diff options
| author | Tom Rini <trini@konsulko.com> | 2017-03-14 11:08:10 -0400 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2017-04-05 13:52:01 -0400 |
| commit | ea3310e8aafad1da72d9a5e60568d725cbdefdbd (patch) | |
| tree | 869faa824f09ce4d40f2ce503a607ceb28b5ce91 /board/bf609-ezkit/soft_switch.h | |
| parent | c3b7cfe15ec1db047182d4ec55a3ce05f19bdf38 (diff) | |
Blackfin: Remove
The architecture is currently unmaintained, remove.
Cc: Benjamin Matthews <mben12@gmail.com>
Cc: Chong Huang <chuang@ucrobotics.com>
Cc: Dimitar Penev <dpn@switchfin.org>
Cc: Haitao Zhang <hzhang@ucrobotics.com>
Cc: I-SYST Micromodule <support@i-syst.com>
Cc: M.Hasewinkel (MHA) <info@ssv-embedded.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Martin Strubel <strubel@section5.ch>
Cc: Peter Meerwald <devel@bct-electronic.com>
Cc: Sonic Zhang <sonic.adi@gmail.com>
Cc: Valentin Yakovenkov <yakovenkov@niistt.ru>
Cc: Wojtek Skulski <info@skutek.com>
Cc: Wojtek Skulski <skulski@pas.rochester.edu>
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'board/bf609-ezkit/soft_switch.h')
| -rw-r--r-- | board/bf609-ezkit/soft_switch.h | 80 |
1 files changed, 0 insertions, 80 deletions
diff --git a/board/bf609-ezkit/soft_switch.h b/board/bf609-ezkit/soft_switch.h deleted file mode 100644 index 75d64e279a..0000000000 --- a/board/bf609-ezkit/soft_switch.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * U-Boot - main board file - * - * Copyright (c) 2008-2011 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef __BOARD_SOFT_SWITCH_H__ -#define __BOARD_SOFT_SWITCH_H__ - -#include <asm/soft_switch.h> - -/* switch 0 port A */ -#define CAN_EN 0x1 -#define CAN_STB 0x2 -#define CAN0_ERR_EN 0x4 -#define CAN0RX_EN 0x8 -#define CNT0UD_EN 0x10 -#define CNT0DG_EN 0x20 -#define CNT0ZM_EN 0x40 -#define RMII_CLK_EN 0x80 - -/* switch 0 port B */ -#define UART0RTS_EN 0x1 -#define UART0RX_EN 0x2 -#define UART0CTS_EN 0x4 -#define UART0CTS_RTS_LPBK 0x8 -#define UART0CTS_RST_EN 0x10 -#define UART0CTS_146_EN 0x20 -#define TEMP_IRQ_EN 0x40 -#define TEMP_THERM_EN 0x80 - -/* switch 1 port A */ -#define OVERRIDE_SMC0_LP0_BOOT 0x1 -#define SMC0_EPPI2_LP1_SWITCH 0x2 -#define SMC0_LP0_EN 0x8 -#define LED1_GPIO_EN 0x10 -#define LED2_GPIO_EN 0x20 -#define LED3_GPIO_EN 0x40 -#define LED4_GPIO_EN 0x80 - -/* switch 1 port B */ -#define PUSHBUTTON1_EN 0x1 -#define PUSHBUTTON2_EN 0x2 -#define SD_CD_EN 0x4 -#define SD_WP_EN 0x8 -#define SPIFLASH_CS_EN 0x10 -#define SPI0D2_EN 0x20 -#define SPI0D3_EN 0x40 - -/* switch 2 port A */ -#define PHYINT_EN 0x1 -#define PHY_PWR_DWN_INT 0x2 -#define PHYAD0 0x4 -#define ETHERNET_EN 0x8 -#define WAKE_PUSHBUTTON_EN 0x10 -#define PD0_SPI0D2_EN 0x20 -#define PD1_SPI0D3_EN 0x40 -#define PD2_SPI0MISO_EN 0x80 - -/* switch 2 port B */ -#define PD3_SPI0MOSI_EN 0x1 -#define PD4_SPI0CK_EN 0x2 - -#ifdef CONFIG_BFIN_BOARD_VERSION_1_0 -#define SWITCH_ADDR 0x21 -#else -#define SWITCH_ADDR 0x20 -#endif - -#define NUM_SWITCH 3 -#define IODIRA 0x0 -#define IODIRB 0x1 -#define OLATA 0x14 -#define OLATB 0x15 - -int setup_board_switches(void); - -#endif /* __BOARD_SOFT_SWITCH_H__ */ |