clocks ();
-			gd->baudrate = CONFIG_BAUDRATE;
-			serial_init ();
-			console_init_f ();
-#endif
-			printf ("\nFPGA: Booting failed ");
-			switch (status) {
-			case ERROR_FPGA_PRG_INIT_LOW:
-				printf ("(Timeout: INIT not low after asserting PROGRAM*)\n ");
-				break;
-			case ERROR_FPGA_PRG_INIT_HIGH:
-				printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
-				break;
-			case ERROR_FPGA_PRG_DONE:
-				printf ("(Timeout: DONE not high after programming FPGA)\n ");
-				break;
-			}
-
-			/* display infos on fpgaimage */
-			index = 15;
-			for (i = 0; i < 4; i++) {
-				len = fpgadata[index];
-				printf ("FPGA: %s\n", &(fpgadata[index + 1]));
-				index += len + 3;
-			}
-			putc ('\n');
-			/* delayed reboot */
-			for (i = 20; i > 0; i--) {
-				printf ("Rebooting in %2d seconds \r", i);
-				for (index = 0; index < 1000; index++)
-					udelay (1000);
-			}
-			putc ('\n');
-			do_reset (NULL, 0, 0, NULL);
-		}
-	}
-
-	/*
-	 * IRQ 0-15  405GP internally generated; active high; level sensitive
-	 * IRQ 16    405GP internally generated; active low; level sensitive
-	 * IRQ 17-24 RESERVED
-	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
-	 * IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive
-	 * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive
-	 * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive
-	 * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
-	 * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
-	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
-	 */
-	mtdcr (UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr (UIC0ER, 0x00000000);	/* disable all ints */
-	mtdcr (UIC0CR, 0x00000000);	/* set all to be non-critical */
-	mtdcr (UIC0PR, 0xFFFFFF81);	/* set int polarities */
-	mtdcr (UIC0TR, 0x10000000);	/* set int trigger levels */
-	mtdcr (UIC0VCR, 0x00000001);	/* set vect base=0,INT0 highest priority */
-	mtdcr (UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-
-	out_be16((void *)0xf03000ec, 0x0fff); /* enable interrupts in fpga */
-
-	return 0;
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard (void)
-{
-	int index;
-	int len;
-	char str[64];
-	int i = getenv_f("serial#", str, sizeof (str));
-	const unsigned char *fpga;
-
-	puts ("Board: ");
-
-	if (i == -1) {
-		puts ("### No HW ID - assuming AR405");
-	} else {
-		puts(str);
-	}
-
-	puts ("\nFPGA:  ");
-
-	/* display infos on fpgaimage */
-	if (gd->board_type == 30) {
-		fpga = fpgadata_xl30;
-	} else {
-		fpga = fpgadata;
-	}
-	index = 15;
-	for (i = 0; i < 4; i++) {
-		len = fpga[index];
-		printf ("%s ", &(fpga[index + 1]));
-		index += len + 3;
-	}
-
-	putc ('\n');
-
-	/*
-	 * Disable sleep mode in LXT971
-	 */
-	lxt971_no_sleep();
-
-	return 0;
-}
-
-
-#if 1 /* test-only: some internal test routines... */
-#define DIGEN	((void *)0xf03000b4) /* u8 */
-#define DIGOUT	((void *)0xf03000b0) /* u16 */
-#define DIGIN	((void *)0xf03000a0) /* u16 */
-
-/*
- * Some test routines
- */
-int do_digtest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	int i;
-	int k;
-	int start;
-	int end;
-
-	if (argc != 3) {
-		puts("Usage: digtest n_start n_end (digtest 0 7)\n");
-		return 0;
-	}
-
-	start = simple_strtol (argv[1], NULL, 10);
-	end = simple_strtol (argv[2], NULL, 10);
-
-	/*
-	 * Enable digital outputs
-	 */
-	out_8(DIGEN, 0x08);
-
-	printf("\nStarting digital In-/Out Test from I/O %d to %d (Cntrl-C to abort)...\n",
-	       start, end);
-
-	/*
-	 * Set outputs one by one
-	 */
-	for (;;) {
-		for (i=start; i<=end; i++) {
-			out_be16(DIGOUT, 0x0001 << i);
-			for (k=0; k<200; k++)
-				udelay(1000);
-
-			if (in_be16(DIGIN) != (0x0001 << i)) {
-				printf("ERROR: OUT=0x%04X, IN=0x%04X\n",
-				       0x0001 << i, in_be16(DIGIN));
-				return 0;
-			}
-
-			/* Abort if ctrl-c was pressed */
-			if (ctrlc()) {
-				puts("\nAbort\n");
-				return 0;
-			}
-		}
-	}
-
-	return 0;
-}
-U_BOOT_CMD(
-	digtest,	3,	1,	do_digtest,
-	"Test digital in-/output",
-	""
-);
-
-#define ERROR_DELTA     256
-
-struct io {
-	short val;
-	short dummy;
-};
-
-int do_anatest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	short val;
-	int i;
-	int volt;
-	struct io *out;
-	struct io *in;
-
-	out = (struct io *)0xf0300090;
-	in = (struct io *)0xf0300000;
-
-	i = simple_strtol (argv[1], NULL, 10);
-
-	volt = 0;
-	printf("Setting Channel %d to %dV...\n", i, volt);
-	out_be16((void *)&(out[i].val), (volt * 0x7fff) / 10);
-	udelay(10000);
-	val = in_be16((void *)&(in[i*2].val));
-	printf("-> InChannel %d: 0x%04x=%dV\n", i*2, val, (val * 4000) / 0x7fff);
-	if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
-	    (val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
-		printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
-		       ((volt * 0x7fff) / 40) + ERROR_DELTA);
-		return -1;
-	}
-	val = in_be16((void *)&(in[i*2+1].val));
-	printf("-> InChannel %d: 0x%04x=%dV\n", i*2+1, val, (val * 4000) / 0x7fff);
-	if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
-	    (val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
-		printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
-		       ((volt * 0x7fff) / 40) + ERROR_DELTA);
-		return -1;
-	}
-
-	volt = 5;
-	printf("Setting Channel %d to %dV...\n", i, volt);
-	out_be16((void *)&(out[i].val), (volt * 0x7fff) / 10);
-	udelay(10000);
-	val = in_be16((void *)&(in[i*2].val));
-	printf("-> InChannel %d: 0x%04x=%dV\n", i*2, val, (val * 4000) / 0x7fff);
-	if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
-	    (val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
-		printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
-		       ((volt * 0x7fff) / 40) + ERROR_DELTA);
-		return -1;
-	}
-	val = in_be16((void *)&(in[i*2+1].val));
-	printf("-> InChannel %d: 0x%04x=%dV\n", i*2+1, val, (val * 4000) / 0x7fff);
-	if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
-	    (val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
-		printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
-		       ((volt * 0x7fff) / 40) + ERROR_DELTA);
-		return -1;
-	}
-
-	volt = 10;
-	printf("Setting Channel %d to %dV...\n", i, volt);
-	out_be16((void *)&(out[i].val), (volt * 0x7fff) / 10);
-	udelay(10000);
-	val = in_be16((void *)&(in[i*2].val));
-	printf("-> InChannel %d: 0x%04x=%dV\n", i*2, val, (val * 4000) / 0x7fff);
-	if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
-	    (val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
-		printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
-		       ((volt * 0x7fff) / 40) + ERROR_DELTA);
-		return -1;
-	}
-	val = in_be16((void *)&(in[i*2+1].val));
-	printf("-> InChannel %d: 0x%04x=%dV\n", i*2+1, val, (val * 4000) / 0x7fff);
-	if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
-	    (val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
-		printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
-		       ((volt * 0x7fff) / 40) + ERROR_DELTA);
-		return -1;
-	}
-
-	printf("Channel %d OK!\n", i);
-
-	return 0;
-}
-U_BOOT_CMD(
-	anatest,	2,	1,	do_anatest,
-	"Test analog in-/output",
-	""
-);
-
-
-int counter = 0;
-
-void cyclicInt(void *ptr)
-{
-	out_be16((void *)0xf03000e8, 0x0800); /* ack int */
-	counter++;
-}
-
-
-int do_inctest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	ulong *incin;
-	int i;
-
-	incin = (ulong *)0xf0300040;
-
-	/*
-	 * Clear inc counter
-	 */
-	out_be32((void *)&incin[0], 0);
-	out_be32((void *)&incin[1], 0);
-	out_be32((void *)&incin[2], 0);
-	out_be32((void *)&incin[3], 0);
-
-	incin = (ulong *)0xf0300050;
-
-	/*
-	 * Inc a little
-	 */
-	for (i=0; i<10000; i++) {
-		switch (i & 0x03) {
-		case 0:
-			out_8(DIGEN, 0x02);
-			break;
-		case 1:
-			out_8(DIGEN, 0x03);
-			break;
-		case 2:
-			out_8(DIGEN, 0x01);
-			break;
-		case 3:
-			out_8(DIGEN, 0x00);
-			break;
-		}
-		udelay(10);
-	}
-
-	printf("Inc 0 = %d\n", in_be32((void *)&incin[0]));
-	printf("Inc 1 = %d\n", in_be32((void *)&incin[1]));
-	printf("Inc 2 = %d\n", in_be32((void *)&incin[2]));
-	printf("Inc 3 = %d\n", in_be32((void *)&incin[3]));
-
-	out_be16((void *)0xf03000e0, 0x0c80-1); /* set counter */
-	out_be16((void *)0xf03000ec,
-		 in_be16((void *)0xf03000ec) | 0x0800); /* enable int */
-	irq_install_handler (30, (interrupt_handler_t *) cyclicInt, NULL);
-	printf("counter=%d\n", counter);
-
-	return 0;
-}
-U_BOOT_CMD(
-	inctest,	3,	1,	do_inctest,
-	"Test incremental encoder inputs",
-	""
-);
-#endif