diff options
author | Tom Rini <trini@ti.com> | 2015-02-10 10:40:43 -0500 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2015-02-10 10:40:43 -0500 |
commit | 307367eaffc8638e10ba1784fc66bfe623ae79e2 (patch) | |
tree | 087641ed4c29320f8759cda28e377e36ff82cb78 /board/barco/platinum/platinum_picon.c | |
parent | a4fb5df214c7e8d5bc949c1068d92252f105427a (diff) | |
parent | aee0013e53b339a573e2a8d66062fe87765aa3bd (diff) |
Merge branch 'master' of git://www.denx.de/git/u-boot-imx
Diffstat (limited to 'board/barco/platinum/platinum_picon.c')
-rw-r--r-- | board/barco/platinum/platinum_picon.c | 244 |
1 files changed, 244 insertions, 0 deletions
diff --git a/board/barco/platinum/platinum_picon.c b/board/barco/platinum/platinum_picon.c new file mode 100644 index 00000000000..b2eab766c58 --- /dev/null +++ b/board/barco/platinum/platinum_picon.c @@ -0,0 +1,244 @@ +/* + * Copyright (C) 2014, Barco (www.barco.com) + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/iomux.h> +#include <asm/arch/mx6-pins.h> +#include <asm/imx-common/iomux-v3.h> +#include <asm/imx-common/mxc_i2c.h> +#include <i2c.h> +#include <miiphy.h> + +#include "platinum.h" + +#define GPIO_IP_NCONFIG IMX_GPIO_NR(5, 18) +#define GPIO_HK_NCONFIG IMX_GPIO_NR(7, 13) +#define GPIO_LS_NCONFIG IMX_GPIO_NR(5, 19) + +#define GPIO_I2C0_SEL0 IMX_GPIO_NR(5, 2) +#define GPIO_I2C0_SEL1 IMX_GPIO_NR(1, 11) +#define GPIO_I2C0_ENBN IMX_GPIO_NR(1, 13) + +#define GPIO_I2C2_SEL0 IMX_GPIO_NR(1, 17) +#define GPIO_I2C2_SEL1 IMX_GPIO_NR(1, 20) +#define GPIO_I2C2_ENBN IMX_GPIO_NR(1, 14) + +#define GPIO_USB_RESET IMX_GPIO_NR(1, 5) + +iomux_v3_cfg_t const ecspi1_pads[] = { + MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(ECSPI1_PAD_CLK), + MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(ECSPI_PAD_MISO), + MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(ECSPI_PAD_MOSI), + MX6_PAD_CSI0_DAT7__ECSPI1_SS0 | MUX_PAD_CTRL(ECSPI_PAD_SS), + MX6_PAD_EIM_D24__ECSPI1_SS2 | MUX_PAD_CTRL(ECSPI_PAD_SS), + MX6_PAD_EIM_D25__ECSPI1_SS3 | MUX_PAD_CTRL(ECSPI_PAD_SS), +}; + +iomux_v3_cfg_t const ecspi2_pads[] = { + MX6_PAD_EIM_CS0__ECSPI2_SCLK | MUX_PAD_CTRL(ECSPI2_PAD_CLK), + MX6_PAD_EIM_OE__ECSPI2_MISO | MUX_PAD_CTRL(ECSPI_PAD_MISO), + MX6_PAD_EIM_CS1__ECSPI2_MOSI | MUX_PAD_CTRL(ECSPI_PAD_MOSI), + MX6_PAD_EIM_RW__ECSPI2_SS0 | MUX_PAD_CTRL(ECSPI_PAD_SS), + MX6_PAD_EIM_LBA__ECSPI2_SS1 | MUX_PAD_CTRL(ECSPI_PAD_SS), +}; + +iomux_v3_cfg_t const enet_pads[] = { + MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_RX_ER__ENET_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL), +}; + +/* PHY nRESET */ +iomux_v3_cfg_t const phy_reset_pad = { + MX6_PAD_SD1_DAT2__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +iomux_v3_cfg_t const uart1_pads[] = { + MX6_PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +iomux_v3_cfg_t const uart4_pads[] = { + MX6_PAD_CSI0_DAT12__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_CSI0_DAT13__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_CSI0_DAT16__UART4_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_CSI0_DAT17__UART4_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +iomux_v3_cfg_t const uart5_pads[] = { + MX6_PAD_CSI0_DAT14__UART5_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_CSI0_DAT15__UART5_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_CSI0_DAT18__UART5_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_CSI0_DAT19__UART5_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +iomux_v3_cfg_t const i2c0_mux_pads[] = { + MX6_PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_SD2_CMD__GPIO1_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_SD2_DAT2__GPIO1_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +iomux_v3_cfg_t const i2c2_mux_pads[] = { + MX6_PAD_SD1_DAT1__GPIO1_IO17 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_SD2_DAT1__GPIO1_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +struct i2c_pads_info i2c_pad_info0 = { + .scl = { + .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC_SCL, + .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC_SCL, + .gp = IMX_GPIO_NR(5, 27) + }, + .sda = { + .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC, + .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC, + .gp = IMX_GPIO_NR(5, 26) + } +}; + +struct i2c_pads_info i2c_pad_info2 = { + .scl = { + .i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC_SCL, + .gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC_SCL, + .gp = IMX_GPIO_NR(1, 3) + }, + .sda = { + .i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | PC, + .gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 | PC, + .gp = IMX_GPIO_NR(1, 6) + } +}; + +/* + * This enet related pin-muxing and GPIO handling is done + * in SPL U-Boot. For early initialization. And to give the + * PHY some time to come out of reset before the U-Boot + * ethernet driver tries to access its registers via MDIO. + */ +int platinum_setup_enet(void) +{ + struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; + unsigned phy_reset = IMX_GPIO_NR(1, 19); + + /* First configure PHY reset GPIO pin */ + imx_iomux_v3_setup_pad(phy_reset_pad); + + /* Reconfigure enet muxing while PHY is in reset */ + gpio_direction_output(phy_reset, 0); + imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); + mdelay(10); + gpio_set_value(phy_reset, 1); + udelay(100); + + /* set GPIO_16 as ENET_REF_CLK_OUT */ + setbits_le32(&iomux->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK); + + return enable_fec_anatop_clock(ENET_50MHZ); +} + +int platinum_setup_i2c(void) +{ + imx_iomux_v3_setup_multiple_pads(i2c0_mux_pads, + ARRAY_SIZE(i2c0_mux_pads)); + imx_iomux_v3_setup_multiple_pads(i2c2_mux_pads, + ARRAY_SIZE(i2c2_mux_pads)); + + mdelay(10); + + /* Disable i2c mux 0 */ + gpio_direction_output(GPIO_I2C0_SEL0, 0); + gpio_direction_output(GPIO_I2C0_SEL1, 0); + gpio_direction_output(GPIO_I2C0_ENBN, 1); + + /* Disable i2c mux 1 */ + gpio_direction_output(GPIO_I2C2_SEL0, 0); + gpio_direction_output(GPIO_I2C2_SEL1, 0); + gpio_direction_output(GPIO_I2C2_ENBN, 1); + + udelay(10); + + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0); + setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); + + /* Disable all leds */ + i2c_set_bus_num(0); + i2c_reg_write(0x60, 0x05, 0x55); + + return 0; +} + +int platinum_setup_spi(void) +{ + imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); + imx_iomux_v3_setup_multiple_pads(ecspi2_pads, ARRAY_SIZE(ecspi2_pads)); + + return 0; +} + +int platinum_setup_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); + imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads)); + imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads)); + + return 0; +} + +int platinum_phy_config(struct phy_device *phydev) +{ + /* Use generic infrastructure, no specific setup */ + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} + +int platinum_init_gpio(void) +{ + /* Reset FPGA's */ + gpio_direction_output(GPIO_IP_NCONFIG, 0); + gpio_direction_output(GPIO_HK_NCONFIG, 0); + gpio_direction_output(GPIO_LS_NCONFIG, 0); + udelay(3); + gpio_set_value(GPIO_IP_NCONFIG, 1); + gpio_set_value(GPIO_HK_NCONFIG, 1); + gpio_set_value(GPIO_LS_NCONFIG, 1); + + /* no dmd configuration yet */ + + return 0; +} + +int platinum_init_usb(void) +{ + /* Reset usb hub */ + gpio_direction_output(GPIO_USB_RESET, 0); + udelay(100); + gpio_set_value(GPIO_USB_RESET, 1); + + return 0; +} + +int platinum_init_finished(void) +{ + /* Enable led 0 */ + i2c_set_bus_num(0); + i2c_reg_write(0x60, 0x05, 0x54); + + return 0; +} |