Blackfin: bf537-stamp: post: update old MMR style macros

The old MMR defines are being scrubbed, so convert the driver to use the
new standard helper macros.

For the GPIO MMR usage, convert to the new GPIO framework.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

1 files changed, 48 insertions, 104 deletions

diff --git a/board/bf537-stamp/post.c b/board/bf537-stamp/post.c
index c546ab6cb6..60eed5f68a 100644
--- a/board/bf537-stamp/post.c
+++ b/board/bf537-stamp/post.c
@@ -12,6 +12,7 @@
 #include <config.h>
 #include <command.h>
 #include <asm/blackfin.h>
+#include <asm/gpio.h>
 
 /* Using sw10-PF5 as the hotkey */
 int post_hotkeys_pressed(void)
@@ -20,14 +21,13 @@ int post_hotkeys_pressed(void)
 	int i;
 	unsigned short value;
 
-	*pPORTF_FER &= ~PF5;
-	*pPORTFIO_DIR &= ~PF5;
-	*pPORTFIO_INEN |= PF5;
+	gpio_request(GPIO_PF5, "post");
+	gpio_direction_input(GPIO_PF5);
 
 	printf("########Press SW10 to enter Memory POST########: %2d ", delay);
 	while (delay--) {
 		for (i = 0; i < 100; i++) {
-			value = *pPORTFIO & PF5;
+			value = gpio_get_value(GPIO_PF5);
 			if (value != 0) {
 				break;
 			}
@@ -43,6 +43,8 @@ int post_hotkeys_pressed(void)
 		printf("Hotkey has been pressed, Enter POST . . . . . .\n");
 		return 1;
 	}
+
+	gpio_free(GPIO_PF5);
 }
 
 int uart_post_test(int flags)
@@ -106,34 +108,24 @@ int flash_post_test(int flags)
  ****************************************************/
 int led_post_test(int flags)
 {
-	*pPORTF_FER &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
-	*pPORTFIO_DIR |= PF6 | PF7 | PF8 | PF9 | PF10 | PF11;
-	*pPORTFIO_INEN &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
-	*pPORTFIO &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
-	udelay(1000000);
-	printf("LED1 on");
-	*pPORTFIO |= PF6;
-	udelay(1000000);
-	printf("\b\b\b\b\b\b\b");
-	printf("LED2 on");
-	*pPORTFIO |= PF7;
-	udelay(1000000);
-	printf("\b\b\b\b\b\b\b");
-	printf("LED3 on");
-	*pPORTFIO |= PF8;
-	udelay(1000000);
-	printf("\b\b\b\b\b\b\b");
-	printf("LED4 on");
-	*pPORTFIO |= PF9;
-	udelay(1000000);
-	printf("\b\b\b\b\b\b\b");
-	printf("LED5 on");
-	*pPORTFIO |= PF10;
-	udelay(1000000);
-	printf("\b\b\b\b\b\b\b");
-	printf("lED6 on");
-	*pPORTFIO |= PF11;
-	printf("\b\b\b\b\b\b\b ");
+	unsigned int leds[] = {
+		GPIO_PF6, GPIO_PF7, GPIO_PF8,
+		GPIO_PF9, GPIO_PF10, GPIO_PF11,
+	};
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(leds); ++i) {
+		gpio_request(leds[i], "post");
+		gpio_direction_output(leds[i], 0);
+
+		printf("LED%i on", i + 1);
+		gpio_set_value(leds[i], 1);
+		udelay(1000000);
+		printf("\b\b\b\b\b\b\b");
+
+		gpio_free(leds[i]);
+	}
+
 	return 0;
 }
 
@@ -143,88 +135,40 @@ int led_post_test(int flags)
  ************************************************/
 int button_post_test(int flags)
 {
+	unsigned int buttons[] = {
+		GPIO_PF2, GPIO_PF3, GPIO_PF4, GPIO_PF5,
+	};
+	unsigned int sws[] = { 13, 12, 11, 10, };
 	int i, delay = 5;
 	unsigned short value = 0;
 	int result = 0;
 
-	*pPORTF_FER &= ~(PF5 | PF4 | PF3 | PF2);
-	*pPORTFIO_DIR &= ~(PF5 | PF4 | PF3 | PF2);
-	*pPORTFIO_INEN |= (PF5 | PF4 | PF3 | PF2);
+	for (i = 0; i < ARRAY_SIZE(buttons); ++i) {
+		gpio_request(buttons[i], "post");
+		gpio_direction_input(buttons[i]);
 
-	printf("\n--------Press SW10: %2d ", delay);
-	while (delay--) {
-		for (i = 0; i < 100; i++) {
-			value = *pPORTFIO & PF5;
-			if (value != 0) {
-				break;
+		delay = 5;
+		printf("\n--------Press SW%i: %2d ", sws[i], delay);
+		while (delay--) {
+			for (i = 0; i < 100; i++) {
+				value = gpio_get_value(buttons[i]);
+				if (value != 0)
+					break;
+				udelay(10000);
 			}
-			udelay(10000);
+			printf("\b\b\b%2d ", delay);
 		}
-		printf("\b\b\b%2d ", delay);
-	}
-	if (value != 0)
-		printf("\b\bOK");
-	else {
-		result = -1;
-		printf("\b\bfailed");
-	}
-
-	delay = 5;
-	printf("\n--------Press SW11: %2d ", delay);
-	while (delay--) {
-		for (i = 0; i < 100; i++) {
-			value = *pPORTFIO & PF4;
-			if (value != 0) {
-				break;
-			}
-			udelay(10000);
+		if (value != 0)
+			puts("\b\bOK");
+		else {
+			result = -1;
+			puts("\b\bfailed");
 		}
-		printf("\b\b\b%2d ", delay);
-	}
-	if (value != 0)
-		printf("\b\bOK");
-	else {
-		result = -1;
-		printf("\b\bfailed");
-	}
 
-	delay = 5;
-	printf("\n--------Press SW12: %2d ", delay);
-	while (delay--) {
-		for (i = 0; i < 100; i++) {
-			value = *pPORTFIO & PF3;
-			if (value != 0) {
-				break;
-			}
-			udelay(10000);
-		}
-		printf("\b\b\b%2d ", delay);
-	}
-	if (value != 0)
-		printf("\b\bOK");
-	else {
-		result = -1;
-		printf("\b\bfailed");
+		gpio_free(buttons[i]);
 	}
 
-	delay = 5;
-	printf("\n--------Press SW13: %2d ", delay);
-	while (delay--) {
-		for (i = 0; i < 100; i++) {
-			value = *pPORTFIO & PF2;
-			if (value != 0) {
-				break;
-			}
-			udelay(10000);
-		}
-		printf("\b\b\b%2d ", delay);
-	}
-	if (value != 0)
-		printf("\b\bOK");
-	else {
-		result = -1;
-		printf("\b\bfailed");
-	}
-	printf("\n");
+	puts("\n");
+
 	return result;
 }