PowerPC: drop some 74xx_7xx boards and related code

The file  board/Marvell/include/mv_gen_reg.h  is incompatible with
the GPL (see for example the "MARVELL RESERVES THE RIGHT AT ITS SOLE
DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO
MARVELL" clause).  As this cannot be fixed, we remove the file and all
code that depends on it.  Fortunately this only affects some very old
boards that have long reached EOL:
	CPCI750
	DB64360
	DB64460
	p3m750
	p3m7448

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Roger Meier <r.meier@siemens.com>

1 files changed, 0 insertions, 1945 deletions

diff --git a/board/Marvell/db64360/sdram_init.c b/board/Marvell/db64360/sdram_init.c
deleted file mode 100644
index 5954b4cea2..0000000000
--- a/board/Marvell/db64360/sdram_init.c
+++ /dev/null
@@ -1,1945 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*************************************************************************
- * adaption for the Marvell DB64360 Board
- * Ingo Assmus (ingo.assmus@keymile.com)
- ************************************************************************/
-
-
-/* sdram_init.c - automatic memory sizing */
-
-#include <common.h>
-#include <74xx_7xx.h>
-#include "../include/memory.h"
-#include "../include/pci.h"
-#include "../include/mv_gen_reg.h"
-#include <net.h>
-
-#include "eth.h"
-#include "mpsc.h"
-#include "../common/i2c.h"
-#include "64360.h"
-#include "mv_regs.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define MAP_PCI
-
-int set_dfcdlInit (void);	/* setup delay line of Mv64360 */
-int mvDmaIsChannelActive (int);
-int mvDmaSetMemorySpace (ulong, ulong, ulong, ulong, ulong);
-int mvDmaTransfer (int, ulong, ulong, ulong, ulong);
-
-/* ------------------------------------------------------------------------- */
-
-int
-memory_map_bank (unsigned int bankNo,
-		 unsigned int bankBase, unsigned int bankLength)
-{
-#ifdef MAP_PCI
-	PCI_HOST host;
-#endif
-
-
-#ifdef DEBUG
-	if (bankLength > 0) {
-		printf ("mapping bank %d at %08x - %08x\n",
-			bankNo, bankBase, bankBase + bankLength - 1);
-	} else {
-		printf ("unmapping bank %d\n", bankNo);
-	}
-#endif
-
-	memoryMapBank (bankNo, bankBase, bankLength);
-
-#ifdef MAP_PCI
-	for (host = PCI_HOST0; host <= PCI_HOST1; host++) {
-		const int features =
-			PREFETCH_ENABLE |
-			DELAYED_READ_ENABLE |
-			AGGRESSIVE_PREFETCH |
-			READ_LINE_AGGRESSIVE_PREFETCH |
-			READ_MULTI_AGGRESSIVE_PREFETCH |
-			MAX_BURST_4 | PCI_NO_SWAP;
-
-		pciMapMemoryBank (host, bankNo, bankBase, bankLength);
-
-		pciSetRegionSnoopMode (host, bankNo, PCI_SNOOP_WB, bankBase,
-				       bankLength);
-
-		pciSetRegionFeatures (host, bankNo, features, bankBase,
-				      bankLength);
-	}
-#endif
-	return 0;
-}
-
-#define GB	   (1 << 30)
-
-/* much of this code is based on (or is) the code in the pip405 port */
-/* thanks go to the authors of said port - Josh */
-
-/* structure to store the relevant information about an sdram bank */
-typedef struct sdram_info {
-	uchar drb_size;
-	uchar registered, ecc;
-	uchar tpar;
-	uchar tras_clocks;
-	uchar burst_len;
-	uchar banks, slot;
-} sdram_info_t;
-
-/* Typedefs for 'gtAuxilGetDIMMinfo' function */
-
-typedef enum _memoryType { SDRAM, DDR } MEMORY_TYPE;
-
-typedef enum _voltageInterface { TTL_5V_TOLERANT, LVTTL, HSTL_1_5V,
-	SSTL_3_3V, SSTL_2_5V, VOLTAGE_UNKNOWN,
-} VOLTAGE_INTERFACE;
-
-typedef enum _max_CL_supported_DDR { DDR_CL_1 = 1, DDR_CL_1_5 = 2, DDR_CL_2 =
-		4, DDR_CL_2_5 = 8, DDR_CL_3 = 16, DDR_CL_3_5 =
-		32, DDR_CL_FAULT } MAX_CL_SUPPORTED_DDR;
-typedef enum _max_CL_supported_SD { SD_CL_1 =
-		1, SD_CL_2, SD_CL_3, SD_CL_4, SD_CL_5, SD_CL_6, SD_CL_7,
-		SD_FAULT } MAX_CL_SUPPORTED_SD;
-
-
-/* SDRAM/DDR information struct */
-typedef struct _gtMemoryDimmInfo {
-	MEMORY_TYPE memoryType;
-	unsigned int numOfRowAddresses;
-	unsigned int numOfColAddresses;
-	unsigned int numOfModuleBanks;
-	unsigned int dataWidth;
-	VOLTAGE_INTERFACE voltageInterface;
-	unsigned int errorCheckType;	/* ECC , PARITY.. */
-	unsigned int sdramWidth; /* 4,8,16 or 32 */ ;
-	unsigned int errorCheckDataWidth;	/* 0 - no, 1 - Yes */
-	unsigned int minClkDelay;
-	unsigned int burstLengthSupported;
-	unsigned int numOfBanksOnEachDevice;
-	unsigned int suportedCasLatencies;
-	unsigned int RefreshInterval;
-	unsigned int maxCASlatencySupported_LoP;	/* LoP left of point (measured in ns) */
-	unsigned int maxCASlatencySupported_RoP;	/* RoP right of point (measured in ns) */
-	MAX_CL_SUPPORTED_DDR maxClSupported_DDR;
-	MAX_CL_SUPPORTED_SD maxClSupported_SD;
-	unsigned int moduleBankDensity;
-	/* module attributes (true for yes) */
-	bool bufferedAddrAndControlInputs;
-	bool registeredAddrAndControlInputs;
-	bool onCardPLL;
-	bool bufferedDQMBinputs;
-	bool registeredDQMBinputs;
-	bool differentialClockInput;
-	bool redundantRowAddressing;
-
-	/* module general attributes */
-	bool suportedAutoPreCharge;
-	bool suportedPreChargeAll;
-	bool suportedEarlyRasPreCharge;
-	bool suportedWrite1ReadBurst;
-	bool suported5PercentLowVCC;
-	bool suported5PercentUpperVCC;
-	/* module timing parameters */
-	unsigned int minRasToCasDelay;
-	unsigned int minRowActiveRowActiveDelay;
-	unsigned int minRasPulseWidth;
-	unsigned int minRowPrechargeTime;	/* measured in ns */
-
-	int addrAndCommandHoldTime;	/* LoP left of point (measured in ns) */
-	int addrAndCommandSetupTime;	/* (measured in ns/100) */
-	int dataInputSetupTime; /* LoP left of point (measured in ns) */
-	int dataInputHoldTime;	/* LoP left of point (measured in ns) */
-/* tAC times for highest 2nd and 3rd highest CAS Latency values */
-	unsigned int clockToDataOut_LoP;	/* LoP left of point (measured in ns) */
-	unsigned int clockToDataOut_RoP;	/* RoP right of point (measured in ns) */
-	unsigned int clockToDataOutMinus1_LoP;	/* LoP left of point (measured in ns) */
-	unsigned int clockToDataOutMinus1_RoP;	/* RoP right of point (measured in ns) */
-	unsigned int clockToDataOutMinus2_LoP;	/* LoP left of point (measured in ns) */
-	unsigned int clockToDataOutMinus2_RoP;	/* RoP right of point (measured in ns) */
-
-	unsigned int minimumCycleTimeAtMaxCasLatancy_LoP;	/* LoP left of point (measured in ns) */
-	unsigned int minimumCycleTimeAtMaxCasLatancy_RoP;	/* RoP right of point (measured in ns) */
-
-	unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_LoP; /* LoP left of point (measured in ns) */
-	unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_RoP; /* RoP right of point (measured in ns) */
-
-	unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_LoP; /* LoP left of point (measured in ns) */
-	unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_RoP; /* RoP right of point (measured in ns) */
-
-	/* Parameters calculated from
-	   the extracted DIMM information */
-	unsigned int size;
-	unsigned int deviceDensity;	/* 16,64,128,256 or 512 Mbit */
-	unsigned int numberOfDevices;
-	uchar drb_size;		/* DRAM size in n*64Mbit */
-	uchar slot;		/* Slot Number this module is inserted in */
-	uchar spd_raw_data[128];	/* Content of SPD-EEPROM copied 1:1 */
-#ifdef DEBUG
-	uchar manufactura[8];	/* Content of SPD-EEPROM Byte 64-71 */
-	uchar modul_id[18];	/* Content of SPD-EEPROM Byte 73-90 */
-	uchar vendor_data[27];	/* Content of SPD-EEPROM Byte 99-125 */
-	unsigned long modul_serial_no;	/* Content of SPD-EEPROM Byte 95-98 */
-	unsigned int manufac_date;	/* Content of SPD-EEPROM Byte 93-94 */
-	unsigned int modul_revision;	/* Content of SPD-EEPROM Byte 91-92 */
-	uchar manufac_place;	/* Content of SPD-EEPROM Byte 72 */
-
-#endif
-} AUX_MEM_DIMM_INFO;
-
-
-/*
- * translate ns.ns/10 coding of SPD timing values
- * into 10 ps unit values
- */
-static inline unsigned short NS10to10PS (unsigned char spd_byte)
-{
-	unsigned short ns, ns10;
-
-	/* isolate upper nibble */
-	ns = (spd_byte >> 4) & 0x0F;
-	/* isolate lower nibble */
-	ns10 = (spd_byte & 0x0F);
-
-	return (ns * 100 + ns10 * 10);
-}
-
-/*
- * translate ns coding of SPD timing values
- * into 10 ps unit values
- */
-static inline unsigned short NSto10PS (unsigned char spd_byte)
-{
-	return (spd_byte * 100);
-}
-
-/* This code reads the SPD chip on the sdram and populates
- * the array which is passed in with the relevant information */
-/* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */
-static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
-{
-	unsigned long spd_checksum;
-
-#ifdef ZUMA_NTL
-	/* zero all the values */
-	memset (info, 0, sizeof (*info));
-
-/*
-	if (!slot) {
-	    info->slot = 0;
-	    info->banks = 1;
-	    info->registered = 0;
-		    info->drb_size = 16;*/ /* 16 - 256MBit, 32 - 512MBit */
-/*	    info->tpar = 3;
-	    info->tras_clocks = 5;
-	    info->burst_len = 4;
-*/
-#ifdef CONFIG_MV64360_ECC
-	/* check for ECC/parity [0 = none, 1 = parity, 2 = ecc] */
-	dimmInfo->errorCheckType = 2;
-/*	    info->ecc = 2;*/
-#endif
-}
-
-return 0;
-
-#else
-	uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR;
-	int ret;
-	unsigned int i, j, density = 1;
-
-#ifdef DEBUG
-	unsigned int k;
-#endif
-	unsigned int rightOfPoint = 0, leftOfPoint = 0, mult, div, time_tmp;
-	int sign = 1, shift, maskLeftOfPoint, maskRightOfPoint;
-	uchar supp_cal, cal_val;
-	ulong memclk, tmemclk;
-	ulong tmp;
-	uchar trp_clocks = 0, tras_clocks;
-	uchar data[128];
-
-	memclk = gd->bus_clk;
-	tmemclk = 1000000000 / (memclk / 100);	/* in 10 ps units */
-
-	debug("before i2c read\n");
-
-	ret = i2c_read (addr, 0, 1, data, 128);
-
-	debug("after i2c read\n");
-
-	/* zero all the values */
-	memset (dimmInfo, 0, sizeof (*dimmInfo));
-
-	/* copy the SPD content 1:1 into the dimmInfo structure */
-	for (i = 0; i <= 127; i++) {
-		dimmInfo->spd_raw_data[i] = data[i];
-	}
-
-	if (ret) {
-		debug("No DIMM in slot %d [err = %x]\n", slot, ret);
-		return 0;
-	} else
-		dimmInfo->slot = slot;	/* start to fill up dimminfo for this "slot" */
-
-#ifdef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT
-
-	for (i = 0; i <= 127; i++) {
-		printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i],
-			data[i]);
-	}
-
-#endif
-#ifdef DEBUG
-/* find Manufactura of Dimm Module */
-	for (i = 0; i < sizeof (dimmInfo->manufactura); i++) {
-		dimmInfo->manufactura[i] = data[64 + i];
-	}
-	printf ("\nThis RAM-Module is produced by:		%s\n",
-		dimmInfo->manufactura);
-
-/* find Manul-ID of Dimm Module */
-	for (i = 0; i < sizeof (dimmInfo->modul_id); i++) {
-		dimmInfo->modul_id[i] = data[73 + i];
-	}
-	printf ("The Module-ID of this RAM-Module is:		%s\n",
-		dimmInfo->modul_id);
-
-/* find Vendor-Data of Dimm Module */
-	for (i = 0; i < sizeof (dimmInfo->vendor_data); i++) {
-		dimmInfo->vendor_data[i] = data[99 + i];
-	}
-	printf ("Vendor Data of this RAM-Module is:		%s\n",
-		dimmInfo->vendor_data);
-
-/* find modul_serial_no of Dimm Module */
-	dimmInfo->modul_serial_no = (*((unsigned long *) (&data[95])));
-	printf ("Serial No. of this RAM-Module is:		%ld (%lx)\n",
-		dimmInfo->modul_serial_no, dimmInfo->modul_serial_no);
-
-/* find Manufac-Data of Dimm Module */
-	dimmInfo->manufac_date = (*((unsigned int *) (&data[93])));
-	printf ("Manufactoring Date of this RAM-Module is:	%d.%d\n", data[93], data[94]);	/*dimmInfo->manufac_date */
-
-/* find modul_revision of Dimm Module */
-	dimmInfo->modul_revision = (*((unsigned int *) (&data[91])));
-	printf ("Module Revision of this RAM-Module is:			%d.%d\n", data[91], data[92]);	/* dimmInfo->modul_revision */
-
-/* find manufac_place of Dimm Module */
-	dimmInfo->manufac_place = (*((unsigned char *) (&data[72])));
-	printf ("manufac_place of this RAM-Module is:		%d\n",
-		dimmInfo->manufac_place);
-
-#endif
-
-/*------------------------------------------------------------------------------------------------------------------------------*/
-/* calculate SPD checksum */
-/*------------------------------------------------------------------------------------------------------------------------------*/
-	spd_checksum = 0;
-
-	for (i = 0; i <= 62; i++) {
-		spd_checksum += data[i];
-	}
-
-	if ((spd_checksum & 0xff) != data[63]) {
-		printf ("### Error in SPD Checksum !!! Is_value: %2x should value %2x\n", (unsigned int) (spd_checksum & 0xff), data[63]);
-		hang ();
-	}
-
-	else
-		printf ("SPD Checksum ok!\n");
-
-
-/*------------------------------------------------------------------------------------------------------------------------------*/
-	for (i = 2; i <= 35; i++) {
-		switch (i) {
-		case 2: /* Memory type (DDR / SDRAM) */
-			dimmInfo->memoryType = (data[i] == 0x7) ? DDR : SDRAM;
-			if (dimmInfo->memoryType == 0)
-				debug
-				    ("Dram_type in slot %d is:			SDRAM\n",
-				     dimmInfo->slot);
-			if (dimmInfo->memoryType == 1)
-				debug
-				    ("Dram_type in slot %d is:			DDRAM\n",
-				     dimmInfo->slot);
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 3: /* Number Of Row Addresses */
-			dimmInfo->numOfRowAddresses = data[i];
-			debug
-			    ("Module Number of row addresses:		%d\n",
-			     dimmInfo->numOfRowAddresses);
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 4: /* Number Of Column Addresses */
-			dimmInfo->numOfColAddresses = data[i];
-			debug
-			    ("Module Number of col addresses:		%d\n",
-			     dimmInfo->numOfColAddresses);
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 5: /* Number Of Module Banks */
-			dimmInfo->numOfModuleBanks = data[i];
-			debug
-			    ("Number of Banks on Mod. :					%d\n",
-			     dimmInfo->numOfModuleBanks);
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 6: /* Data Width */
-			dimmInfo->dataWidth = data[i];
-			debug
-			    ("Module Data Width:				%d\n",
-			     dimmInfo->dataWidth);
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 8: /* Voltage Interface */
-			switch (data[i]) {
-			case 0x0:
-				dimmInfo->voltageInterface = TTL_5V_TOLERANT;
-				debug
-				    ("Module is						TTL_5V_TOLERANT\n");
-				break;
-			case 0x1:
-				dimmInfo->voltageInterface = LVTTL;
-				debug
-				    ("Module is						LVTTL\n");
-				break;
-			case 0x2:
-				dimmInfo->voltageInterface = HSTL_1_5V;
-				debug
-				    ("Module is						TTL_5V_TOLERANT\n");
-				break;
-			case 0x3:
-				dimmInfo->voltageInterface = SSTL_3_3V;
-				debug
-				    ("Module is						HSTL_1_5V\n");
-				break;
-			case 0x4:
-				dimmInfo->voltageInterface = SSTL_2_5V;
-				debug
-				    ("Module is						SSTL_2_5V\n");
-				break;
-			default:
-				dimmInfo->voltageInterface = VOLTAGE_UNKNOWN;
-				debug
-				    ("Module is						VOLTAGE_UNKNOWN\n");
-				break;
-			}
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 9: /* Minimum Cycle Time At Max CasLatancy */
-			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
-			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
-			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
-			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancy_LoP =
-				leftOfPoint;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancy_RoP =
-				rightOfPoint;
-			debug
-			    ("Minimum Cycle Time At Max CasLatancy:		%d.%d [ns]\n",
-			     leftOfPoint, rightOfPoint);
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 10:	/* Clock To Data Out */
-			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
-			time_tmp =
-				(((data[i] & 0xf0) >> 4) * 10) +
-				((data[i] & 0x0f));
-			leftOfPoint = time_tmp / div;
-			rightOfPoint = time_tmp % div;
-			dimmInfo->clockToDataOut_LoP = leftOfPoint;
-			dimmInfo->clockToDataOut_RoP = rightOfPoint;
-			debug("Clock To Data Out:					%d.%2d [ns]\n", leftOfPoint, rightOfPoint);	/*dimmInfo->clockToDataOut */
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-/*#ifdef CONFIG_ECC */
-		case 11:	/* Error Check Type */
-			dimmInfo->errorCheckType = data[i];
-			debug
-			    ("Error Check Type (0=NONE):			%d\n",
-			     dimmInfo->errorCheckType);
-			break;
-/* #endif */
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 12:	/* Refresh Interval */
-			dimmInfo->RefreshInterval = data[i];
-			debug
-			    ("RefreshInterval (80= Self refresh Normal, 15.625us) : %x\n",
-			     dimmInfo->RefreshInterval);
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 13:	/* Sdram Width */
-			dimmInfo->sdramWidth = data[i];
-			debug
-			    ("Sdram Width:					%d\n",
-			     dimmInfo->sdramWidth);
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 14:	/* Error Check Data Width */
-			dimmInfo->errorCheckDataWidth = data[i];
-			debug
-			    ("Error Check Data Width:			%d\n",
-			     dimmInfo->errorCheckDataWidth);
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 15:	/* Minimum Clock Delay */
-			dimmInfo->minClkDelay = data[i];
-			debug
-			    ("Minimum Clock Delay:				%d\n",
-			     dimmInfo->minClkDelay);
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 16:	/* Burst Length Supported */
-			   /******-******-******-*******
-			   * bit3 | bit2 | bit1 | bit0 *
-			   *******-******-******-*******
-	    burst length = *  8	  |  4	 |   2	|   1  *
-			   *****************************
-
-	    If for example bit0 and bit2 are set, the burst
-	    length supported are 1 and 4. */
-
-			dimmInfo->burstLengthSupported = data[i];
-#ifdef DEBUG
-			debug
-			    ("Burst Length Supported:			");
-			if (dimmInfo->burstLengthSupported & 0x01)
-				debug("1, ");
-			if (dimmInfo->burstLengthSupported & 0x02)
-				debug("2, ");
-			if (dimmInfo->burstLengthSupported & 0x04)
-				debug("4, ");
-			if (dimmInfo->burstLengthSupported & 0x08)
-				debug("8, ");
-			debug(" Bit \n");
-#endif
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 17:	/* Number Of Banks On Each Device */
-			dimmInfo->numOfBanksOnEachDevice = data[i];
-			debug
-			    ("Number Of Banks On Each Chip:			%d\n",
-			     dimmInfo->numOfBanksOnEachDevice);
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 18:	/* Suported Cas Latencies */
-
-			/*     DDR:
-			 *******-******-******-******-******-******-******-*******
-			 * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
-			 *******-******-******-******-******-******-******-*******
-			 CAS =	 * TBD	| TBD  | 3.5  |	  3  | 2.5  |  2   | 1.5  |   1	 *
-			 *********************************************************
-			 SDRAM:
-			 *******-******-******-******-******-******-******-*******
-			 * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
-			 *******-******-******-******-******-******-******-*******
-			 CAS =	 * TBD	|  7   |  6   |	 5   |	4   |  3   |   2  |   1	 *
-			 ********************************************************/
-			dimmInfo->suportedCasLatencies = data[i];
-#ifdef DEBUG
-			debug
-			    ("Suported Cas Latencies: (CL)			");
-			if (dimmInfo->memoryType == 0) {	/* SDRAM */
-				for (k = 0; k <= 7; k++) {
-					if (dimmInfo->
-					    suportedCasLatencies & (1 << k))
-						debug
-						    ("%d,			",
-						     k + 1);
-				}
-
-			} else {	/* DDR-RAM */
-
-				if (dimmInfo->suportedCasLatencies & 1)
-					debug("1, ");
-				if (dimmInfo->suportedCasLatencies & 2)
-					debug("1.5, ");
-				if (dimmInfo->suportedCasLatencies & 4)
-					debug("2, ");
-				if (dimmInfo->suportedCasLatencies & 8)
-					debug("2.5, ");
-				if (dimmInfo->suportedCasLatencies & 16)
-					debug("3, ");
-				if (dimmInfo->suportedCasLatencies & 32)
-					debug("3.5, ");
-
-			}
-			debug("\n");
-#endif
-			/* Calculating MAX CAS latency */
-			for (j = 7; j > 0; j--) {
-				if (((dimmInfo->
-				      suportedCasLatencies >> j) & 0x1) ==
-				    1) {
-					switch (dimmInfo->memoryType) {
-					case DDR:
-						/* CAS latency 1, 1.5, 2, 2.5, 3, 3.5 */
-						switch (j) {
-						case 7:
-							debug
-							    ("Max. Cas Latencies (DDR):				ERROR !!!\n");
-							dimmInfo->
-								maxClSupported_DDR
-								=
-								DDR_CL_FAULT;
-							hang ();
-							break;
-						case 6:
-							debug
-							    ("Max. Cas Latencies (DDR):				ERROR !!!\n");
-							dimmInfo->
-								maxClSupported_DDR
-								=
-								DDR_CL_FAULT;
-							hang ();
-							break;
-						case 5:
-							debug
-							    ("Max. Cas Latencies (DDR):				3.5 clk's\n");
-							dimmInfo->
-								maxClSupported_DDR
-								= DDR_CL_3_5;
-							break;
-						case 4:
-							debug
-							    ("Max. Cas Latencies (DDR):				3 clk's \n");
-							dimmInfo->
-								maxClSupported_DDR
-								= DDR_CL_3;
-							break;
-						case 3:
-							debug
-							    ("Max. Cas Latencies (DDR):				2.5 clk's \n");
-							dimmInfo->
-								maxClSupported_DDR
-								= DDR_CL_2_5;
-							break;
-						case 2:
-							debug
-							    ("Max. Cas Latencies (DDR):				2 clk's \n");
-							dimmInfo->
-								maxClSupported_DDR
-								= DDR_CL_2;
-							break;
-						case 1:
-							debug
-							    ("Max. Cas Latencies (DDR):				1.5 clk's \n");
-							dimmInfo->
-								maxClSupported_DDR
-								= DDR_CL_1_5;
-							break;
-						}
-
-						/* ronen - in case we have a DIMM with minimumCycleTimeAtMaxCasLatancy
-						   lower then our SDRAM cycle count, we won't be able to support this CAL
-						   and we will have to use lower CAL. (minus - means from 3.0 to 2.5) */
-						if ((dimmInfo->
-						     minimumCycleTimeAtMaxCasLatancy_LoP
-						     <
-						     CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
-						    ||
-						    ((dimmInfo->
-						      minimumCycleTimeAtMaxCasLatancy_LoP
-						      ==
-						      CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
-						     && (dimmInfo->
-							 minimumCycleTimeAtMaxCasLatancy_RoP
-							 <
-							 CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
-						{
-							dimmInfo->
-								maxClSupported_DDR
-								=
-								dimmInfo->
-								maxClSupported_DDR
-								>> 1;
-							debug
-							    ("*** Change actual Cas Latencies cause of minimumCycleTime n");
-						}
-						/* ronen - checkif the Dimm frequency compared to the Sysclock. */
-						if ((dimmInfo->
-						     minimumCycleTimeAtMaxCasLatancy_LoP
-						     >
-						     CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
-						    ||
-						    ((dimmInfo->
-						      minimumCycleTimeAtMaxCasLatancy_LoP
-						      ==
-						      CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
-						     && (dimmInfo->
-							 minimumCycleTimeAtMaxCasLatancy_RoP
-							 >
-							 CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
-						{
-							printf ("*********************************************************\n");
-							printf ("*** sysClock is higher than SDRAM's allowed frequency ***\n");
-							printf ("*********************************************************\n");
-							hang ();
-						}
-
-						dimmInfo->
-							maxCASlatencySupported_LoP
-							=
-							1 +
-							(int) (5 * j / 10);
-						if (((5 * j) % 10) != 0)
-							dimmInfo->
-								maxCASlatencySupported_RoP
-								= 5;
-						else
-							dimmInfo->
-								maxCASlatencySupported_RoP
-								= 0;
-						debug
-						    ("Max. Cas Latencies (DDR LoP.RoP Notation):	%d.%d \n",
-						     dimmInfo->
-						     maxCASlatencySupported_LoP,
-						     dimmInfo->
-						     maxCASlatencySupported_RoP);
-						break;
-					case SDRAM:
-						/* CAS latency 1, 2, 3, 4, 5, 6, 7 */
-						dimmInfo->maxClSupported_SD = j;	/*  Cas Latency DDR-RAM Coded			*/
-						debug
-						    ("Max. Cas Latencies (SD): %d\n",
-						     dimmInfo->
-						     maxClSupported_SD);
-						dimmInfo->
-							maxCASlatencySupported_LoP
-							= j;
-						dimmInfo->
-							maxCASlatencySupported_RoP
-							= 0;
-						debug
-						    ("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n",
-						     dimmInfo->
-						     maxCASlatencySupported_LoP,
-						     dimmInfo->
-						     maxCASlatencySupported_RoP);
-						break;
-					}
-					break;
-				}
-			}
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 21:	/* Buffered Address And Control Inputs */
-			debug("\nModul Attributes (SPD Byte 21): \n");
-			dimmInfo->bufferedAddrAndControlInputs =
-				data[i] & BIT0;
-			dimmInfo->registeredAddrAndControlInputs =
-				(data[i] & BIT1) >> 1;
-			dimmInfo->onCardPLL = (data[i] & BIT2) >> 2;
-			dimmInfo->bufferedDQMBinputs = (data[i] & BIT3) >> 3;
-			dimmInfo->registeredDQMBinputs =
-				(data[i] & BIT4) >> 4;
-			dimmInfo->differentialClockInput =
-				(data[i] & BIT5) >> 5;
-			dimmInfo->redundantRowAddressing =
-				(data[i] & BIT6) >> 6;
-#ifdef DEBUG
-			if (dimmInfo->bufferedAddrAndControlInputs == 1)
-				debug
-				    (" - Buffered Address/Control Input:		Yes \n");
-			else
-				debug
-				    (" - Buffered Address/Control Input:		No \n");
-
-			if (dimmInfo->registeredAddrAndControlInputs == 1)
-				debug
-				    (" - Registered Address/Control Input:		Yes \n");
-			else
-				debug
-				    (" - Registered Address/Control Input:		No \n");
-
-			if (dimmInfo->onCardPLL == 1)
-				debug
-				    (" - On-Card PLL (clock):				Yes \n");
-			else
-				debug
-				    (" - On-Card PLL (clock):				No \n");
-
-			if (dimmInfo->bufferedDQMBinputs == 1)
-				debug
-				    (" - Bufferd DQMB Inputs:				Yes \n");
-			else
-				debug
-				    (" - Bufferd DQMB Inputs:				No \n");
-
-			if (dimmInfo->registeredDQMBinputs == 1)
-				debug
-				    (" - Registered DQMB Inputs:			Yes \n");
-			else
-				debug
-				    (" - Registered DQMB Inputs:			No \n");
-
-			if (dimmInfo->differentialClockInput == 1)
-				debug
-				    (" - Differential Clock Input:			Yes \n");
-			else
-				debug
-				    (" - Differential Clock Input:			No \n");
-
-			if (dimmInfo->redundantRowAddressing == 1)
-				debug
-				    (" - redundant Row Addressing:			Yes \n");
-			else
-				debug
-				    (" - redundant Row Addressing:			No \n");
-
-#endif
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 22:	/* Suported AutoPreCharge */
-			debug("\nModul Attributes (SPD Byte 22): \n");
-			dimmInfo->suportedEarlyRasPreCharge = data[i] & BIT0;
-			dimmInfo->suportedAutoPreCharge =
-				(data[i] & BIT1) >> 1;
-			dimmInfo->suportedPreChargeAll =
-				(data[i] & BIT2) >> 2;
-			dimmInfo->suportedWrite1ReadBurst =
-				(data[i] & BIT3) >> 3;
-			dimmInfo->suported5PercentLowVCC =
-				(data[i] & BIT4) >> 4;
-			dimmInfo->suported5PercentUpperVCC =
-				(data[i] & BIT5) >> 5;
-#ifdef DEBUG
-			if (dimmInfo->suportedEarlyRasPreCharge == 1)
-				debug
-				    (" - Early Ras Precharge:			Yes \n");
-			else
-				debug
-				    (" -  Early Ras Precharge:			No \n");
-
-			if (dimmInfo->suportedAutoPreCharge == 1)
-				debug
-				    (" - AutoPreCharge:				Yes \n");
-			else
-				debug
-				    (" -  AutoPreCharge:				No \n");
-
-			if (dimmInfo->suportedPreChargeAll == 1)
-				debug
-				    (" - Precharge All:				Yes \n");
-			else
-				debug
-				    (" -  Precharge All:				No \n");
-
-			if (dimmInfo->suportedWrite1ReadBurst == 1)
-				debug
-				    (" - Write 1/ReadBurst:				Yes \n");
-			else
-				debug
-				    (" -  Write 1/ReadBurst:				No \n");
-
-			if (dimmInfo->suported5PercentLowVCC == 1)
-				debug
-				    (" - lower VCC tolerance:			5 Percent \n");
-			else
-				debug
-				    ("	- lower VCC tolerance:			10 Percent \n");
-
-			if (dimmInfo->suported5PercentUpperVCC == 1)
-				debug
-				    (" - upper VCC tolerance:			5 Percent \n");
-			else
-				debug
-				    (" -  upper VCC tolerance:			10 Percent \n");
-
-#endif
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 23:	/* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */
-			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
-			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
-			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
-			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_LoP =
-				leftOfPoint;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_RoP =
-				rightOfPoint;
-			debug("Minimum Cycle Time At 2nd highest CasLatancy (0 = Not supported): %d.%d [ns]\n", leftOfPoint, rightOfPoint);	/*dimmInfo->minimumCycleTimeAtMaxCasLatancy */
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 24:	/* Clock To Data Out 2nd highest Cas Latency Value */
-			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
-			time_tmp =
-				(((data[i] & 0xf0) >> 4) * 10) +
-				((data[i] & 0x0f));
-			leftOfPoint = time_tmp / div;
-			rightOfPoint = time_tmp % div;
-			dimmInfo->clockToDataOutMinus1_LoP = leftOfPoint;
-			dimmInfo->clockToDataOutMinus1_RoP = rightOfPoint;
-			debug
-			    ("Clock To Data Out (2nd CL value):			%d.%2d [ns]\n",
-			     leftOfPoint, rightOfPoint);
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 25:	/* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */
-			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
-			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
-			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
-			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_LoP =
-				leftOfPoint;
-			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_RoP =
-				rightOfPoint;
-			debug("Minimum Cycle Time At 3rd highest CasLatancy (0 = Not supported): %d.%d [ns]\n", leftOfPoint, rightOfPoint);	/*dimmInfo->minimumCycleTimeAtMaxCasLatancy */
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 26:	/* Clock To Data Out 3rd highest Cas Latency Value */
-			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
-			time_tmp =
-				(((data[i] & 0xf0) >> 4) * 10) +
-				((data[i] & 0x0f));
-			leftOfPoint = time_tmp / div;
-			rightOfPoint = time_tmp % div;
-			dimmInfo->clockToDataOutMinus2_LoP = leftOfPoint;
-			dimmInfo->clockToDataOutMinus2_RoP = rightOfPoint;
-			debug
-			    ("Clock To Data Out (3rd CL value):			%d.%2d [ns]\n",
-			     leftOfPoint, rightOfPoint);
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 27:	/* Minimum Row Precharge Time */
-			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
-			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
-			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
-
-			dimmInfo->minRowPrechargeTime = ((leftOfPoint * 100) + rightOfPoint);	/* measured in n times 10ps Intervals */
-			trp_clocks =
-				(dimmInfo->minRowPrechargeTime +
-				 (tmemclk - 1)) / tmemclk;
-			debug
-			    ("*** 1 clock cycle = %ld  10ps intervalls = %ld.%ld ns****\n",
-			     tmemclk, tmemclk / 100, tmemclk % 100);
-			debug
-			    ("Minimum Row Precharge Time [ns]:		%d.%2d = in Clk cycles %d\n",
-			     leftOfPoint, rightOfPoint, trp_clocks);
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 28:	/* Minimum Row Active to Row Active Time */
-			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
-			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
-			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
-
-			dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint * 100) + rightOfPoint);	/* measured in 100ns Intervals */
-			debug
-			    ("Minimum Row Active -To- Row Active Delay [ns]:	%d.%2d = in Clk cycles %d\n",
-			     leftOfPoint, rightOfPoint, trp_clocks);
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 29:	/* Minimum Ras-To-Cas Delay */
-			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
-			maskLeftOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
-			maskRightOfPoint =
-				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
-			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
-			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
-
-			dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint * 100) + rightOfPoint);	/* measured in 100ns Intervals */
-			debug
-			    ("Minimum Ras-To-Cas Delay [ns]:			%d.%2d = in Clk cycles %d\n",
-			     leftOfPoint, rightOfPoint, trp_clocks);
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 30:	/* Minimum Ras Pulse Width */
-			dimmInfo->minRasPulseWidth = data[i];
-			tras_clocks =
-				(NSto10PS (data[i]) +
-				 (tmemclk - 1)) / tmemclk;
-			debug
-			    ("Minimum Ras Pulse Width [ns]:			%d = in Clk cycles %d\n",
-			     dimmInfo->minRasPulseWidth, tras_clocks);
-
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 31:	/* Module Bank Density */
-			dimmInfo->moduleBankDensity = data[i];
-			debug
-			    ("Module Bank Density:				%d\n",
-			     dimmInfo->moduleBankDensity);
-#ifdef DEBUG
-			debug
-			    ("*** Offered Densities (more than 1 = Multisize-Module): ");
-			{
-				if (dimmInfo->moduleBankDensity & 1)
-					debug("4MB, ");
-				if (dimmInfo->moduleBankDensity & 2)
-					debug("8MB, ");
-				if (dimmInfo->moduleBankDensity & 4)
-					debug("16MB, ");
-				if (dimmInfo->moduleBankDensity & 8)
-					debug("32MB, ");
-				if (dimmInfo->moduleBankDensity & 16)
-					debug("64MB, ");
-				if (dimmInfo->moduleBankDensity & 32)
-					debug("128MB, ");
-				if ((dimmInfo->moduleBankDensity & 64)
-				    || (dimmInfo->moduleBankDensity & 128)) {
-					debug("ERROR, ");
-					hang ();
-				}
-			}
-			debug("\n");
-#endif
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 32:	/* Address And Command Setup Time (measured in ns/1000) */
-			sign = 1;
-			switch (dimmInfo->memoryType) {
-			case DDR:
-				time_tmp =
-					(((data[i] & 0xf0) >> 4) * 10) +
-					((data[i] & 0x0f));
-				leftOfPoint = time_tmp / 100;
-				rightOfPoint = time_tmp % 100;
-				break;
-			case SDRAM:
-				leftOfPoint = (data[i] & 0xf0) >> 4;
-				if (leftOfPoint > 7) {
-					leftOfPoint = data[i] & 0x70 >> 4;
-					sign = -1;
-				}
-				rightOfPoint = (data[i] & 0x0f);
-				break;
-			}
-			dimmInfo->addrAndCommandSetupTime =
-				(leftOfPoint * 100 + rightOfPoint) * sign;
-			debug
-			    ("Address And Command Setup Time [ns]:		%d.%d\n",
-			     sign * leftOfPoint, rightOfPoint);
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 33:	/* Address And Command Hold Time */
-			sign = 1;
-			switch (dimmInfo->memoryType) {
-			case DDR:
-				time_tmp =
-					(((data[i] & 0xf0) >> 4) * 10) +
-					((data[i] & 0x0f));
-				leftOfPoint = time_tmp / 100;
-				rightOfPoint = time_tmp % 100;
-				break;
-			case SDRAM:
-				leftOfPoint = (data[i] & 0xf0) >> 4;
-				if (leftOfPoint > 7) {
-					leftOfPoint = data[i] & 0x70 >> 4;
-					sign = -1;
-				}
-				rightOfPoint = (data[i] & 0x0f);
-				break;
-			}
-			dimmInfo->addrAndCommandHoldTime =
-				(leftOfPoint * 100 + rightOfPoint) * sign;
-			debug
-			    ("Address And Command Hold Time [ns]:		%d.%d\n",
-			     sign * leftOfPoint, rightOfPoint);
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 34:	/* Data Input Setup Time */
-			sign = 1;
-			switch (dimmInfo->memoryType) {
-			case DDR:
-				time_tmp =
-					(((data[i] & 0xf0) >> 4) * 10) +
-					((data[i] & 0x0f));
-				leftOfPoint = time_tmp / 100;
-				rightOfPoint = time_tmp % 100;
-				break;
-			case SDRAM:
-				leftOfPoint = (data[i] & 0xf0) >> 4;
-				if (leftOfPoint > 7) {
-					leftOfPoint = data[i] & 0x70 >> 4;
-					sign = -1;
-				}
-				rightOfPoint = (data[i] & 0x0f);
-				break;
-			}
-			dimmInfo->dataInputSetupTime =
-				(leftOfPoint * 100 + rightOfPoint) * sign;
-			debug
-			    ("Data Input Setup Time [ns]:			%d.%d\n",
-			     sign * leftOfPoint, rightOfPoint);
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-
-		case 35:	/* Data Input Hold Time */
-			sign = 1;
-			switch (dimmInfo->memoryType) {
-			case DDR:
-				time_tmp =
-					(((data[i] & 0xf0) >> 4) * 10) +
-					((data[i] & 0x0f));
-				leftOfPoint = time_tmp / 100;
-				rightOfPoint = time_tmp % 100;
-				break;
-			case SDRAM:
-				leftOfPoint = (data[i] & 0xf0) >> 4;
-				if (leftOfPoint > 7) {
-					leftOfPoint = data[i] & 0x70 >> 4;
-					sign = -1;
-				}
-				rightOfPoint = (data[i] & 0x0f);
-				break;
-			}
-			dimmInfo->dataInputHoldTime =
-				(leftOfPoint * 100 + rightOfPoint) * sign;
-			debug
-			    ("Data Input Hold Time [ns]:			%d.%d\n\n",
-			     sign * leftOfPoint, rightOfPoint);
-			break;
-/*------------------------------------------------------------------------------------------------------------------------------*/
-		}
-	}
-	/* calculating the sdram density */
-	for (i = 0;
-	     i < dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses;
-	     i++) {
-		density = density * 2;
-	}
-	dimmInfo->deviceDensity = density * dimmInfo->numOfBanksOnEachDevice *
-		dimmInfo->sdramWidth;
-	dimmInfo->numberOfDevices =
-		(dimmInfo->dataWidth / dimmInfo->sdramWidth) *
-		dimmInfo->numOfModuleBanks;
-	if ((dimmInfo->errorCheckType == 0x1)
-	    || (dimmInfo->errorCheckType == 0x2)
-	    || (dimmInfo->errorCheckType == 0x3)) {
-		dimmInfo->size =
-			(dimmInfo->deviceDensity / 8) *
-			(dimmInfo->numberOfDevices -
-			 /* ronen on the 1G dimm we get wrong value. (was devicesForErrCheck) */
-			 dimmInfo->numberOfDevices / 8);
-	} else {
-		dimmInfo->size =
-			(dimmInfo->deviceDensity / 8) *
-			dimmInfo->numberOfDevices;
-	}
-
-	/* compute the module DRB size */
-	tmp = (1 <<
-	       (dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses));
-	tmp *= dimmInfo->numOfModuleBanks;
-	tmp *= dimmInfo->sdramWidth;
-	tmp = tmp >> 24;	/* div by 0x4000000 (64M)	*/
-	dimmInfo->drb_size = (uchar) tmp;
-	debug("Module DRB size (n*64Mbit): %d\n", dimmInfo->drb_size);
-
-	/* try a CAS latency of 3 first... */
-
-	/* bit 1 is CL2, bit 2 is CL3 */
-	supp_cal = (dimmInfo->suportedCasLatencies & 0x6) >> 1;
-
-	cal_val = 0;
-	if (supp_cal & 3) {
-		if (NS10to10PS (data[9]) <= tmemclk)
-			cal_val = 3;
-	}
-
-	/* then 2... */
-	if (supp_cal & 2) {
-		if (NS10to10PS (data[23]) <= tmemclk)
-			cal_val = 2;
-	}
-
-	debug("cal_val = %d\n", cal_val);
-
-	/* bummer, did't work... */
-	if (cal_val == 0) {
-		debug("Couldn't find a good CAS latency\n");
-		hang ();
-		return 0;
-	}
-
-	return true;
-
-#endif
-}
-
-/* sets up the GT properly with information passed in */
-int setup_sdram (AUX_MEM_DIMM_INFO * info)
-{
-	ulong tmp, check;
-	ulong tmp_sdram_mode = 0;	/* 0x141c */
-	ulong tmp_dunit_control_low = 0;	/* 0x1404 */
-	int i;
-
-	/* added 8/21/2003 P. Marchese */
-	unsigned int sdram_config_reg;
-
-	/* added 10/10/2003 P. Marchese */
-	ulong sdram_chip_size;
-
-	/* sanity checking */
-	if (!info->numOfModuleBanks) {
-		printf ("setup_sdram called with 0 banks\n");
-		return 1;
-	}
-
-	/* delay line */
-	set_dfcdlInit ();	/* may be its not needed */
-	debug("Delay line set done\n");
-
-	/* set SDRAM mode NOP */ /* To_do check it */
-	GT_REG_WRITE (SDRAM_OPERATION, 0x5);
-	while (GTREGREAD (SDRAM_OPERATION) != 0) {
-		debug
-		    ("\n*** SDRAM_OPERATION 1418: Module still busy ... please wait... ***\n");
-	}
-
-	/* SDRAM configuration */
-/* added 8/21/2003 P. Marchese */
-/* code allows usage of registered DIMMS */
-
-	/* figure out the memory refresh internal */
-	switch (info->RefreshInterval) {
-	case 0x0:
-	case 0x80:		/* refresh period is 15.625 usec */
-		sdram_config_reg =
-			(unsigned int) (((float) 15.625 * (float) CONFIG_SYS_BUS_CLK)
-					/ (float) 1000000.0);
-		break;
-	case 0x1:
-	case 0x81:		/* refresh period is 3.9 usec */
-		sdram_config_reg =
-			(unsigned int) (((float) 3.9 * (float) CONFIG_SYS_BUS_CLK) /
-					(float) 1000000.0);
-		break;
-	case 0x2:
-	case 0x82:		/* refresh period is 7.8 usec */
-		sdram_config_reg =
-			(unsigned int) (((float) 7.8 * (float) CONFIG_SYS_BUS_CLK) /
-					(float) 1000000.0);
-		break;
-	case 0x3:
-	case 0x83:		/* refresh period is 31.3 usec */
-		sdram_config_reg =
-			(unsigned int) (((float) 31.3 * (float) CONFIG_SYS_BUS_CLK) /
-					(float) 1000000.0);
-		break;
-	case 0x4:
-	case 0x84:		/* refresh period is 62.5 usec */
-		sdram_config_reg =
-			(unsigned int) (((float) 62.5 * (float) CONFIG_SYS_BUS_CLK) /
-					(float) 1000000.0);
-		break;
-	case 0x5:
-	case 0x85:		/* refresh period is 125 usec */
-		sdram_config_reg =
-			(unsigned int) (((float) 125 * (float) CONFIG_SYS_BUS_CLK) /
-					(float) 1000000.0);
-		break;
-	default:		/* refresh period undefined */
-		printf ("DRAM refresh period is unknown!\n");
-		printf ("Aborting DRAM setup with an error\n");
-		hang ();
-		break;
-	}
-	debug("calculated refresh interval %0x\n", sdram_config_reg);
-
-	/* make sure the refresh value is only 14 bits */
-	if (sdram_config_reg > 0x1fff)
-		sdram_config_reg = 0x1fff;
-	debug("adjusted refresh interval %0x\n", sdram_config_reg);
-
-	/* we want physical bank interleaving and */
-	/* virtual bank interleaving enabled so do nothing */
-	/* since these bits need to be zero to enable the interleaving */
-
-	/*  registered DRAM ? */
-	if (info->registeredAddrAndControlInputs == 1) {
-		/* it's registered DRAM, so set the reg. DRAM bit */
-		sdram_config_reg = sdram_config_reg | BIT17;
-		debug("Enabling registered DRAM bit\n");
-	}
-	/* turn on DRAM ECC? */
-#ifdef CONFIG_MV64360_ECC
-	if (info->errorCheckType == 0x2) {
-		/* DRAM has ECC, so turn it on */
-		sdram_config_reg = sdram_config_reg | BIT18;
-		debug("Enabling ECC\n");
-	}
-#endif
-	/* set the data DQS pin configuration */
-	switch (info->sdramWidth) {
-	case 0x4:		/* memory is x4 */
-		sdram_config_reg = sdram_config_reg | BIT20 | BIT21;
-		debug("Data DQS pins set for 16 pins\n");
-		break;
-	case 0x8:		/* memory is x8 or x16 */
-	case 0x10:
-		sdram_config_reg = sdram_config_reg | BIT21;
-		debug("Data DQS pins set for 8 pins\n");
-		break;
-	case 0x20:		/* memory is x32 */
-		/* both bits are cleared for x32 so nothing to do */
-		debug("Data DQS pins set for 2 pins\n");
-		break;
-	default:		/* memory width unsupported */
-		printf ("DRAM chip width is unknown!\n");
-		printf ("Aborting DRAM setup with an error\n");
-		hang ();
-		break;
-	}
-
-	/* perform read buffer assignments */
-	/* we are going to use the Power-up defaults */
-	/* bit 26 = CPU = buffer 1 */
-	/* bit 27 = PCI bus #0 = buffer 0 */
-	/* bit 28 = PCI bus #1 = buffer 0 */
-	/* bit 29 = MPSC = buffer 0 */
-	/* bit 30 = IDMA = buffer 0 */
-	/* bit 31 = Gigabit = buffer 0 */
-	sdram_config_reg = sdram_config_reg | BIT26;
-	/*  sdram_config_reg = sdram_config_reg | 0x58000000; */
-	/* sdram_config_reg = sdram_config_reg & 0xffffff00;  */
-
-	/* write the value into the SDRAM configuration register */
-	GT_REG_WRITE (SDRAM_CONFIG, sdram_config_reg);
-	debug
-	    ("OOOOOOOOO sdram_conf 0x1400: %08x\n",
-	     GTREGREAD (SDRAM_CONFIG));
-
-	/* SDRAM open pages control keep open as much as I can */
-	GT_REG_WRITE (SDRAM_OPEN_PAGES_CONTROL, 0x0);
-	debug
-	    ("sdram_open_pages_controll 0x1414: %08x\n",
-	     GTREGREAD (SDRAM_OPEN_PAGES_CONTROL));
-
-	/* SDRAM D_UNIT_CONTROL_LOW 0x1404 */
-	tmp = (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x01);	/* Clock Domain Sync from power on reset */
-	if (tmp == 0)
-		debug("Core Signals are sync (by HW-Setting)!!!\n");
-	else
-		debug
-		    ("Core Signals syncs. are bypassed (by HW-Setting)!!!\n");
-
-	/* SDRAM set CAS Latency according to SPD information */
-	switch (info->memoryType) {
-	case SDRAM:
-		printf ("### SD-RAM not supported !!!\n");
-		printf ("Aborting!!!\n");
-		hang ();
-		/* ToDo fill SD-RAM if needed !!!!! */
-		break;
-		/* Calculate the settings for SDRAM mode and Dunit control low registers */
-		/* Values set according to technical bulletin TB-92 rev. c */
-	case DDR:
-		debug("### SET-CL for DDR-RAM\n");
-		switch (info->maxClSupported_DDR) {
-		case DDR_CL_3:
-			tmp_sdram_mode = 0x32;	/* CL=3 Burstlength = 4 */
-			if (tmp == 1) { /* clocks sync */
-				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
-					tmp_dunit_control_low = 0x05110051;
-				else
-					tmp_dunit_control_low = 0x24110051;
-				debug
-				    ("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low);
-			} else {	/* clk sync. bypassed	*/
-
-				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
-					tmp_dunit_control_low = 0x2C1107F2;
-				else
-					tmp_dunit_control_low = 0x3C1107d2;
-				debug
-				    ("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low);
-			}
-			break;
-		case DDR_CL_2_5:
-			tmp_sdram_mode = 0x62;	/* CL=2.5 Burstlength = 4 */
-			if (tmp == 1) { /* clocks sync */
-				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
-					tmp_dunit_control_low = 0x25110051;
-				else
-					tmp_dunit_control_low = 0x24110051;
-				debug
-				    ("Max. CL is 2.5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low);
-			} else {	/* clk sync. bypassed	*/
-
-				if (info->registeredAddrAndControlInputs == 1) {	/* registerd DDR SDRAM? */
-					printf ("CL = 2.5, Clock Unsync'ed, Dunit Control Low register setting undefined\n");
-					printf ("Aborting!!!\n");
-					hang ();
-				} else
-					tmp_dunit_control_low = 0x1B1107d2;
-				debug
-				    ("Max. CL is 2.5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low);
-			}
-			break;
-		case DDR_CL_2:
-			tmp_sdram_mode = 0x22;	/* CL=2 Burstlength = 4 */
-			if (tmp == 1) { /* clocks sync */
-				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
-					tmp_dunit_control_low = 0x04110051;
-				else
-					tmp_dunit_control_low = 0x03110051;
-				debug
-				    ("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low);
-			} else {	/* clk sync. bypassed	*/
-
-				if (info->registeredAddrAndControlInputs == 1) {	/* registerd DDR SDRAM? */
-					printf ("CL = 2, Clock Unsync'ed, Dunit Control Low register setting undefined\n");
-					printf ("Aborting!!!\n");
-					hang ();
-				} else
-					tmp_dunit_control_low = 0x3B1107d2;
-				debug
-				    ("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low);
-			}
-			break;
-		case DDR_CL_1_5:
-			tmp_sdram_mode = 0x52;	/* CL=1.5 Burstlength = 4 */
-			if (tmp == 1) { /* clocks sync */
-				if (info->registeredAddrAndControlInputs == 1)	/* registerd DDR SDRAM? */
-					tmp_dunit_control_low = 0x24110051;
-				else
-					tmp_dunit_control_low = 0x23110051;
-				debug
-				    ("Max. CL is 1.5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low);
-			} else {	/* clk sync. bypassed	*/
-
-				if (info->registeredAddrAndControlInputs == 1) {	/* registerd DDR SDRAM? */
-					printf ("CL = 1.5, Clock Unsync'ed, Dunit Control Low register setting undefined\n");
-					printf ("Aborting!!!\n");
-					hang ();
-				} else
-					tmp_dunit_control_low = 0x1A1107d2;
-				debug
-				    ("Max. CL is 1.5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
-				     tmp_sdram_mode, tmp_dunit_control_low);
-			}
-			break;
-
-		default:
-			printf ("Max. CL is out of range %d\n",
-				info->maxClSupported_DDR);
-			hang ();
-			break;
-		}		/* end DDR switch */
-		break;
-	}			/* end CL switch */
-
-	/* Write results of CL detection procedure */
-	/* set SDRAM mode reg. 0x141c */
-	GT_REG_WRITE (SDRAM_MODE, tmp_sdram_mode);
-
-	/* set SDRAM mode SetCommand 0x1418 */
-	GT_REG_WRITE (SDRAM_OPERATION, 0x3);
-	while (GTREGREAD (SDRAM_OPERATION) != 0) {
-		debug
-		    ("\n*** SDRAM_OPERATION 0x1418 after SDRAM_MODE: Module still busy ... please wait... ***\n");
-	}
-
-	/* SDRAM D_UNIT_CONTROL_LOW 0x1404 */
-	GT_REG_WRITE (D_UNIT_CONTROL_LOW, tmp_dunit_control_low);
-
-	/* set SDRAM mode SetCommand 0x1418 */
-	GT_REG_WRITE (SDRAM_OPERATION, 0x3);
-	while (GTREGREAD (SDRAM_OPERATION) != 0) {
-		debug
-		    ("\n*** SDRAM_OPERATION 1418 after D_UNIT_CONTROL_LOW: Module still busy ... please wait... ***\n");
-	}
-
-/*------------------------------------------------------------------------------ */
-
-	/* bank parameters */
-	/* SDRAM address decode register 0x1410 */
-	/* program this with the default value */
-	tmp = 0x02;		/* power-up default address select decoding value */
-
-	debug("drb_size (n*64Mbit): %d\n", info->drb_size);
-/* figure out the DRAM chip size */
-	sdram_chip_size =
-		(1 << (info->numOfRowAddresses + info->numOfColAddresses));
-	sdram_chip_size *= info->sdramWidth;
-	sdram_chip_size *= 4;
-	debug("computed sdram chip size is %#lx\n", sdram_chip_size);
-	/* divide sdram chip size by 64 Mbits */
-	sdram_chip_size = sdram_chip_size / 0x4000000;
-	switch (sdram_chip_size) {
-	case 1:		/* 64 Mbit */
-	case 2:		/* 128 Mbit */
-		debug("RAM-Device_size 64Mbit or 128Mbit)\n");
-		tmp |= (0x00 << 4);
-		break;
-	case 4:		/* 256 Mbit */
-	case 8:		/* 512 Mbit */
-		debug("RAM-Device_size 256Mbit or 512Mbit)\n");
-		tmp |= (0x01 << 4);
-		break;
-	case 16:		/* 1 Gbit */
-	case 32:		/* 2 Gbit */
-		debug("RAM-Device_size 1Gbit or 2Gbit)\n");
-		tmp |= (0x02 << 4);
-		break;
-	default:
-		printf ("Error in dram size calculation\n");
-		printf ("RAM-Device_size is unsupported\n");
-		hang ();
-	}
-
-	/* SDRAM address control */
-	GT_REG_WRITE (SDRAM_ADDR_CONTROL, tmp);
-	debug
-	    ("setting up sdram address control (0x1410) with: %08lx \n",
-	     tmp);
-
-/* ------------------------------------------------------------------------------ */
-/* same settings for registerd & non-registerd DDR SDRAM */
-	debug
-	    ("setting up sdram_timing_control_low (0x1408) with: %08x \n",
-	     0x11511220);
-	GT_REG_WRITE (SDRAM_TIMING_CONTROL_LOW, 0x11511220);
-
-
-/* ------------------------------------------------------------------------------ */
-
-	/* SDRAM configuration */
-	tmp = GTREGREAD (SDRAM_CONFIG);
-
-	if (info->registeredAddrAndControlInputs
-	    || info->registeredDQMBinputs) {
-		tmp |= (1 << 17);
-		debug
-		    ("SPD says: registered Addr. and Cont.: %d; registered DQMBinputs: %d\n",
-		     info->registeredAddrAndControlInputs,
-		     info->registeredDQMBinputs);
-	}
-
-	/* Use buffer 1 to return read data to the CPU
-	 * Page 426 MV64360 */
-	tmp |= (1 << 26);
-	debug
-	    ("Before Buffer assignment - sdram_conf (0x1400): %08x\n",
-	     GTREGREAD (SDRAM_CONFIG));
-	debug
-	    ("After Buffer assignment - sdram_conf (0x1400): %08x\n",
-	     GTREGREAD (SDRAM_CONFIG));
-
-	/* SDRAM timing To_do: */
-/* ------------------------------------------------------------------------------ */
-
-	debug
-	    ("setting up sdram_timing_control_high (0x140c) with: %08x \n",
-	     0x9);
-	GT_REG_WRITE (SDRAM_TIMING_CONTROL_HIGH, 0x9);
-
-	debug
-	    ("setting up sdram address pads control (0x14c0) with: %08x \n",
-	     0x7d5014a);
-	GT_REG_WRITE (SDRAM_ADDR_CTRL_PADS_CALIBRATION, 0x7d5014a);
-
-	debug
-  ("setting up sdram data pads control (0x14c4) with: %08x \n",
-	     0x7d5014a);
-	GT_REG_WRITE (SDRAM_DATA_PADS_CALIBRATION, 0x7d5014a);
-
-/* ------------------------------------------------------------------------------ */
-
-	/* set the SDRAM configuration for each bank */
-
-/*	for (i = info->slot * 2; i < ((info->slot * 2) + info->banks); i++) */
-	{
-		i = info->slot;
-		debug
-		    ("\n*** Running a MRS cycle for bank %d ***\n", i);
-
-		/* map the bank */
-		memory_map_bank (i, 0, GB / 4);
-
-		/* set SDRAM mode */ /* To_do check it */
-		GT_REG_WRITE (SDRAM_OPERATION, 0x3);
-		check = GTREGREAD (SDRAM_OPERATION);
-		debug
-		    ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n",
-		     check);
-
-
-		/* switch back to normal operation mode */
-		GT_REG_WRITE (SDRAM_OPERATION, 0);
-		check = GTREGREAD (SDRAM_OPERATION);
-		debug
-		    ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n",
-		     check);
-
-		/* unmap the bank */
-		memory_map_bank (i, 0, 0);
-	}
-
-	return 0;
-
-}
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-long int dram_size (long int *base, long int maxsize)
-{
-	volatile long int *addr, *b = base;
-	long int cnt, val, save1, save2;
-
-#define STARTVAL (1<<20)	/* start test at 1M */
-	for (cnt = STARTVAL / sizeof (long); cnt < maxsize / sizeof (long);
-	     cnt <<= 1) {
-		addr = base + cnt;	/* pointer arith! */
-
-		save1 = *addr;	/* save contents of addr */
-		save2 = *b;	/* save contents of base */
-
-		*addr = cnt;	/* write cnt to addr */
-		*b = 0;		/* put null at base */
-
-		/* check at base address */
-		if ((*b) != 0) {
-			*addr = save1;	/* restore *addr */
-			*b = save2;	/* restore *b */
-			return (0);
-		}
-		val = *addr;	/* read *addr */
-		val = *addr;	/* read *addr */
-
-		*addr = save1;
-		*b = save2;
-
-		if (val != cnt) {
-			debug
-			    ("Found %08x  at Address %08x (failure)\n",
-			     (unsigned int) val, (unsigned int) addr);
-			/* fix boundary condition.. STARTVAL means zero */
-			if (cnt == STARTVAL / sizeof (long))
-				cnt = 0;
-			return (cnt * sizeof (long));
-		}
-	}
-	return maxsize;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* ppcboot interface function to SDRAM init - this is where all the
- * controlling logic happens */
-phys_size_t initdram (int board_type)
-{
-	int checkbank[4] = {[0 ... 3] = 0 };
-	ulong realsize, total;
-	AUX_MEM_DIMM_INFO dimmInfo1;
-	AUX_MEM_DIMM_INFO dimmInfo2;
-	int nhr, bank_no;
-	ulong dest, memSpaceAttr;
-
-	/* first, use the SPD to get info about the SDRAM/ DDRRAM */
-
-	/* check the NHR bit and skip mem init if it's already done */
-	nhr = get_hid0 () & (1 << 16);
-
-	if (nhr) {
-		printf ("Skipping SD- DDRRAM setup due to NHR bit being set\n");
-	} else {
-		/* DIMM0 */
-		check_dimm (0, &dimmInfo1);
-
-		/* DIMM1 */
-		check_dimm (1, &dimmInfo2);
-
-		memory_map_bank (0, 0, 0);
-		memory_map_bank (1, 0, 0);
-		memory_map_bank (2, 0, 0);
-		memory_map_bank (3, 0, 0);
-
-		/* ronen check correct set of DIMMS */
-		if (dimmInfo1.numOfModuleBanks && dimmInfo2.numOfModuleBanks) {
-			if (dimmInfo1.errorCheckType !=
-			    dimmInfo2.errorCheckType)
-				printf ("***WARNNING***!!!! different ECC support of the DIMMS\n");
-			if (dimmInfo1.maxClSupported_DDR !=
-			    dimmInfo2.maxClSupported_DDR)
-				printf ("***WARNNING***!!!! different CAL setting of the DIMMS\n");
-			if (dimmInfo1.registeredAddrAndControlInputs !=
-			    dimmInfo2.registeredAddrAndControlInputs)
-				printf ("***WARNNING***!!!! different Registration setting of the DIMMS\n");
-		}
-
-		if (dimmInfo1.numOfModuleBanks && setup_sdram (&dimmInfo1)) {
-			printf ("Setup for DIMM1 failed.\n");
-		}
-
-		if (dimmInfo2.numOfModuleBanks && setup_sdram (&dimmInfo2)) {
-			printf ("Setup for DIMM2 failed.\n");
-		}
-
-		/* set the NHR bit */
-		set_hid0 (get_hid0 () | (1 << 16));
-	}
-	/* next, size the SDRAM banks */
-
-	realsize = total = 0;
-	if (dimmInfo1.numOfModuleBanks > 0) {
-		checkbank[0] = 1;
-	}
-	if (dimmInfo1.numOfModuleBanks > 1) {
-		checkbank[1] = 1;
-	}
-	if (dimmInfo1.numOfModuleBanks > 2)
-		printf ("Error, SPD claims DIMM1 has >2 banks\n");
-
-	printf ("-- DIMM1 has %d banks\n", dimmInfo1.numOfModuleBanks);
-
-	if (dimmInfo2.numOfModuleBanks > 0) {
-		checkbank[2] = 1;
-	}
-	if (dimmInfo2.numOfModuleBanks > 1) {
-		checkbank[3] = 1;
-	}
-	if (dimmInfo2.numOfModuleBanks > 2)
-		printf ("Error, SPD claims DIMM2 has >2 banks\n");
-
-	printf ("-- DIMM2 has %d banks\n", dimmInfo2.numOfModuleBanks);
-
-	for (bank_no = 0; bank_no < CONFIG_SYS_DRAM_BANKS; bank_no++) {
-		/* skip over banks that are not populated */
-		if (!checkbank[bank_no])
-			continue;
-
-		/* ronen - realsize = dram_size((long int *)total, check); */
-		if (bank_no == 0 || bank_no == 1) {
-			if (checkbank[1] == 1)
-				realsize = dimmInfo1.size / 2;
-			else
-				realsize = dimmInfo1.size;
-		}
-		if (bank_no == 2 || bank_no == 3) {
-			if (checkbank[3] == 1)
-				realsize = dimmInfo2.size / 2;
-			else
-				realsize = dimmInfo2.size;
-		}
-		memory_map_bank (bank_no, total, realsize);
-
-		/* ronen - initialize the DRAM for ECC */
-#ifdef CONFIG_MV64360_ECC
-		if ((dimmInfo1.errorCheckType != 0) &&
-		    ((dimmInfo2.errorCheckType != 0)
-		     || (dimmInfo2.numOfModuleBanks == 0))) {
-			printf ("ECC Initialization of Bank %d:", bank_no);
-			memSpaceAttr = ((~(BIT0 << bank_no)) & 0xf) << 8;
-			mvDmaSetMemorySpace (0, 0, memSpaceAttr, total,
-					     realsize);
-			for (dest = total; dest < total + realsize;
-			     dest += _8M) {
-				mvDmaTransfer (0, total, dest, _8M,
-					       BIT8 /*DMA_DTL_128BYTES */  |
-					       BIT3 /*DMA_HOLD_SOURCE_ADDR */
-					       |
-					       BIT11
-					       /*DMA_BLOCK_TRANSFER_MODE */ );
-				while (mvDmaIsChannelActive (0));
-			}
-			printf (" PASS\n");
-		}
-#endif
-
-		total += realsize;
-	}
-
-	/* ronen- add DRAM conf prints */
-	switch ((GTREGREAD (0x141c) >> 4) & 0x7) {
-	case 0x2:
-		printf ("CAS Latency = 2");
-		break;
-	case 0x3:
-		printf ("CAS Latency = 3");
-		break;
-	case 0x5:
-		printf ("CAS Latency = 1.5");
-		break;
-	case 0x6:
-		printf ("CAS Latency = 2.5");
-		break;
-	}
-	printf (" tRP = %d tRAS = %d tRCD=%d\n",
-		((GTREGREAD (0x1408) >> 8) & 0xf) + 1,
-		((GTREGREAD (0x1408) >> 20) & 0xf) + 1,
-		((GTREGREAD (0x1408) >> 4) & 0xf) + 1);
-
-/*	Setup Ethernet DMA Adress window to DRAM Area */
-	if (total > _256M)
-		printf ("*** ONLY the first 256MB DRAM memory are used out of the ");
-	else
-		printf ("Total SDRAM memory is ");
-	/* (cause all the 4 BATS are taken) */
-	return (total);
-}
-
-
-/* ronen- add Idma functions for usage of the ecc dram init. */
-/*******************************************************************************
-* mvDmaIsChannelActive - Checks if a engine is busy.
-********************************************************************************/
-int mvDmaIsChannelActive (int engine)
-{
-	ulong data;
-
-	data = GTREGREAD (MV64360_DMA_CHANNEL0_CONTROL + 4 * engine);
-	if (data & BIT14 /*activity status */ ) {
-		return 1;
-	}
-	return 0;
-}
-
-/*******************************************************************************
-* mvDmaSetMemorySpace - Set a DMA memory window for the DMA's address decoding
-*			map.
-*******************************************************************************/
-int mvDmaSetMemorySpace (ulong memSpace,
-			 ulong memSpaceTarget,
-			 ulong memSpaceAttr, ulong baseAddress, ulong size)
-{
-	ulong temp;
-
-	/* The base address must be aligned to the size.  */
-	if (baseAddress % size != 0) {
-		return 0;
-	}
-	if (size >= 0x10000 /*64K */ ) {
-		size &= 0xffff0000;
-		baseAddress = (baseAddress & 0xffff0000);
-		/* Set the new attributes */
-		GT_REG_WRITE (MV64360_DMA_BASE_ADDR_REG0 + memSpace * 8,
-			      (baseAddress | memSpaceTarget | memSpaceAttr));
-		GT_REG_WRITE ((MV64360_DMA_SIZE_REG0 + memSpace * 8),
-			      (size - 1) & 0xffff0000);
-		temp = GTREGREAD (MV64360_DMA_BASE_ADDR_ENABLE_REG);
-		GT_REG_WRITE (DMA_BASE_ADDR_ENABLE_REG,
-			      (temp & ~(BIT0 << memSpace)));
-		return 1;
-	}
-	return 0;
-}
-
-
-/*******************************************************************************
-* mvDmaTransfer - Transfer data from sourceAddr to destAddr on one of the 4
-*		  DMA channels.
-********************************************************************************/
-int mvDmaTransfer (int engine, ulong sourceAddr,
-		   ulong destAddr, ulong numOfBytes, ulong command)
-{
-	ulong engOffReg = 0;	/* Engine Offset Register */
-
-	if (numOfBytes > 0xffff) {
-		command = command | BIT31 /*DMA_16M_DESCRIPTOR_MODE */ ;
-	}
-	command = command | ((command >> 6) & 0x7);
-	engOffReg = engine * 4;
-	GT_REG_WRITE (MV64360_DMA_CHANNEL0_BYTE_COUNT + engOffReg,
-		      numOfBytes);
-	GT_REG_WRITE (MV64360_DMA_CHANNEL0_SOURCE_ADDR + engOffReg,
-		      sourceAddr);
-	GT_REG_WRITE (MV64360_DMA_CHANNEL0_DESTINATION_ADDR + engOffReg,
-		      destAddr);
-	command =
-		command | BIT12 /*DMA_CHANNEL_ENABLE */	 | BIT9
-		/*DMA_NON_CHAIN_MODE */ ;
-	/* Activate DMA engine By writting to mvDmaControlRegister */
-	GT_REG_WRITE (MV64360_DMA_CHANNEL0_CONTROL + engOffReg, command);
-	return 1;
-}
-
-/****************************************************************************************
- *				SDRAM INIT						*
- *  This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb	*
- *		  This procedure fits only the Atlantis					*
- *											*
- ***************************************************************************************/
-
-
-/****************************************************************************************
- *				DFCDL initialize MV643xx Design Considerations		*
- *											*
- ***************************************************************************************/
-int set_dfcdlInit (void)
-{
-	int i;
-	unsigned int dfcdl_word = 0x391;	/*   0x14f;  ronen new dfcdl */
-
-	for (i = 0; i < 64; i++) {
-		GT_REG_WRITE (SRAM_DATA0, dfcdl_word);
-/*	dfcdl_word += 0x41;  - ronen new dfcdl */
-	}
-	GT_REG_WRITE (DFCDL_CONFIG0, 0x00300000);	/* enable dynamic delay line updating */
-
-	return (0);
-}