diff options
author | Wolfgang Denk <wd@pollux.denx.de> | 2007-01-30 17:32:15 +0100 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2007-01-30 17:32:15 +0100 |
commit | c105f4c6601b49637c5413afcf65f814d86f8748 (patch) | |
tree | 74d162881710a7c6b4954d2a38dc4b24850c213a /board/amcc | |
parent | d526de33d849b28d4416445fe16af678336d5cb1 (diff) | |
parent | e802594b6fa1b166308820c276b96dc0d7cc731c (diff) |
Merge with /home/sr/git/u-boot/denx-merge-sr
Diffstat (limited to 'board/amcc')
-rw-r--r-- | board/amcc/yellowstone/Makefile | 51 | ||||
-rw-r--r-- | board/amcc/yellowstone/config.mk | 44 | ||||
-rw-r--r-- | board/amcc/yellowstone/init.S | 112 | ||||
-rw-r--r-- | board/amcc/yellowstone/u-boot.lds | 157 | ||||
-rw-r--r-- | board/amcc/yellowstone/yellowstone.c | 549 | ||||
-rw-r--r-- | board/amcc/yosemite/yosemite.c | 8 |
6 files changed, 8 insertions, 913 deletions
diff --git a/board/amcc/yellowstone/Makefile b/board/amcc/yellowstone/Makefile deleted file mode 100644 index 261e5d49cca..00000000000 --- a/board/amcc/yellowstone/Makefile +++ /dev/null @@ -1,51 +0,0 @@ -# -# (C) Copyright 2002-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS = $(BOARD).o -SOBJS = init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/amcc/yellowstone/config.mk b/board/amcc/yellowstone/config.mk deleted file mode 100644 index 4ab0ea0084f..00000000000 --- a/board/amcc/yellowstone/config.mk +++ /dev/null @@ -1,44 +0,0 @@ -# -# (C) Copyright 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# esd ADCIOP boards -# - -#TEXT_BASE = 0x00001000 - -ifeq ($(ramsym),1) -TEXT_BASE = 0xFBD00000 -else -TEXT_BASE = 0xFFF80000 -endif - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 -endif diff --git a/board/amcc/yellowstone/init.S b/board/amcc/yellowstone/init.S deleted file mode 100644 index 425ad0868f8..00000000000 --- a/board/amcc/yellowstone/init.S +++ /dev/null @@ -1,112 +0,0 @@ -/* -* -* See file CREDITS for list of people who contributed to this -* project. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License as -* published by the Free Software Foundation; either version 2 of -* the License, or (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, -* MA 02111-1307 USA -*/ - -#include <ppc_asm.tmpl> -#include <config.h> - -/* General */ -#define TLB_VALID 0x00000200 - -/* Supported page sizes */ - -#define SZ_1K 0x00000000 -#define SZ_4K 0x00000010 -#define SZ_16K 0x00000020 -#define SZ_64K 0x00000030 -#define SZ_256K 0x00000040 -#define SZ_1M 0x00000050 -#define SZ_8M 0x00000060 -#define SZ_16M 0x00000070 -#define SZ_256M 0x00000090 - -/* Storage attributes */ -#define SA_W 0x00000800 /* Write-through */ -#define SA_I 0x00000400 /* Caching inhibited */ -#define SA_M 0x00000200 /* Memory coherence */ -#define SA_G 0x00000100 /* Guarded */ -#define SA_E 0x00000080 /* Endian */ - -/* Access control */ -#define AC_X 0x00000024 /* Execute */ -#define AC_W 0x00000012 /* Write */ -#define AC_R 0x00000009 /* Read */ - -/* Some handy macros */ - -#define EPN(e) ((e) & 0xfffffc00) -#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) ) -#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) ) -#define TLB2(a) ( (a)&0x00000fbf ) - -#define tlbtab_start\ - mflr r1 ;\ - bl 0f ; - -#define tlbtab_end\ - .long 0, 0, 0 ; \ -0: mflr r0 ; \ - mtlr r1 ; \ - blr ; - -#define tlbentry(epn,sz,rpn,erpn,attr)\ - .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr) - - -/************************************************************************** - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - *************************************************************************/ - - .section .bootpg,"ax" - .globl tlbtab - -tlbtab: - tlbtab_start - - /* - * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the - * speed up boot process. It is patched after relocation to enable SA_I - */ - tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/) - - /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G ) - - tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) - tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I ) - - /* PCI */ - tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I ) - - /* USB 2.0 Device */ - tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I ) - - tlbtab_end diff --git a/board/amcc/yellowstone/u-boot.lds b/board/amcc/yellowstone/u-boot.lds deleted file mode 100644 index a0ba44de889..00000000000 --- a/board/amcc/yellowstone/u-boot.lds +++ /dev/null @@ -1,157 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/yellowstone/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/serial.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ -/* common/environment.o(.text)*/ - - *(.text) - *(.fixup) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c deleted file mode 100644 index 04f58e04191..00000000000 --- a/board/amcc/yellowstone/yellowstone.c +++ /dev/null @@ -1,549 +0,0 @@ -/* - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <ppc4xx.h> -#include <asm/processor.h> -#include <spd_sdram.h> - -DECLARE_GLOBAL_DATA_PTR; - -extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -int board_early_init_f(void) -{ - register uint reg; - - /*-------------------------------------------------------------------- - * Setup the external bus controller/chip selects - *-------------------------------------------------------------------*/ - mtdcr(ebccfga, xbcfg); - reg = mfdcr(ebccfgd); - mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */ - - /*-------------------------------------------------------------------- - * Setup the GPIO pins - *-------------------------------------------------------------------*/ - /*CPLD cs */ - /*setup Address lines for flash size 64Meg. */ - out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x50010000); - out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x50010000); - out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x50000000); - - /*setup emac */ - out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080); - out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40); - out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55); - out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000); - out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000); - - /*UART1 */ - out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x02000000); - out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x00080000); - out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x00010000); - - /* external interrupts IRQ0...3 */ - out32(GPIO1_TCR, in32(GPIO1_TCR) & ~0x00f00000); - out32(GPIO1_TSRL, in32(GPIO1_TSRL) & ~0x0000ff00); - out32(GPIO1_ISR1L, in32(GPIO1_ISR1L) | 0x00005500); - -#if 0 /* test-only */ - /*setup USB 2.0 */ - out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000); - out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000); - out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf); - out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa); - out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500); -#endif - - /*-------------------------------------------------------------------- - * Setup the interrupt controller polarities, triggers, etc. - *-------------------------------------------------------------------*/ - mtdcr(uic0sr, 0xffffffff); /* clear all */ - mtdcr(uic0er, 0x00000000); /* disable all */ - mtdcr(uic0cr, 0x00000009); /* ATI & UIC1 crit are critical */ - mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */ - mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */ - mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ - - mtdcr(uic1sr, 0xffffffff); /* clear all */ - mtdcr(uic1er, 0x00000000); /* disable all */ - mtdcr(uic1cr, 0x00000000); /* all non-critical */ - mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */ - mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */ - mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ - - /*-------------------------------------------------------------------- - * Setup other serial configuration - *-------------------------------------------------------------------*/ - mfsdr(sdr_pci0, reg); - mtsdr(sdr_pci0, 0x80000000 | reg); /* PCI arbiter enabled */ - mtsdr(sdr_pfc0, 0x00003e00); /* Pin function */ - mtsdr(sdr_pfc1, 0x00048000); /* Pin function: UART0 has 4 pins */ - - /*clear tmrclk divisor */ - *(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00; - - /*enable ethernet */ - *(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0; - -#if 0 /* test-only */ - /*enable usb 1.1 fs device and remove usb 2.0 reset */ - *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00; -#endif - - /*get rid of flash write protect */ - *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00; - - return 0; -} - -int misc_init_r (void) -{ - uint pbcr; - int size_val = 0; - - /* Re-do sizing to get full correct info */ - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - switch (gd->bd->bi_flashsize) { - case 1 << 20: - size_val = 0; - break; - case 2 << 20: - size_val = 1; - break; - case 4 << 20: - size_val = 2; - break; - case 8 << 20: - size_val = 3; - break; - case 16 << 20: - size_val = 4; - break; - case 32 << 20: - size_val = 5; - break; - case 64 << 20: - size_val = 6; - break; - case 128 << 20: - size_val = 7; - break; - } - pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); - mtdcr(ebccfga, pb0cr); - mtdcr(ebccfgd, pbcr); - - /* adjust flash start and offset */ - gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; - gd->bd->bi_flashoffset = 0; - - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - -CFG_MONITOR_LEN, - 0xffffffff, - &flash_info[0]); - - return 0; -} - -int checkboard(void) -{ - char *s = getenv("serial#"); - u8 rev; - u8 val; - - printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board"); - - rev = *(u8 *)(CFG_CPLD + 0); - val = *(u8 *)(CFG_CPLD + 5) & 0x01; - printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33); - - if (s != NULL) { - puts(", serial# "); - puts(s); - } - putc('\n'); - - return (0); -} - -/************************************************************************* - * sdram_init -- doesn't use serial presence detect. - * - * Assumes: 256 MB, ECC, non-registered - * PLB @ 133 MHz - * - ************************************************************************/ -#define NUM_TRIES 64 -#define NUM_READS 10 - -void sdram_tr1_set(int ram_address, int* tr1_value) -{ - int i; - int j, k; - volatile unsigned int* ram_pointer = (unsigned int*)ram_address; - int first_good = -1, last_bad = 0x1ff; - - unsigned long test[NUM_TRIES] = { - 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, - 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, - 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, - 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, - 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, - 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, - 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, - 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, - 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, - 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, - 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, - 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, - 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, - 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, - 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, - 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 }; - - /* go through all possible SDRAM0_TR1[RDCT] values */ - for (i=0; i<=0x1ff; i++) { - /* set the current value for TR1 */ - mtsdram(mem_tr1, (0x80800800 | i)); - - /* write values */ - for (j=0; j<NUM_TRIES; j++) { - ram_pointer[j] = test[j]; - - /* clear any cache at ram location */ - __asm__("dcbf 0,%0": :"r" (&ram_pointer[j])); - } - - /* read values back */ - for (j=0; j<NUM_TRIES; j++) { - for (k=0; k<NUM_READS; k++) { - /* clear any cache at ram location */ - __asm__("dcbf 0,%0": :"r" (&ram_pointer[j])); - - if (ram_pointer[j] != test[j]) - break; - } - - /* read error */ - if (k != NUM_READS) { - break; - } - } - - /* we have a SDRAM0_TR1[RDCT] that is part of the window */ - if (j == NUM_TRIES) { - if (first_good == -1) - first_good = i; /* found beginning of window */ - } else { /* bad read */ - /* if we have not had a good read then don't care */ - if(first_good != -1) { - /* first failure after a good read */ - last_bad = i-1; - break; - } - } - } - - /* return the current value for TR1 */ - *tr1_value = (first_good + last_bad) / 2; -} - -void sdram_init(void) -{ - register uint reg; - int tr1_bank1, tr1_bank2; - - /*-------------------------------------------------------------------- - * Setup some default - *------------------------------------------------------------------*/ - mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */ - mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ - mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */ - mtsdram(mem_clktr, 0x40000000); /* ?? */ - mtsdram(mem_wddctr, 0x40000000); /* ?? */ - - /*clear this first, if the DDR is enabled by a debugger - then you can not make changes. */ - mtsdram(mem_cfg0, 0x00000000); /* Disable EEC */ - - /*-------------------------------------------------------------------- - * Setup for board-specific specific mem - *------------------------------------------------------------------*/ - /* - * Following for CAS Latency = 2.5 @ 133 MHz PLB - */ - mtsdram(mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */ - mtsdram(mem_b1cr, 0x080a4001); /* SDBA=0x080 128MB, Mode 3, enabled */ - - mtsdram(mem_tr0, 0x410a4012); /* ?? */ - mtsdram(mem_rtr, 0x04080000); /* ?? */ - mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */ - mtsdram(mem_cfg0, 0x30000000); /* Disable EEC */ - udelay(400); /* Delay 200 usecs (min) */ - - /*-------------------------------------------------------------------- - * Enable the controller, then wait for DCEN to complete - *------------------------------------------------------------------*/ - mtsdram(mem_cfg0, 0x80000000); /* Enable */ - - for (;;) { - mfsdram(mem_mcsts, reg); - if (reg & 0x80000000) - break; - } - - sdram_tr1_set(0x00000000, &tr1_bank1); - sdram_tr1_set(0x08000000, &tr1_bank2); - mtsdram(mem_tr1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800) ); -} - -/************************************************************************* - * long int initdram - * - ************************************************************************/ -long int initdram(int board) -{ - sdram_init(); - return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024); /* return bytes */ -} - -#if defined(CFG_DRAM_TEST) -int testdram(void) -{ - unsigned long *mem = (unsigned long *)0; - const unsigned long kend = (1024 / sizeof(unsigned long)); - unsigned long k, n; - - mtmsr(0); - - for (k = 0; k < CFG_KBYTES_SDRAM; - ++k, mem += (1024 / sizeof(unsigned long))) { - if ((k & 1023) == 0) { - printf("%3d MB\r", k / 1024); - } - - memset(mem, 0xaaaaaaaa, 1024); - for (n = 0; n < kend; ++n) { - if (mem[n] != 0xaaaaaaaa) { - printf("SDRAM test fails at: %08x\n", - (uint) & mem[n]); - return 1; - } - } - - memset(mem, 0x55555555, 1024); - for (n = 0; n < kend; ++n) { - if (mem[n] != 0x55555555) { - printf("SDRAM test fails at: %08x\n", - (uint) & mem[n]); - return 1; - } - } - } - printf("SDRAM test passes\n"); - return 0; -} -#endif - -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long addr; - - /*-------------------------------------------------------------------------+ - | Set priority for all PLB3 devices to 0. - | Set PLB3 arbiter to fair mode. - +-------------------------------------------------------------------------*/ - mfsdr(sdr_amp1, addr); - mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb3_acr); - mtdcr(plb3_acr, addr | 0x80000000); - - /*-------------------------------------------------------------------------+ - | Set priority for all PLB4 devices to 0. - +-------------------------------------------------------------------------*/ - mfsdr(sdr_amp0, addr); - mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ - mtdcr(plb4_acr, addr); - - /*-------------------------------------------------------------------------+ - | Set Nebula PLB4 arbiter to fair mode. - +-------------------------------------------------------------------------*/ - /* Segment0 */ - addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; - addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; - addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; - addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; - mtdcr(plb0_acr, addr); - - /* Segment1 */ - addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair; - addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled; - addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; - addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep; - mtdcr(plb1_acr, addr); - - return 1; -} -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ - -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /*--------------------------------------------------------------------------+ - * Set up Direct MMIO registers - *--------------------------------------------------------------------------*/ - /*--------------------------------------------------------------------------+ - | PowerPC440 EP PCI Master configuration. - | Map one 1Gig range of PLB/processor addresses to PCI memory space. - | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF - | Use byte reversed out routines to handle endianess. - | Make this region non-prefetchable. - +--------------------------------------------------------------------------*/ - out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */ - - /*--------------------------------------------------------------------------+ - * Set up Configuration registers - *--------------------------------------------------------------------------*/ - - /* Program the board's subsystem id/vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CFG_PCI_SUBSYS_VENDORID); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID); - - /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); - - /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); - - /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); - - pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); - -} -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ - -/************************************************************************* - * pci_master_init - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) -void pci_master_init(struct pci_controller *hose) -{ - unsigned short temp_short; - - /*--------------------------------------------------------------------------+ - | Write the PowerPC440 EP PCI Configuration regs. - | Enable PowerPC440 EP to be a master on the PCI bus (PMM). - | Enable PowerPC440 EP to act as a PCI memory target (PTM). - +--------------------------------------------------------------------------*/ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */ - -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* Bamboo is always configured as host. */ - return (1); -} -#endif /* defined(CONFIG_PCI) */ - -/************************************************************************* - * hw_watchdog_reset - * - * This routine is called to reset (keep alive) the watchdog timer - * - ************************************************************************/ -#if defined(CONFIG_HW_WATCHDOG) -void hw_watchdog_reset(void) -{ - -} -#endif - -void board_reset(void) -{ - /* give reset to BCSR */ - *(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09; -} diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index d47219cb6f8..c2e12ba12ea 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -65,12 +65,14 @@ int board_early_init_f(void) out32(GPIO1_TSRL, in32(GPIO1_TSRL) & ~0x0000ff00); out32(GPIO1_ISR1L, in32(GPIO1_ISR1L) | 0x00005500); +#ifdef CONFIG_440EP /*setup USB 2.0 */ out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000); out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000); out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf); out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa); out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500); +#endif /*-------------------------------------------------------------------- * Setup the interrupt controller polarities, triggers, etc. @@ -105,8 +107,10 @@ int board_early_init_f(void) /*enable ethernet */ *(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0; +#ifdef CONFIG_440EP /*enable usb 1.1 fs device and remove usb 2.0 reset */ *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00; +#endif /*get rid of flash write protect */ *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00; @@ -171,7 +175,11 @@ int checkboard(void) u8 rev; u8 val; +#ifdef CONFIG_440EP printf("Board: Yosemite - AMCC PPC440EP Evaluation Board"); +#else + printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board"); +#endif rev = *(u8 *)(CFG_CPLD + 0); val = *(u8 *)(CFG_CPLD + 5) & 0x01; |