summaryrefslogtreecommitdiff
path: root/board/cradle
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-10-09 22:32:26 +0000
committerwdenk <wdenk>2004-10-09 22:32:26 +0000
commit63cfcbb4e20b9091e20d397fd9fee480996424d4 (patch)
treecb4e67e194eb4fc77f1af700879ca36b378f0ce8 /board/cradle
parent1d9f410500f32b04b18b176386e77afacda7acfb (diff)
Patches by himba, 21 Aug 2004:
- fix some "use of label at end of compound statement" warnings - Define type of LCD panel on lubbock board if CONFIG_LCD is used
Diffstat (limited to 'board/cradle')
-rw-r--r--board/cradle/flash.c580
1 files changed, 286 insertions, 294 deletions
diff --git a/board/cradle/flash.c b/board/cradle/flash.c
index d867a11ce3a..f3f9a8ccea8 100644
--- a/board/cradle/flash.c
+++ b/board/cradle/flash.c
@@ -30,338 +30,330 @@
#define FLASH_BANK_SIZE 0x400000
#define MAIN_SECT_SIZE 0x20000
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
/*-----------------------------------------------------------------------
*/
-ulong flash_init(void)
+ulong flash_init (void)
{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
- {
- ulong flashbase = 0;
- flash_info[i].flash_id =
- (INTEL_MANUFACT & FLASH_VENDMASK) |
- (INTEL_ID_28F128J3 & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
- memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
- switch (i)
- {
- case 0:
- flashbase = PHYS_FLASH_1;
- break;
- case 1:
- flashbase = PHYS_FLASH_2;
- break;
- default:
- panic("configured too many flash banks!\n");
- break;
- }
- for (j = 0; j < flash_info[i].sector_count; j++)
- {
- flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
- flash_protect(FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect(FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
- &flash_info[0]);
-
- return size;
+ int i, j;
+ ulong size = 0;
+
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ ulong flashbase = 0;
+
+ flash_info[i].flash_id =
+ (INTEL_MANUFACT & FLASH_VENDMASK) |
+ (INTEL_ID_28F128J3 & FLASH_TYPEMASK);
+ flash_info[i].size = FLASH_BANK_SIZE;
+ flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+ memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+ switch (i) {
+ case 0:
+ flashbase = PHYS_FLASH_1;
+ break;
+ case 1:
+ flashbase = PHYS_FLASH_2;
+ break;
+ default:
+ panic ("configured too many flash banks!\n");
+ break;
+ }
+ for (j = 0; j < flash_info[i].sector_count; j++) {
+ flash_info[i].start[j] =
+ flashbase + j * MAIN_SECT_SIZE;
+ }
+ size += flash_info[i].size;
+ }
+
+ /* Protect monitor and environment sectors
+ */
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE + monitor_flash_len - 1,
+ &flash_info[0]);
+
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+ return size;
}
/*-----------------------------------------------------------------------
*/
-void flash_print_info (flash_info_t *info)
+void flash_print_info (flash_info_t * info)
{
- int i, j;
-
- for (j=0; j<CFG_MAX_FLASH_BANKS; j++)
- {
- switch (info->flash_id & FLASH_VENDMASK)
- {
- case (INTEL_MANUFACT & FLASH_VENDMASK):
- printf("Intel: ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK)
- {
- case (INTEL_ID_28F320J3A & FLASH_TYPEMASK):
- printf("28F320J3A (32Mbit)\n");
- break;
- case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
- printf("28F128J3 (128Mbit)\n");
- break;
- default:
- printf("Unknown Chip Type\n");
- goto Done;
- break;
- }
-
- printf(" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf(" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++)
- {
- if ((i % 5) == 0)
- {
- printf ("\n ");
- }
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
- info++;
- }
-
-Done:
+ int i, j;
+
+ for (j = 0; j < CFG_MAX_FLASH_BANKS; j++) {
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case (INTEL_MANUFACT & FLASH_VENDMASK):
+ printf ("Intel: ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case (INTEL_ID_28F320J3A & FLASH_TYPEMASK):
+ printf ("28F320J3A (32Mbit)\n");
+ break;
+ case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
+ printf ("28F128J3 (128Mbit)\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ goto Done;
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; i++) {
+ if ((i % 5) == 0) {
+ printf ("\n ");
+ }
+ printf (" %08lX%s", info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+ info++;
+ }
+
+Done: ;
}
/*-----------------------------------------------------------------------
*/
-int flash_erase (flash_info_t *info, int s_first, int s_last)
+int flash_erase (flash_info_t * info, int s_first, int s_last)
{
- int flag, prot, sect;
- int rc = ERR_OK;
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (INTEL_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot)
- return ERR_PROTECTED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
-
- printf("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked();
-
- if (info->protect[sect] == 0) { /* not protected */
- vu_short *addr = (vu_short *)(info->start[sect]);
-
- *addr = 0x20; /* erase setup */
- *addr = 0xD0; /* erase confirm */
-
- while ((*addr & 0x80) != 0x80) {
- if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
- *addr = 0xB0; /* suspend erase */
- *addr = 0xFF; /* reset to read mode */
- rc = ERR_TIMOUT;
- goto outahere;
- }
- }
-
- /* clear status register command */
- *addr = 0x50;
- /* reset to read mode */
- *addr = 0xFF;
- }
- printf("ok.\n");
- }
- if (ctrlc())
- printf("User Interrupt!\n");
+ int flag, prot, sect;
+ int rc = ERR_OK;
+
+ if (info->flash_id == FLASH_UNKNOWN)
+ return ERR_UNKNOWN_FLASH_TYPE;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ return ERR_INVAL;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) !=
+ (INTEL_MANUFACT & FLASH_VENDMASK)) {
+ return ERR_UNKNOWN_FLASH_VENDOR;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+ if (prot)
+ return ERR_PROTECTED;
+
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+ flag = disable_interrupts ();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
+
+ printf ("Erasing sector %2d ... ", sect);
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+
+ if (info->protect[sect] == 0) { /* not protected */
+ vu_short *addr = (vu_short *) (info->start[sect]);
+
+ *addr = 0x20; /* erase setup */
+ *addr = 0xD0; /* erase confirm */
+
+ while ((*addr & 0x80) != 0x80) {
+ if (get_timer_masked () >
+ CFG_FLASH_ERASE_TOUT) {
+ *addr = 0xB0; /* suspend erase */
+ *addr = 0xFF; /* reset to read mode */
+ rc = ERR_TIMOUT;
+ goto outahere;
+ }
+ }
+
+ /* clear status register command */
+ *addr = 0x50;
+ /* reset to read mode */
+ *addr = 0xFF;
+ }
+ printf ("ok.\n");
+ }
+ if (ctrlc ())
+ printf ("User Interrupt!\n");
outahere:
- /* allow flash to settle - wait 10 ms */
- udelay_masked(10000);
+ /* allow flash to settle - wait 10 ms */
+ udelay_masked (10000);
- if (flag)
- enable_interrupts();
+ if (flag)
+ enable_interrupts ();
- return rc;
+ return rc;
}
/*-----------------------------------------------------------------------
* Copy memory to flash
*/
-static int write_word (flash_info_t *info, ulong dest, ushort data)
+static int write_word (flash_info_t * info, ulong dest, ushort data)
{
- vu_short *addr = (vu_short *)dest, val;
- int rc = ERR_OK;
- int flag;
-
- /* Check if Flash is (sufficiently) erased
- */
- if ((*addr & data) != data)
- return ERR_NOT_ERASED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts();
-
- /* clear status register command */
- *addr = 0x50;
-
- /* program set-up command */
- *addr = 0x40;
-
- /* latch address/data */
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked();
-
- /* wait while polling the status register */
- while(((val = *addr) & 0x80) != 0x80)
- {
- if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
- rc = ERR_TIMOUT;
- /* suspend program command */
- *addr = 0xB0;
- goto outahere;
- }
- }
-
- if(val & 0x1A) { /* check for error */
- printf("\nFlash write error %02x at address %08lx\n",
- (int)val, (unsigned long)dest);
- if(val & (1<<3)) {
- printf("Voltage range error.\n");
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- if(val & (1<<1)) {
- printf("Device protect error.\n");
- rc = ERR_PROTECTED;
- goto outahere;
- }
- if(val & (1<<4)) {
- printf("Programming error.\n");
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
+ vu_short *addr = (vu_short *) dest, val;
+ int rc = ERR_OK;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased
+ */
+ if ((*addr & data) != data)
+ return ERR_NOT_ERASED;
+
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+ flag = disable_interrupts ();
+
+ /* clear status register command */
+ *addr = 0x50;
+
+ /* program set-up command */
+ *addr = 0x40;
+
+ /* latch address/data */
+ *addr = data;
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+
+ /* wait while polling the status register */
+ while (((val = *addr) & 0x80) != 0x80) {
+ if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+ rc = ERR_TIMOUT;
+ /* suspend program command */
+ *addr = 0xB0;
+ goto outahere;
+ }
+ }
+
+ if (val & 0x1A) { /* check for error */
+ printf ("\nFlash write error %02x at address %08lx\n",
+ (int) val, (unsigned long) dest);
+ if (val & (1 << 3)) {
+ printf ("Voltage range error.\n");
+ rc = ERR_PROG_ERROR;
+ goto outahere;
+ }
+ if (val & (1 << 1)) {
+ printf ("Device protect error.\n");
+ rc = ERR_PROTECTED;
+ goto outahere;
+ }
+ if (val & (1 << 4)) {
+ printf ("Programming error.\n");
+ rc = ERR_PROG_ERROR;
+ goto outahere;
+ }
+ rc = ERR_PROG_ERROR;
+ goto outahere;
+ }
outahere:
- /* read array command */
- *addr = 0xFF;
+ /* read array command */
+ *addr = 0xFF;
- if (flag)
- enable_interrupts();
+ if (flag)
+ enable_interrupts ();
- return rc;
+ return rc;
}
/*-----------------------------------------------------------------------
* Copy memory to flash.
*/
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
- ulong cp, wp;
- ushort data;
- int l;
- int i, rc;
-
- wp = (addr & ~1); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0)
- {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 8);
- }
- for (; i<2 && cnt>0; ++i) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 8);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 2;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 2) {
- data = *((vu_short*)src);
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- src += 2;
- wp += 2;
- cnt -= 2;
- }
-
- if (cnt == 0) {
- return ERR_OK;
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- }
- for (; i<2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 8);
- }
-
- return write_word(info, wp, data);
+ ulong cp, wp;
+ ushort data;
+ int l;
+ int i, rc;
+
+ wp = (addr & ~1); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *) cp << 8);
+ }
+ for (; i < 2 && cnt > 0; ++i) {
+ data = (data >> 8) | (*src++ << 8);
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < 2; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *) cp << 8);
+ }
+
+ if ((rc = write_word (info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 2;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 2) {
+ data = *((vu_short *) src);
+ if ((rc = write_word (info, wp, data)) != 0) {
+ return (rc);
+ }
+ src += 2;
+ wp += 2;
+ cnt -= 2;
+ }
+
+ if (cnt == 0) {
+ return ERR_OK;
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
+ data = (data >> 8) | (*src++ << 8);
+ --cnt;
+ }
+ for (; i < 2; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *) cp << 8);
+ }
+
+ return write_word (info, wp, data);
}