diff options
| author | Haavard Skinnemoen <haavard.skinnemoen@atmel.com> | 2008-12-17 16:53:07 +0100 |
|---|---|---|
| committer | Haavard Skinnemoen <haavard.skinnemoen@atmel.com> | 2008-12-17 16:53:07 +0100 |
| commit | cb5473205206c7f14cbb1e747f28ec75b48826e2 (patch) | |
| tree | 8f4808d60917100b18a10b05230f7638a0a9bbcc /board/cogent/README | |
| parent | baf449fc5ff96f071bb0e3789fd3265f6d4fd9a0 (diff) | |
| parent | 92c78a3bbcb2ce508b4bf1c4a1e0940406a024bb (diff) | |
Merge branch 'fixes' into cleanups
Conflicts:
board/atmel/atngw100/atngw100.c
board/atmel/atstk1000/atstk1000.c
cpu/at32ap/at32ap700x/gpio.c
include/asm-avr32/arch-at32ap700x/clk.h
include/configs/atngw100.h
include/configs/atstk1002.h
include/configs/atstk1003.h
include/configs/atstk1004.h
include/configs/atstk1006.h
include/configs/favr-32-ezkit.h
include/configs/hammerhead.h
include/configs/mimc200.h
Diffstat (limited to 'board/cogent/README')
| -rw-r--r-- | board/cogent/README | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/board/cogent/README b/board/cogent/README index e6eef662c9b..31ca187b59b 100644 --- a/board/cogent/README +++ b/board/cogent/README @@ -80,16 +80,16 @@ To configure, perform the usual U-Boot configuration task of editing "include/config_cogent_mpc8xx.h" and reviewing all the options and settings in there. In particular, check the chip select values installed into the memory controller's various option and base -registers - these are set by the defines CFG_CMA_CSn_{BASE,SIZE} and -CFG_{B,O}Rn_PRELIM. Also be careful of the clock settings installed -into the SCCR - via the define CFG_SCCR. Finally, decide whether you +registers - these are set by the defines CONFIG_SYS_CMA_CSn_{BASE,SIZE} and +CONFIG_SYS_{B,O}Rn_PRELIM. Also be careful of the clock settings installed +into the SCCR - via the define CONFIG_SYS_SCCR. Finally, decide whether you want the serial console on motherboard serial port A or on one of the 8xx SMC ports, and set CONFIG_8xx_CONS_{SMC1,SMC2,NONE} accordingly (NONE means use Cogent motherboard serial port A). Then edit the file "cogent/config.mk". Firstly, set TEXT_BASE to be the base address of the EPROM for the CPU module. This should be the -same as the value selected for CFG_MONITOR_BASE in +same as the value selected for CONFIG_SYS_MONITOR_BASE in "include/config_cogent_*.h" (in fact, I have made this automatic via the -DTEXT_BASE=... option in CPPFLAGS). |