diff options
author | Jagan Teki <jagannadh.teki@gmail.com> | 2017-11-21 00:02:16 +0530 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2017-11-27 10:36:40 +0100 |
commit | 52aaddd6f415397bb2eae0d68a8cc1c5c4a98bb3 (patch) | |
tree | 9370094a6c8c59b0c5fd95cf7619797a3839f43b /board/engicam/isiotmx6ul/README | |
parent | 539b1e228f0dda602e4b64ccbdf0d338988dec6c (diff) |
i.MX6: engicam: Add imx6q/imx6ul boards for existing boards
Add new board names for existing board support
imx6q - icore and icore_rqs boards
imx6ul - geam6ul and isiot boards
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Diffstat (limited to 'board/engicam/isiotmx6ul/README')
-rw-r--r-- | board/engicam/isiotmx6ul/README | 28 |
1 files changed, 0 insertions, 28 deletions
diff --git a/board/engicam/isiotmx6ul/README b/board/engicam/isiotmx6ul/README deleted file mode 100644 index 1d177ac625..0000000000 --- a/board/engicam/isiotmx6ul/README +++ /dev/null @@ -1,28 +0,0 @@ -How to use U-Boot on Engicam Is.IoT MX6UL Starter Kit: ------------------------------------------------------ - -- Configure U-Boot for Engicam Is.IoT MX6UL - -$ make mrproper -$ make imx6ul_isiot_mmc_defconfig -$ make - -This will generate the SPL image called SPL and the u-boot-dtb.img. - -- Flash the SPL image into the micro SD card: - -sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync - -- Flash the u-boot-dtb.img image into the micro SD card: - -sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync - -- Jumper settings: - -MMC Boot: JM3 Closed - -- Connect the Serial cable between the Starter Kit and the PC for the console. -(J28 is the Linux Serial console connector) - -- Insert the micro SD card in the board, power it up and U-Boot messages should -come up. |