sh: ap325rxa: Moved ap325rxa board to board/renesas

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

6 files changed, 0 insertions, 793 deletions

diff --git a/board/ap325rxa/Makefile b/board/ap325rxa/Makefile
deleted file mode 100644
index 21f3e6e29c0..00000000000
--- a/board/ap325rxa/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#########################################################################
-#
-# Copyright (C) 2008 Renesas Solutions Corp.
-# Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
-#
-# board/ap325rxa/Makefile
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= ap325rxa.o cpld-ap325rxa.o
-SOBJS	:= lowlevel_init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/ap325rxa/ap325rxa.c b/board/ap325rxa/ap325rxa.c
deleted file mode 100644
index 9f1112a4360..00000000000
--- a/board/ap325rxa/ap325rxa.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-
-/* PRI control register */
-#define PRPRICR5	0xFF800048 /* LMB */
-#define PRPRICR5_D	0x2a
-
-/* FPGA control */
-#define FPGA_NAND_CTL	0xB410020C
-#define FPGA_NAND_RST	0x0008
-#define FPGA_NAND_INIT	0x0000
-#define FPGA_NAND_RST_WAIT	10000
-
-/* I/O port data */
-#define PACR_D	0x0000
-#define PBCR_D	0x0000
-#define PCCR_D	0x1000
-#define PDCR_D	0x0000
-#define PECR_D	0x0410
-#define PFCR_D	0xffff
-#define PGCR_D	0x0000
-#define PHCR_D	0x5011
-#define PJCR_D	0x4400
-#define PKCR_D	0x7c00
-#define PLCR_D	0x0000
-#define PMCR_D	0x0000
-#define PNCR_D	0x0000
-#define PQCR_D	0x0000
-#define PRCR_D	0x0000
-#define PSCR_D	0x0000
-#define PTCR_D	0x0010
-#define PUCR_D	0x0fff
-#define PVCR_D	0xffff
-#define PWCR_D	0x0000
-#define PXCR_D	0x7500
-#define PYCR_D	0x0000
-#define PZCR_D	0x5540
-
-/* Pin Function Controler data */
-#define PSELA_D	0x1410
-#define PSELB_D	0x0140
-#define PSELC_D	0x0000
-#define PSELD_D	0x0400
-
-/* I/O Buffer Hi-Z data */
-#define	HIZCRA_D	0x0000
-#define HIZCRB_D	0x1000
-#define HIZCRC_D	0x0000
-#define HIZCRD_D	0x0000
-
-/* Module select reg data */
-#define MSELCRA_D	0x0014
-#define MSELCRB_D	0x0018
-
-/* Module Stop reg Data */
-#define MSTPCR2_D	0xFFD9F280
-
-/* CPLD loader */
-extern void init_cpld(void);
-
-int checkboard(void)
-{
-	puts("BOARD: AP325RXA\n");
-	return 0;
-}
-
-int board_init(void)
-{
-	/* Pin Function Controler Init */
-	outw(PSELA_D, PSELA);
-	outw(PSELB_D, PSELB);
-	outw(PSELC_D, PSELC);
-	outw(PSELD_D, PSELD);
-
-	/* I/O Buffer Hi-Z Init */
-	outw(HIZCRA_D, HIZCRA);
-	outw(HIZCRB_D, HIZCRB);
-	outw(HIZCRC_D, HIZCRC);
-	outw(HIZCRD_D, HIZCRD);
-
-	/* Module select reg Init */
-	outw(MSELCRA_D, MSELCRA);
-	outw(MSELCRB_D, MSELCRB);
-
-	/* Module Stop reg Init */
-	outl(MSTPCR2_D, MSTPCR2);
-
-	/* I/O ports */
-	outw(PACR_D, PACR);
-	outw(PBCR_D, PBCR);
-	outw(PCCR_D, PCCR);
-	outw(PDCR_D, PDCR);
-	outw(PECR_D, PECR);
-	outw(PFCR_D, PFCR);
-	outw(PGCR_D, PGCR);
-	outw(PHCR_D, PHCR);
-	outw(PJCR_D, PJCR);
-	outw(PKCR_D, PKCR);
-	outw(PLCR_D, PLCR);
-	outw(PMCR_D, PMCR);
-	outw(PNCR_D, PNCR);
-	outw(PQCR_D, PQCR);
-	outw(PRCR_D, PRCR);
-	outw(PSCR_D, PSCR);
-	outw(PTCR_D, PTCR);
-	outw(PUCR_D, PUCR);
-	outw(PVCR_D, PVCR);
-	outw(PWCR_D, PWCR);
-	outw(PXCR_D, PXCR);
-	outw(PYCR_D, PYCR);
-	outw(PZCR_D, PZCR);
-
-	/* PRI control register Init */
-	outl(PRPRICR5_D, PRPRICR5);
-
-	/* cpld init */
-	init_cpld();
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	DECLARE_GLOBAL_DATA_PTR;
-
-	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
-	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
-	printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
-	return 0;
-}
-
-void led_set_state(unsigned short value)
-{
-}
-
-void ide_set_reset(int idereset)
-{
-	outw(FPGA_NAND_RST, FPGA_NAND_CTL);	/* NAND RESET */
-	udelay(FPGA_NAND_RST_WAIT);
-	outw(FPGA_NAND_INIT, FPGA_NAND_CTL);
-}
diff --git a/board/ap325rxa/config.mk b/board/ap325rxa/config.mk
deleted file mode 100644
index b52a5e5cb63..00000000000
--- a/board/ap325rxa/config.mk
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Copyright (C) 2007
-# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-
-#
-# TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-
-TEXT_BASE = 0x8FFC0000
diff --git a/board/ap325rxa/cpld-ap325rxa.c b/board/ap325rxa/cpld-ap325rxa.c
deleted file mode 100644
index 16fadcbca78..00000000000
--- a/board/ap325rxa/cpld-ap325rxa.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/***************************************************************
- * Project:
- *	  CPLD SlaveSerial Configuration via embedded microprocessor.
- *
- * Copyright info:
- *
- *	  This is free software; you can redistribute it and/or modify
- *	  it as you like.
- *
- *	  This program is distributed in the hope that it will be useful,
- *	  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Description:
- *
- *      This is the main source file that will allow a microprocessor
- *      to configure Xilinx Virtex, Virtex-E, Virtex-EM, Virtex-II,
- *      and Spartan-II devices via the SlaveSerial Configuration Mode.
- *      This code is discussed in Xilinx Application Note, XAPP502.
- *
- * History:
- *	  3-October-2001  MN/MP  - Created
- *	  20-August-2008  Renesas Solutions - Modified to SH7723
- ****************************************************************/
-
-#include <common.h>
-
-/* Serial */
-#define SCIF_BASE 0xffe00000 /* SCIF0 */
-#define SCSMR	(vu_short *)(SCIF_BASE + 0x00)
-#define SCBRR	(vu_char *)(SCIF_BASE + 0x04)
-#define SCSCR	(vu_short *)(SCIF_BASE + 0x08)
-#define SC_TDR	(vu_char *)(SCIF_BASE + 0x0C)
-#define SC_SR	(vu_short *)(SCIF_BASE + 0x10)
-#define SCFCR	(vu_short *)(SCIF_BASE + 0x18)
-#define	RFCR	(vu_long *)0xFE400020
-
-#define SCSCR_INIT		0x0038
-#define SCSCR_CLR		0x0000
-#define SCFCR_INIT		0x0006
-#define SCSMR_INIT		0x0080
-#define RFCR_CLR		0xA400
-#define SCI_TD_E		0x0020
-#define SCI_TDRE_CLEAR	0x00df
-
-#define BPS_SETTING_VALUE	1 /* 12.5MHz */
-#define WAIT_RFCR_COUNTER	500
-
-/* CPLD data size */
-#define CPLD_DATA_SIZE	169216
-
-/* out */
-#define CPLD_PFC_ADR	((vu_short *)0xA4050112)
-
-#define CPLD_PROG_ADR	((vu_char *)0xA4050132)
-#define CPLD_PROG_DAT	0x80
-
-/* in */
-#define CPLD_INIT_ADR	((vu_char *)0xA4050132)
-#define CPLD_INIT_DAT	0x40
-#define CPLD_DONE_ADR	((vu_char *)0xA4050132)
-#define CPLD_DONE_DAT	0x20
-
-#define	HIZCRB			((vu_short *)0xA405015A)
-
-/* data */
-#define CPLD_NOMAL_START	0xA0A80000
-#define CPLD_SAFE_START		0xA0AC0000
-#define MODE_SW				(vu_char *)0xA405012A
-
-static void init_cpld_loader(void)
-{
-
-	*SCSCR = SCSCR_CLR;
-	*SCFCR = SCFCR_INIT;
-	*SCSMR = SCSMR_INIT;
-
-	*SCBRR = BPS_SETTING_VALUE;
-
-	*RFCR = RFCR_CLR; /* Refresh counter clear */
-
-	while (*RFCR < WAIT_RFCR_COUNTER)
-		;
-
-	*SCFCR = 0x0; /* RTRG=00, TTRG=00 */
-				  /* MCE=0,TFRST=0,RFRST=0,LOOP=0 */
-	*SCSCR = SCSCR_INIT;
-}
-
-static int check_write_ready(void)
-{
-	u16 status = *SC_SR;
-	return status & SCI_TD_E;
-}
-
-static void write_cpld_data(char ch)
-{
-	while (!check_write_ready())
-		;
-
-	*SC_TDR = ch;
-	*SC_SR;
-	*SC_SR = SCI_TDRE_CLEAR;
-}
-
-static int delay(void)
-{
-	int i;
-	int c = 0;
-	for (i = 0; i < 200; i++) {
-		c = *(volatile int *)0xa0000000;
-	}
-	return c;
-}
-
-/***********************************************************************
- *
- * Function:     slave_serial
- *
- * Description:  Initiates SlaveSerial Configuration.
- *               Calls ShiftDataOut() to output serial data
- *
- ***********************************************************************/
-static void slave_serial(void)
-{
-	int i;
-	unsigned char *flash;
-
-	*CPLD_PROG_ADR |= CPLD_PROG_DAT; /* PROGRAM_OE HIGH */
-	delay();
-
-	/*
-	 * Toggle Program Pin by Toggling Program_OE bit
-	 * This is accomplished by writing to the Program Register in the CPLD
-	 *
-	 * NOTE: The Program_OE bit should be driven high to bring the Virtex
-	 *      Program Pin low. Likewise, it should be driven low
-	 *      to bring the Virtex Program Pin to High-Z
-	 */
-
-	*CPLD_PROG_ADR &= ~CPLD_PROG_DAT; /* PROGRAM_OE LOW */
-	delay();
-
-	/*
-	 * Bring Program High-Z
-	 * (Drive Program_OE bit low to bring Virtex Program Pin to High-Z
-	 */
-
-	/* Program_OE bit Low brings the Virtex Program Pin to High Z: */
-	*CPLD_PROG_ADR |= CPLD_PROG_DAT; /* PROGRAM_OE HIGH */
-
-	while ((*CPLD_INIT_ADR & CPLD_INIT_DAT) == 0)
-		delay();
-
-	/* Begin Slave-Serial Configuration */
-	flash = (unsigned char *)CPLD_NOMAL_START;
-
-	for (i = 0; i < CPLD_DATA_SIZE; i++)
-		write_cpld_data(*flash++);
-}
-
-/***********************************************************************
- *
- * Function: check_done_bit
- *
- * Description: This function takes monitors the CPLD Input Register
- * 		   by checking the status of the DONE bit in that Register.
- *               By doing so, it monitors the Xilinx Virtex device's DONE
- *               Pin to see if configuration bitstream has been properly
- *               loaded
- *
- ***********************************************************************/
-static void check_done_bit(void)
-{
-	while (!(*CPLD_DONE_ADR & CPLD_DONE_DAT))
-		;
-}
-
-/***********************************************************************
- *
- * Function: init_cpld
- *
- * Description: Begins Slave Serial configuration of Xilinx FPGA
- *
- ***********************************************************************/
-void init_cpld(void)
-{
-	/* Init serial device */
-	init_cpld_loader();
-
-	if (*CPLD_DONE_ADR & CPLD_DONE_DAT)	/* Already DONE */
-		return;
-
-	*HIZCRB = 0x0000;
-	*CPLD_PFC_ADR = 0x7c00;			/* FPGA PROG = OUTPUT */
-
-	/* write CPLD data from NOR flash to device */
-	slave_serial();
-
-	/*
-	 * Monitor the DONE bit in the CPLD Input Register to see if
-	 * configuration successful
-	 */
-
-	check_done_bit();
-}
diff --git a/board/ap325rxa/lowlevel_init.S b/board/ap325rxa/lowlevel_init.S
deleted file mode 100644
index 4f6658879c1..00000000000
--- a/board/ap325rxa/lowlevel_init.S
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- *
- * board/ap325rxa/lowlevel_init.S
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/processor.h>
-
-/*
- * Board specific low level init code, called _very_ early in the
- * startup sequence. Relocation to SDRAM has not happened yet, no
- * stack is available, bss section has not been initialised, etc.
- *
- * (Note: As no stack is available, no subroutines can be called...).
- */
-
-	.global	lowlevel_init
-
-	.text
-	.align	2
-
-lowlevel_init:
-	mov.l	DRVCRA_A, r1
-	mov.l 	DRVCRA_D, r0
-	mov.w	r0, @r1
-
-	mov.l	DRVCRB_A, r1
-	mov.l 	DRVCRB_D, r0
-	mov.w	r0, @r1
-
-	mov.l	RWTCSR_A, r1
-	mov.l 	RWTCSR_D1, r0
-	mov.w	r0, @r1
-
-	mov.l	RWTCNT_A, r1
-	mov.l 	RWTCNT_D, r0
-	mov.w	r0, @r1
-
-	mov.l	RWTCSR_A, r1
-	mov.l 	RWTCSR_D2, r0
-	mov.w	r0, @r1
-
-	mov.l	FRQCR_A, r1
-	mov.l 	FRQCR_D, r0
-	mov.l	r0, @r1
-
-	mov.l	CMNCR_A, r1
-	mov.l	CMNCR_D, r0
-	mov.l	r0, @r1
-
-	mov.l	CS0BCR_A ,r1
-	mov.l	CS0BCR_D ,r0
-	mov.l	r0, @r1
-
-	mov.l	CS4BCR_A ,r1
-	mov.l	CS4BCR_D ,r0
-	mov.l	r0, @r1
-
-	mov.l	CS5ABCR_A ,r1
-	mov.l	CS5ABCR_D ,r0
-	mov.l	r0, @r1
-
-	mov.l	CS5BBCR_A ,r1
-	mov.l	CS5BBCR_D ,r0
-	mov.l	r0, @r1
-
-	mov.l	CS6ABCR_A ,r1
-	mov.l	CS6ABCR_D ,r0
-	mov.l	r0, @r1
-
-	mov.l	CS6BBCR_A ,r1
-	mov.l	CS6BBCR_D ,r0
-	mov.l	r0, @r1
-
-	mov.l	CS0WCR_A ,r1
-	mov.l	CS0WCR_D ,r0
-	mov.l	r0, @r1
-
-	mov.l	CS4WCR_A ,r1
-	mov.l	CS4WCR_D ,r0
-	mov.l	r0, @r1
-
-	mov.l	CS5AWCR_A ,r1
-	mov.l	CS5AWCR_D ,r0
-	mov.l	r0, @r1
-
-	mov.l	CS5BWCR_A ,r1
-	mov.l	CS5BWCR_D ,r0
-	mov.l	r0, @r1
-
-	mov.l	CS6AWCR_A ,r1
-	mov.l	CS6AWCR_D ,r0
-	mov.l	r0, @r1
-
-	mov.l	CS6BWCR_A ,r1
-	mov.l	CS6BWCR_D ,r0
-	mov.l	r0, @r1
-
-	mov.l	SBSC_SDCR_A, r1
-	mov.l 	SBSC_SDCR_D1, r0
-	mov.l	r0, @r1
-
-	mov.l	SBSC_SDWCR_A, r1
-	mov.l 	SBSC_SDWCR_D, r0
-	mov.l	r0, @r1
-
-	mov.l	SBSC_SDPCR_A, r1
-	mov.l 	SBSC_SDPCR_D, r0
-	mov.l	r0, @r1
-
-	mov.l	SBSC_RTCSR_A, r1
-	mov.l 	SBSC_RTCSR_D, r0
-	mov.l	r0, @r1
-
-	mov.l	SBSC_RTCNT_A, r1
-	mov.l 	SBSC_RTCNT_D, r0
-	mov.l	r0, @r1
-
-	mov.l	SBSC_RTCOR_A, r1
-	mov.l 	SBSC_RTCOR_D, r0
-	mov.l	r0, @r1
-
-	mov.l	SBSC_SDMR3_A1, r1
-	mov.l 	SBSC_SDMR3_D, r0
-	mov.b	r0, @r1
-
-	mov.l	SBSC_SDMR3_A2, r1
-	mov.l 	SBSC_SDMR3_D, r0
-	mov.b	r0, @r1
-
-	mov.l	SLEEP_CNT, r1
-2:	tst	r1, r1
-	nop
-	bf/s	2b
-	dt	r1
-
-	mov.l	SBSC_SDMR3_A3, r1
-	mov.l 	SBSC_SDMR3_D, r0
-	mov.b	r0, @r1
-
-	mov.l	SBSC_SDCR_A, r1
-	mov.l 	SBSC_SDCR_D2, r0
-	mov.l	r0, @r1
-
-	mov.l	CCR_A, r1
-	mov.l 	CCR_D, r0
-	mov.l	r0, @r1
-
-	! BL bit off (init = ON)  (?!?)
-
-	stc	sr, r0				! BL bit off(init=ON)
-	mov.l	SR_MASK_D, r1
-	and	r1, r0
-	ldc	r0, sr
-
-	rts
-	 mov	#0, r0
-
-	.align	2
-
-DRVCRA_A:	.long	DRVCRA
-DRVCRB_A:	.long	DRVCRB
-DRVCRA_D:	.long	0x4555
-DRVCRB_D:	.long	0x0005
-
-RWTCSR_A:	.long	RWTCSR
-RWTCNT_A:	.long	RWTCNT
-FRQCR_A:	.long	FRQCR
-RWTCSR_D1:	.long	0xa507
-RWTCSR_D2:	.long	0xa504
-RWTCNT_D:	.long	0x5a00
-FRQCR_D:	.long	0x0b04474a
-
-SBSC_SDCR_A:	.long	SBSC_SDCR
-SBSC_SDWCR_A:	.long	SBSC_SDWCR
-SBSC_SDPCR_A:	.long	SBSC_SDPCR
-SBSC_RTCSR_A:	.long	SBSC_RTCSR
-SBSC_RTCNT_A:	.long	SBSC_RTCNT
-SBSC_RTCOR_A:	.long	SBSC_RTCOR
-SBSC_SDMR3_A1:	.long	0xfe510000
-SBSC_SDMR3_A2:	.long	0xfe500242
-SBSC_SDMR3_A3:	.long	0xfe5c0042
-
-SBSC_SDCR_D1:	.long	0x92810112
-SBSC_SDCR_D2:	.long	0x92810912
-SBSC_SDWCR_D:	.long	0x05162482
-SBSC_SDPCR_D:	.long	0x00300087
-SBSC_RTCSR_D:	.long	0xa55a0212
-SBSC_RTCNT_D:	.long	0xa55a0000
-SBSC_RTCOR_D:	.long	0xa55a0040
-SBSC_SDMR3_D:	.long	0x00
-
-CMNCR_A:	.long	CMNCR
-CS0BCR_A:	.long	CS0BCR
-CS4BCR_A:	.long	CS4BCR
-CS5ABCR_A:	.long 	CS5ABCR
-CS5BBCR_A:	.long	CS5BBCR
-CS6ABCR_A:	.long	CS6ABCR
-CS6BBCR_A:	.long	CS6BBCR
-CS0WCR_A:	.long	CS0WCR
-CS4WCR_A:	.long	CS4WCR
-CS5AWCR_A:	.long	CS5AWCR
-CS5BWCR_A:	.long	CS5BWCR
-CS6AWCR_A:	.long	CS6AWCR
-CS6BWCR_A:	.long	CS6BWCR
-
-CMNCR_D:	.long	0x00000013
-CS0BCR_D:	.long	0x24920400
-CS4BCR_D:	.long	0x24920400
-CS5ABCR_D:	.long	0x24920400
-CS5BBCR_D:	.long	0x7fff0600
-CS6ABCR_D:	.long	0x24920400
-CS6BBCR_D:	.long	0x24920600
-CS0WCR_D:	.long	0x00000480
-CS4WCR_D:	.long	0x00000480
-CS5AWCR_D:	.long	0x00000380
-CS5BWCR_D:	.long	0x00000600
-CS6AWCR_D:	.long	0x00000300
-CS6BWCR_D:	.long	0x00000540
-
-CCR_A:		.long	0xff00001c
-CCR_D:		.long	0x0000090d
-
-SLEEP_CNT:	.long	0x00000800
-SR_MASK_D:	.long	0xEFFFFF0F
diff --git a/board/ap325rxa/u-boot.lds b/board/ap325rxa/u-boot.lds
deleted file mode 100644
index e9f8dc0def6..00000000000
--- a/board/ap325rxa/u-boot.lds
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyrigth (c) 2007
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-SECTIONS
-{
-	/*
-	   Base address of internal SDRAM is 0x88000000.
-	   Although size of SDRAM can be either 16 or 32 MBytes,
-	   we assume 16 MBytes (ie ignore upper half if the full
-	   32 MBytes is present).
-
-	   NOTE: This address must match with the definition of
-	   TEXT_BASE in config.mk (in this directory).
-
-	*/
-	. = 0x88000000 + (128*1024*1024) - (256*1024);
-
-	PROVIDE (reloc_dst = .);
-
-	PROVIDE (_ftext = .);
-	PROVIDE (_fcode = .);
-	PROVIDE (_start = .);
-
-	.text :
-	{
-		cpu/sh4/start.o		(.text)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenv)
-		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenvr)
-		. = ALIGN(8192);
-		*(.text)
-		. = ALIGN(4);
-	} =0xFF
-	PROVIDE (_ecode = .);
-	.rodata :
-	{
-		*(.rodata)
-		. = ALIGN(4);
-	}
-	PROVIDE (_etext = .);
-
-
-	PROVIDE (_fdata = .);
-	.data :
-	{
-		*(.data)
-		. = ALIGN(4);
-	}
-	PROVIDE (_edata = .);
-
-	PROVIDE (_fgot = .);
-	.got :
-	{
-		*(.got)
-		. = ALIGN(4);
-	}
-	PROVIDE (_egot = .);
-
-	PROVIDE (__u_boot_cmd_start = .);
-	.u_boot_cmd :
-	{
-		*(.u_boot_cmd)
-		. = ALIGN(4);
-	}
-	PROVIDE (__u_boot_cmd_end = .);
-
-	PROVIDE (reloc_dst_end = .);
-	/* _reloc_dst_end = .; */
-
-	PROVIDE (bss_start = .);
-	PROVIDE (__bss_start = .);
-	.bss :
-	{
-		*(.bss)
-		. = ALIGN(4);
-	}
-	PROVIDE (bss_end = .);
-
-	PROVIDE (_end = .);
-}