rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

5 files changed, 26 insertions, 26 deletions

diff --git a/board/bf533-ezkit/bf533-ezkit.c b/board/bf533-ezkit/bf533-ezkit.c
index 583560adb32..42c4b505551 100644
--- a/board/bf533-ezkit/bf533-ezkit.c
+++ b/board/bf533-ezkit/bf533-ezkit.c
@@ -50,12 +50,12 @@ phys_size_t initdram(int board_type)
 	printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
 	       "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
 	       3, 3, 6, 2, 3);
-	printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
-	printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE >> 20);
+	printf("SDRAM Begin: 0x%x\n", CONFIG_SYS_SDRAM_BASE);
+	printf("Bank size = %d MB\n", CONFIG_SYS_MAX_RAM_SIZE >> 20);
 #endif
-	gd->bd->bi_memstart = CFG_SDRAM_BASE;
-	gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
-	return CFG_MAX_RAM_SIZE;
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
+	return CONFIG_SYS_MAX_RAM_SIZE;
 }
 
 #if defined(CONFIG_MISC_INIT_R)
@@ -63,10 +63,10 @@ phys_size_t initdram(int board_type)
 int misc_init_r(void)
 {
 	/* Set direction bits for Video en/decoder reset as output      */
-	*(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DIR) =
+	*(volatile unsigned char *)(CONFIG_SYS_FLASH1_BASE + PSD_PORTA_DIR) =
 	    PSDA_VDEC_RST | PSDA_VENC_RST;
 	/* Deactivate Video en/decoder reset lines                      */
-	*(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DOUT) =
+	*(volatile unsigned char *)(CONFIG_SYS_FLASH1_BASE + PSD_PORTA_DOUT) =
 	    PSDA_VDEC_RST | PSDA_VENC_RST;
 
 	return 0;
diff --git a/board/bf533-ezkit/flash-defines.h b/board/bf533-ezkit/flash-defines.h
index 4e043e072b7..1a4aa5f2f70 100644
--- a/board/bf533-ezkit/flash-defines.h
+++ b/board/bf533-ezkit/flash-defines.h
@@ -49,10 +49,10 @@
 #define FLASH_TOT_SECT		40
 #define FLASH_SIZE		0x220000
 #define FLASH_MAN_ST		2
-#define CFG_FLASH0_BASE		0x20000000
+#define CONFIG_SYS_FLASH0_BASE		0x20000000
 #define RESET_VAL		0xF0
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 int get_codes(void);
 int poll_toggle_bit(long lOffset);
diff --git a/board/bf533-ezkit/flash.c b/board/bf533-ezkit/flash.c
index cdf4dc69ba4..a861e16a3df 100644
--- a/board/bf533-ezkit/flash.c
+++ b/board/bf533-ezkit/flash.c
@@ -82,7 +82,7 @@ unsigned long flash_init(void)
 
 	size_b0 = size_b1 = size_b2 = 0;
 #ifdef DEBUG
-	printf("Flash Memory Start 0x%x\n", CFG_FLASH_BASE);
+	printf("Flash Memory Start 0x%x\n", CONFIG_SYS_FLASH_BASE);
 	printf("Memory Map for the Flash\n");
 	printf("0x20000000 - 0x200FFFFF Flash A Primary (1MB)\n");
 	printf("0x20100000 - 0x201FFFFF Flash B Primary (1MB)\n");
@@ -90,20 +90,20 @@ unsigned long flash_init(void)
 	printf("0x20280000 - 0x2028FFFF Flash B Secondary (64KB)\n");
 	printf("Please type command flinfo for information on Sectors \n");
 #endif
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
-	size_b0 = flash_get_size(CFG_FLASH0_BASE, &flash_info[0], 0);
-	size_b1 = flash_get_size(CFG_FLASH0_BASE, &flash_info[1], 1);
-	size_b2 = flash_get_size(CFG_FLASH0_BASE, &flash_info[2], 2);
+	size_b0 = flash_get_size(CONFIG_SYS_FLASH0_BASE, &flash_info[0], 0);
+	size_b1 = flash_get_size(CONFIG_SYS_FLASH0_BASE, &flash_info[1], 1);
+	size_b2 = flash_get_size(CONFIG_SYS_FLASH0_BASE, &flash_info[2], 2);
 
 	if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
 		printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
 		       size_b0, size_b0 >> 20);
 	}
 
-	(void)flash_protect(FLAG_PROTECT_SET, CFG_FLASH0_BASE,
+	(void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_FLASH0_BASE,
 			    (flash_info[0].start[2] - 1), &flash_info[0]);
 
 	return (size_b0 + size_b1 + size_b2);
@@ -180,7 +180,7 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 	int ret;
 	int d;
 	if (addr % 2) {
-		read_flash(addr - 1 - CFG_FLASH_BASE, &d);
+		read_flash(addr - 1 - CONFIG_SYS_FLASH_BASE, &d);
 		d = (int)((d & 0x00FF) | (*src++ << 8));
 		ret = write_data(addr - 1, 2, (uchar *) & d);
 		if (ret == FLASH_FAIL)
@@ -196,7 +196,7 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 int write_data(long lStart, long lCount, uchar * pnData)
 {
 	long i = 0;
-	unsigned long ulOffset = lStart - CFG_FLASH_BASE;
+	unsigned long ulOffset = lStart - CONFIG_SYS_FLASH_BASE;
 	int d;
 	int nSector = 0;
 	int flag = 0;
@@ -285,7 +285,7 @@ int write_flash(long nOffset, int nValue)
 {
 	long addr;
 
-	addr = (CFG_FLASH_BASE + nOffset);
+	addr = (CONFIG_SYS_FLASH_BASE + nOffset);
 	SSYNC();
 	*(unsigned volatile short *)addr = nValue;
 	SSYNC();
@@ -297,7 +297,7 @@ int write_flash(long nOffset, int nValue)
 int read_flash(long nOffset, int *pnValue)
 {
 	int nValue = 0x0;
-	long addr = (CFG_FLASH_BASE + nOffset);
+	long addr = (CONFIG_SYS_FLASH_BASE + nOffset);
 
 	if (nOffset != 0x2)
 		reset_flash();
@@ -396,7 +396,7 @@ int erase_block_flash(int nBlock, unsigned long address)
 	if ((nBlock < 0) || (nBlock > AFP_NumSectors))
 		return FALSE;
 
-	ulSectorOff = (address - CFG_FLASH_BASE);
+	ulSectorOff = (address - CONFIG_SYS_FLASH_BASE);
 
 	write_flash((WRITESEQ1 | ulSectorOff), WRITEDATA1);
 	write_flash((WRITESEQ2 | ulSectorOff), WRITEDATA2);
diff --git a/board/bf533-ezkit/psd4256.h b/board/bf533-ezkit/psd4256.h
index cc654b89561..9b381d27fec 100644
--- a/board/bf533-ezkit/psd4256.h
+++ b/board/bf533-ezkit/psd4256.h
@@ -27,8 +27,8 @@
 
 /*
  * Flash A/B Port A configuration registers.
- * Addresses are offset values to CFG_FLASH1_BASE
- * for Flash A and CFG_FLASH2_BASE for Flash B.
+ * Addresses are offset values to CONFIG_SYS_FLASH1_BASE
+ * for Flash A and CONFIG_SYS_FLASH2_BASE for Flash B.
  */
 
 #define	PSD_PORTA_DIN	0x070000
@@ -37,8 +37,8 @@
 
 /*
  * Flash A/B Port B configuration registers
- * Addresses are offset values to CFG_FLASH1_BASE
- * for Flash A and CFG_FLASH2_BASE for Flash B.
+ * Addresses are offset values to CONFIG_SYS_FLASH1_BASE
+ * for Flash A and CONFIG_SYS_FLASH2_BASE for Flash B.
  */
 
 #define	PSD_PORTB_DIN	0x070001
diff --git a/board/bf533-ezkit/u-boot.lds.S b/board/bf533-ezkit/u-boot.lds.S
index 1fedbc5fb7b..538a19f81b4 100644
--- a/board/bf533-ezkit/u-boot.lds.S
+++ b/board/bf533-ezkit/u-boot.lds.S
@@ -36,7 +36,7 @@
  * for different CPU's which may lack non-cache L1 data.
  */
 #ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM      CFG_MONITOR_BASE
+# define L1_DATA_B_SRAM      CONFIG_SYS_MONITOR_BASE
 # define L1_DATA_B_SRAM_SIZE 0
 #endif
 
@@ -45,7 +45,7 @@ OUTPUT_ARCH(bfin)
 /* The 0xC offset is so we don't clobber the tiny LDR jump block. */
 MEMORY
 {
-	ram     : ORIGIN = CFG_MONITOR_BASE, LENGTH = CFG_MONITOR_LEN
+	ram     : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
 	l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE
 	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
 }