arm: kirkwood: Dreamplug : Use Marvell uclass mvgbe and PHY driver for Ethernet

The Globalscale Technologies Dreamplug board has the network chip
Marvell 88E1116R. Use uclass mvgbe and the compatible driver M88E1310
driver to bring up Ethernet.

- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- Add board_eth_init() to use uclass mvgbe to bring up both network
port 0 and 1. And remove ad-hoc code.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Add myself as maintainer (this board seems to be orphaned,
could not contact Jason Cooper using current email).
- Miscellaneous changes: Move constants to .c file and remove header file
board/Marvell/dreamplug/dreamplug.h, cleanup comments.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>

3 files changed, 15 insertions, 105 deletions

diff --git a/board/Marvell/dreamplug/MAINTAINERS b/board/Marvell/dreamplug/MAINTAINERS
index 2561ba8134..6bad3ea78b 100644
--- a/board/Marvell/dreamplug/MAINTAINERS
+++ b/board/Marvell/dreamplug/MAINTAINERS
@@ -1,4 +1,5 @@
 DREAMPLUG BOARD
+M:	Tony Dinh <mibodhi@gmail.com>
 M:	Jason Cooper <u-boot@lakedaemon.net>
 S:	Maintained
 F:	board/Marvell/dreamplug/
diff --git a/board/Marvell/dreamplug/dreamplug.c b/board/Marvell/dreamplug/dreamplug.c
index 7ba14021b2..d15faa1cb7 100644
--- a/board/Marvell/dreamplug/dreamplug.c
+++ b/board/Marvell/dreamplug/dreamplug.c
@@ -1,8 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright (C) 2021  Tony Dinh <mibodhi@gmail.com>
- * (C) Copyright 2011
- * Jason Cooper <u-boot@lakedaemon.net>
+ * Copyright (C) 2021-2022 Tony Dinh <mibodhi@gmail.com>
+ * Copyright (C) 2011 Jason Cooper <u-boot@lakedaemon.net>
  *
  * Based on work by:
  * Marvell Semiconductor <www.marvell.com>
@@ -11,16 +10,19 @@
 
 #include <common.h>
 #include <init.h>
-#include <miiphy.h>
-#include <net.h>
+#include <netdev.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/soc.h>
 #include <asm/arch/mpp.h>
 #include <asm/global_data.h>
-#include "dreamplug.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#define DREAMPLUG_OE_LOW	(~(0))
+#define DREAMPLUG_OE_HIGH	(~(0))
+#define DREAMPLUG_OE_VAL_LOW	0
+#define DREAMPLUG_OE_VAL_HIGH	(0xf << 16) /* 4 LED Pins high */
+
 int board_early_init_f(void)
 {
 	/*
@@ -90,83 +92,15 @@ int board_early_init_f(void)
 	return 0;
 }
 
-int board_init(void)
-{
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
-
-	return 0;
-}
-
-static int fdt_get_phy_addr(const char *path)
-{
-	const void *fdt = gd->fdt_blob;
-	const u32 *reg;
-	const u32 *val;
-	int node, phandle, addr;
-
-	/* Find the node by its full path */
-	node = fdt_path_offset(fdt, path);
-	if (node >= 0) {
-		/* Look up phy-handle */
-		val = fdt_getprop(fdt, node, "phy-handle", NULL);
-		if (val) {
-			phandle = fdt32_to_cpu(*val);
-			if (!phandle)
-				return -1;
-			/* Follow it to its node */
-			node = fdt_node_offset_by_phandle(fdt, phandle);
-			if (node) {
-				/* Look up reg */
-				reg = fdt_getprop(fdt, node, "reg", NULL);
-				if (reg) {
-					addr = fdt32_to_cpu(*reg);
-					return addr;
-				}
-			}
-		}
-	}
-	return -1;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-void mv_phy_88e1116_init(const char *name, const char *path)
+int board_eth_init(struct bd_info *bis)
 {
-	u16 reg;
-	int phyaddr;
-
-	if (miiphy_set_current_dev(name))
-		return;
-
-	phyaddr = fdt_get_phy_addr(path);
-	if (phyaddr < 0)
-		return;
-
-	/*
-	 * Enable RGMII delay on Tx and Rx for CPU port
-	 * Ref: sec 4.7.2 of chip datasheet
-	 */
-	miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 2);
-	miiphy_read(name, phyaddr, MV88E1116_MAC_CTRL2_REG, &reg);
-	reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
-	miiphy_write(name, phyaddr, MV88E1116_MAC_CTRL2_REG, reg);
-	miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 0);
-
-	/* reset the phy */
-	miiphy_reset(name, phyaddr);
-
-	printf("88E1116 Initialized on %s\n", name);
+	return cpu_eth_init(bis);
 }
 
-void reset_phy(void)
+int board_init(void)
 {
-	char *eth0_name = "ethernet-controller@72000";
-	char *eth0_path = "/ocp@f1000000/ethernet-controller@72000/ethernet0-port@0";
-	char *eth1_name = "ethernet-controller@76000";
-	char *eth1_path = "/ocp@f1000000/ethernet-controller@76000/ethernet1-port@0";
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
 
-	/* configure and initialize both PHY's */
-	mv_phy_88e1116_init(eth0_name, eth0_path);
-	mv_phy_88e1116_init(eth1_name, eth1_path);
+	return 0;
 }
-#endif /* CONFIG_RESET_PHY_R */
diff --git a/board/Marvell/dreamplug/dreamplug.h b/board/Marvell/dreamplug/dreamplug.h
deleted file mode 100644
index 6f62238985..0000000000
--- a/board/Marvell/dreamplug/dreamplug.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011
- * Jason Cooper <u-boot@lakedaemon.net>
- *
- * Based on work by:
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Siddarth Gore <gores@marvell.com>
- */
-
-#ifndef __DREAMPLUG_H
-#define __DREAMPLUG_H
-
-#define DREAMPLUG_OE_LOW	(~(0))
-#define DREAMPLUG_OE_HIGH	(~(0))
-#define DREAMPLUG_OE_VAL_LOW	0
-#define DREAMPLUG_OE_VAL_HIGH	(0xf << 16) /* 4 LED Pins high */
-
-/* PHY related */
-#define MV88E1116_MAC_CTRL2_REG		21
-#define MV88E1116_PGADR_REG		22
-#define MV88E1116_RGMII_TXTM_CTRL	(1 << 4)
-#define MV88E1116_RGMII_RXTM_CTRL	(1 << 5)
-
-#endif /* __DREAMPLUG_H */