cm-t35: move cm-t35 to live in compulab directory

Currently the cm-t35 support code lives under board/cm_t35 directory.
Some of the code can be shared with other/future CompuLab boards,
so move the cm-t35 to live under board/compulab/cm_t35 directory.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Tested-by: Nikita Kiryanov <nikita@compulab.co.il>

6 files changed, 0 insertions, 1294 deletions

diff --git a/board/cm_t35/Makefile b/board/cm_t35/Makefile
deleted file mode 100644
index bde56e61f4..0000000000
--- a/board/cm_t35/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += eeprom.o
-COBJS-$(CONFIG_LCD) += display.o
-
-COBJS	:= cm_t35.o leds.o $(COBJS-y)
-
-SRCS	:= $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c
deleted file mode 100644
index 85286809d3..0000000000
--- a/board/cm_t35/cm_t35.c
+++ /dev/null
@@ -1,617 +0,0 @@
-/*
- * (C) Copyright 2011 CompuLab, Ltd. <www.compulab.co.il>
- *
- * Authors: Mike Rapoport <mike@compulab.co.il>
- *	    Igor Grinberg <grinberg@compulab.co.il>
- *
- * Derived from omap3evm and Beagle Board by
- *	Manikandan Pillai <mani.pillai@ti.com>
- *	Richard Woodruff <r-woodruff2@ti.com>
- *	Syed Mohammed Khasim <x0khasim@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#include <common.h>
-#include <status_led.h>
-#include <netdev.h>
-#include <net.h>
-#include <i2c.h>
-#include <usb.h>
-#include <mmc.h>
-#include <nand.h>
-#include <twl4030.h>
-#include <bmp_layout.h>
-#include <linux/compiler.h>
-
-#include <asm/io.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/mach-types.h>
-#include <asm/ehci-omap.h>
-#include <asm/gpio.h>
-
-#include "eeprom.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-const omap3_sysinfo sysinfo = {
-	DDR_DISCRETE,
-	"CM-T3x board",
-	"NAND",
-};
-
-static u32 gpmc_net_config[GPMC_MAX_REG] = {
-	NET_GPMC_CONFIG1,
-	NET_GPMC_CONFIG2,
-	NET_GPMC_CONFIG3,
-	NET_GPMC_CONFIG4,
-	NET_GPMC_CONFIG5,
-	NET_GPMC_CONFIG6,
-	0
-};
-
-static u32 gpmc_nand_config[GPMC_MAX_REG] = {
-	SMNAND_GPMC_CONFIG1,
-	SMNAND_GPMC_CONFIG2,
-	SMNAND_GPMC_CONFIG3,
-	SMNAND_GPMC_CONFIG4,
-	SMNAND_GPMC_CONFIG5,
-	SMNAND_GPMC_CONFIG6,
-	0,
-};
-
-#ifdef CONFIG_LCD
-#ifdef CONFIG_CMD_NAND
-static int splash_load_from_nand(u32 bmp_load_addr)
-{
-	struct bmp_header *bmp_hdr;
-	int res, splash_screen_nand_offset = 0x100000;
-	size_t bmp_size, bmp_header_size = sizeof(struct bmp_header);
-
-	if (bmp_load_addr + bmp_header_size >= gd->start_addr_sp)
-		goto splash_address_too_high;
-
-	res = nand_read_skip_bad(&nand_info[nand_curr_device],
-			splash_screen_nand_offset, &bmp_header_size,
-			NULL, nand_info[nand_curr_device].size,
-			(u_char *)bmp_load_addr);
-	if (res < 0)
-		return res;
-
-	bmp_hdr = (struct bmp_header *)bmp_load_addr;
-	bmp_size = le32_to_cpu(bmp_hdr->file_size);
-
-	if (bmp_load_addr + bmp_size >= gd->start_addr_sp)
-		goto splash_address_too_high;
-
-	return nand_read_skip_bad(&nand_info[nand_curr_device],
-			splash_screen_nand_offset, &bmp_size,
-			NULL, nand_info[nand_curr_device].size,
-			(u_char *)bmp_load_addr);
-
-splash_address_too_high:
-	printf("Error: splashimage address too high. Data overwrites U-Boot "
-		"and/or placed beyond DRAM boundaries.\n");
-
-	return -1;
-}
-#else
-static inline int splash_load_from_nand(void)
-{
-	return -1;
-}
-#endif /* CONFIG_CMD_NAND */
-
-int board_splash_screen_prepare(void)
-{
-	char *env_splashimage_value;
-	u32 bmp_load_addr;
-
-	env_splashimage_value = getenv("splashimage");
-	if (env_splashimage_value == NULL)
-		return -1;
-
-	bmp_load_addr = simple_strtoul(env_splashimage_value, 0, 16);
-	if (bmp_load_addr == 0) {
-		printf("Error: bad splashimage address specified\n");
-		return -1;
-	}
-
-	return splash_load_from_nand(bmp_load_addr);
-}
-#endif /* CONFIG_LCD */
-
-/*
- * Routine: board_init
- * Description: hardware init.
- */
-int board_init(void)
-{
-	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
-
-	enable_gpmc_cs_config(gpmc_nand_config, &gpmc_cfg->cs[0],
-			      CONFIG_SYS_NAND_BASE, GPMC_SIZE_16M);
-
-	/* board id for Linux */
-	if (get_cpu_family() == CPU_OMAP34XX)
-		gd->bd->bi_arch_number = MACH_TYPE_CM_T35;
-	else
-		gd->bd->bi_arch_number = MACH_TYPE_CM_T3730;
-
-	/* boot param addr */
-	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
-#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
-	status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
-#endif
-
-	return 0;
-}
-
-static u32 cm_t3x_rev;
-
-/*
- * Routine: get_board_rev
- * Description: read system revision
- */
-u32 get_board_rev(void)
-{
-	if (!cm_t3x_rev)
-		cm_t3x_rev = cm_t3x_eeprom_get_board_rev();
-
-	return cm_t3x_rev;
-};
-
-/*
- * Routine: misc_init_r
- * Description: display die ID
- */
-int misc_init_r(void)
-{
-	u32 board_rev = get_board_rev();
-	u32 rev_major = board_rev / 100;
-	u32 rev_minor = board_rev - (rev_major * 100);
-
-	if ((rev_minor / 10) * 10 == rev_minor)
-		rev_minor = rev_minor / 10;
-
-	printf("PCB:   %u.%u\n", rev_major, rev_minor);
-	dieid_num_r();
-
-	return 0;
-}
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- *		hardware. Many pins need to be moved from protect to primary
- *		mode.
- */
-static void cm_t3x_set_common_muxconf(void)
-{
-	/* SDRC */
-	MUX_VAL(CP(SDRC_D0),		(IEN  | PTD | DIS | M0)); /*SDRC_D0*/
-	MUX_VAL(CP(SDRC_D1),		(IEN  | PTD | DIS | M0)); /*SDRC_D1*/
-	MUX_VAL(CP(SDRC_D2),		(IEN  | PTD | DIS | M0)); /*SDRC_D2*/
-	MUX_VAL(CP(SDRC_D3),		(IEN  | PTD | DIS | M0)); /*SDRC_D3*/
-	MUX_VAL(CP(SDRC_D4),		(IEN  | PTD | DIS | M0)); /*SDRC_D4*/
-	MUX_VAL(CP(SDRC_D5),		(IEN  | PTD | DIS | M0)); /*SDRC_D5*/
-	MUX_VAL(CP(SDRC_D6),		(IEN  | PTD | DIS | M0)); /*SDRC_D6*/
-	MUX_VAL(CP(SDRC_D7),		(IEN  | PTD | DIS | M0)); /*SDRC_D7*/
-	MUX_VAL(CP(SDRC_D8),		(IEN  | PTD | DIS | M0)); /*SDRC_D8*/
-	MUX_VAL(CP(SDRC_D9),		(IEN  | PTD | DIS | M0)); /*SDRC_D9*/
-	MUX_VAL(CP(SDRC_D10),		(IEN  | PTD | DIS | M0)); /*SDRC_D10*/
-	MUX_VAL(CP(SDRC_D11),		(IEN  | PTD | DIS | M0)); /*SDRC_D11*/
-	MUX_VAL(CP(SDRC_D12),		(IEN  | PTD | DIS | M0)); /*SDRC_D12*/
-	MUX_VAL(CP(SDRC_D13),		(IEN  | PTD | DIS | M0)); /*SDRC_D13*/
-	MUX_VAL(CP(SDRC_D14),		(IEN  | PTD | DIS | M0)); /*SDRC_D14*/
-	MUX_VAL(CP(SDRC_D15),		(IEN  | PTD | DIS | M0)); /*SDRC_D15*/
-	MUX_VAL(CP(SDRC_D16),		(IEN  | PTD | DIS | M0)); /*SDRC_D16*/
-	MUX_VAL(CP(SDRC_D17),		(IEN  | PTD | DIS | M0)); /*SDRC_D17*/
-	MUX_VAL(CP(SDRC_D18),		(IEN  | PTD | DIS | M0)); /*SDRC_D18*/
-	MUX_VAL(CP(SDRC_D19),		(IEN  | PTD | DIS | M0)); /*SDRC_D19*/
-	MUX_VAL(CP(SDRC_D20),		(IEN  | PTD | DIS | M0)); /*SDRC_D20*/
-	MUX_VAL(CP(SDRC_D21),		(IEN  | PTD | DIS | M0)); /*SDRC_D21*/
-	MUX_VAL(CP(SDRC_D22),		(IEN  | PTD | DIS | M0)); /*SDRC_D22*/
-	MUX_VAL(CP(SDRC_D23),		(IEN  | PTD | DIS | M0)); /*SDRC_D23*/
-	MUX_VAL(CP(SDRC_D24),		(IEN  | PTD | DIS | M0)); /*SDRC_D24*/
-	MUX_VAL(CP(SDRC_D25),		(IEN  | PTD | DIS | M0)); /*SDRC_D25*/
-	MUX_VAL(CP(SDRC_D26),		(IEN  | PTD | DIS | M0)); /*SDRC_D26*/
-	MUX_VAL(CP(SDRC_D27),		(IEN  | PTD | DIS | M0)); /*SDRC_D27*/
-	MUX_VAL(CP(SDRC_D28),		(IEN  | PTD | DIS | M0)); /*SDRC_D28*/
-	MUX_VAL(CP(SDRC_D29),		(IEN  | PTD | DIS | M0)); /*SDRC_D29*/
-	MUX_VAL(CP(SDRC_D30),		(IEN  | PTD | DIS | M0)); /*SDRC_D30*/
-	MUX_VAL(CP(SDRC_D31),		(IEN  | PTD | DIS | M0)); /*SDRC_D31*/
-	MUX_VAL(CP(SDRC_CLK),		(IEN  | PTD | DIS | M0)); /*SDRC_CLK*/
-	MUX_VAL(CP(SDRC_DQS0),		(IEN  | PTD | DIS | M0)); /*SDRC_DQS0*/
-	MUX_VAL(CP(SDRC_DQS1),		(IEN  | PTD | DIS | M0)); /*SDRC_DQS1*/
-	MUX_VAL(CP(SDRC_DQS2),		(IEN  | PTD | DIS | M0)); /*SDRC_DQS2*/
-	MUX_VAL(CP(SDRC_DQS3),		(IEN  | PTD | DIS | M0)); /*SDRC_DQS3*/
-	MUX_VAL(CP(SDRC_CKE0),		(IDIS | PTU | EN  | M0)); /*SDRC_CKE0*/
-	MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTD | DIS | M7)); /*SDRC_CKE1*/
-
-	/* GPMC */
-	MUX_VAL(CP(GPMC_A1),		(IDIS | PTU | EN  | M0)); /*GPMC_A1*/
-	MUX_VAL(CP(GPMC_A2),		(IDIS | PTU | EN  | M0)); /*GPMC_A2*/
-	MUX_VAL(CP(GPMC_A3),		(IDIS | PTU | EN  | M0)); /*GPMC_A3*/
-	MUX_VAL(CP(GPMC_A4),		(IDIS | PTU | EN  | M0)); /*GPMC_A4*/
-	MUX_VAL(CP(GPMC_A5),		(IDIS | PTU | EN  | M0)); /*GPMC_A5*/
-	MUX_VAL(CP(GPMC_A6),		(IDIS | PTU | EN  | M0)); /*GPMC_A6*/
-	MUX_VAL(CP(GPMC_A7),		(IDIS | PTU | EN  | M0)); /*GPMC_A7*/
-	MUX_VAL(CP(GPMC_A8),		(IDIS | PTU | EN  | M0)); /*GPMC_A8*/
-	MUX_VAL(CP(GPMC_A9),		(IDIS | PTU | EN  | M0)); /*GPMC_A9*/
-	MUX_VAL(CP(GPMC_A10),		(IDIS | PTU | EN  | M0)); /*GPMC_A10*/
-	MUX_VAL(CP(GPMC_D0),		(IEN  | PTU | EN  | M0)); /*GPMC_D0*/
-	MUX_VAL(CP(GPMC_D1),		(IEN  | PTU | EN  | M0)); /*GPMC_D1*/
-	MUX_VAL(CP(GPMC_D2),		(IEN  | PTU | EN  | M0)); /*GPMC_D2*/
-	MUX_VAL(CP(GPMC_D3),		(IEN  | PTU | EN  | M0)); /*GPMC_D3*/
-	MUX_VAL(CP(GPMC_D4),		(IEN  | PTU | EN  | M0)); /*GPMC_D4*/
-	MUX_VAL(CP(GPMC_D5),		(IEN  | PTU | EN  | M0)); /*GPMC_D5*/
-	MUX_VAL(CP(GPMC_D6),		(IEN  | PTU | EN  | M0)); /*GPMC_D6*/
-	MUX_VAL(CP(GPMC_D7),		(IEN  | PTU | EN  | M0)); /*GPMC_D7*/
-	MUX_VAL(CP(GPMC_D8),		(IEN  | PTU | EN  | M0)); /*GPMC_D8*/
-	MUX_VAL(CP(GPMC_D9),		(IEN  | PTU | EN  | M0)); /*GPMC_D9*/
-	MUX_VAL(CP(GPMC_D10),		(IEN  | PTU | EN  | M0)); /*GPMC_D10*/
-	MUX_VAL(CP(GPMC_D11),		(IEN  | PTU | EN  | M0)); /*GPMC_D11*/
-	MUX_VAL(CP(GPMC_D12),		(IEN  | PTU | EN  | M0)); /*GPMC_D12*/
-	MUX_VAL(CP(GPMC_D13),		(IEN  | PTU | EN  | M0)); /*GPMC_D13*/
-	MUX_VAL(CP(GPMC_D14),		(IEN  | PTU | EN  | M0)); /*GPMC_D14*/
-	MUX_VAL(CP(GPMC_D15),		(IEN  | PTU | EN  | M0)); /*GPMC_D15*/
-	MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)); /*GPMC_nCS0*/
-
-	/* SB-T35 Ethernet */
-	MUX_VAL(CP(GPMC_NCS4),		(IEN  | PTU | EN  | M0)); /*GPMC_nCS4*/
-
-	/* DVI enable */
-	MUX_VAL(CP(GPMC_NCS3),		(IDIS  | PTU | DIS  | M4));/*GPMC_nCS3*/
-
-	/* CM-T3x Ethernet */
-	MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTU | DIS | M0)); /*GPMC_nCS5*/
-	MUX_VAL(CP(GPMC_CLK),		(IEN  | PTD | DIS | M4)); /*GPIO_59*/
-	MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)); /*nADV_ALE*/
-	MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)); /*nOE*/
-	MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0)); /*nWE*/
-	MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTU | EN  | M0)); /*nBE0_CLE*/
-	MUX_VAL(CP(GPMC_NBE1),		(IDIS | PTD | DIS | M4)); /*GPIO_61*/
-	MUX_VAL(CP(GPMC_NWP),		(IEN  | PTD | DIS | M0)); /*nWP*/
-	MUX_VAL(CP(GPMC_WAIT0),		(IEN  | PTU | EN  | M0)); /*WAIT0*/
-
-	/* DSS */
-	MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)); /*DSS_PCLK*/
-	MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)); /*DSS_HSYNC*/
-	MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)); /*DSS_VSYNC*/
-	MUX_VAL(CP(DSS_ACBIAS),		(IDIS | PTD | DIS | M0)); /*DSS_ACBIAS*/
-	MUX_VAL(CP(DSS_DATA6),		(IDIS | PTD | DIS | M0)); /*DSS_DATA6*/
-	MUX_VAL(CP(DSS_DATA7),		(IDIS | PTD | DIS | M0)); /*DSS_DATA7*/
-	MUX_VAL(CP(DSS_DATA8),		(IDIS | PTD | DIS | M0)); /*DSS_DATA8*/
-	MUX_VAL(CP(DSS_DATA9),		(IDIS | PTD | DIS | M0)); /*DSS_DATA9*/
-	MUX_VAL(CP(DSS_DATA10),		(IDIS | PTD | DIS | M0)); /*DSS_DATA10*/
-	MUX_VAL(CP(DSS_DATA11),		(IDIS | PTD | DIS | M0)); /*DSS_DATA11*/
-	MUX_VAL(CP(DSS_DATA12),		(IDIS | PTD | DIS | M0)); /*DSS_DATA12*/
-	MUX_VAL(CP(DSS_DATA13),		(IDIS | PTD | DIS | M0)); /*DSS_DATA13*/
-	MUX_VAL(CP(DSS_DATA14),		(IDIS | PTD | DIS | M0)); /*DSS_DATA14*/
-	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0)); /*DSS_DATA15*/
-	MUX_VAL(CP(DSS_DATA16),		(IDIS | PTD | DIS | M0)); /*DSS_DATA16*/
-	MUX_VAL(CP(DSS_DATA17),		(IDIS | PTD | DIS | M0)); /*DSS_DATA17*/
-
-	/* serial interface */
-	MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | DIS | M0)); /*UART3_RX*/
-	MUX_VAL(CP(UART3_TX_IRTX),	(IDIS | PTD | DIS | M0)); /*UART3_TX*/
-
-	/* mUSB */
-	MUX_VAL(CP(HSUSB0_CLK),		(IEN  | PTD | DIS | M0)); /*HSUSB0_CLK*/
-	MUX_VAL(CP(HSUSB0_STP),		(IDIS | PTU | EN  | M0)); /*HSUSB0_STP*/
-	MUX_VAL(CP(HSUSB0_DIR),		(IEN  | PTD | DIS | M0)); /*HSUSB0_DIR*/
-	MUX_VAL(CP(HSUSB0_NXT),		(IEN  | PTD | DIS | M0)); /*HSUSB0_NXT*/
-	MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)); /*HSUSB0_DATA0*/
-	MUX_VAL(CP(HSUSB0_DATA1),	(IEN  | PTD | DIS | M0)); /*HSUSB0_DATA1*/
-	MUX_VAL(CP(HSUSB0_DATA2),	(IEN  | PTD | DIS | M0)); /*HSUSB0_DATA2*/
-	MUX_VAL(CP(HSUSB0_DATA3),	(IEN  | PTD | DIS | M0)); /*HSUSB0_DATA3*/
-	MUX_VAL(CP(HSUSB0_DATA4),	(IEN  | PTD | DIS | M0)); /*HSUSB0_DATA4*/
-	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0)); /*HSUSB0_DATA5*/
-	MUX_VAL(CP(HSUSB0_DATA6),	(IEN  | PTD | DIS | M0)); /*HSUSB0_DATA6*/
-	MUX_VAL(CP(HSUSB0_DATA7),	(IEN  | PTD | DIS | M0)); /*HSUSB0_DATA7*/
-
-	/* USB EHCI */
-	MUX_VAL(CP(ETK_D0_ES2),		(IEN  | PTD | EN  | M3)); /*HSUSB1_DT0*/
-	MUX_VAL(CP(ETK_D1_ES2),		(IEN  | PTD | EN  | M3)); /*HSUSB1_DT1*/
-	MUX_VAL(CP(ETK_D2_ES2),		(IEN  | PTD | EN  | M3)); /*HSUSB1_DT2*/
-	MUX_VAL(CP(ETK_D7_ES2),		(IEN  | PTD | EN  | M3)); /*HSUSB1_DT3*/
-	MUX_VAL(CP(ETK_D4_ES2),		(IEN  | PTD | EN  | M3)); /*HSUSB1_DT4*/
-	MUX_VAL(CP(ETK_D5_ES2),		(IEN  | PTD | EN  | M3)); /*HSUSB1_DT5*/
-	MUX_VAL(CP(ETK_D6_ES2),		(IEN  | PTD | EN  | M3)); /*HSUSB1_DT6*/
-	MUX_VAL(CP(ETK_D3_ES2),		(IEN  | PTD | EN  | M3)); /*HSUSB1_DT7*/
-	MUX_VAL(CP(ETK_D8_ES2),		(IEN  | PTD | EN  | M3)); /*HSUSB1_DIR*/
-	MUX_VAL(CP(ETK_D9_ES2),		(IEN  | PTD | EN  | M3)); /*HSUSB1_NXT*/
-	MUX_VAL(CP(ETK_CTL_ES2),	(IDIS | PTD | DIS | M3)); /*HSUSB1_CLK*/
-	MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTU | DIS | M3)); /*HSUSB1_STP*/
-
-	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTD | EN  | M3)); /*HSUSB2_DT0*/
-	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTD | EN  | M3)); /*HSUSB2_DT1*/
-	MUX_VAL(CP(MCSPI1_CS3),		(IEN  | PTD | EN  | M3)); /*HSUSB2_DT2*/
-	MUX_VAL(CP(MCSPI2_CS1),		(IEN  | PTD | EN  | M3)); /*HSUSB2_DT3*/
-	MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTD | EN  | M3)); /*HSUSB2_DT4*/
-	MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTD | EN  | M3)); /*HSUSB2_DT5*/
-	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTD | EN  | M3)); /*HSUSB2_DT6*/
-	MUX_VAL(CP(MCSPI2_CLK),		(IEN  | PTD | EN  | M3)); /*HSUSB2_DT7*/
-	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | EN  | M3)); /*HSUSB2_DIR*/
-	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTD | EN  | M3)); /*HSUSB2_NXT*/
-	MUX_VAL(CP(ETK_D10_ES2),	(IDIS | PTD | DIS | M3)); /*HSUSB2_CLK*/
-	MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTU | DIS | M3)); /*HSUSB2_STP*/
-
-	/* SB_T35_USB_HUB_RESET_GPIO */
-	MUX_VAL(CP(CAM_WEN),		(IDIS | PTD | DIS | M4)); /*GPIO_167*/
-
-	/* I2C1 */
-	MUX_VAL(CP(I2C1_SCL),		(IEN  | PTU | EN  | M0)); /*I2C1_SCL*/
-	MUX_VAL(CP(I2C1_SDA),		(IEN  | PTU | EN  | M0)); /*I2C1_SDA*/
-	/* I2C2 */
-	MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M0)); /*I2C2_SCL*/
-	MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M0)); /*I2C2_SDA*/
-	/* I2C3 */
-	MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0)); /*I2C3_SCL*/
-	MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0)); /*I2C3_SDA*/
-
-	/* control and debug */
-	MUX_VAL(CP(SYS_32K),		(IEN  | PTD | DIS | M0)); /*SYS_32K*/
-	MUX_VAL(CP(SYS_CLKREQ),		(IEN  | PTD | DIS | M0)); /*SYS_CLKREQ*/
-	MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTU | EN  | M0)); /*SYS_nIRQ*/
-	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)); /*OFF_MODE*/
-	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)); /*CLKOUT1*/
-	MUX_VAL(CP(SYS_CLKOUT2),	(IDIS | PTU | DIS | M4)); /*green LED*/
-	MUX_VAL(CP(JTAG_nTRST),		(IEN  | PTD | DIS | M0)); /*JTAG_nTRST*/
-	MUX_VAL(CP(JTAG_TCK),		(IEN  | PTD | DIS | M0)); /*JTAG_TCK*/
-	MUX_VAL(CP(JTAG_TMS),		(IEN  | PTD | DIS | M0)); /*JTAG_TMS*/
-	MUX_VAL(CP(JTAG_TDI),		(IEN  | PTD | DIS | M0)); /*JTAG_TDI*/
-
-	/* MMC1 */
-	MUX_VAL(CP(MMC1_CLK),		(IDIS | PTU | EN  | M0)); /*MMC1_CLK*/
-	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | EN  | M0)); /*MMC1_CMD*/
-	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | EN  | M0)); /*MMC1_DAT0*/
-	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | EN  | M0)); /*MMC1_DAT1*/
-	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | EN  | M0)); /*MMC1_DAT2*/
-	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | EN  | M0)); /*MMC1_DAT3*/
-}
-
-static void cm_t35_set_muxconf(void)
-{
-	/* DSS */
-	MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M0)); /*DSS_DATA0*/
-	MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M0)); /*DSS_DATA1*/
-	MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M0)); /*DSS_DATA2*/
-	MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M0)); /*DSS_DATA3*/
-	MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M0)); /*DSS_DATA4*/
-	MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M0)); /*DSS_DATA5*/
-
-	MUX_VAL(CP(DSS_DATA18),         (IDIS | PTD | DIS | M0)); /*DSS_DATA18*/
-	MUX_VAL(CP(DSS_DATA19),         (IDIS | PTD | DIS | M0)); /*DSS_DATA19*/
-	MUX_VAL(CP(DSS_DATA20),         (IDIS | PTD | DIS | M0)); /*DSS_DATA20*/
-	MUX_VAL(CP(DSS_DATA21),         (IDIS | PTD | DIS | M0)); /*DSS_DATA21*/
-	MUX_VAL(CP(DSS_DATA22),         (IDIS | PTD | DIS | M0)); /*DSS_DATA22*/
-	MUX_VAL(CP(DSS_DATA23),         (IDIS | PTD | DIS | M0)); /*DSS_DATA23*/
-
-	/* MMC1 */
-	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M0)); /*MMC1_DAT4*/
-	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M0)); /*MMC1_DAT5*/
-	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M0)); /*MMC1_DAT6*/
-	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M0)); /*MMC1_DAT7*/
-}
-
-static void cm_t3730_set_muxconf(void)
-{
-	/* DSS */
-	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M3)); /*DSS_DATA0*/
-	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M3)); /*DSS_DATA1*/
-	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M3)); /*DSS_DATA2*/
-	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M3)); /*DSS_DATA3*/
-	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M3)); /*DSS_DATA4*/
-	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M3)); /*DSS_DATA5*/
-
-	MUX_VAL(CP(SYS_BOOT0),		(IDIS | PTD | DIS | M3)); /*DSS_DATA18*/
-	MUX_VAL(CP(SYS_BOOT1),		(IDIS | PTD | DIS | M3)); /*DSS_DATA19*/
-	MUX_VAL(CP(SYS_BOOT3),		(IDIS | PTD | DIS | M3)); /*DSS_DATA20*/
-	MUX_VAL(CP(SYS_BOOT4),		(IDIS | PTD | DIS | M3)); /*DSS_DATA21*/
-	MUX_VAL(CP(SYS_BOOT5),		(IDIS | PTD | DIS | M3)); /*DSS_DATA22*/
-	MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M3)); /*DSS_DATA23*/
-}
-
-void set_muxconf_regs(void)
-{
-	cm_t3x_set_common_muxconf();
-
-	if (get_cpu_family() == CPU_OMAP34XX)
-		cm_t35_set_muxconf();
-	else
-		cm_t3730_set_muxconf();
-}
-
-#ifdef CONFIG_GENERIC_MMC
-int board_mmc_getcd(struct mmc *mmc)
-{
-	u8 val;
-
-	if (twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO, &val))
-		return -1;
-
-	return !(val & 1);
-}
-
-int board_mmc_init(bd_t *bis)
-{
-	return omap_mmc_init(0, 0, 0, -1, 59);
-}
-#endif
-
-/*
- * Routine: setup_net_chip_gmpc
- * Description: Setting up the configuration GPMC registers specific to the
- *		Ethernet hardware.
- */
-static void setup_net_chip_gmpc(void)
-{
-	struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
-
-	enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[5],
-			      CM_T3X_SMC911X_BASE, GPMC_SIZE_16M);
-	enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[4],
-			      SB_T35_SMC911X_BASE, GPMC_SIZE_16M);
-
-	/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
-	writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
-
-	/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
-	writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
-
-	/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
-	writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
-		&ctrl_base->gpmc_nadv_ale);
-}
-
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
-/*
- * Routine: reset_net_chip
- * Description: reset the Ethernet controller via TPS65930 GPIO
- */
-static void reset_net_chip(void)
-{
-	/* Set GPIO1 of TPS65930 as output */
-	twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x03,
-			     0x02);
-	/* Send a pulse on the GPIO pin */
-	twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x0C,
-			     0x02);
-	udelay(1);
-	twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x09,
-			     0x02);
-	mdelay(40);
-	twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x0C,
-			     0x02);
-	mdelay(1);
-}
-#else
-static inline void reset_net_chip(void) {}
-#endif
-
-#ifdef CONFIG_SMC911X
-/*
- * Routine: handle_mac_address
- * Description: prepare MAC address for on-board Ethernet.
- */
-static int handle_mac_address(void)
-{
-	unsigned char enetaddr[6];
-	int rc;
-
-	rc = eth_getenv_enetaddr("ethaddr", enetaddr);
-	if (rc)
-		return 0;
-
-	rc = cm_t3x_eeprom_read_mac_addr(enetaddr);
-	if (rc)
-		return rc;
-
-	if (!is_valid_ether_addr(enetaddr))
-		return -1;
-
-	return eth_setenv_enetaddr("ethaddr", enetaddr);
-}
-
-
-/*
- * Routine: board_eth_init
- * Description: initialize module and base-board Ethernet chips
- */
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0, rc1 = 0;
-
-	setup_net_chip_gmpc();
-	reset_net_chip();
-
-	rc1 = handle_mac_address();
-	if (rc1)
-		printf("No MAC address found! ");
-
-	rc1 = smc911x_initialize(0, CM_T3X_SMC911X_BASE);
-	if (rc1 > 0)
-		rc++;
-
-	rc1 = smc911x_initialize(1, SB_T35_SMC911X_BASE);
-	if (rc1 > 0)
-		rc++;
-
-	return rc;
-}
-#endif
-
-void __weak get_board_serial(struct tag_serialnr *serialnr)
-{
-	/*
-	 * This corresponds to what happens when we can communicate with the
-	 * eeprom but don't get a valid board serial value.
-	 */
-	serialnr->low = 0;
-	serialnr->high = 0;
-};
-
-#ifdef CONFIG_USB_EHCI_OMAP
-struct omap_usbhs_board_data usbhs_bdata = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-};
-
-#define SB_T35_USB_HUB_RESET_GPIO	167
-int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
-	u8 val;
-	int offset;
-
-	if (gpio_request(SB_T35_USB_HUB_RESET_GPIO, "SB-T35 usb hub reset")) {
-		printf("Error: can't obtain GPIO %d for SB-T35 usb hub reset",
-				SB_T35_USB_HUB_RESET_GPIO);
-		return -1;
-	}
-
-	gpio_direction_output(SB_T35_USB_HUB_RESET_GPIO, 0);
-	udelay(10);
-	gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1);
-	udelay(1000);
-
-	offset = TWL4030_BASEADD_GPIO + TWL4030_GPIO_GPIODATADIR1;
-	twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, offset, &val);
-	/* Set GPIO6 and GPIO7 of TPS65930 as output */
-	val |= 0xC0;
-	twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, offset, val);
-	offset = TWL4030_BASEADD_GPIO + TWL4030_GPIO_SETGPIODATAOUT1;
-	/* Take both PHYs out of reset */
-	twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, offset, 0xC0);
-	udelay(1);
-
-	return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor);
-}
-
-int ehci_hcd_stop(void)
-{
-	return omap_ehci_hcd_stop();
-}
-
-#endif /* CONFIG_USB_EHCI_OMAP */
diff --git a/board/cm_t35/display.c b/board/cm_t35/display.c
deleted file mode 100644
index a004ea1d80..0000000000
--- a/board/cm_t35/display.c
+++ /dev/null
@@ -1,420 +0,0 @@
-/*
- * (C) Copyright 2012 CompuLab, Ltd. <www.compulab.co.il>
- *
- * Authors: Nikita Kiryanov <nikita@compulab.co.il>
- *
- * Parsing code based on linux/drivers/video/pxafb.c
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-#include <common.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <stdio_dev.h>
-#include <asm/arch/dss.h>
-#include <lcd.h>
-#include <asm/arch-omap3/dss.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-enum display_type {
-	NONE,
-	DVI,
-	DVI_CUSTOM,
-};
-
-#define CMAP_ADDR	0x80100000
-
-/*
- * The frame buffer is allocated before we have the chance to parse user input.
- * To make sure enough memory is allocated for all resolutions, we define
- * vl_{col | row} to the maximal resolution supported by OMAP3.
- */
-vidinfo_t panel_info = {
-	.vl_col  = 1400,
-	.vl_row  = 1050,
-	.vl_bpix = LCD_BPP,
-	.cmap = (ushort *)CMAP_ADDR,
-};
-
-static struct panel_config panel_cfg;
-static enum display_type lcd_def;
-
-/*
- * A note on DVI presets;
- * U-Boot can convert 8 bit BMP data to 16 bit BMP data, and OMAP DSS can
- * convert 16 bit data into 24 bit data. Thus, GFXFORMAT_RGB16 allows us to
- * support two BMP types with one setting.
- */
-static const struct panel_config preset_dvi_640X480 = {
-	.lcd_size	= PANEL_LCD_SIZE(640, 480),
-	.timing_h	= DSS_HBP(48) | DSS_HFP(16) | DSS_HSW(96),
-	.timing_v	= DSS_VBP(33) | DSS_VFP(10) | DSS_VSW(2),
-	.divisor	= 12 | (1 << 16),
-	.data_lines	= LCD_INTERFACE_24_BIT,
-	.panel_type	= ACTIVE_DISPLAY,
-	.load_mode	= 2,
-	.gfx_format	= GFXFORMAT_RGB16,
-};
-
-static const struct panel_config preset_dvi_800X600 = {
-	.lcd_size	= PANEL_LCD_SIZE(800, 600),
-	.timing_h	= DSS_HBP(88) | DSS_HFP(40) | DSS_HSW(128),
-	.timing_v	= DSS_VBP(23) | DSS_VFP(1) | DSS_VSW(4),
-	.divisor	= 8 | (1 << 16),
-	.data_lines	= LCD_INTERFACE_24_BIT,
-	.panel_type	= ACTIVE_DISPLAY,
-	.load_mode	= 2,
-	.gfx_format	= GFXFORMAT_RGB16,
-};
-
-static const struct panel_config preset_dvi_1024X768 = {
-	.lcd_size	= PANEL_LCD_SIZE(1024, 768),
-	.timing_h	= DSS_HBP(160) | DSS_HFP(24) | DSS_HSW(136),
-	.timing_v	= DSS_VBP(29) | DSS_VFP(3) | DSS_VSW(6),
-	.divisor	= 5 | (1 << 16),
-	.data_lines	= LCD_INTERFACE_24_BIT,
-	.panel_type	= ACTIVE_DISPLAY,
-	.load_mode	= 2,
-	.gfx_format	= GFXFORMAT_RGB16,
-};
-
-static const struct panel_config preset_dvi_1152X864 = {
-	.lcd_size	= PANEL_LCD_SIZE(1152, 864),
-	.timing_h	= DSS_HBP(256) | DSS_HFP(64) | DSS_HSW(128),
-	.timing_v	= DSS_VBP(32) | DSS_VFP(1) | DSS_VSW(3),
-	.divisor	= 3 | (1 << 16),
-	.data_lines	= LCD_INTERFACE_24_BIT,
-	.panel_type	= ACTIVE_DISPLAY,
-	.load_mode	= 2,
-	.gfx_format	= GFXFORMAT_RGB16,
-};
-
-static const struct panel_config preset_dvi_1280X960 = {
-	.lcd_size	= PANEL_LCD_SIZE(1280, 960),
-	.timing_h	= DSS_HBP(312) | DSS_HFP(96) | DSS_HSW(112),
-	.timing_v	= DSS_VBP(36) | DSS_VFP(1) | DSS_VSW(3),
-	.divisor	= 3 | (1 << 16),
-	.data_lines	= LCD_INTERFACE_24_BIT,
-	.panel_type	= ACTIVE_DISPLAY,
-	.load_mode	= 2,
-	.gfx_format	= GFXFORMAT_RGB16,
-};
-
-static const struct panel_config preset_dvi_1280X1024 = {
-	.lcd_size	= PANEL_LCD_SIZE(1280, 1024),
-	.timing_h	= DSS_HBP(248) | DSS_HFP(48) | DSS_HSW(112),
-	.timing_v	= DSS_VBP(38) | DSS_VFP(1) | DSS_VSW(3),
-	.divisor	= 3 | (1 << 16),
-	.data_lines	= LCD_INTERFACE_24_BIT,
-	.panel_type	= ACTIVE_DISPLAY,
-	.load_mode	= 2,
-	.gfx_format	= GFXFORMAT_RGB16,
-};
-
-/*
- * set_resolution_params()
- *
- * Due to usage of multiple display related APIs resolution data is located in
- * more than one place. This function updates them all.
- */
-static void set_resolution_params(int x, int y)
-{
-	panel_cfg.lcd_size = PANEL_LCD_SIZE(x, y);
-	panel_info.vl_col = x;
-	panel_info.vl_row = y;
-	lcd_line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8;
-}
-
-static void set_preset(const struct panel_config preset, int x_res, int y_res)
-{
-	panel_cfg = preset;
-	set_resolution_params(x_res, y_res);
-}
-
-static enum display_type set_dvi_preset(const struct panel_config preset,
-					int x_res, int y_res)
-{
-	set_preset(preset, x_res, y_res);
-	return DVI;
-}
-
-/*
- * parse_mode() - parse the mode parameter of custom lcd settings
- *
- * @mode:	<res_x>x<res_y>
- *
- * Returns -1 on error, 0 on success.
- */
-static int parse_mode(const char *mode)
-{
-	unsigned int modelen = strlen(mode);
-	int res_specified = 0;
-	unsigned int xres = 0, yres = 0;
-	int yres_specified = 0;
-	int i;
-
-	for (i = modelen - 1; i >= 0; i--) {
-		switch (mode[i]) {
-		case 'x':
-			if (!yres_specified) {
-				yres = simple_strtoul(&mode[i + 1], NULL, 0);
-				yres_specified = 1;
-			} else {
-				goto done_parsing;
-			}
-
-			break;
-		case '0' ... '9':
-			break;
-		default:
-			goto done_parsing;
-		}
-	}
-
-	if (i < 0 && yres_specified) {
-		xres = simple_strtoul(mode, NULL, 0);
-		res_specified = 1;
-	}
-
-done_parsing:
-	if (res_specified) {
-		set_resolution_params(xres, yres);
-	} else {
-		printf("LCD: invalid mode: %s\n", mode);
-		return -1;
-	}
-
-	return 0;
-}
-
-#define PIXEL_CLK_NUMERATOR (26 * 432 / 39)
-/*
- * parse_pixclock() - Parse the pixclock parameter of custom lcd settings
- *
- * @pixclock:	the desired pixel clock
- *
- * Returns -1 on error, 0 on success.
- *
- * Handling the pixel_clock:
- *
- * Pixel clock is defined in the OMAP35x TRM as follows:
- * pixel_clock =
- * (SYS_CLK * 2 * PRCM.CM_CLKSEL2_PLL[18:8]) /
- * (DSS.DISPC_DIVISOR[23:16] * DSS.DISPC_DIVISOR[6:0] *
- * PRCM.CM_CLKSEL_DSS[4:0] * (PRCM.CM_CLKSEL2_PLL[6:0] + 1))
- *
- * In practice, this means that in order to set the
- * divisor for the desired pixel clock one needs to
- * solve the following equation:
- *
- * 26 * 432 / (39 * <pixel_clock>) = DSS.DISPC_DIVISOR[6:0]
- *
- * NOTE: the explicit equation above is reduced. Do not
- * try to infer anything from these numbers.
- */
-static int parse_pixclock(char *pixclock)
-{
-	int divisor, pixclock_val;
-	char *pixclk_start = pixclock;
-
-	pixclock_val = simple_strtoul(pixclock, &pixclock, 10);
-	divisor = DIV_ROUND_UP(PIXEL_CLK_NUMERATOR, pixclock_val);
-	/* 0 and 1 are illegal values for PCD */
-	if (divisor <= 1)
-		divisor = 2;
-
-	panel_cfg.divisor = divisor | (1 << 16);
-	if (pixclock[0] != '\0') {
-		printf("LCD: invalid value for pixclock:%s\n", pixclk_start);
-		return -1;
-	}
-
-	return 0;
-}
-
-/*
- * parse_setting() - parse a single setting of custom lcd parameters
- *
- * @setting:	The custom lcd setting <name>:<value>
- *
- * Returns -1 on failure, 0 on success.
- */
-static int parse_setting(char *setting)
-{
-	int num_val;
-	char *setting_start = setting;
-
-	if (!strncmp(setting, "mode:", 5)) {
-		return parse_mode(setting + 5);
-	} else if (!strncmp(setting, "pixclock:", 9)) {
-		return parse_pixclock(setting + 9);
-	} else if (!strncmp(setting, "left:", 5)) {
-		num_val = simple_strtoul(setting + 5, &setting, 0);
-		panel_cfg.timing_h |= DSS_HBP(num_val);
-	} else if (!strncmp(setting, "right:", 6)) {
-		num_val = simple_strtoul(setting + 6, &setting, 0);
-		panel_cfg.timing_h |= DSS_HFP(num_val);
-	} else if (!strncmp(setting, "upper:", 6)) {
-		num_val = simple_strtoul(setting + 6, &setting, 0);
-		panel_cfg.timing_v |= DSS_VBP(num_val);
-	} else if (!strncmp(setting, "lower:", 6)) {
-		num_val = simple_strtoul(setting + 6, &setting, 0);
-		panel_cfg.timing_v |= DSS_VFP(num_val);
-	} else if (!strncmp(setting, "hsynclen:", 9)) {
-		num_val = simple_strtoul(setting + 9, &setting, 0);
-		panel_cfg.timing_h |= DSS_HSW(num_val);
-	} else if (!strncmp(setting, "vsynclen:", 9)) {
-		num_val = simple_strtoul(setting + 9, &setting, 0);
-		panel_cfg.timing_v |= DSS_VSW(num_val);
-	} else if (!strncmp(setting, "hsync:", 6)) {
-		if (simple_strtoul(setting + 6, &setting, 0) == 0)
-			panel_cfg.pol_freq |= DSS_IHS;
-		else
-			panel_cfg.pol_freq &= ~DSS_IHS;
-	} else if (!strncmp(setting, "vsync:", 6)) {
-		if (simple_strtoul(setting + 6, &setting, 0) == 0)
-			panel_cfg.pol_freq |= DSS_IVS;
-		else
-			panel_cfg.pol_freq &= ~DSS_IVS;
-	} else if (!strncmp(setting, "outputen:", 9)) {
-		if (simple_strtoul(setting + 9, &setting, 0) == 0)
-			panel_cfg.pol_freq |= DSS_IEO;
-		else
-			panel_cfg.pol_freq &= ~DSS_IEO;
-	} else if (!strncmp(setting, "pixclockpol:", 12)) {
-		if (simple_strtoul(setting + 12, &setting, 0) == 0)
-			panel_cfg.pol_freq |= DSS_IPC;
-		else
-			panel_cfg.pol_freq &= ~DSS_IPC;
-	} else if (!strncmp(setting, "active", 6)) {
-		panel_cfg.panel_type = ACTIVE_DISPLAY;
-		return 0; /* Avoid sanity check below */
-	} else if (!strncmp(setting, "passive", 7)) {
-		panel_cfg.panel_type = PASSIVE_DISPLAY;
-		return 0; /* Avoid sanity check below */
-	} else if (!strncmp(setting, "display:", 8)) {
-		if (!strncmp(setting + 8, "dvi", 3)) {
-			lcd_def = DVI_CUSTOM;
-			return 0; /* Avoid sanity check below */
-		}
-	} else {
-		printf("LCD: unknown option %s\n", setting_start);
-		return -1;
-	}
-
-	if (setting[0] != '\0') {
-		printf("LCD: invalid value for %s\n", setting_start);
-		return -1;
-	}
-
-	return 0;
-}
-
-/*
- * env_parse_customlcd() - parse custom lcd params from an environment variable.
- *
- * @custom_lcd_params:	The environment variable containing the lcd params.
- *
- * Returns -1 on failure, 0 on success.
- */
-static int parse_customlcd(char *custom_lcd_params)
-{
-	char params_cpy[160];
-	char *setting;
-
-	strncpy(params_cpy, custom_lcd_params, 160);
-	setting = strtok(params_cpy, ",");
-	while (setting) {
-		if (parse_setting(setting) < 0)
-			return -1;
-
-		setting = strtok(NULL, ",");
-	}
-
-	/* Currently we don't support changing this via custom lcd params */
-	panel_cfg.data_lines = LCD_INTERFACE_24_BIT;
-	panel_cfg.gfx_format = GFXFORMAT_RGB16; /* See dvi predefines note */
-
-	return 0;
-}
-
-/*
- * env_parse_displaytype() - parse display type.
- *
- * Parses the environment variable "displaytype", which contains the
- * name of the display type or preset, in which case it applies its
- * configurations.
- *
- * Returns the type of display that was specified.
- */
-static enum display_type env_parse_displaytype(char *displaytype)
-{
-	if (!strncmp(displaytype, "dvi640x480", 10))
-		return set_dvi_preset(preset_dvi_640X480, 640, 480);
-	else if (!strncmp(displaytype, "dvi800x600", 10))
-		return set_dvi_preset(preset_dvi_800X600, 800, 600);
-	else if (!strncmp(displaytype, "dvi1024x768", 11))
-		return set_dvi_preset(preset_dvi_1024X768, 1024, 768);
-	else if (!strncmp(displaytype, "dvi1152x864", 11))
-		return set_dvi_preset(preset_dvi_1152X864, 1152, 864);
-	else if (!strncmp(displaytype, "dvi1280x960", 11))
-		return set_dvi_preset(preset_dvi_1280X960, 1280, 960);
-	else if (!strncmp(displaytype, "dvi1280x1024", 12))
-		return set_dvi_preset(preset_dvi_1280X1024, 1280, 1024);
-
-	return NONE;
-}
-
-void lcd_ctrl_init(void *lcdbase)
-{
-	struct prcm *prcm = (struct prcm *)PRCM_BASE;
-	char *custom_lcd;
-	char *displaytype = getenv("displaytype");
-
-	if (displaytype == NULL)
-		return;
-
-	lcd_def = env_parse_displaytype(displaytype);
-	/* If we did not recognize the preset, check if it's an env variable */
-	if (lcd_def == NONE) {
-		custom_lcd = getenv(displaytype);
-		if (custom_lcd == NULL || parse_customlcd(custom_lcd) < 0)
-			return;
-	}
-
-	panel_cfg.frame_buffer = lcdbase;
-	omap3_dss_panel_config(&panel_cfg);
-	/*
-	 * Pixel clock is defined with many divisions and only few
-	 * multiplications of the system clock. Since DSS FCLK divisor is set
-	 * to 16 by default, we need to set it to a smaller value, like 3
-	 * (chosen via trial and error).
-	 */
-	clrsetbits_le32(&prcm->clksel_dss, 0xF, 3);
-}
-
-void lcd_enable(void)
-{
-	if (lcd_def == DVI || lcd_def == DVI_CUSTOM) {
-		gpio_direction_output(54, 0); /* Turn on DVI */
-		omap3_dss_enable();
-	}
-}
-
-void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) {}
diff --git a/board/cm_t35/eeprom.c b/board/cm_t35/eeprom.c
deleted file mode 100644
index b0af103cdd..0000000000
--- a/board/cm_t35/eeprom.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * (C) Copyright 2011 CompuLab, Ltd. <www.compulab.co.il>
- *
- * Authors: Nikita Kiryanov <nikita@compulab.co.il>
- *	    Igor Grinberg <grinberg@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-
-#include <common.h>
-#include <i2c.h>
-
-#define EEPROM_LAYOUT_VER_OFFSET	44
-#define BOARD_SERIAL_OFFSET		20
-#define BOARD_SERIAL_OFFSET_LEGACY	8
-#define BOARD_REV_OFFSET		0
-#define BOARD_REV_OFFSET_LEGACY		6
-#define BOARD_REV_SIZE			2
-#define MAC_ADDR_OFFSET			4
-#define MAC_ADDR_OFFSET_LEGACY		0
-
-#define LAYOUT_INVALID	0
-#define LAYOUT_LEGACY	0xff
-
-static int eeprom_layout; /* Implicitly LAYOUT_INVALID */
-
-static int cm_t3x_eeprom_read(uint offset, uchar *buf, int len)
-{
-	return i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, offset,
-			CONFIG_SYS_I2C_EEPROM_ADDR_LEN, buf, len);
-}
-
-static int eeprom_setup_layout(void)
-{
-	int res;
-
-	if (eeprom_layout != LAYOUT_INVALID)
-		return 0;
-
-	res = cm_t3x_eeprom_read(EEPROM_LAYOUT_VER_OFFSET,
-						(uchar *)&eeprom_layout, 1);
-	if (res) {
-		eeprom_layout = LAYOUT_INVALID;
-		return res;
-	}
-
-	if (eeprom_layout == 0 || eeprom_layout >= 0x20)
-		eeprom_layout = LAYOUT_LEGACY;
-
-	return 0;
-}
-
-void get_board_serial(struct tag_serialnr *serialnr)
-{
-	u32 serial[2];
-	uint offset;
-
-	memset(serialnr, 0, sizeof(*serialnr));
-	if (eeprom_setup_layout())
-		return;
-
-	offset = (eeprom_layout != LAYOUT_LEGACY) ?
-			BOARD_SERIAL_OFFSET : BOARD_SERIAL_OFFSET_LEGACY;
-	if (cm_t3x_eeprom_read(offset, (uchar *)serial, 8))
-		return;
-
-	if (serial[0] != 0xffffffff && serial[1] != 0xffffffff) {
-		serialnr->low = serial[0];
-		serialnr->high = serial[1];
-	}
-}
-
-/*
- * Routine: cm_t3x_eeprom_read_mac_addr
- * Description: read mac address and store it in buf.
- */
-int cm_t3x_eeprom_read_mac_addr(uchar *buf)
-{
-	uint offset;
-
-	if (eeprom_setup_layout())
-		return 0;
-
-	offset = (eeprom_layout != LAYOUT_LEGACY) ?
-			MAC_ADDR_OFFSET : MAC_ADDR_OFFSET_LEGACY;
-	return cm_t3x_eeprom_read(offset, buf, 6);
-}
-
-/*
- * Routine: cm_t3x_eeprom_get_board_rev
- * Description: read system revision from eeprom
- */
-u32 cm_t3x_eeprom_get_board_rev(void)
-{
-	u32 rev = 0;
-	char str[5]; /* Legacy representation can contain at most 4 digits */
-	uint offset = BOARD_REV_OFFSET_LEGACY;
-
-	if (eeprom_setup_layout())
-		return 0;
-
-	if (eeprom_layout != LAYOUT_LEGACY)
-		offset = BOARD_REV_OFFSET;
-
-	if (cm_t3x_eeprom_read(offset, (uchar *)&rev, BOARD_REV_SIZE))
-		return 0;
-
-	/*
-	 * Convert legacy syntactic representation to semantic
-	 * representation. i.e. for rev 1.00: 0x100 --> 0x64
-	 */
-	if (eeprom_layout == LAYOUT_LEGACY) {
-		sprintf(str, "%x", rev);
-		rev = simple_strtoul(str, NULL, 10);
-	}
-
-	return rev;
-};
diff --git a/board/cm_t35/eeprom.h b/board/cm_t35/eeprom.h
deleted file mode 100644
index 38824d162b..0000000000
--- a/board/cm_t35/eeprom.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * (C) Copyright 2011 CompuLab, Ltd. <www.compulab.co.il>
- *
- * Authors: Nikita Kiryanov <nikita@compulab.co.il>
- *	    Igor Grinberg <grinberg@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-#ifndef _EEPROM_
-#define _EEPROM_
-
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
-int cm_t3x_eeprom_read_mac_addr(uchar *buf);
-u32 cm_t3x_eeprom_get_board_rev(void);
-#else
-static inline int cm_t3x_eeprom_read_mac_addr(uchar *buf)
-{
-	return 1;
-}
-static inline u32 cm_t3x_eeprom_get_board_rev(void)
-{
-	return 0;
-}
-#endif
-
-#endif
diff --git a/board/cm_t35/leds.c b/board/cm_t35/leds.c
deleted file mode 100644
index 48ad598d90..0000000000
--- a/board/cm_t35/leds.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * (C) Copyright 2011
- * CompuLab, Ltd. <www.compulab.co.il>
- *
- * Author: Igor Grinberg <grinberg@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
- */
-#include <common.h>
-#include <status_led.h>
-#include <asm/gpio.h>
-
-static unsigned int leds[] = { GREEN_LED_GPIO };
-
-void __led_init(led_id_t mask, int state)
-{
-	if (gpio_request(leds[mask], "") != 0) {
-		printf("%s: failed requesting GPIO%u\n", __func__, leds[mask]);
-		return;
-	}
-
-	gpio_direction_output(leds[mask], 0);
-}
-
-void __led_set(led_id_t mask, int state)
-{
-	gpio_set_value(leds[mask], state == STATUS_LED_ON);
-}
-
-void __led_toggle(led_id_t mask)
-{
-	gpio_set_value(leds[mask], !gpio_get_value(leds[mask]));
-}