Remove AmigaOneG3SE board

The AmigaOneG3SE board has been orphaned or a very long time, and
broken for more than 12 releases resp. more than 3 years.  As nobody
seems to be interested any more in this stuff we may as well ged rid
of it, especially as it clutters many areas of the code so it is a
continuous pain for all kinds of ongoing work.

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 0 insertions, 192 deletions

diff --git a/board/MAI/AmigaOneG3SE/usb_uhci.h b/board/MAI/AmigaOneG3SE/usb_uhci.h
deleted file mode 100644
index 33871573203..00000000000
--- a/board/MAI/AmigaOneG3SE/usb_uhci.h
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Note: Part of this code has been derived from linux
- *
- */
-#ifndef _USB_UHCI_H_
-#define _USB_UHCI_H_
-
-#undef USB_UHCI_VEND_ID
-#define USB_UHCI_VEND_ID PCI_VENDOR_ID_VIA
-#undef USB_UHCI_DEV_ID
-#define USB_UHCI_DEV_ID 0x3038
-
-/* Command register */
-#define USBCMD		0
-#define   USBCMD_RS       0x0001	/* Run/Stop */
-#define   USBCMD_HCRESET  0x0002	/* Host reset */
-#define   USBCMD_GRESET   0x0004	/* Global reset */
-#define   USBCMD_EGSM     0x0008	/* Global Suspend Mode */
-#define   USBCMD_FGR      0x0010	/* Force Global Resume */
-#define   USBCMD_SWDBG    0x0020	/* SW Debug mode */
-#define   USBCMD_CF       0x0040	/* Config Flag (sw only) */
-#define   USBCMD_MAXP     0x0080	/* Max Packet (0 = 32, 1 = 64) */
-
-/* Status register */
-#define USBSTS		2
-#define   USBSTS_USBINT   0x0001	/* Interrupt due to IOC */
-#define   USBSTS_ERROR    0x0002	/* Interrupt due to error */
-#define   USBSTS_RD       0x0004	/* Resume Detect */
-#define   USBSTS_HSE      0x0008	/* Host System Error - basically PCI problems */
-#define   USBSTS_HCPE     0x0010	/* Host Controller Process Error - the scripts were buggy */
-#define   USBSTS_HCH      0x0020	/* HC Halted */
-
-/* Interrupt enable register */
-#define USBINTR		4
-#define   USBINTR_TIMEOUT 0x0001	/* Timeout/CRC error enable */
-#define   USBINTR_RESUME  0x0002	/* Resume interrupt enable */
-#define   USBINTR_IOC     0x0004	/* Interrupt On Complete enable */
-#define   USBINTR_SP      0x0008	/* Short packet interrupt enable */
-
-#define USBFRNUM      6
-#define USBFLBASEADD  8
-#define USBSOF        12
-
-/* USB port status and control registers */
-#define USBPORTSC1	16
-#define USBPORTSC2	18
-#define   USBPORTSC_CCS   0x0001	/* Current Connect Status ("device present") */
-#define   USBPORTSC_CSC   0x0002	/* Connect Status Change */
-#define   USBPORTSC_PE    0x0004	/* Port Enable */
-#define   USBPORTSC_PEC   0x0008	/* Port Enable Change */
-#define   USBPORTSC_LS    0x0030	/* Line Status */
-#define   USBPORTSC_RD    0x0040	/* Resume Detect */
-#define   USBPORTSC_LSDA  0x0100	/* Low Speed Device Attached */
-#define   USBPORTSC_PR    0x0200	/* Port Reset */
-#define   USBPORTSC_SUSP  0x1000	/* Suspend */
-
-/* Legacy support register */
-#define USBLEGSUP 0xc0
-#define USBLEGSUP_DEFAULT 0x2000	/* only PIRQ enable set */
-
-#define UHCI_NULL_DATA_SIZE 0x7ff	/* for UHCI controller TD */
-#define UHCI_PID            0xff	/* PID MASK */
-
-#define UHCI_PTR_BITS       0x000F
-#define UHCI_PTR_TERM       0x0001
-#define UHCI_PTR_QH         0x0002
-#define UHCI_PTR_DEPTH      0x0004
-
-/* for TD <status>: */
-#define TD_CTRL_SPD         (1 << 29)	/* Short Packet Detect */
-#define TD_CTRL_C_ERR_MASK  (3 << 27)	/* Error Counter bits */
-#define TD_CTRL_LS          (1 << 26)	/* Low Speed Device */
-#define TD_CTRL_IOS         (1 << 25)	/* Isochronous Select */
-#define TD_CTRL_IOC         (1 << 24)	/* Interrupt on Complete */
-#define TD_CTRL_ACTIVE      (1 << 23)	/* TD Active */
-#define TD_CTRL_STALLED     (1 << 22)	/* TD Stalled */
-#define TD_CTRL_DBUFERR     (1 << 21)	/* Data Buffer Error */
-#define TD_CTRL_BABBLE      (1 << 20)	/* Babble Detected */
-#define TD_CTRL_NAK         (1 << 19)	/* NAK Received */
-#define TD_CTRL_CRCTIMEO    (1 << 18)	/* CRC/Time Out Error */
-#define TD_CTRL_BITSTUFF    (1 << 17)	/* Bit Stuff Error */
-#define TD_CTRL_ACTLEN_MASK 0x7ff	/* actual length, encoded as n - 1 */
-
-#define TD_CTRL_ANY_ERROR	(TD_CTRL_STALLED | TD_CTRL_DBUFERR | \
-				 TD_CTRL_BABBLE | TD_CTRL_CRCTIME | TD_CTRL_BITSTUFF)
-
-#define TD_TOKEN_TOGGLE		19
-
-/* ------------------------------------------------------------------------------------
-   Virtual Root HUB
-   ------------------------------------------------------------------------------------ */
-/* destination of request */
-#define RH_INTERFACE               0x01
-#define RH_ENDPOINT                0x02
-#define RH_OTHER                   0x03
-
-#define RH_CLASS                   0x20
-#define RH_VENDOR                  0x40
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS           0x0080
-#define RH_CLEAR_FEATURE        0x0100
-#define RH_SET_FEATURE          0x0300
-#define RH_SET_ADDRESS          0x0500
-#define RH_GET_DESCRIPTOR       0x0680
-#define RH_SET_DESCRIPTOR       0x0700
-#define RH_GET_CONFIGURATION    0x0880
-#define RH_SET_CONFIGURATION    0x0900
-#define RH_GET_STATE            0x0280
-#define RH_GET_INTERFACE        0x0A80
-#define RH_SET_INTERFACE        0x0B00
-#define RH_SYNC_FRAME           0x0C80
-/* Our Vendor Specific Request */
-#define RH_SET_EP               0x2000
-
-/* Hub port features */
-#define RH_PORT_CONNECTION         0x00
-#define RH_PORT_ENABLE             0x01
-#define RH_PORT_SUSPEND            0x02
-#define RH_PORT_OVER_CURRENT       0x03
-#define RH_PORT_RESET              0x04
-#define RH_PORT_POWER              0x08
-#define RH_PORT_LOW_SPEED          0x09
-#define RH_C_PORT_CONNECTION       0x10
-#define RH_C_PORT_ENABLE           0x11
-#define RH_C_PORT_SUSPEND          0x12
-#define RH_C_PORT_OVER_CURRENT     0x13
-#define RH_C_PORT_RESET            0x14
-
-/* Hub features */
-#define RH_C_HUB_LOCAL_POWER       0x00
-#define RH_C_HUB_OVER_CURRENT      0x01
-
-#define RH_DEVICE_REMOTE_WAKEUP    0x00
-#define RH_ENDPOINT_STALL          0x01
-
-/* Our Vendor Specific feature */
-#define RH_REMOVE_EP               0x00
-
-
-#define RH_ACK                     0x01
-#define RH_REQ_ERR                 -1
-#define RH_NACK                    0x00
-
-
-/* Transfer descriptor structure */
-typedef struct {
-	unsigned long link;     /* next td/qh (LE)*/
-	unsigned long status;   /* status of the td */
-	unsigned long info;     /* Max Lenght / Endpoint / device address and PID */
-	unsigned long buffer;   /* pointer to data buffer (LE) */
-	unsigned long dev_ptr;  /* pointer to the assigned device (BE) */
-	unsigned long res[3];   /* reserved (TDs must be 8Byte aligned) */
-} uhci_td_t, *puhci_td_t;
-
-/* Queue Header structure */
-typedef struct {
-	unsigned long head;       /* Next QH (LE)*/
-	unsigned long element;		/* Queue element pointer (LE) */
-	unsigned long res[5];     /* reserved */
-	unsigned long dev_ptr;    /* if 0 no tds have been assigned to this qh */
-} uhci_qh_t, *puhci_qh_t;
-
-struct virt_root_hub {
-	int devnum;		            /* Address of Root Hub endpoint */
-	int numports;             /* number of ports */
-	int c_p_r[8];             /* C_PORT_RESET */
-};
-
-
-#endif /* _USB_UHCI_H_ */