arm: am57xx: cl-som-am57x: Use new pinctrl macros

Commit 6ae4c3efbd62 ("ARM: DRA7: Add pinctrl register definitions")
has added new macros for pinmux configuration in line with the
kernel definitions. Fixup the current pinctrl data for the CompuLab
CL-SOM-AM57x board to use these new macros to facilitate the removal
of the old macros.

NOTE:
The PEN and PDIS macro values used previously were actually defined
inversely, a value of 1 in bit position 16 actually means that the
internal pullup/pulldown is disabled and not enabled as inferred by
PEN. So, previous pinmux config data such as (PDIS | PTU) is confusing
as it actually was meant for enabling internal pullup. The data is
fixed up only to be equivalent to the previous data.

Signed-off-by: Suman Anna <s-anna@ti.com>

1 files changed, 53 insertions, 52 deletions

diff --git a/board/compulab/cl-som-am57x/mux.c b/board/compulab/cl-som-am57x/mux.c
index 0db0609727..21449ca029 100644
--- a/board/compulab/cl-som-am57x/mux.c
+++ b/board/compulab/cl-som-am57x/mux.c
@@ -12,97 +12,98 @@
 
 /* Serial console */
 static const struct pad_conf_entry cl_som_am57x_padconf_console[] = {
-	{UART3_RXD, (FSC | IEN | PDIS | PTU | M0)}, /* UART3_RXD */
-	{UART3_TXD, (FSC | IEN | PDIS | PTU | M0)}, /* UART3_TXD */
+	{UART3_RXD, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* UART3_RXD */
+	{UART3_TXD, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* UART3_TXD */
 };
 
 /* PMIC I2C */
 static const struct pad_conf_entry cl_som_am57x_padconf_pmic[] = {
-	{MCASP1_ACLKR, (IEN | PEN | M10)}, /* MCASP1_ACLKR.I2C4_SDA */
-	{MCASP1_FSR,   (IEN | PEN | M10)}, /* MCASP1_FSR.I2C4_SCL */
+	{MCASP1_ACLKR, (M10 | PIN_INPUT)}, /* MCASP1_ACLKR.I2C4_SDA */
+	{MCASP1_FSR,   (M10 | PIN_INPUT)}, /* MCASP1_FSR.I2C4_SCL */
 };
 
 /* Green GPIO led */
 static const struct pad_conf_entry cl_som_am57x_padconf_green_led[] = {
-	{GPMC_A15, (IDIS | PDIS | PTD | M14)}, /* GPMC_A15.GPIO2_5 */
+	{GPMC_A15, (M14 | PIN_OUTPUT_PULLDOWN)}, /* GPMC_A15.GPIO2_5 */
 };
 
 /* MMC/SD Card */
 static const struct pad_conf_entry cl_som_am57x_padconf_sd_card[] = {
-	{MMC1_CLK,  (IEN | PDIS | PTU | M0) }, /* MMC1_CLK */
-	{MMC1_CMD,  (IEN | PDIS | PTU | M0) }, /* MMC1_CMD */
-	{MMC1_DAT0, (IEN | PDIS | PTU | M0) }, /* MMC1_DAT0 */
-	{MMC1_DAT1, (IEN | PDIS | PTU | M0) }, /* MMC1_DAT1 */
-	{MMC1_DAT2, (IEN | PDIS | PTU | M0) }, /* MMC1_DAT2 */
-	{MMC1_DAT3, (IEN | PDIS | PTU | M0) }, /* MMC1_DAT3 */
-	{MMC1_SDCD, (IEN | PEN  |	M14)}, /* MMC1_SDCD */
-	{MMC1_SDWP, (IEN | PEN  |	M14)}, /* MMC1_SDWP */
+	{MMC1_CLK,  (M0  | PIN_INPUT_PULLUP)}, /* MMC1_CLK */
+	{MMC1_CMD,  (M0  | PIN_INPUT_PULLUP)}, /* MMC1_CMD */
+	{MMC1_DAT0, (M0  | PIN_INPUT_PULLUP)}, /* MMC1_DAT0 */
+	{MMC1_DAT1, (M0  | PIN_INPUT_PULLUP)}, /* MMC1_DAT1 */
+	{MMC1_DAT2, (M0  | PIN_INPUT_PULLUP)}, /* MMC1_DAT2 */
+	{MMC1_DAT3, (M0  | PIN_INPUT_PULLUP)}, /* MMC1_DAT3 */
+	{MMC1_SDCD, (M14 | PIN_INPUT)       }, /* MMC1_SDCD */
+	{MMC1_SDWP, (M14 | PIN_INPUT)       }, /* MMC1_SDWP */
 };
 
 /* WiFi - must be in the safe mode on boot */
 static const struct pad_conf_entry cl_som_am57x_padconf_wifi[] = {
-	{UART1_CTSN, (IEN | M15)}, /* UART1_CTSN */
-	{UART1_RTSN, (IEN | M15)}, /* UART1_RTSN */
-	{UART2_RXD,  (IEN | M15)}, /* UART2_RXD */
-	{UART2_TXD,  (IEN | M15)}, /* UART2_TXD */
-	{UART2_CTSN, (IEN | M15)}, /* UART2_CTSN */
-	{UART2_RTSN, (IEN | M15)}, /* UART2_RTSN */
+	{UART1_CTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART1_CTSN */
+	{UART1_RTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART1_RTSN */
+	{UART2_RXD,  (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_RXD */
+	{UART2_TXD,  (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_TXD */
+	{UART2_CTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_CTSN */
+	{UART2_RTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_RTSN */
 };
 
 /* QSPI */
 static const struct pad_conf_entry cl_som_am57x_padconf_qspi[] = {
-	{GPMC_A13, (IEN | PEN  |       M1)}, /* GPMC_A13.QSPI1_RTCLK */
-	{GPMC_A18, (IEN | PEN  |       M1)}, /* GPMC_A18.QSPI1_SCLK */
-	{GPMC_A16, (IEN | PEN  |       M1)}, /* GPMC_A16.QSPI1_D0 */
-	{GPMC_A17, (IEN | PEN  |       M1)}, /* GPMC_A17.QSPI1_D1 */
-	{GPMC_CS2, (IEN | PDIS | PTU | M1)}, /* GPMC_CS2.QSPI1_CS0 */
+	{GPMC_A13, (M1 | PIN_INPUT)       }, /* GPMC_A13.QSPI1_RTCLK */
+	{GPMC_A18, (M1 | PIN_INPUT)       }, /* GPMC_A18.QSPI1_SCLK */
+	{GPMC_A16, (M1 | PIN_INPUT)       }, /* GPMC_A16.QSPI1_D0 */
+	{GPMC_A17, (M1 | PIN_INPUT)       }, /* GPMC_A17.QSPI1_D1 */
+	{GPMC_CS2, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_CS2.QSPI1_CS0 */
 };
 
 /* GPIO Expander I2C */
 static const struct pad_conf_entry cl_som_am57x_padconf_i2c_gpio[] = {
-	{MCASP1_AXR0, (IEN | PEN | M10)}, /* MCASP1_AXR0.I2C5_SDA */
-	{MCASP1_AXR1, (IEN | PEN | M10)}, /* MCASP1_AXR1.I2C5_SCL */
+	{MCASP1_AXR0, (M10 | PIN_INPUT)}, /* MCASP1_AXR0.I2C5_SDA */
+	{MCASP1_AXR1, (M10 | PIN_INPUT)}, /* MCASP1_AXR1.I2C5_SCL */
 };
 
 /* eMMC internal storage */
 static const struct pad_conf_entry cl_som_am57x_padconf_emmc[] = {
-	{GPMC_A19, (IEN | PDIS | PTU | M1)}, /* GPMC_A19.MMC2_DAT4 */
-	{GPMC_A20, (IEN | PDIS | PTU | M1)}, /* GPMC_A20.MMC2_DAT5 */
-	{GPMC_A21, (IEN | PDIS | PTU | M1)}, /* GPMC_A21.MMC2_DAT6 */
-	{GPMC_A22, (IEN | PDIS | PTU | M1)}, /* GPMC_A22.MMC2_DAT7 */
-	{GPMC_A23, (IEN | PDIS | PTU | M1)}, /* GPMC_A23.MMC2_CLK */
-	{GPMC_A24, (IEN | PDIS | PTU | M1)}, /* GPMC_A24.MMC2_DAT0 */
-	{GPMC_A25, (IEN | PDIS | PTU | M1)}, /* GPMC_A25.MMC2_DAT1 */
-	{GPMC_A26, (IEN | PDIS | PTU | M1)}, /* GPMC_A26.MMC2_DAT2 */
-	{GPMC_A27, (IEN | PDIS | PTU | M1)}, /* GPMC_A27.MMC2_DAT3 */
-	{GPMC_CS1, (IEN | PDIS | PTU | M1)}, /* GPMC_CS1.MMC2_CMD */
+	{GPMC_A19, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A19.MMC2_DAT4 */
+	{GPMC_A20, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A20.MMC2_DAT5 */
+	{GPMC_A21, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A21.MMC2_DAT6 */
+	{GPMC_A22, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A22.MMC2_DAT7 */
+	{GPMC_A23, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A23.MMC2_CLK */
+	{GPMC_A24, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A24.MMC2_DAT0 */
+	{GPMC_A25, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A25.MMC2_DAT1 */
+	{GPMC_A26, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A26.MMC2_DAT2 */
+	{GPMC_A27, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A27.MMC2_DAT3 */
+	{GPMC_CS1, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_CS1.MMC2_CMD */
 };
 
 /* usb1_drvvbus */
 static const struct pad_conf_entry cl_som_am57x_padconf_usb[] = {
-	{USB1_DRVVBUS, (M0 | FSC) }, /* USB1_DRVVBUS.USB1_DRVVBUS */
+	/* USB1_DRVVBUS.USB1_DRVVBUS */
+	{USB1_DRVVBUS, (M0 | PIN_OUTPUT_PULLDOWN | SLEWCONTROL) },
 };
 
 /* Ethernet */
 static const struct pad_conf_entry cl_som_am57x_padconf_ethernet[] = {
 	/* MDIO bus */
-	{VIN2A_D10,  (PDIS | PTU  |	  M3) }, /* VIN2A_D10.MDIO_MCLK  */
-	{VIN2A_D11,  (IEN  | PDIS | PTU | M3) }, /* VIN2A_D11.MDIO_D  */
+	{VIN2A_D10,  (M3  | PIN_OUTPUT_PULLUP) }, /* VIN2A_D10.MDIO_MCLK  */
+	{VIN2A_D11,  (M3  | PIN_INPUT_PULLUP)  }, /* VIN2A_D11.MDIO_D  */
 	/* EMAC Slave 1 at addr 0x1 - Default interface */
-	{VIN2A_D12,  (IDIS | PEN  |	  M3) }, /* VIN2A_D12.RGMII1_TXC */
-	{VIN2A_D13,  (IDIS | PEN  |	  M3) }, /* VIN2A_D13.RGMII1_TXCTL */
-	{VIN2A_D14,  (IDIS | PEN  |	  M3) }, /* VIN2A_D14.RGMII1_TXD3 */
-	{VIN2A_D15,  (IDIS | PEN  |	  M3) }, /* VIN2A_D15.RGMII1_TXD2 */
-	{VIN2A_D16,  (IDIS | PEN  |	  M3) }, /* VIN2A_D16.RGMII1_TXD1 */
-	{VIN2A_D17,  (IDIS | PEN  |	  M3) }, /* VIN2A_D17.RGMII1_TXD0 */
-	{VIN2A_D18,  (IEN  | PDIS | PTD | M3) }, /* VIN2A_D18.RGMII1_RXC */
-	{VIN2A_D19,  (IEN  | PDIS | PTD | M3) }, /* VIN2A_D19.RGMII1_RXCTL */
-	{VIN2A_D20,  (IEN  | PDIS | PTD | M3) }, /* VIN2A_D20.RGMII1_RXD3 */
-	{VIN2A_D21,  (IEN  | PDIS | PTD | M3) }, /* VIN2A_D21.RGMII1_RXD2 */
-	{VIN2A_D22,  (IEN  | PDIS | PTD | M3) }, /* VIN2A_D22.RGMII1_RXD1 */
-	{VIN2A_D23,  (IEN  | PDIS | PTD | M3) }, /* VIN2A_D23.RGMII1_RXD0 */
+	{VIN2A_D12,  (M3  | PIN_OUTPUT)         }, /* VIN2A_D12.RGMII1_TXC */
+	{VIN2A_D13,  (M3  | PIN_OUTPUT)         }, /* VIN2A_D13.RGMII1_TXCTL */
+	{VIN2A_D14,  (M3  | PIN_OUTPUT)         }, /* VIN2A_D14.RGMII1_TXD3 */
+	{VIN2A_D15,  (M3  | PIN_OUTPUT)         }, /* VIN2A_D15.RGMII1_TXD2 */
+	{VIN2A_D16,  (M3  | PIN_OUTPUT)         }, /* VIN2A_D16.RGMII1_TXD1 */
+	{VIN2A_D17,  (M3  | PIN_OUTPUT)         }, /* VIN2A_D17.RGMII1_TXD0 */
+	{VIN2A_D18,  (M3  | PIN_INPUT_PULLDOWN) }, /* VIN2A_D18.RGMII1_RXC */
+	{VIN2A_D19,  (M3  | PIN_INPUT_PULLDOWN) }, /* VIN2A_D19.RGMII1_RXCTL */
+	{VIN2A_D20,  (M3  | PIN_INPUT_PULLDOWN) }, /* VIN2A_D20.RGMII1_RXD3 */
+	{VIN2A_D21,  (M3  | PIN_INPUT_PULLDOWN) }, /* VIN2A_D21.RGMII1_RXD2 */
+	{VIN2A_D22,  (M3  | PIN_INPUT_PULLDOWN) }, /* VIN2A_D22.RGMII1_RXD1 */
+	{VIN2A_D23,  (M3  | PIN_INPUT_PULLDOWN) }, /* VIN2A_D23.RGMII1_RXD0 */
 	/* Eth PHY1 reset GPIOs*/
-	{VIN2A_CLK0, (IDIS | PDIS | PTD | M14)}, /* VIN2A_CLK0.GPIO3_28 */
+	{VIN2A_CLK0, (M14 | PIN_OUTPUT_PULLDOWN)}, /* VIN2A_CLK0.GPIO3_28 */
 };
 
 #define SET_MUX(mux_array) do_set_mux32((*ctrl)->control_padconf_core_base, \