diff options
author | Marian Balakowicz <m8@semihalf.com> | 2006-06-30 16:30:46 +0200 |
---|---|---|
committer | Marian Balakowicz <m8@semihalf.com> | 2006-06-30 16:30:46 +0200 |
commit | 6c5879f380be38d85fef0d3aba3353358f4b2ff4 (patch) | |
tree | 32b48cff57dafc910c7b0dfdd6c5b99109c21e46 /board/amcc/yucca/yucca.c | |
parent | bb105f24cc90ec4c56ea13012acc3d763b2a2984 (diff) |
Add support for AMCC 440SPe CPU based eval board (Yucca).
Diffstat (limited to 'board/amcc/yucca/yucca.c')
-rw-r--r-- | board/amcc/yucca/yucca.c | 1100 |
1 files changed, 1100 insertions, 0 deletions
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c new file mode 100644 index 00000000000..8fb4cfa8847 --- /dev/null +++ b/board/amcc/yucca/yucca.c @@ -0,0 +1,1100 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Port to AMCC-440SPE Evaluation Board SOP - April 2005 + */ + +#include <common.h> +#include <ppc4xx.h> +#include <asm/processor.h> +#include <i2c.h> +#include "yucca.h" + +void fpga_init (void); + +void get_sys_info(PPC440_SYS_INFO *board_cfg ); +int compare_to_true(char *str ); +char *remove_l_w_space(char *in_str ); +char *remove_t_w_space(char *in_str ); +int get_console_port(void); +unsigned long ppcMfcpr(unsigned long cpr_reg); +unsigned long ppcMfsdr(unsigned long sdr_reg); + +#define DEBUG_ENV +#ifdef DEBUG_ENV +#define DEBUGF(fmt,args...) printf(fmt ,##args) +#else +#define DEBUGF(fmt,args...) +#endif + +#define FALSE 0 +#define TRUE 1 + +int board_early_init_f (void) +{ +/*----------------------------------------------------------------------------+ +| Define Boot devices ++----------------------------------------------------------------------------*/ +#define BOOT_FROM_SMALL_FLASH 0x00 +#define BOOT_FROM_LARGE_FLASH_OR_SRAM 0x01 +#define BOOT_FROM_PCI 0x02 +#define BOOT_DEVICE_UNKNOWN 0x03 + +/*----------------------------------------------------------------------------+ +| EBC Devices Characteristics +| Peripheral Bank Access Parameters - EBC_BxAP +| Peripheral Bank Configuration Register - EBC_BxCR ++----------------------------------------------------------------------------*/ + +/* + * Small Flash and FRAM + * BU Value + * BxAP : 0x03800000 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000 + * B0CR : 0xff098000 - BAS = ff0 - 100 11 00 0000000000000 + * B2CR : 0xe7098000 - BAS = e70 - 100 11 00 0000000000000 + */ +#define EBC_BXAP_SMALL_FLASH EBC_BXAP_BME_DISABLED | \ + EBC_BXAP_TWT_ENCODE(7) | \ + EBC_BXAP_BCE_DISABLE | \ + EBC_BXAP_BCT_2TRANS | \ + EBC_BXAP_CSN_ENCODE(0) | \ + EBC_BXAP_OEN_ENCODE(0) | \ + EBC_BXAP_WBN_ENCODE(0) | \ + EBC_BXAP_WBF_ENCODE(0) | \ + EBC_BXAP_TH_ENCODE(0) | \ + EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_SOR_DELAYED | \ + EBC_BXAP_BEM_WRITEONLY | \ + EBC_BXAP_PEN_DISABLED + +#define EBC_BXCR_SMALL_FLASH_CS0 EBC_BXCR_BAS_ENCODE(0xFF000000) | \ + EBC_BXCR_BS_16MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_8BIT + +#define EBC_BXCR_SMALL_FLASH_CS2 EBC_BXCR_BAS_ENCODE(0xe7000000) | \ + EBC_BXCR_BS_16MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_8BIT + +/* + * Large Flash and SRAM + * BU Value + * BxAP : 0x048ff240 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000 + * B0CR : 0xff09a000 - BAS = ff0 - 100 11 01 0000000000000 + * B2CR : 0xe709a000 - BAS = e70 - 100 11 01 0000000000000 +*/ +#define EBC_BXAP_LARGE_FLASH EBC_BXAP_BME_DISABLED | \ + EBC_BXAP_TWT_ENCODE(7) | \ + EBC_BXAP_BCE_DISABLE | \ + EBC_BXAP_BCT_2TRANS | \ + EBC_BXAP_CSN_ENCODE(0) | \ + EBC_BXAP_OEN_ENCODE(0) | \ + EBC_BXAP_WBN_ENCODE(0) | \ + EBC_BXAP_WBF_ENCODE(0) | \ + EBC_BXAP_TH_ENCODE(0) | \ + EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_SOR_DELAYED | \ + EBC_BXAP_BEM_WRITEONLY | \ + EBC_BXAP_PEN_DISABLED + +#define EBC_BXCR_LARGE_FLASH_CS0 EBC_BXCR_BAS_ENCODE(0xFF000000) | \ + EBC_BXCR_BS_16MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_16BIT + +#define EBC_BXCR_LARGE_FLASH_CS2 EBC_BXCR_BAS_ENCODE(0xE7000000) | \ + EBC_BXCR_BS_16MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_16BIT + +/* + * FPGA + * BU value : + * B1AP = 0x05895240 - 0 00001011 0 00 10 01 01 01 001 0 0 1 0 00000 + * B1CR = 0xe201a000 - BAS = e20 - 000 11 01 00000000000000 + */ +#define EBC_BXAP_FPGA EBC_BXAP_BME_DISABLED | \ + EBC_BXAP_TWT_ENCODE(11) | \ + EBC_BXAP_BCE_DISABLE | \ + EBC_BXAP_BCT_2TRANS | \ + EBC_BXAP_CSN_ENCODE(10) | \ + EBC_BXAP_OEN_ENCODE(1) | \ + EBC_BXAP_WBN_ENCODE(1) | \ + EBC_BXAP_WBF_ENCODE(1) | \ + EBC_BXAP_TH_ENCODE(1) | \ + EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_SOR_DELAYED | \ + EBC_BXAP_BEM_RW | \ + EBC_BXAP_PEN_DISABLED + +#define EBC_BXCR_FPGA_CS1 EBC_BXCR_BAS_ENCODE(0xe2000000) | \ + EBC_BXCR_BS_1MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_16BIT + + unsigned long mfr; + /* + * Define Variables for EBC initialization depending on BOOTSTRAP option + */ + unsigned long sdr0_pinstp, sdr0_sdstp1 ; + unsigned long bootstrap_settings, ebc_data_width, boot_selection; + int computed_boot_device = BOOT_DEVICE_UNKNOWN; + + /*-------------------------------------------------------------------+ + | Initialize EBC CONFIG - + | Keep the Default value, but the bit PDT which has to be set to 1 ?TBC + | default value : + | 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000 + | + +-------------------------------------------------------------------*/ + mtebc(xbcfg, EBC_CFG_LE_UNLOCK | + EBC_CFG_PTD_ENABLE | + EBC_CFG_RTC_16PERCLK | + EBC_CFG_ATC_PREVIOUS | + EBC_CFG_DTC_PREVIOUS | + EBC_CFG_CTC_PREVIOUS | + EBC_CFG_OEO_PREVIOUS | + EBC_CFG_EMC_DEFAULT | + EBC_CFG_PME_DISABLE | + EBC_CFG_PR_16); + + /*-------------------------------------------------------------------+ + | + | PART 1 : Initialize EBC Bank 1 + | ============================== + | Bank1 is always associated to the EPLD. + | It has to be initialized prior to other banks settings computation + | since some board registers values may be needed to determine the + | boot type + | + +-------------------------------------------------------------------*/ + mtebc(pb1ap, EBC_BXAP_FPGA); + mtebc(pb1cr, EBC_BXCR_FPGA_CS1); + + /*-------------------------------------------------------------------+ + | + | PART 2 : Determine which boot device was selected + | ================================================= + | + | Read Pin Strap Register in PPC440SPe + | Result can either be : + | - Boot strap = boot from EBC 8bits => Small Flash + | - Boot strap = boot from PCI + | - Boot strap = IIC + | In case of boot from IIC, read Serial Device Strap Register1 + | + | Result can either be : + | - Boot from EBC - EBC Bus Width = 8bits => Small Flash + | - Boot from EBC - EBC Bus Width = 16bits => Large Flash or SRAM + | - Boot from PCI + | + +-------------------------------------------------------------------*/ + /* Read Pin Strap Register in PPC440SP */ + sdr0_pinstp = ppcMfsdr(SDR0_PINSTP); + bootstrap_settings = sdr0_pinstp & SDR0_PINSTP_BOOTSTRAP_MASK; + + switch (bootstrap_settings) { + case SDR0_PINSTP_BOOTSTRAP_SETTINGS0: + /* + * Strapping Option A + * Boot from EBC - 8 bits , Small Flash + */ + computed_boot_device = BOOT_FROM_SMALL_FLASH; + break; + case SDR0_PINSTP_BOOTSTRAP_SETTINGS1: + /* + * Strappping Option B + * Boot from PCI + */ + computed_boot_device = BOOT_FROM_PCI; + break; + case SDR0_PINSTP_BOOTSTRAP_IIC_50_EN: + case SDR0_PINSTP_BOOTSTRAP_IIC_54_EN: + /* + * Strapping Option C or D + * Boot Settings in IIC EEprom address 0x50 or 0x54 + * Read Serial Device Strap Register1 in PPC440SPe + */ + sdr0_sdstp1 = ppcMfsdr(SDR0_SDSTP1); + boot_selection = sdr0_sdstp1 & SDR0_SDSTP1_ERPN_MASK; + ebc_data_width = sdr0_sdstp1 & SDR0_SDSTP1_EBCW_MASK; + + switch (boot_selection) { + case SDR0_SDSTP1_ERPN_EBC: + switch (ebc_data_width) { + case SDR0_SDSTP1_EBCW_16_BITS: + computed_boot_device = + BOOT_FROM_LARGE_FLASH_OR_SRAM; + break; + case SDR0_SDSTP1_EBCW_8_BITS : + computed_boot_device = BOOT_FROM_SMALL_FLASH; + break; + } + break; + + case SDR0_SDSTP1_ERPN_PCI: + computed_boot_device = BOOT_FROM_PCI; + break; + default: + /* should not occure */ + computed_boot_device = BOOT_DEVICE_UNKNOWN; + } + break; + default: + /* should not be */ + computed_boot_device = BOOT_DEVICE_UNKNOWN; + break; + } + + /*-------------------------------------------------------------------+ + | + | PART 3 : Compute EBC settings depending on selected boot device + | ====== ====================================================== + | + | Resulting EBC init will be among following configurations : + | + | - Boot from EBC 8bits => boot from Small Flash selected + | EBC-CS0 = Small Flash + | EBC-CS2 = Large Flash and SRAM + | + | - Boot from EBC 16bits => boot from Large Flash or SRAM + | EBC-CS0 = Large Flash or SRAM + | EBC-CS2 = Small Flash + | + | - Boot from PCI + | EBC-CS0 = not initialized to avoid address contention + | EBC-CS2 = same as boot from Small Flash selected + | + +-------------------------------------------------------------------*/ + unsigned long ebc0_cs0_bxap_value = 0, ebc0_cs0_bxcr_value = 0; + unsigned long ebc0_cs2_bxap_value = 0, ebc0_cs2_bxcr_value = 0; + + switch (computed_boot_device) { + /*-------------------------------------------------------------------*/ + case BOOT_FROM_PCI: + /*-------------------------------------------------------------------*/ + /* + * By Default CS2 is affected to LARGE Flash + * do not initialize SMALL FLASH to avoid address contention + * Large Flash + */ + ebc0_cs2_bxap_value = EBC_BXAP_LARGE_FLASH; + ebc0_cs2_bxcr_value = EBC_BXCR_LARGE_FLASH_CS2; + break; + + /*-------------------------------------------------------------------*/ + case BOOT_FROM_SMALL_FLASH: + /*-------------------------------------------------------------------*/ + ebc0_cs0_bxap_value = EBC_BXAP_SMALL_FLASH; + ebc0_cs0_bxcr_value = EBC_BXCR_SMALL_FLASH_CS0; + + /* + * Large Flash or SRAM + */ + /* ebc0_cs2_bxap_value = EBC_BXAP_LARGE_FLASH; */ + ebc0_cs2_bxap_value = 0x048ff240; + ebc0_cs2_bxcr_value = EBC_BXCR_LARGE_FLASH_CS2; + break; + + /*-------------------------------------------------------------------*/ + case BOOT_FROM_LARGE_FLASH_OR_SRAM: + /*-------------------------------------------------------------------*/ + ebc0_cs0_bxap_value = EBC_BXAP_LARGE_FLASH; + ebc0_cs0_bxcr_value = EBC_BXCR_LARGE_FLASH_CS0; + + /* Small flash */ + ebc0_cs2_bxap_value = EBC_BXAP_SMALL_FLASH; + ebc0_cs2_bxcr_value = EBC_BXCR_SMALL_FLASH_CS2; + break; + + /*-------------------------------------------------------------------*/ + default: + /*-------------------------------------------------------------------*/ + /* BOOT_DEVICE_UNKNOWN */ + break; + } + + mtebc(pb0ap, ebc0_cs0_bxap_value); + mtebc(pb0cr, ebc0_cs0_bxcr_value); + mtebc(pb2ap, ebc0_cs2_bxap_value); + mtebc(pb2cr, ebc0_cs2_bxcr_value); + + /*--------------------------------------------------------------------+ + | Interrupt controller setup for the AMCC 440SPe Evaluation board. + +--------------------------------------------------------------------+ + +---------------------------------------------------------------------+ + |Interrupt| Source | Pol. | Sensi.| Crit. | + +---------+-----------------------------------+-------+-------+-------+ + | IRQ 00 | UART0 | High | Level | Non | + | IRQ 01 | UART1 | High | Level | Non | + | IRQ 02 | IIC0 | High | Level | Non | + | IRQ 03 | IIC1 | High | Level | Non | + | IRQ 04 | PCI0X0 MSG IN | High | Level | Non | + | IRQ 05 | PCI0X0 CMD Write | High | Level | Non | + | IRQ 06 | PCI0X0 Power Mgt | High | Level | Non | + | IRQ 07 | PCI0X0 VPD Access | Rising| Edge | Non | + | IRQ 08 | PCI0X0 MSI level 0 | High | Lvl/ed| Non | + | IRQ 09 | External IRQ 15 - (PCI-Express) | pgm H | Pgm | Non | + | IRQ 10 | UIC2 Non-critical Int. | NA | NA | Non | + | IRQ 11 | UIC2 Critical Interrupt | NA | NA | Crit | + | IRQ 12 | PCI Express MSI Level 0 | Rising| Edge | Non | + | IRQ 13 | PCI Express MSI Level 1 | Rising| Edge | Non | + | IRQ 14 | PCI Express MSI Level 2 | Rising| Edge | Non | + | IRQ 15 | PCI Express MSI Level 3 | Rising| Edge | Non | + | IRQ 16 | UIC3 Non-critical Int. | NA | NA | Non | + | IRQ 17 | UIC3 Critical Interrupt | NA | NA | Crit | + | IRQ 18 | External IRQ 14 - (PCI-Express) | Pgm | Pgm | Non | + | IRQ 19 | DMA Channel 0 FIFO Full | High | Level | Non | + | IRQ 20 | DMA Channel 0 Stat FIFO | High | Level | Non | + | IRQ 21 | DMA Channel 1 FIFO Full | High | Level | Non | + | IRQ 22 | DMA Channel 1 Stat FIFO | High | Level | Non | + | IRQ 23 | I2O Inbound Doorbell | High | Level | Non | + | IRQ 24 | Inbound Post List FIFO Not Empt | High | Level | Non | + | IRQ 25 | I2O Region 0 LL PLB Write | High | Level | Non | + | IRQ 26 | I2O Region 1 LL PLB Write | High | Level | Non | + | IRQ 27 | I2O Region 0 HB PLB Write | High | Level | Non | + | IRQ 28 | I2O Region 1 HB PLB Write | High | Level | Non | + | IRQ 29 | GPT Down Count Timer | Rising| Edge | Non | + | IRQ 30 | UIC1 Non-critical Int. | NA | NA | Non | + | IRQ 31 | UIC1 Critical Interrupt | NA | NA | Crit. | + |---------------------------------------------------------------------- + | IRQ 32 | Ext. IRQ 13 - (PCI-Express) |pgm (H)|pgm/Lvl| Non | + | IRQ 33 | MAL Serr | High | Level | Non | + | IRQ 34 | MAL Txde | High | Level | Non | + | IRQ 35 | MAL Rxde | High | Level | Non | + | IRQ 36 | DMC CE or DMC UE | High | Level | Non | + | IRQ 37 | EBC or UART2 | High |Lvl Edg| Non | + | IRQ 38 | MAL TX EOB | High | Level | Non | + | IRQ 39 | MAL RX EOB | High | Level | Non | + | IRQ 40 | PCIX0 MSI Level 1 | High |Lvl Edg| Non | + | IRQ 41 | PCIX0 MSI level 2 | High |Lvl Edg| Non | + | IRQ 42 | PCIX0 MSI level 3 | High |Lvl Edg| Non | + | IRQ 43 | L2 Cache | Risin | Edge | Non | + | IRQ 44 | GPT Compare Timer 0 | Risin | Edge | Non | + | IRQ 45 | GPT Compare Timer 1 | Risin | Edge | Non | + | IRQ 46 | GPT Compare Timer 2 | Risin | Edge | Non | + | IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non | + | IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non | + | IRQ 49 | Ext. IRQ 12 - PCI-X |pgm/Fal|pgm/Lvl| Non | + | IRQ 50 | Ext. IRQ 11 - |pgm (H)|pgm/Lvl| Non | + | IRQ 51 | Ext. IRQ 10 - |pgm (H)|pgm/Lvl| Non | + | IRQ 52 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non | + | IRQ 53 | Ext. IRQ 8 |pgm (H)|pgm/Lvl| Non | + | IRQ 54 | DMA Error | High | Level | Non | + | IRQ 55 | DMA I2O Error | High | Level | Non | + | IRQ 56 | Serial ROM | High | Level | Non | + | IRQ 57 | PCIX0 Error | High | Edge | Non | + | IRQ 58 | Ext. IRQ 7- |pgm (H)|pgm/Lvl| Non | + | IRQ 59 | Ext. IRQ 6- |pgm (H)|pgm/Lvl| Non | + | IRQ 60 | EMAC0 Interrupt | High | Level | Non | + | IRQ 61 | EMAC0 Wake-up | High | Level | Non | + | IRQ 62 | Reserved | High | Level | Non | + | IRQ 63 | XOR | High | Level | Non | + |---------------------------------------------------------------------- + | IRQ 64 | PE0 AL | High | Level | Non | + | IRQ 65 | PE0 VPD Access | Risin | Edge | Non | + | IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non | + | IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non | + | IRQ 68 | PE0 TCR | High | Level | Non | + | IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non | + | IRQ 70 | PE0 DCR Error | High | Level | Non | + | IRQ 71 | Reserved | N/A | N/A | Non | + | IRQ 72 | PE1 AL | High | Level | Non | + | IRQ 73 | PE1 VPD Access | Risin | Edge | Non | + | IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non | + | IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non | + | IRQ 76 | PE1 TCR | High | Level | Non | + | IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non | + | IRQ 78 | PE1 DCR Error | High | Level | Non | + | IRQ 79 | Reserved | N/A | N/A | Non | + | IRQ 80 | PE2 AL | High | Level | Non | + | IRQ 81 | PE2 VPD Access | Risin | Edge | Non | + | IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non | + | IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non | + | IRQ 84 | PE2 TCR | High | Level | Non | + | IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non | + | IRQ 86 | PE2 DCR Error | High | Level | Non | + | IRQ 87 | Reserved | N/A | N/A | Non | + | IRQ 88 | External IRQ(5) | Progr | Progr | Non | + | IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non | + | IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non | + | IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non | + | IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non | + | IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non | + | IRQ 94 | Reserved | N/A | N/A | Non | + | IRQ 95 | Reserved | N/A | N/A | Non | + |--------------------------------------------------------------------- + | IRQ 96 | PE0 INTA | High | Level | Non | + | IRQ 97 | PE0 INTB | High | Level | Non | + | IRQ 98 | PE0 INTC | High | Level | Non | + | IRQ 99 | PE0 INTD | High | Level | Non | + | IRQ 100 | PE1 INTA | High | Level | Non | + | IRQ 101 | PE1 INTB | High | Level | Non | + | IRQ 102 | PE1 INTC | High | Level | Non | + | IRQ 103 | PE1 INTD | High | Level | Non | + | IRQ 104 | PE2 INTA | High | Level | Non | + | IRQ 105 | PE2 INTB | High | Level | Non | + | IRQ 106 | PE2 INTC | High | Level | Non | + | IRQ 107 | PE2 INTD | Risin | Edge | Non | + | IRQ 108 | PCI Express MSI Level 4 | Risin | Edge | Non | + | IRQ 109 | PCI Express MSI Level 5 | Risin | Edge | Non | + | IRQ 110 | PCI Express MSI Level 6 | Risin | Edge | Non | + | IRQ 111 | PCI Express MSI Level 7 | Risin | Edge | Non | + | IRQ 116 | PCI Express MSI Level 12 | Risin | Edge | Non | + | IRQ 112 | PCI Express MSI Level 8 | Risin | Edge | Non | + | IRQ 113 | PCI Express MSI Level 9 | Risin | Edge | Non | + | IRQ 114 | PCI Express MSI Level 10 | Risin | Edge | Non | + | IRQ 115 | PCI Express MSI Level 11 | Risin | Edge | Non | + | IRQ 117 | PCI Express MSI Level 13 | Risin | Edge | Non | + | IRQ 118 | PCI Express MSI Level 14 | Risin | Edge | Non | + | IRQ 119 | PCI Express MSI Level 15 | Risin | Edge | Non | + | IRQ 120 | PCI Express MSI Level 16 | Risin | Edge | Non | + | IRQ 121 | PCI Express MSI Level 17 | Risin | Edge | Non | + | IRQ 122 | PCI Express MSI Level 18 | Risin | Edge | Non | + | IRQ 123 | PCI Express MSI Level 19 | Risin | Edge | Non | + | IRQ 124 | PCI Express MSI Level 20 | Risin | Edge | Non | + | IRQ 125 | PCI Express MSI Level 21 | Risin | Edge | Non | + | IRQ 126 | PCI Express MSI Level 22 | Risin | Edge | Non | + | IRQ 127 | PCI Express MSI Level 23 | Risin | Edge | Non | + +---------+-----------------------------------+-------+-------+------*/ + /*--------------------------------------------------------------------+ + | Put UICs in PowerPC440SPemode. + | Initialise UIC registers. Clear all interrupts. Disable all + | interrupts. + | Set critical interrupt values. Set interrupt polarities. Set + | interrupt trigger levels. Make bit 0 High priority. Clear all + | interrupts again. + +-------------------------------------------------------------------*/ + mtdcr (uic3sr, 0xffffffff); /* Clear all interrupts */ + mtdcr (uic3er, 0x00000000); /* disable all interrupts */ + mtdcr (uic3cr, 0x00000000); /* Set Critical / Non Critical + * interrupts */ + mtdcr (uic3pr, 0xffffffff); /* Set Interrupt Polarities */ + mtdcr (uic3tr, 0x001fffff); /* Set Interrupt Trigger Levels */ + mtdcr (uic3vr, 0x00000001); /* Set Vect base=0,INT31 Highest + * priority */ + mtdcr (uic3sr, 0x00000000); /* clear all interrupts */ + mtdcr (uic3sr, 0xffffffff); /* clear all interrupts */ + + mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */ + mtdcr (uic2er, 0x00000000); /* disable all interrupts */ + mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical + * interrupts */ + mtdcr (uic2pr, 0xebebebff); /* Set Interrupt Polarities */ + mtdcr (uic2tr, 0x74747400); /* Set Interrupt Trigger Levels */ + mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest + * priority */ + mtdcr (uic2sr, 0x00000000); /* clear all interrupts */ + mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */ + + mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts */ + mtdcr (uic1er, 0x00000000); /* disable all interrupts */ + mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical + * interrupts */ + mtdcr (uic1pr, 0xffffffff); /* Set Interrupt Polarities */ + mtdcr (uic1tr, 0x001f8040); /* Set Interrupt Trigger Levels */ + mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest + * priority */ + mtdcr (uic1sr, 0x00000000); /* clear all interrupts */ + mtdcr (uic1sr, 0xffffffff); /* clear all interrupts */ + + mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */ + mtdcr (uic0er, 0x00000000); /* disable all interrupts excepted + * cascade to be checked */ + mtdcr (uic0cr, 0x00104001); /* Set Critical / Non Critical + * interrupts */ + mtdcr (uic0pr, 0xffffffff); /* Set Interrupt Polarities */ + mtdcr (uic0tr, 0x010f0004); /* Set Interrupt Trigger Levels */ + mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest + * priority */ + mtdcr (uic0sr, 0x00000000); /* clear all interrupts */ + mtdcr (uic0sr, 0xffffffff); /* clear all interrupts */ + + /* SDR0_MFR should be part of Ethernet init */ + mfsdr (sdr_mfr, mfr); + mfr &= ~SDR0_MFR_ECS_MASK; + /*mtsdr(sdr_mfr, mfr);*/ + fpga_init(); + + return 0; +} + +int checkboard (void) +{ + sys_info_t sysinfo; + + get_sys_info (&sysinfo); + + printf ("Board: AMCC 440SPe Evaluation Board\n"); + printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000); + printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000); + printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000); + printf ("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000); + printf ("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000); + printf ("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000); + printf ("\tDDR: %lu MHz\n", sysinfo.freqDDR / 1000000); + return 0; +} + +static long int yucca_probe_for_dimms(void) +{ + long int dimm_installed[MAXDIMMS]; + long int dimm_num, probe_result; + long int dimms_found = 0; + uchar dimm_addr = IIC0_DIMM0_ADDR; + + for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) { + /* check if there is a chip at the dimm address */ + switch (dimm_num) { + case 0: + dimm_addr = IIC0_DIMM0_ADDR; + break; + case 1: + dimm_addr = IIC0_DIMM1_ADDR; + break; + } + probe_result = i2c_probe(dimm_addr); + + if (probe_result == 0) { + dimm_installed[dimm_num] = TRUE; + dimms_found++; + debug("DIMM slot %d: DDR2 SDRAM detected\n",dimm_num); + } else { + dimm_installed[dimm_num] = FALSE; + debug("DIMM slot %d: Not populated or cannot sucessfully probe the DIMM\n", dimm_num); + } + } + + if (dimms_found == 0) { + printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n"); + hang(); + } + + if (dimm_installed[0] != TRUE) { + printf("\nERROR - DIMM slot 0 must be populated before DIMM slot 1.\n"); + printf(" Unsupported configuration. Move DIMM module from DIMM slot 1 to slot 0.\n\n"); + hang(); + } + + return dimms_found; +} + +/************************************************************************* + * init SDRAM controller with fixed value + * the initialization values are for 2x MICRON DDR2 + * PN: MT18HTF6472DY-53EB2 + * 512MB, DDR2, 533, CL4, ECC, REG + ************************************************************************/ +static long int fixed_sdram(void) +{ + long int yucca_dimms = 0; + + yucca_dimms = yucca_probe_for_dimms(); + + /* SDRAM0_MCOPT2 (0X21) Clear DCEN BIT */ + mtdcr( 0x10, 0x00000021 ); + mtdcr( 0x11, 0x84000000 ); + + /* SDRAM0_MCOPT1 (0X20) ECC OFF / 64 bits / 4 banks / DDR2 */ + mtdcr( 0x10, 0x00000020 ); + mtdcr( 0x11, 0x2D122000 ); + + /* SET MCIF0_CODT Die Termination On */ + mtdcr( 0x10, 0x00000026 ); + if (yucca_dimms == 2) + mtdcr( 0x11, 0x2A800021 ); + else if (yucca_dimms == 1) + mtdcr( 0x11, 0x02800021 ); + + /* On-Die Termination for Bank 0 */ + mtdcr( 0x10, 0x00000022 ); + if (yucca_dimms == 2) + mtdcr( 0x11, 0x18000000 ); + else if (yucca_dimms == 1) + mtdcr( 0x11, 0x06000000 ); + + /* On-Die Termination for Bank 1 */ + mtdcr( 0x10, 0x00000023 ); + if (yucca_dimms == 2) + mtdcr( 0x11, 0x18000000 ); + else if (yucca_dimms == 1) + mtdcr( 0x11, 0x01800000 ); + + /* On-Die Termination for Bank 2 */ + mtdcr( 0x10, 0x00000024 ); + if (yucca_dimms == 2) + mtdcr( 0x11, 0x01800000 ); + else if (yucca_dimms == 1) + mtdcr( 0x11, 0x00000000 ); + + /* On-Die Termination for Bank 3 */ + mtdcr( 0x10, 0x00000025 ); + if (yucca_dimms == 2) + mtdcr( 0x11, 0x01800000 ); + else if (yucca_dimms == 1) + mtdcr( 0x11, 0x00000000 ); + + /* Refresh Time register (0x30) Refresh every 7.8125uS */ + mtdcr( 0x10, 0x00000030 ); + mtdcr( 0x11, 0x08200000 ); + + /* SET MCIF0_MMODE CL 4 */ + mtdcr( 0x10, 0x00000088 ); + mtdcr( 0x11, 0x00000642 ); + + /* MCIF0_MEMODE */ + mtdcr( 0x10, 0x00000089 ); + mtdcr( 0x11, 0x00000004 ); + + /*SET MCIF0_MB0CF */ + mtdcr( 0x10, 0x00000040 ); + mtdcr( 0x11, 0x00000201 ); + + /* SET MCIF0_MB1CF */ + mtdcr( 0x10, 0x00000044 ); + mtdcr( 0x11, 0x00000201 ); + + /* SET MCIF0_MB2CF */ + mtdcr( 0x10, 0x00000048 ); + if (yucca_dimms == 2) + mtdcr( 0x11, 0x00000201 ); + else if (yucca_dimms == 1) + mtdcr( 0x11, 0x00000000 ); + + /* SET MCIF0_MB3CF */ + mtdcr( 0x10, 0x0000004c ); + if (yucca_dimms == 2) + mtdcr( 0x11, 0x00000201 ); + else if (yucca_dimms == 1) + mtdcr( 0x11, 0x00000000 ); + + /* SET MCIF0_INITPLR0 # NOP */ + mtdcr( 0x10, 0x00000050 ); + mtdcr( 0x11, 0xB5380000 ); + + /* SET MCIF0_INITPLR1 # PRE */ + mtdcr( 0x10, 0x00000051 ); + mtdcr( 0x11, 0x82100400 ); + + /* SET MCIF0_INITPLR2 # EMR2 */ + mtdcr( 0x10, 0x00000052 ); + mtdcr( 0x11, 0x80820000 ); + + /* SET MCIF0_INITPLR3 # EMR3 */ + mtdcr( 0x10, 0x00000053 ); + mtdcr( 0x11, 0x80830000 ); + + /* SET MCIF0_INITPLR4 # EMR DLL ENABLE */ + mtdcr( 0x10, 0x00000054 ); + mtdcr( 0x11, 0x80810000 ); + + /* SET MCIF0_INITPLR5 # MR DLL RESET */ + mtdcr( 0x10, 0x00000055 ); + mtdcr( 0x11, 0x80800542 ); + + /* SET MCIF0_INITPLR6 # PRE */ + mtdcr( 0x10, 0x00000056 ); + mtdcr( 0x11, 0x82100400 ); + + /* SET MCIF0_INITPLR7 # Refresh */ + mtdcr( 0x10, 0x00000057 ); + mtdcr( 0x11, 0x8A080000 ); + + /* SET MCIF0_INITPLR8 # Refresh */ + mtdcr( 0x10, 0x00000058 ); + mtdcr( 0x11, 0x8A080000 ); + + /* SET MCIF0_INITPLR9 # Refresh */ + mtdcr( 0x10, 0x00000059 ); + mtdcr( 0x11, 0x8A080000 ); + + /* SET MCIF0_INITPLR10 # Refresh */ + mtdcr( 0x10, 0x0000005A ); + mtdcr( 0x11, 0x8A080000 ); + + /* SET MCIF0_INITPLR11 # MR */ + mtdcr( 0x10, 0x0000005B ); + mtdcr( 0x11, 0x80800442 ); + + /* SET MCIF0_INITPLR12 # EMR OCD Default*/ + mtdcr( 0x10, 0x0000005C ); + mtdcr( 0x11, 0x80810380 ); + + /* SET MCIF0_INITPLR13 # EMR OCD Exit */ + mtdcr( 0x10, 0x0000005D ); + mtdcr( 0x11, 0x80810000 ); + + /* 0x80: Adv Addr clock by 180 deg */ + mtdcr( 0x10, 0x00000080 ); + mtdcr( 0x11, 0x80000000 ); + + /* 0x21: Exit self refresh, set DC_EN */ + mtdcr( 0x10, 0x00000021 ); + mtdcr( 0x11, 0x28000000 ); + + /* 0x81: Write DQS Adv 90 + Fractional DQS Delay */ + mtdcr( 0x10, 0x00000081 ); + mtdcr( 0x11, 0x80000800 ); + + /* MCIF0_SDTR1 */ + mtdcr( 0x10, 0x00000085 ); + mtdcr( 0x11, 0x80201000 ); + + /* MCIF0_SDTR2 */ + mtdcr( 0x10, 0x00000086 ); + mtdcr( 0x11, 0x42103242 ); + + /* MCIF0_SDTR3 */ + mtdcr( 0x10, 0x00000087 ); + mtdcr( 0x11, 0x0C100D14 ); + + /* SET MQ0_B0BAS base addr 00000000 / 256MB */ + mtdcr( 0x40, 0x0000F800 ); + + /* SET MQ0_B1BAS base addr 10000000 / 256MB */ + mtdcr( 0x41, 0x0400F800 ); + + /* SET MQ0_B2BAS base addr 20000000 / 256MB */ + if (yucca_dimms == 2) + mtdcr( 0x42, 0x0800F800 ); + else if (yucca_dimms == 1) + mtdcr( 0x42, 0x00000000 ); + + /* SET MQ0_B3BAS base addr 30000000 / 256MB */ + if (yucca_dimms == 2) + mtdcr( 0x43, 0x0C00F800 ); + else if (yucca_dimms == 1) + mtdcr( 0x43, 0x00000000 ); + + /* SDRAM_RQDC */ + mtdcr( 0x10, 0x00000070 ); + mtdcr( 0x11, 0x8000003F ); + + /* SDRAM_RDCC */ + mtdcr( 0x10, 0x00000078 ); + mtdcr( 0x11, 0x80000000 ); + + /* SDRAM_RFDC */ + mtdcr( 0x10, 0x00000074 ); + mtdcr( 0x11, 0x00000220 ); + + return (yucca_dimms * 512) << 20; +} + +long int initdram (int board_type) +{ + long dram_size = 0; + + dram_size = fixed_sdram(); + + return dram_size; +} + +#if defined(CFG_DRAM_TEST) +int testdram (void) +{ + uint *pstart = (uint *) 0x00000000; + uint *pend = (uint *) 0x08000000; + uint *p; + + for (p = pstart; p < pend; p++) + *p = 0xaaaaaaaa; + + for (p = pstart; p < pend; p++) { + if (*p != 0xaaaaaaaa) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + for (p = pstart; p < pend; p++) + *p = 0x55555555; + + for (p = pstart; p < pend; p++) { + if (*p != 0x55555555) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + return 0; +} +#endif + +/************************************************************************* + * pci_pre_init + * + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. + * + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +int pci_pre_init(struct pci_controller * hose ) +{ + unsigned long strap; + + /*-------------------------------------------------------------------+ + * The yucca board is always configured as the host & requires the + * PCI arbiter to be enabled. + *-------------------------------------------------------------------*/ + mfsdr(sdr_sdstp1, strap); + if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) { + printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); + return 0; + } + + return 1; +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ + +/************************************************************************* + * pci_target_init + * + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) +void pci_target_init(struct pci_controller * hose ) +{ + DECLARE_GLOBAL_DATA_PTR; + + /*-------------------------------------------------------------------+ + * Disable everything + *-------------------------------------------------------------------*/ + out32r( PCIX0_PIM0SA, 0 ); /* disable */ + out32r( PCIX0_PIM1SA, 0 ); /* disable */ + out32r( PCIX0_PIM2SA, 0 ); /* disable */ + out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ + + /*-------------------------------------------------------------------+ + * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 + * strapping options to not support sizes such as 128/256 MB. + *-------------------------------------------------------------------*/ + out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE ); + out32r( PCIX0_PIM0LAH, 0 ); + out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); + out32r( PCIX0_BAR0, 0 ); + + /*-------------------------------------------------------------------+ + * Program the board's subsystem id/vendor id + *-------------------------------------------------------------------*/ + out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID ); + out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID ); + + out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY ); +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ + +/************************************************************************* + * is_pci_host + * + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. + * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. + * + * Return 0 for adapter mode, non-zero for host (monarch) mode. + * + * + ************************************************************************/ +#if defined(CONFIG_PCI) +int is_pci_host(struct pci_controller *hose) +{ + /* The yucca board is always configured as host. */ + return 1; +} +#endif /* defined(CONFIG_PCI) */ + +int misc_init_f (void) +{ + uint reg; +#if defined(CONFIG_STRESS) + uint i ; + uint disp; +#endif + + out16(FPGA_REG10, (in16(FPGA_REG10) & + ~(FPGA_REG10_AUTO_NEG_DIS|FPGA_REG10_RESET_ETH)) | + FPGA_REG10_10MHZ_ENABLE | + FPGA_REG10_100MHZ_ENABLE | + FPGA_REG10_GIGABIT_ENABLE | + FPGA_REG10_FULL_DUPLEX ); + + udelay(10000); /* wait 10ms */ + + out16(FPGA_REG10, (in16(FPGA_REG10) | FPGA_REG10_RESET_ETH)); + + /* minimal init for PCIe */ + /* pci express 0 Endpoint Mode */ + mfsdr(SDR0_PE0DLPSET, reg); + reg &= (~0x00400000); + mtsdr(SDR0_PE0DLPSET, reg); + /* pci express 1 Rootpoint Mode */ + mfsdr(SDR0_PE1DLPSET, reg); + reg |= 0x00400000; + mtsdr(SDR0_PE1DLPSET, reg); + /* pci express 2 Rootpoint Mode */ + mfsdr(SDR0_PE2DLPSET, reg); + reg |= 0x00400000; + mtsdr(SDR0_PE2DLPSET, reg); + + out16(FPGA_REG1C,(in16 (FPGA_REG1C) & + ~FPGA_REG1C_PE0_ROOTPOINT & + ~FPGA_REG1C_PE1_ENDPOINT & + ~FPGA_REG1C_PE2_ENDPOINT)); + +#if defined(CONFIG_STRESS) + /* + * all this setting done by linux only needed by stress an charac. test + * procedure + * PCIe 1 Rootpoint PCIe2 Endpoint + * PCIe 0 FIR Pre-emphasis Filter Coefficients & Transmit Driver + * Power Level + */ + for (i = 0, disp = 0; i < 8; i++, disp += 3) { + mfsdr(SDR0_PE0HSSSET1L0 + disp, reg); + reg |= 0x33000000; + mtsdr(SDR0_PE0HSSSET1L0 + disp, reg); + } + + /* + * PCIe 1 FIR Pre-emphasis Filter Coefficients & Transmit Driver + * Power Level + */ + for (i = 0, disp = 0; i < 4; i++, disp += 3) { + mfsdr(SDR0_PE1HSSSET1L0 + disp, reg); + reg |= 0x33000000; + mtsdr(SDR0_PE1HSSSET1L0 + disp, reg); + } + + /* + * PCIE 2 FIR Pre-emphasis Filter Coefficients & Transmit Driver + * Power Level + */ + for (i = 0, disp = 0; i < 4; i++, disp += 3) { + mfsdr(SDR0_PE2HSSSET1L0 + disp, reg); + reg |= 0x33000000; + mtsdr(SDR0_PE2HSSSET1L0 + disp, reg); + } + + reg = 0x21242222; + mtsdr(SDR0_PE2UTLSET1, reg); + reg = 0x11000000; + mtsdr(SDR0_PE2UTLSET2, reg); + /* pci express 1 Endpoint Mode */ + reg = 0x00004000; + mtsdr(SDR0_PE2DLPSET, reg); + + mtsdr(SDR0_UART1, 0x2080005a); /* patch for TG */ +#endif + return 0; +} + +void fpga_init(void) +{ + /* + * by default sdram access is disabled by fpga + */ + out16(FPGA_REG10, (in16 (FPGA_REG10) | + FPGA_REG10_SDRAM_ENABLE | + FPGA_REG10_ENABLE_DISPLAY )); + + return; +} + +#ifdef CONFIG_POST +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + return (ctrlc()); +} +#endif + +/*---------------------------------------------------------------------------+ + | onboard_pci_arbiter_selected => from EPLD + +---------------------------------------------------------------------------*/ +int onboard_pci_arbiter_selected(int core_pci) +{ +#if 0 + unsigned long onboard_pci_arbiter_sel; + + onboard_pci_arbiter_sel = in16(FPGA_REG0) & FPGA_REG0_EXT_ARB_SEL_MASK; + + if (onboard_pci_arbiter_sel == FPGA_REG0_EXT_ARB_SEL_EXTERNAL) + return (BOARD_OPTION_SELECTED); + else +#endif + return (BOARD_OPTION_NOT_SELECTED); +} + +/*---------------------------------------------------------------------------+ + | ppcMfcpr. + +---------------------------------------------------------------------------*/ +unsigned long ppcMfcpr(unsigned long cpr_reg) +{ + unsigned long msr; + unsigned long cpr_cfgaddr_temp; + unsigned long cpr_value; + + msr = (mfmsr () & ~(MSR_EE)); + cpr_cfgaddr_temp = mfdcr(CPR0_CFGADDR); + mtdcr(CPR0_CFGADDR, cpr_reg); + cpr_value = mfdcr(CPR0_CFGDATA); + mtdcr(CPR0_CFGADDR, cpr_cfgaddr_temp); + mtmsr(msr); + + return (cpr_value); +} + +/*----------------------------------------------------------------------------+ +| Indirect Access of the System DCR's (SDR) +| ppcMfsdr ++----------------------------------------------------------------------------*/ +unsigned long ppcMfsdr(unsigned long sdr_reg) +{ + unsigned long msr; + unsigned long sdr_cfgaddr_temp; + unsigned long sdr_value; + + msr = (mfmsr () & ~(MSR_EE)); + sdr_cfgaddr_temp = mfdcr(SDR0_CFGADDR); + mtdcr(SDR0_CFGADDR, sdr_reg); + sdr_value = mfdcr(SDR0_CFGDATA); + mtdcr(SDR0_CFGADDR, sdr_cfgaddr_temp); + mtmsr(msr); + + return (sdr_value); +} + |