Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  run arm_pci_init after relocation
  IXP42x PCI rewrite
  update/fix PDNB3 board
  update/fix IXDP425 / IXDPG425 boards
  add dvlhost (dLAN 200 AV Wireless G) board
  IXP NPE: add support for fixed-speed MII ports
  update/fix AcTux4 board
  update/fix AcTux3 board
  update/fix AcTux2 board
  update/fix AcTux1 board
  use -ffunction-sections / --gc-sections on IXP42x
  support CONFIG_SYS_LDSCRIPT on ARM
  fix "depend" target in npe directory
  Fix IXP code to work after relocation was added
  trigger hardware watchdog in IXP42x serial driver
  add support for IXP42x Rev. B1 and newer
  add XScale sub architecture (IXP/PXA) to maintainer list

Conflicts:
	arch/arm/lib/board.c

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 55 insertions, 50 deletions

diff --git a/board/actux1/actux1.c b/board/actux1/actux1.c
index 85e3f9e6c4..2f631b7085 100644
--- a/board/actux1/actux1.c
+++ b/board/actux1/actux1.c
@@ -37,49 +37,57 @@
 #include <asm/arch/ixp425.h>
 #include <asm/io.h>
 #include <miiphy.h>
+#ifdef CONFIG_PCI
+#include <pci.h>
+#include <asm/arch/ixp425pci.h>
+#endif
 
 #include "actux1_hw.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
-int board_init (void)
+int board_early_init_f(void)
+{
+	/* CS5: Debug port */
+	writel(0x9d520003, IXP425_EXP_CS5);
+	/* CS6: HwRel */
+	writel(0x81860001, IXP425_EXP_CS6);
+	/* CS7: LEDs */
+	writel(0x80900003, IXP425_EXP_CS7);
+	return 0;
+}
+
+int board_init(void)
 {
 	gd->bd->bi_arch_number = MACH_TYPE_ACTUX1;
 
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0x00000100;
 
-	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST);
-	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_IORST);
+	GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST);
+	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST);
 
-	/* Setup GPIO's for PCI INTA */
-	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_PCI1_INTA);
-	GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_PCI1_INTA);
+	/* Setup GPIOs for PCI INTA */
+	GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI1_INTA);
+	GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI1_INTA);
 
-	/* Setup GPIO's for 33MHz clock output */
-	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_PCI_CLK);
-	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK);
-	*IXP425_GPIO_GPCLKR = 0x011001FF;
+	/* Setup GPIOs for 33MHz clock output */
+	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK);
+	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK);
+	writel(0x011001FF, IXP425_GPIO_GPCLKR);
 
-	/* CS5: Debug port */
-	*IXP425_EXP_CS5 = 0x9d520003;
-	/* CS6: HwRel */
-	*IXP425_EXP_CS6 = 0x81860001;
-	/* CS7: LEDs */
-	*IXP425_EXP_CS7 = 0x80900003;
-
-	udelay (533);
-	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);
+	udelay(533);
+	GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST);
 
-	ACTUX1_LED1 (2);
-	ACTUX1_LED2 (2);
-	ACTUX1_LED3 (0);
-	ACTUX1_LED4 (0);
-	ACTUX1_LED5 (0);
-	ACTUX1_LED6 (0);
-	ACTUX1_LED7 (0);
+	ACTUX1_LED1(2);
+	ACTUX1_LED2(2);
+	ACTUX1_LED3(0);
+	ACTUX1_LED4(0);
+	ACTUX1_LED5(0);
+	ACTUX1_LED6(0);
+	ACTUX1_LED7(0);
 
-	ACTUX1_HS (ACTUX1_HS_DCD);
+	ACTUX1_HS(ACTUX1_HS_DCD);
 
 	return 0;
 }
@@ -87,21 +95,21 @@ int board_init (void)
 /*
  * Check Board Identity
  */
-int checkboard (void)
+int checkboard(void)
 {
 	char buf[64];
 	int i = getenv_f("serial#", buf, sizeof(buf));
 
-	puts ("Board: AcTux-1 rev.");
-	putc (ACTUX1_BOARDREL + 'A' - 1);
+	puts("Board: AcTux-1 rev.");
+	putc(ACTUX1_BOARDREL + 'A' - 1);
 
 	if (i > 0) {
 		puts(", serial# ");
 		puts(buf);
 	}
-	putc ('\n');
+	putc('\n');
 
-	return (0);
+	return 0;
 }
 
 /*************************************************************************
@@ -110,39 +118,36 @@ int checkboard (void)
  * 1 = Rev. A
  * 2 = Rev. B
  *************************************************************************/
-u32 get_board_rev (void)
+u32 get_board_rev(void)
 {
 	return ACTUX1_BOARDREL;
 }
 
-int dram_init (void)
+int dram_init(void)
 {
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return (0);
+	gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20);
+	return 0;
 }
 
-#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
-extern struct pci_controller hose;
-extern void pci_ixp_init (struct pci_controller *hose);
 
-void pci_init_board (void)
+#ifdef CONFIG_PCI
+struct pci_controller hose;
+
+void pci_init_board(void)
 {
-	extern void pci_ixp_init (struct pci_controller *hose);
-	pci_ixp_init (&hose);
+	pci_ixp_init(&hose);
 }
 #endif
 
-void reset_phy (void)
+void reset_phy(void)
 {
 	u16 id1, id2;
 
 	/* initialize the PHY */
-	miiphy_reset ("NPE0", CONFIG_PHY_ADDR);
+	miiphy_reset("NPE0", CONFIG_PHY_ADDR);
 
-	miiphy_read ("NPE0", CONFIG_PHY_ADDR, MII_PHYSID1, &id1);
-	miiphy_read ("NPE0", CONFIG_PHY_ADDR, MII_PHYSID2, &id2);
+	miiphy_read("NPE0", CONFIG_PHY_ADDR, MII_PHYSID1, &id1);
+	miiphy_read("NPE0", CONFIG_PHY_ADDR, MII_PHYSID2, &id2);
 
 	id2 &= 0xFFF0;		/* mask out revision bits */
 
@@ -153,9 +158,9 @@ void reset_phy (void)
 		 * LED2 (unused) = LINK,
 		 * LED3(red) = Coll
 		 */
-		miiphy_write ("NPE0", CONFIG_PHY_ADDR, 20, 0xD432);
+		miiphy_write("NPE0", CONFIG_PHY_ADDR, 20, 0xD432);
 	} else if (id1 == 0x143 && id2 == 0xbc30) {
 		/* BCM5241: default values are OK */
 	} else
-		printf ("unknown ethernet PHY ID: %x %x\n", id1, id2);
+		printf("unknown ethernet PHY ID: %x %x\n", id1, id2);
 }