diff options
| author | Marek Vasut <marex@denx.de> | 2019-05-17 16:58:51 +0200 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2019-06-11 10:42:48 +0200 |
| commit | 198fee844b0147feeb016aedc44b58069eb5d77e (patch) | |
| tree | 5085c6ef8f5beffefcf0d404ea5e13b67150fa80 /board/dhelectronics | |
| parent | 3a05eb8fee1330caf891fd3f6d12b6316559ca3b (diff) | |
ARM: imx: dh-imx6: Convert SD/MMC support to DM
Enable DM block and DM MMC support on DHCOM iMX6 PDK2.
Convert board code to match the DM support.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Ludwig Zenz <lzenz@dh-electronics.com>
Cc: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'board/dhelectronics')
| -rw-r--r-- | board/dhelectronics/dh_imx6/dh_imx6.c | 59 |
1 files changed, 2 insertions, 57 deletions
diff --git a/board/dhelectronics/dh_imx6/dh_imx6.c b/board/dhelectronics/dh_imx6/dh_imx6.c index 44f4ef8130..193bb0eade 100644 --- a/board/dhelectronics/dh_imx6/dh_imx6.c +++ b/board/dhelectronics/dh_imx6/dh_imx6.c @@ -6,6 +6,8 @@ */ #include <common.h> +#include <dm.h> +#include <dm/device-internal.h> #include <asm/arch/clock.h> #include <asm/arch/crm_regs.h> #include <asm/arch/imx-regs.h> @@ -189,63 +191,6 @@ int board_eth_init(bd_t *bis) } #endif -#ifdef CONFIG_FSL_ESDHC - -#define USDHC2_CD_GPIO IMX_GPIO_NR(6, 16) -#define USDHC3_CD_GPIO IMX_GPIO_NR(7, 8) - -static struct fsl_esdhc_cfg usdhc_cfg[3] = { - { USDHC2_BASE_ADDR }, - { USDHC3_BASE_ADDR }, - { USDHC4_BASE_ADDR }, -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - - switch (cfg->esdhc_base) { - case USDHC2_BASE_ADDR: - return gpio_get_value(USDHC2_CD_GPIO); - case USDHC3_BASE_ADDR: - return !gpio_get_value(USDHC3_CD_GPIO); - case USDHC4_BASE_ADDR: - return 1; /* eMMC/uSDHC4 is always present */ - } - - return 0; -} - -int board_mmc_init(bd_t *bis) -{ - int i, ret; - - /* - * According to the board_mmc_init() the following map is done: - * (U-Boot device node) (Physical Port) - * mmc0 SD interface - * mmc1 micro SD - * mmc2 eMMC - */ - gpio_request(USDHC2_CD_GPIO, "SD2-CD"); - gpio_request(USDHC3_CD_GPIO, "SD3-CD"); - gpio_direction_input(USDHC2_CD_GPIO); - gpio_direction_input(USDHC3_CD_GPIO); - - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); - - for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { - ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); - if (ret) - return ret; - } - - return 0; -} -#endif - #ifdef CONFIG_USB_EHCI_MX6 static void setup_usb(void) { |