* Patch by Josef Wagner, 12 Mar 2003:

  - 16/32 MB and 50/80 MHz support with auto-detection for IP860
  - ETH05 and BEDBUG support for CU824
  - added support for MicroSys CPC45
  - new BOOTROM/FLASH0 and DOC base for PM826

* Patch by Robert Schwebel, 12 Mar 2003:
  Fix the chpart command on innokom board

* Name cleanup:
  mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
  s/PPCBoot/U-Boot/ in some files
  s/pImage/uImage/  in some files

* Patch by Detlev Zundel, 15 Jan 2003:
  Fix '' command line quoting

* Patch by The LEOX team, 19 Jan 2003:
  - add support for the ELPT860 board
  - add support for Dallas ds164x RTC

7 files changed, 1807 insertions, 0 deletions

diff --git a/board/LEOX/elpt860/Makefile b/board/LEOX/elpt860/Makefile
new file mode 100644
index 00000000000..abca765d725
--- /dev/null
+++ b/board/LEOX/elpt860/Makefile
@@ -0,0 +1,47 @@
+#######################################################################
+#
+# Copyright (C) 2000, 2001, 2002, 2003
+# The LEOX team <team@leox.org>, http://www.leox.org
+#
+# LEOX.org is about the development of free hardware and software resources
+#   for system on chip.
+#
+# Description: U-Boot port on the LEOX's ELPT860 CPU board
+# ~~~~~~~~~~~
+#
+#######################################################################
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#######################################################################
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $^
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/LEOX/elpt860/README.LEOX b/board/LEOX/elpt860/README.LEOX
new file mode 100644
index 00000000000..9ace97b3e84
--- /dev/null
+++ b/board/LEOX/elpt860/README.LEOX
@@ -0,0 +1,424 @@
+=============================================================================
+
+             U-Boot port on the LEOX's ELPT860 CPU board
+             -------------------------------------------
+
+LEOX.org is about the development of free hardware and software resources
+         for system on chip.
+
+For more information, contact The LEOX team <team@leox.org>
+
+References:
+~~~~~~~~~~
+    1) Get the last stable release from denx.de:
+           o ftp://ftp.denx.de/pub/u-boot/u-boot-0.2.0.tar.bz2
+    2) Get the current CVS snapshot:
+           o cvs -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot login
+           o cvs -z6 -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot co -P u-boot
+
+=============================================================================
+
+The ELPT860 CPU board has the following features:
+
+Processor:	- MPC860T @ 50MHz
+		- PowerPC Core
+		- 65 MIPS
+		- Caches: D->4KB, I->4KB
+		- CPM: 4 SCCs, 2 SMCs
+		- Ethernet 10/100
+		- SPI, I2C, PCMCIA, Parallel
+
+CPU board:	- DRAM:   16 MB
+		- FLASH: 512 KB + (2 * 4 MB)
+		- NVRAM: 128 KB
+		- 1 Serial link
+		- 2 Ethernet 10 BaseT Channels
+
+On power-up the processor jumps to the address of 0x02000100
+
+Thus, U-Boot is configured to reside in flash starting at the address of
+0x02001000.  The environment space is located in NVRAM separately from
+U-Boot, at the address of 0x03000000.
+
+=============================================================================
+
+                        U-Boot test results
+
+=============================================================================
+
+
+##################################################
+# Operation on the serial console (SMC1)
+##############################
+
+U-Boot 0.2.2 (Jan 19 2003 - 11:08:39)
+
+CPU:   XPC860xxZPnnB at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present
+         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
+Board: ### No HW ID - assuming ELPT860
+DRAM:  16 MB
+FLASH: 512 kB
+In:    serial
+Out:   serial
+Err:   serial
+Net:   SCC ETHERNET
+
+Type "run nfsboot" to mount root filesystem over NFS
+
+Hit any key to stop autoboot:  0
+LEOX_elpt860: help
+askenv  - get environment variables from stdin
+autoscr - run script from memory
+base    - print or set address offset
+bdinfo  - print Board Info structure
+bootm   - boot application image from memory
+bootp   - boot image via network using BootP/TFTP protocol
+bootd   - boot default, i.e., run 'bootcmd'
+cmp     - memory compare
+coninfo - print console devices and informations
+cp      - memory copy
+crc32   - checksum calculation
+echo    - echo args to console
+erase   - erase FLASH memory
+flinfo  - print FLASH memory information
+go      - start application at address 'addr'
+help    - print online help
+iminfo  - print header information for application image
+loadb   - load binary file over serial line (kermit mode)
+loads   - load S-Record file over serial line
+loop    - infinite loop on address range
+md      - memory display
+mm      - memory modify (auto-incrementing)
+mtest   - simple RAM test
+mw      - memory write (fill)
+nm      - memory modify (constant address)
+printenv- print environment variables
+protect - enable or disable FLASH write protection
+rarpboot- boot image via network using RARP/TFTP protocol
+reset   - Perform RESET of the CPU
+run     - run commands in an environment variable
+saveenv - save environment variables to persistent storage
+setenv  - set environment variables
+sleep   - delay execution for some time
+tftpboot- boot image via network using TFTP protocol
+               and env variables ipaddr and serverip
+version - print monitor version
+?       - alias for 'help'
+
+##################################################
+# Environment Variables (CFG_ENV_IS_IN_NVRAM)
+##############################
+
+LEOX_elpt860: printenv
+bootdelay=5
+loads_echo=1
+baudrate=9600
+stdin=serial
+stdout=serial
+stderr=serial
+ethaddr=00:03:ca:00:64:df
+ipaddr=192.168.0.30
+netmask=255.255.255.0
+serverip=192.168.0.1
+nfsserverip=192.168.0.1
+preboot=echo;echo Type "run nfsboot" to mount root filesystem over NFS;echo
+gatewayip=192.168.0.1
+ramargs=setenv bootargs root=/dev/ram rw
+rootargs=setenv rootpath /tftp/$(ipaddr)
+nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(nfsserverip):$(rootpath)
+addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(nfsserverip):$(gatewayip):$(netmask):$(hostname):eth0:
+ramboot=tftp 400000 /home/leox/pMulti;run ramargs;bootm
+nfsboot=tftp 400000 /home/leox/uImage;run rootargs;run nfsargs;run addip;bootm
+bootcmd=run ramboot
+clocks_in_mhz=1
+
+Environment size: 730/16380 bytes
+
+##################################################
+# Flash Memory Information
+##############################
+
+LEOX_elpt860: flinfo
+
+Bank # 1: AMD AM29F040   (4 Mbits)
+  Size: 512 KB in 8 Sectors
+  Sector Start Addresses:
+    02000000 (RO) 02010000 (RO) 02020000 (RO) 02030000 (RO) 02040000     
+    02050000      02060000      02070000     
+
+##################################################
+# Board Information Structure
+##############################
+
+LEOX_elpt860: bdinfo
+memstart    = 0x00000000
+memsize     = 0x01000000
+flashstart  = 0x02000000
+flashsize   = 0x00080000
+flashoffset = 0x00030000
+sramstart   = 0x00000000
+sramsize    = 0x00000000
+immr_base   = 0xFF000000
+bootflags   = 0x00000001
+intfreq     =     50 MHz
+busfreq     =     50 MHz
+ethaddr     = 00:03:ca:00:64:df
+IP addr     = 192.168.0.30
+baudrate    =   9600 bps
+
+##################################################
+# Image Download and run over serial port
+#    hello_world (S-Record image)
+#    ===> 1) Enter "loads" command into U-Boot monitor
+#    ===> 2) From TeraTerm's bar menu, Select 'File/Send file...'
+#            Then select 'hello_world.srec' with the file browser
+##############################
+
+U-Boot 0.2.2 (Jan 19 2003 - 11:08:39)
+
+CPU:   XPC860xxZPnnB at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present
+         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
+Board: ### No HW ID - assuming ELPT860
+DRAM:  16 MB
+FLASH: 512 kB
+In:    serial
+Out:   serial
+Err:   serial
+Net:   SCC ETHERNET
+
+Type "run nfsboot" to mount root filesystem over NFS
+
+Hit any key to stop autoboot:  0
+LEOX_elpt860: loads
+## Ready for S-Record download ...
+S804040004F3050154000501709905014C000501388D
+## First Load Addr = 0x00040000
+## Last  Load Addr = 0x0005018B
+## Total Size      = 0x0001018C = 65932 Bytes
+## Start Addr      = 0x00040004
+LEOX_elpt860: go 40004 This is a test !!!
+## Starting application at 0x00040004 ...
+Hello World
+argc = 6
+argv[0] = "40004"
+argv[1] = "This"
+argv[2] = "is"
+argv[3] = "a"
+argv[4] = "test"
+argv[5] = "!!!"
+argv[6] = "<NULL>"
+Hit any key to exit ...
+
+## Application terminated, rc = 0x0
+
+##################################################
+# Image download and run over ethernet interface
+#    Linux-2.4.4 (uImage) + Root filesystem mounted over NFS
+##############################
+
+U-Boot 0.2.2 (Jan 19 2003 - 11:08:39)
+
+CPU:   XPC860xxZPnnB at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present
+         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
+Board: ### No HW ID - assuming ELPT860
+DRAM:  16 MB
+FLASH: 512 kB
+In:    serial
+Out:   serial
+Err:   serial
+Net:   SCC ETHERNET
+
+Type "run nfsboot" to mount root filesystem over NFS
+
+Hit any key to stop autoboot:  0
+LEOX_elpt860: run nfsboot
+ARP broadcast 1
+TFTP from server 192.168.0.1; our IP address is 192.168.0.30
+Filename '/home/leox/uImage'.
+Load address: 0x400000
+Loading: #################################################################
+         #############################
+done
+Bytes transferred = 477294 (7486e hex)
+## Booting image at 00400000 ...
+   Image Name:   Linux-2.4.4
+   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
+   Data Size:    477230 Bytes = 466 kB = 0 MB
+   Load Address: 00000000
+   Entry Point:  00000000
+   Verifying Checksum ... OK
+   Uncompressing Kernel Image ... OK
+Linux version 2.4.4-rthal5 (leox@p5ak6650) (gcc version 2.95.3 20010315 (release/MontaVista)) #1 Wed Jul 3 10:23:53 CEST 2002
+On node 0 totalpages: 4096
+zone(0): 4096 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/nfs rw nfsroot=192.168.0.1:/tftp/192.168.0.30 ip=192.168.0.30:192.168.0.1:192.168.0.1:255.255.255.0::eth0:
+rtsched version <20010618.1050.24>
+Decrementer Frequency: 3125000
+Warning: real time clock seems stuck!
+Calibrating delay loop... 49.76 BogoMIPS
+Memory: 14720k available (928k kernel code, 384k data, 44k init, 0k highmem)
+Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
+Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
+POSIX conformance testing by UNIFIX
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Starting kswapd v1.8
+CPM UART driver version 0.03
+ttyS0 on SMC1 at 0x0280, BRG1
+block: queued sectors max/low 9701kB/3233kB, 64 slots per queue
+RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
+eth0: CPM ENET Version 0.2 on SCC1, 00:03:ca:00:64:df
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 1024 bind 1024)
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+Looking up port of RPC 100003/2 on 192.168.0.1
+Looking up port of RPC 100005/2 on 192.168.0.1
+VFS: Mounted root (nfs filesystem).
+Freeing unused kernel memory: 44k init
+INIT: version 2.78 booting
+                Welcome to DENX Embedded Linux Environment
+                Press 'I' to enter interactive startup.
+Mounting proc filesystem:  [  OK  ]
+Configuring kernel parameters:  [  OK  ]
+Cannot access the Hardware Clock via any known method.
+Use the --debug option to see the details of our search for an access method.
+Setting clock : Wed Dec 31 19:00:11 EST 1969 [  OK  ]
+Activating swap partitions:  [  OK  ]
+Setting hostname 192.168.0.30:  [  OK  ]
+Finding module dependencies:
+[  OK  ]
+Checking filesystems
+Checking all file systems.
+[  OK  ]
+Mounting local filesystems:  [  OK  ]
+Enabling swap space:  [  OK  ]
+INIT: Entering runlevel: 3
+Entering non-interactive startup
+Starting system logger: [  OK  ]
+Starting kernel logger: [  OK  ]
+Starting xinetd: [  OK  ]
+
+192 login: root
+Last login: Wed Dec 31 19:00:41 on ttyS0
+bash-2.04#
+
+##################################################
+# Image download and run over ethernet interface
+#    Linux-2.4.4 + Root filesystem mounted from RAM (pMulti)
+##############################
+
+U-Boot 0.2.2 (Jan 19 2003 - 11:08:39)
+
+CPU:   XPC860xxZPnnB at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present
+         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
+Board: ### No HW ID - assuming ELPT860
+DRAM:  16 MB
+FLASH: 512 kB
+In:    serial
+Out:   serial
+Err:   serial
+Net:   SCC ETHERNET
+
+Type "run nfsboot" to mount root filesystem over NFS
+
+Hit any key to stop autoboot:  0
+LEOX_elpt860: run ramboot
+ARP broadcast 1
+TFTP from server 192.168.0.1; our IP address is 192.168.0.30
+Filename '/home/leox/pMulti'.
+Load address: 0x400000
+Loading: #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         ########################################################
+done
+Bytes transferred = 1947816 (1db8a8 hex)
+## Booting image at 00400000 ...
+   Image Name:   linux-2.4.4-2002-03-21 Multiboot
+   Image Type:   PowerPC Linux Multi-File Image (gzip compressed)
+   Data Size:    1947752 Bytes = 1902 kB = 1 MB
+   Load Address: 00000000
+   Entry Point:  00000000
+   Contents:
+   Image 0:   477230 Bytes = 466 kB = 0 MB
+   Image 1:  1470508 Bytes = 1436 kB = 1 MB
+   Verifying Checksum ... OK
+   Uncompressing Multi-File Image ... OK
+   Loading Ramdisk to 00e44000, end 00fab02c ... OK
+Linux version 2.4.4-rthal5 (leox@p5ak6650) (gcc version 2.95.3 20010315 (release/MontaVista)) #1 Wed Jul 3 10:23:53 CEST 2002
+On node 0 totalpages: 4096
+zone(0): 4096 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/ram rw
+rtsched version <20010618.1050.24>
+Decrementer Frequency: 3125000
+Warning: real time clock seems stuck!
+Calibrating delay loop... 49.76 BogoMIPS
+Memory: 13280k available (928k kernel code, 384k data, 44k init, 0k highmem)
+Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
+Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
+POSIX conformance testing by UNIFIX
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Starting kswapd v1.8
+CPM UART driver version 0.03
+ttyS0 on SMC1 at 0x0280, BRG1
+block: queued sectors max/low 8741kB/2913kB, 64 slots per queue
+RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
+eth0: CPM ENET Version 0.2 on SCC1, 00:03:ca:00:64:df
+RAMDISK: Compressed image found at block 0
+Freeing initrd memory: 1436k freed
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 1024 bind 1024)
+IP-Config: Incomplete network configuration information.
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+VFS: Mounted root (ext2 filesystem).
+Freeing unused kernel memory: 44k iné
+init started:  BusyBox v0.60.2 (2002.07.01-12:06+0000) multi-call Configuring hostname
+Configuring lo...
+Configuring eth0...
+Configuring Gateway...
+
+Please press Enter to activate this console.
+
+ELPT860 login: root
+Password:
+Welcome to Linux-2.4.4 for ELPT CPU board (MPC860T @ 50MHz)
+
+                                              a8888b.
+                                             d888888b.
+                                             8P"YP"Y88
+     _      _                                8|o||o|88
+    | |    |_|                               8'    .88
+    | |     _ ____  _   _  _  _              8`._.' Y8.
+    | |    | |  _ \| | | |\ \/ /            d/      `8b.
+    | |___ | | | | | |_| |/    \          .dP   .     Y8b.
+    |_____||_|_| |_|\____|\_/\_/         d8:'   "   `::88b.
+                                        d8"           `Y88b
+                                       :8P     '       :888
+                                        8a.    :      _a88P
+                                      ._/"Yaa_ :    .| 88P|
+                                      \    YP"      `| 8P  `.
+                                      /     \._____.d|    .'
+                                      `--..__)888888P`._.'
+login[21]: root login  on `ttyS0'
+
+
+
+BusyBox v0.60.3 (2002.07.20-10:39+0000) Built-in shell (ash)
+Enter 'help' for a list of built-in commands.
+
+root@ELPT860:~ #
diff --git a/board/LEOX/elpt860/config.mk b/board/LEOX/elpt860/config.mk
new file mode 100644
index 00000000000..defc3608002
--- /dev/null
+++ b/board/LEOX/elpt860/config.mk
@@ -0,0 +1,36 @@
+#######################################################################
+#
+# Copyright (C) 2000, 2001, 2002, 2003
+# The LEOX team <team@leox.org>, http://www.leox.org
+#
+# LEOX.org is about the development of free hardware and software resources
+#   for system on chip.
+#
+# Description: U-Boot port on the LEOX's ELPT860 CPU board
+# ~~~~~~~~~~~
+#
+#######################################################################
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#######################################################################
+
+#
+# ELPT860 board
+#
+
+TEXT_BASE = 0x02000000
+#TEXT_BASE = 0x00FB0000
diff --git a/board/LEOX/elpt860/elpt860.c b/board/LEOX/elpt860/elpt860.c
new file mode 100644
index 00000000000..25645462ff7
--- /dev/null
+++ b/board/LEOX/elpt860/elpt860.c
@@ -0,0 +1,399 @@
+/*
+**=====================================================================
+**
+** Copyright (C) 2000, 2001, 2002, 2003
+** The LEOX team <team@leox.org>, http://www.leox.org
+**
+** LEOX.org is about the development of free hardware and software resources
+**   for system on chip.
+**
+** Description: U-Boot port on the LEOX's ELPT860 CPU board
+** ~~~~~~~~~~~
+**
+**=====================================================================
+**
+** This program is free software; you can redistribute it and/or
+** modify it under the terms of the GNU General Public License as
+** published by the Free Software Foundation; either version 2 of
+** the License, or (at your option) any later version.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+** GNU General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+** MA 02111-1307 USA
+**
+**=====================================================================
+*/
+
+/*
+** Note 1: In this file, you have to provide the following functions:
+** ------
+**              int             board_pre_init(void)
+**              int             checkboard(void)
+**              long int        initdram(int board_type)
+** called from 'board_init_f()' into 'common/board.c'
+**
+**              void            reset_phy(void)
+** called from 'board_init_r()' into 'common/board.c'
+*/
+
+#include <common.h>
+#include <mpc8xx.h>
+
+/* ------------------------------------------------------------------------- */
+
+static long int dram_size (long int, long int *, long int);
+
+/* ------------------------------------------------------------------------- */
+
+#define	_NOT_USED_	0xFFFFFFFF
+
+const uint init_sdram_table[] =
+{
+  /*
+   * Single Read. (Offset 0 in UPMA RAM)
+   */
+  0x0FFCCC04, 0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04,
+  0xFFFFFC04, /* last */
+  /*
+   * SDRAM Initialization (offset 5 in UPMA RAM)
+   *
+   * This is no UPM entry point. The following definition uses
+   * the remaining space to establish an initialization
+   * sequence, which is executed by a RUN command.
+   *
+   */
+  0xFFFFFC04, 0xFFFFFC04, 0x0FFC3C04,  /* last */
+  /*
+   * Burst Read. (Offset 8 in UPMA RAM)
+   */
+  0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+  0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+  0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04,
+  0xFFFFFC04, 0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04, /* last */
+  /*
+   * Single Write. (Offset 18 in UPMA RAM)
+   */
+  0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, 0x0FFC3C04,
+  0xFFFFFC04, 0xFFFFFC04, 0x0FFFFC04, 0xFFFFFC04, /* last */
+  /*
+   * Burst Write. (Offset 20 in UPMA RAM)
+   */
+  0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+  0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04,
+  0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC34, 0x0FAC0C34,
+  0xFFFFFC05, 0xFFFFFC04, 0x0FFCFC04, 0xFFFFFC05, /* last */
+};
+
+const uint sdram_table[] =
+{
+  /*
+   * Single Read. (Offset 0 in UPMA RAM)
+   */
+  0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC04, 0x00AF3C04, 
+  0xFF0FFC00, /* last */
+  /*
+   * SDRAM Initialization (offset 5 in UPMA RAM)
+   *
+   * This is no UPM entry point. The following definition uses
+   * the remaining space to establish an initialization
+   * sequence, which is executed by a RUN command.
+   *
+   */
+  0x0FFCCC04, 0xFFAFFC05, 0xFFAFFC05, /* last */
+  /*
+   * Burst Read. (Offset 8 in UPMA RAM)
+   */
+  0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC04, 0x00AF3C04, 
+  0xF00FFC00, 0xF00FFC00, 0xF00FFC00, 0xFF0FFC00,
+  0x0FFCCC04, 0xFFAFFC05, 0xFFAFFC04, 0xFFAFFC04, 
+  0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, /* last */
+  /*
+   * Single Write. (Offset 18 in UPMA RAM)
+   */
+  0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC04, 0x00AF0C00, 
+  0xFF0FFC04, 0x0FFCCC04, 0xFFAFFC05, /* last */
+  _NOT_USED_, 
+  /*
+   * Burst Write. (Offset 20 in UPMA RAM)
+   */
+  0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC00, 0x00AF0C00, 
+  0xF00FFC00, 0xF00FFC00, 0xF00FFC04, 0x0FFCCC04, 
+  0xFFAFFC04, 0xFFAFFC05, 0xFFAFFC04, 0xFFAFFC04, 
+  0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, /* last */
+  /*
+   * Refresh  (Offset 30 in UPMA RAM)
+   */
+  0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, 
+  0xFFFFFC05, 0xFFFFFC04, 0xFFFFFC05, _NOT_USED_, 
+  0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, /* last */
+  /*
+   * Exception. (Offset 3c in UPMA RAM)
+   */
+  0x0FFFFC34, 0x0FAC0C34, 0xFFFFFC05, 0xFFAFFC04, /* last */
+};
+
+/* ------------------------------------------------------------------------- */
+
+#define CFG_PC4    0x0800
+
+#define CFG_DS1    CFG_PC4
+
+/*
+ * Very early board init code (fpga boot, etc.)
+ */
+int
+board_pre_init (void)
+{
+  volatile immap_t *immr = (immap_t *) CFG_IMMR;
+
+  /* 
+   * Light up the red led on ELPT860 pcb (DS1) (PCDAT) 
+   */
+  immr->im_ioport.iop_pcdat &= ~CFG_DS1;   /* PCDAT (DS1 = 0)                */
+  immr->im_ioport.iop_pcpar &= ~CFG_DS1;   /* PCPAR (0=general purpose I/O)  */
+  immr->im_ioport.iop_pcdir |=  CFG_DS1;   /* PCDIR (I/O: 0=input, 1=output) */
+
+  return ( 0 );    /* success */
+}
+
+/*
+ * Check Board Identity:
+ *
+ * Test ELPT860 ID string
+ *
+ * Return 1 if no second DRAM bank, otherwise returns 0
+ */
+
+int 
+checkboard (void)
+{
+    unsigned char *s = getenv("serial#");
+
+    if ( !s || strncmp(s, "ELPT860", 7) )
+      printf ("### No HW ID - assuming ELPT860\n");
+    
+    return ( 0 );    /* success */
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int 
+initdram (int board_type)
+{
+    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile memctl8xx_t *memctl = &immap->im_memctl;
+    long int              size8, size9;
+    long int              size_b0 = 0;
+
+    /*
+     * This sequence initializes SDRAM chips on ELPT860 board
+     */
+    upmconfig(UPMA, (uint *)init_sdram_table, 
+	      sizeof(init_sdram_table)/sizeof(uint));
+
+    memctl->memc_mptpr = 0x0200;
+    memctl->memc_mamr  = 0x18002111;
+
+    memctl->memc_mar   = 0x00000088;
+    memctl->memc_mcr   = 0x80002000;	/* CS1: SDRAM bank 0 */
+
+    upmconfig(UPMA, (uint *)sdram_table, 
+	      sizeof(sdram_table)/sizeof(uint));
+
+    /*
+     * Preliminary prescaler for refresh (depends on number of
+     * banks): This value is selected for four cycles every 62.4 us
+     * with two SDRAM banks or four cycles every 31.2 us with one
+     * bank. It will be adjusted after memory sizing.
+     */
+    memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+
+    /*
+     * The following value is used as an address (i.e. opcode) for
+     * the LOAD MODE REGISTER COMMAND during SDRAM initialisation. If
+     * the port size is 32bit the SDRAM does NOT "see" the lower two
+     * address lines, i.e. mar=0x00000088 -> opcode=0x00000022 for
+     * MICRON SDRAMs:
+     * ->    0 00 010 0 010
+     *       |  |   | |   +- Burst Length = 4
+     *       |  |   | +----- Burst Type   = Sequential
+     *       |  |   +------- CAS Latency  = 2
+     *       |  +----------- Operating Mode = Standard
+     *       +-------------- Write Burst Mode = Programmed Burst Length
+     */
+    memctl->memc_mar   = 0x00000088;
+
+    /*
+     * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
+     * preliminary addresses - these have to be modified after the
+     * SDRAM size has been determined.
+     */
+    memctl->memc_or1   = CFG_OR1_PRELIM;
+    memctl->memc_br1   = CFG_BR1_PRELIM;
+
+    memctl->memc_mamr  = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
+
+    udelay (200);
+
+    /* perform SDRAM initializsation sequence */
+
+    memctl->memc_mcr   = 0x80002105;	/* CS1: SDRAM bank 0 */
+    udelay (1);
+    memctl->memc_mcr   = 0x80002230;	/* CS1: SDRAM bank 0 - execute twice */
+    udelay (1);
+
+    memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
+
+    udelay (1000);
+
+    /*
+     * Check Bank 0 Memory Size for re-configuration
+     *
+     * try 8 column mode
+     */
+    size8 = dram_size (CFG_MAMR_8COL, 
+		       (ulong *) SDRAM_BASE1_PRELIM, 
+		       SDRAM_MAX_SIZE);
+
+    udelay (1000);
+
+    /*
+     * try 9 column mode
+     */
+    size9 = dram_size (CFG_MAMR_9COL, 
+		       (ulong *) SDRAM_BASE1_PRELIM, 
+		       SDRAM_MAX_SIZE);
+
+    if ( size8 < size9 )    /* leave configuration at 9 columns	*/
+      {
+	size_b0 = size9;
+	/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
+      } 
+    else                  /* back to 8 columns			*/
+      {
+	size_b0 = size8;
+	memctl->memc_mamr = CFG_MAMR_8COL;
+	udelay (500);
+	/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
+      }
+    
+    udelay (1000);
+
+    /*
+     * Adjust refresh rate depending on SDRAM type, both banks
+     * For types > 128 MBit leave it at the current (fast) rate
+     */
+    if ( size_b0 < 0x02000000 ) 
+      {
+	/* reduce to 15.6 us (62.4 us / quad) */
+	memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+	udelay (1000);
+      }
+
+    /*
+     * Final mapping: map bigger bank first
+     */
+    memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+    memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+
+    {
+      unsigned long reg;
+      
+      /* adjust refresh rate depending on SDRAM type, one bank */
+      reg = memctl->memc_mptpr;
+      reg >>= 1;	/* reduce to CFG_MPTPR_1BK_8K / _4K */
+      memctl->memc_mptpr = reg;
+    }
+
+    udelay(10000);
+    
+    return (size_b0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int 
+dram_size (long int   mamr_value, 
+	   long int  *base, 
+	   long int   maxsize)
+{
+  volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+  volatile memctl8xx_t *memctl = &immap->im_memctl;
+  volatile long int    *addr;
+  ulong                 cnt, val;
+  ulong                 save[32];    /* to make test non-destructive */
+  unsigned char         i = 0;
+  
+  memctl->memc_mamr = mamr_value;
+  
+  for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) 
+    {
+      addr = base + cnt;    /* pointer arith! */
+      
+      save[i++] = *addr;
+      *addr     = ~cnt;
+    }
+  
+  /* write 0 to base address */
+  addr    = base;
+  save[i] = *addr;
+  *addr   = 0;
+  
+  /* check at base address */
+  if ( (val = *addr) != 0 ) 
+    {
+      *addr = save[i];
+
+      return (0);
+    }
+  
+  for (cnt = 1; cnt <= maxsize/sizeof(long); cnt <<= 1) 
+    {
+      addr = base + cnt;    /* pointer arith! */
+      
+      val   = *addr;
+      *addr = save[--i];
+      
+      if ( val != (~cnt) ) 
+	{
+	  return (cnt * sizeof(long));
+	}
+    }
+
+  return (maxsize);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#define CFG_PA1     0x4000
+#define CFG_PA2     0x2000
+
+#define CFG_LBKs    (CFG_PA2 | CFG_PA1)
+
+void
+reset_phy (void)
+{
+  volatile immap_t *immr = (immap_t *) CFG_IMMR;
+  
+  /*
+   * Ensure LBK LXT901 ethernet 1 & 2 = 0 ... for normal loopback in effect
+   *                                          and no AUI loopback
+   */
+  immr->im_ioport.iop_padat &= ~CFG_LBKs;  /* PADAT (LBK eth 1&2 = 0)        */
+  immr->im_ioport.iop_papar &= ~CFG_LBKs;  /* PAPAR (0=general purpose I/O)  */
+  immr->im_ioport.iop_padir |=  CFG_LBKs;  /* PADIR (I/O: 0=input, 1=output) */
+}
diff --git a/board/LEOX/elpt860/flash.c b/board/LEOX/elpt860/flash.c
new file mode 100644
index 00000000000..a9238e16cfe
--- /dev/null
+++ b/board/LEOX/elpt860/flash.c
@@ -0,0 +1,615 @@
+/*
+**=====================================================================
+**
+** Copyright (C) 2000, 2001, 2002, 2003
+** The LEOX team <team@leox.org>, http://www.leox.org
+**
+** LEOX.org is about the development of free hardware and software resources
+**   for system on chip.
+**
+** Description: U-Boot port on the LEOX's ELPT860 CPU board
+** ~~~~~~~~~~~
+**
+**=====================================================================
+**
+** This program is free software; you can redistribute it and/or
+** modify it under the terms of the GNU General Public License as
+** published by the Free Software Foundation; either version 2 of
+** the License, or (at your option) any later version.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+** GNU General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+** MA 02111-1307 USA
+**
+**=====================================================================
+*/
+
+/*
+** Note 1: In this file, you have to provide the following variable:
+** ------
+**              flash_info_t    flash_info[CFG_MAX_FLASH_BANKS]
+** 'flash_info_t' structure is defined into 'include/flash.h'
+** and defined as extern into 'common/cmd_flash.c'
+**
+** Note 2: In this file, you have to provide the following functions:
+** ------
+**              unsigned long   flash_init(void)
+** called from 'board_init_r()' into 'common/board.c'
+**
+**              void            flash_print_info(flash_info_t *info)
+** called from 'do_flinfo()' into 'common/cmd_flash.c'
+**
+**              int             flash_erase(flash_info_t *info,
+**                                          int           s_first,
+**                                          int           s_last)
+** called from 'do_flerase()' & 'flash_sect_erase()' into 'common/cmd_flash.c'
+**
+**              int             write_buff (flash_info_t *info,
+**                                          uchar        *src,
+**                                          ulong         addr,
+**                                          ulong         cnt)
+** called from 'flash_write()' into 'common/cmd_flash.c'
+*/
+
+#include <common.h>
+#include <mpc8xx.h>
+
+
+#ifndef	CFG_ENV_ADDR
+#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#endif
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Internal Functions
+ */
+static void   flash_get_offsets (ulong base, flash_info_t *info);
+static ulong  flash_get_size (volatile unsigned char *addr, flash_info_t *info);
+
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static int write_byte (flash_info_t *info, ulong dest, uchar data);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long 
+flash_init (void)
+{
+  volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+  volatile memctl8xx_t *memctl = &immap->im_memctl;
+  unsigned long         size_b0;
+  int i;
+  
+  /* Init: no FLASHes known */
+  for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) 
+    {
+      flash_info[i].flash_id = FLASH_UNKNOWN;
+    }
+  
+  /* Static FLASH Bank configuration here - FIXME XXX */
+  
+  size_b0 = flash_get_size ((volatile unsigned char *)FLASH_BASE0_PRELIM, 
+			    &flash_info[0]);
+  
+  if ( flash_info[0].flash_id == FLASH_UNKNOWN ) 
+    {
+      printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+	      size_b0, size_b0<<20);
+    }
+  
+  /* Remap FLASH according to real size */
+  memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
+  memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_PS_8 | BR_V;
+  
+  /* Re-do sizing to get full correct info */
+  size_b0 = flash_get_size ((volatile unsigned char *)CFG_FLASH_BASE, 
+			    &flash_info[0]);
+  
+  flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+  
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+  /* monitor protection ON by default */
+  flash_protect (FLAG_PROTECT_SET,
+		 CFG_MONITOR_BASE,
+		 CFG_MONITOR_BASE + CFG_MONITOR_LEN-1,
+		 &flash_info[0]);
+#endif
+  
+#ifdef	CFG_ENV_IS_IN_FLASH
+  /* ENV protection ON by default */
+  flash_protect(FLAG_PROTECT_SET,
+		CFG_ENV_ADDR,
+		CFG_ENV_ADDR + CFG_ENV_SIZE-1,
+		&flash_info[0]);
+#endif
+
+  flash_info[0].size = size_b0;
+  
+  return (size_b0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void 
+flash_get_offsets (ulong          base, 
+		   flash_info_t  *info)
+{
+  int i;
+
+#define SECTOR_64KB    0x00010000
+
+  /* set up sector start adress table */
+  for (i = 0; i < info->sector_count; i++) 
+    {
+      info->start[i] = base + (i * SECTOR_64KB);
+    }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void 
+flash_print_info (flash_info_t *info)
+{
+  int i;
+  
+  if ( info->flash_id == FLASH_UNKNOWN ) 
+    {
+      printf ("missing or unknown FLASH type\n");
+      return;
+    }
+
+  switch ( info->flash_id & FLASH_VENDMASK ) 
+    {
+    case FLASH_MAN_AMD:	printf ("AMD ");		break;
+    case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
+    case FLASH_MAN_STM: printf ("STM (Thomson) ");      break;
+    default:		printf ("Unknown Vendor ");	break;
+    }
+  
+  switch ( info->flash_id & FLASH_TYPEMASK ) 
+    {
+    case FLASH_AM040:   printf ("AM29F040   (4 Mbits)\n");
+      break;
+    default:	        printf ("Unknown Chip Type\n");
+      break;
+    }
+  
+  printf ("  Size: %ld KB in %d Sectors\n", 
+	  info->size >> 10, info->sector_count);
+  
+  printf ("  Sector Start Addresses:");
+  for (i=0; i<info->sector_count; ++i) 
+    {
+      if ((i % 5) == 0)
+	printf ("\n   ");
+      printf (" %08lX%s",
+	      info->start[i],
+	      info->protect[i] ? " (RO)" : "     "
+	      );
+    }
+  printf ("\n");
+
+  return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong 
+flash_get_size (volatile unsigned char *addr, 
+                flash_info_t           *info)
+{
+  short i;
+  uchar value;
+  ulong base = (ulong)addr;
+
+  /* Write auto select command: read Manufacturer ID */
+  addr[0x0555] = 0xAA;
+  addr[0x02AA] = 0x55;
+  addr[0x0555] = 0x90;
+  
+  value = addr[0];
+
+  switch ( value ) 
+    {
+      /*    case AMD_MANUFACT: */
+    case 0x01:
+      info->flash_id = FLASH_MAN_AMD;
+      break;
+      /*    case FUJ_MANUFACT: */
+    case 0x04:
+      info->flash_id = FLASH_MAN_FUJ;
+      break;
+      /*    case STM_MANUFACT: */
+    case 0x20:
+      info->flash_id = FLASH_MAN_STM;
+      break;
+
+    default:
+      info->flash_id = FLASH_UNKNOWN;
+      info->sector_count = 0;
+      info->size = 0;
+      return (0);			/* no or unknown flash	*/
+    }
+  
+  value = addr[1];			/* device ID		*/
+  
+  switch ( value ) 
+    {
+    case STM_ID_F040B:
+    case AMD_ID_F040B:
+      info->flash_id += FLASH_AM040;    /* 4 Mbits = 512k * 8  */
+      info->sector_count = 8;
+      info->size = 0x00080000;
+      break;
+
+    default:
+      info->flash_id = FLASH_UNKNOWN;
+      return (0);			/* => no or unknown flash */
+    }
+
+  /* set up sector start adress table */
+  for (i = 0; i < info->sector_count; i++) 
+    {
+      info->start[i] = base + (i * 0x00010000);
+    }
+  
+  /* check for protected sectors */
+  for (i = 0; i < info->sector_count; i++) 
+    {
+      /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+      /* D0 = 1 if protected */
+      addr = (volatile unsigned char *)(info->start[i]);
+      info->protect[i] = addr[2] & 1;
+    }
+
+  /*
+   * Prevent writes to uninitialized FLASH.
+   */
+  if ( info->flash_id != FLASH_UNKNOWN ) 
+    {
+      addr = (volatile unsigned char *)info->start[0];
+      
+      *addr = 0xF0;	/* reset bank */
+    }
+  
+  return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int
+flash_erase (flash_info_t  *info, 
+	     int            s_first, 
+	     int            s_last)
+{
+  volatile unsigned char *addr = (volatile unsigned char *)(info->start[0]);
+  int flag, prot, sect, l_sect;
+  ulong start, now, last;
+  
+  if ( (s_first < 0) || (s_first > s_last) ) 
+    {
+      if ( info->flash_id == FLASH_UNKNOWN ) 
+	{
+	  printf ("- missing\n");
+	} 
+      else 
+	{
+	  printf ("- no sectors to erase\n");
+	}
+      return ( 1 );
+    }
+
+  if ( (info->flash_id == FLASH_UNKNOWN) ||
+       (info->flash_id > FLASH_AMD_COMP) ) 
+    {
+      printf ("Can't erase unknown flash type %08lx - aborted\n",
+	      info->flash_id);
+      return ( 1 );
+    }
+  
+  prot = 0;
+  for (sect=s_first; sect<=s_last; ++sect) 
+    {
+      if ( info->protect[sect] ) 
+	{
+	  prot++;
+	}
+    }
+  
+  if ( prot ) 
+    {
+      printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+    } 
+  else 
+    {
+      printf ("\n");
+    }
+  
+  l_sect = -1;
+  
+  /* Disable interrupts which might cause a timeout here */
+  flag = disable_interrupts();
+  
+  addr[0x0555] = 0xAA;
+  addr[0x02AA] = 0x55;
+  addr[0x0555] = 0x80;
+  addr[0x0555] = 0xAA;
+  addr[0x02AA] = 0x55;
+  
+  /* Start erase on unprotected sectors */
+  for (sect = s_first; sect<=s_last; sect++) 
+    {
+      if (info->protect[sect] == 0)    /* not protected */
+	{
+	  addr = (volatile unsigned char *)(info->start[sect]);
+	  addr[0] = 0x30;
+	  l_sect = sect;
+	}
+    }
+  
+  /* re-enable interrupts if necessary */
+  if ( flag )
+    enable_interrupts();
+  
+  /* wait at least 80us - let's wait 1 ms */
+  udelay (1000);
+  
+  /*
+   * We wait for the last triggered sector
+   */
+  if ( l_sect < 0 )
+    goto DONE;
+  
+  start = get_timer (0);
+  last  = start;
+  addr = (volatile unsigned char *)(info->start[l_sect]);
+  while ( (addr[0] & 0x80) != 0x80 ) 
+    {
+      if ( (now = get_timer(start)) > CFG_FLASH_ERASE_TOUT ) 
+	{
+	  printf ("Timeout\n");
+	  return ( 1 );
+	}
+      /* show that we're waiting */
+      if ( (now - last) > 1000 )     /* every second */
+	{
+	  putc ('.');
+	  last = now;
+	}
+    }
+  
+DONE:
+  /* reset to read mode */
+  addr = (volatile unsigned char *)info->start[0];
+  addr[0] = 0xF0;	/* reset bank */
+  
+  printf (" done\n");
+  
+  return ( 0 );
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int 
+write_buff (flash_info_t  *info, 
+	    uchar         *src, 
+	    ulong          addr, 
+	    ulong          cnt)
+{
+  ulong cp, wp, data;
+  uchar bdata;
+  int i, l, rc;
+
+  if ( (info->flash_id & FLASH_TYPEMASK) == FLASH_AM040 )
+    {
+      /* Width of the data bus: 8 bits */
+
+      wp = addr;
+      
+      while ( cnt )
+	{
+	  bdata = *src++;
+	  
+	  if ( (rc = write_byte(info, wp, bdata)) != 0 )
+	    {
+	      return (rc);
+	    }
+	  
+	  ++wp;
+	  --cnt;
+	}
+
+      return ( 0 );
+    }
+  else
+    {
+      /* Width of the data bus: 32 bits */
+
+      wp = (addr & ~3);	/* get lower word aligned address */
+      
+      /*
+       * handle unaligned start bytes
+       */
+      if ( (l = addr - wp) != 0 ) 
+	{
+	  data = 0;
+	  for (i=0, cp=wp; i<l; ++i, ++cp) 
+	    {
+	      data = (data << 8) | (*(uchar *)cp);
+	    }
+	  for (; i<4 && cnt>0; ++i) 
+	    {
+	      data = (data << 8) | *src++;
+	      --cnt;
+	      ++cp;
+	    }
+	  for (; cnt==0 && i<4; ++i, ++cp) 
+	    {
+	      data = (data << 8) | (*(uchar *)cp);
+	    }
+	  
+	  if ( (rc = write_word(info, wp, data)) != 0 ) 
+	    {
+	      return (rc);
+	    }
+	  wp += 4;
+	}
+      
+      /*
+       * handle word aligned part
+       */
+      while ( cnt >= 4 ) 
+	{
+	  data = 0;
+	  for (i=0; i<4; ++i) 
+	    {
+	      data = (data << 8) | *src++;
+	    }
+	  if ( (rc = write_word(info, wp, data)) != 0 ) 
+	    {
+	      return (rc);
+	    }
+	  wp  += 4;
+	  cnt -= 4;
+	}
+      
+      if ( cnt == 0 ) 
+	{
+	  return (0);
+	}
+      
+      /*
+       * handle unaligned tail bytes
+       */
+      data = 0;
+      for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) 
+	{
+	  data = (data << 8) | *src++;
+	  --cnt;
+	}
+      for (; i<4; ++i, ++cp) 
+	{
+	  data = (data << 8) | (*(uchar *)cp);
+	}
+      
+      return (write_word(info, wp, data));
+    }
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int 
+write_word (flash_info_t  *info, 
+	    ulong          dest, 
+	    ulong          data)
+{
+  vu_long *addr = (vu_long*)(info->start[0]);
+  ulong start;
+  int flag;
+  
+  /* Check if Flash is (sufficiently) erased */
+  if ( (*((vu_long *)dest) & data) != data ) 
+    {
+      return (2);
+    }
+  /* Disable interrupts which might cause a timeout here */
+  flag = disable_interrupts();
+  
+  addr[0x0555] = 0x00AA00AA;
+  addr[0x02AA] = 0x00550055;
+  addr[0x0555] = 0x00A000A0;
+  
+  *((vu_long *)dest) = data;
+  
+  /* re-enable interrupts if necessary */
+  if ( flag )
+    enable_interrupts();
+
+  /* data polling for D7 */
+  start = get_timer (0);
+  while ( (*((vu_long *)dest) & 0x00800080) != (data & 0x00800080) ) 
+    {
+      if ( get_timer(start) > CFG_FLASH_WRITE_TOUT ) 
+	{
+	  return (1);
+	}
+    }
+
+  return (0);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a byte to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int 
+write_byte (flash_info_t  *info, 
+	    ulong          dest, 
+	    uchar          data)
+{
+  volatile unsigned char *addr = (volatile unsigned char *)(info->start[0]);
+  ulong  start;
+  int    flag;
+  
+  /* Check if Flash is (sufficiently) erased */
+  if ( (*((volatile unsigned char *)dest) & data) != data ) 
+    {
+      return (2);
+    }
+  /* Disable interrupts which might cause a timeout here */
+  flag = disable_interrupts();
+  
+  addr[0x0555] = 0xAA;
+  addr[0x02AA] = 0x55;
+  addr[0x0555] = 0xA0;
+  
+  *((volatile unsigned char *)dest) = data;
+  
+  /* re-enable interrupts if necessary */
+  if ( flag )
+    enable_interrupts();
+
+  /* data polling for D7 */
+  start = get_timer (0);
+  while ( (*((volatile unsigned char *)dest) & 0x80) != (data & 0x80) ) 
+    {
+      if ( get_timer(start) > CFG_FLASH_WRITE_TOUT ) 
+	{
+	  return (1);
+	}
+    }
+
+  return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/LEOX/elpt860/u-boot.lds b/board/LEOX/elpt860/u-boot.lds
new file mode 100644
index 00000000000..77945d0dd25
--- /dev/null
+++ b/board/LEOX/elpt860/u-boot.lds
@@ -0,0 +1,146 @@
+/*
+**=====================================================================
+**
+** Copyright (C) 2000, 2001, 2002, 2003
+** The LEOX team <team@leox.org>, http://www.leox.org
+**
+** LEOX.org is about the development of free hardware and software resources
+**   for system on chip.
+**
+** Description: U-Boot port on the LEOX's ELPT860 CPU board
+** ~~~~~~~~~~~
+**
+**=====================================================================
+**
+** This program is free software; you can redistribute it and/or
+** modify it under the terms of the GNU General Public License as
+** published by the Free Software Foundation; either version 2 of
+** the License, or (at your option) any later version.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+** GNU General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+** MA 02111-1307 USA
+**
+**=====================================================================
+*/
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mpc8xx/start.o			(.text)
+    common/dlmalloc.o			(.text)
+    lib_ppc/ppcstring.o			(.text)
+    lib_generic/vsprintf.o		(.text)
+    lib_generic/crc32.o			(.text)
+    lib_generic/zlib.o			(.text)
+    lib_generic/string.o		(.text)
+    lib_ppc/cache.o			(.text)
+    lib_ppc/extable.o			(.text)
+    lib_ppc/time.o			(.text)
+    lib_ppc/ticks.o			(.text)
+
+    . = env_offset;
+    common/environment.o		(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/LEOX/elpt860/u-boot.lds.debug b/board/LEOX/elpt860/u-boot.lds.debug
new file mode 100644
index 00000000000..b81235fd4bd
--- /dev/null
+++ b/board/LEOX/elpt860/u-boot.lds.debug
@@ -0,0 +1,140 @@
+/*
+**=====================================================================
+**
+** Copyright (C) 2000, 2001, 2002, 2003
+** The LEOX team <team@leox.org>, http://www.leox.org
+**
+** LEOX.org is about the development of free hardware and software resources
+**   for system on chip.
+**
+** Description: U-Boot port on the LEOX's ELPT860 CPU board
+** ~~~~~~~~~~~
+**
+**=====================================================================
+**
+** This program is free software; you can redistribute it and/or
+** modify it under the terms of the GNU General Public License as
+** published by the Free Software Foundation; either version 2 of
+** the License, or (at your option) any later version.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+** GNU General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+** MA 02111-1307 USA
+**
+**=====================================================================
+*/
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mpc8xx/start.o		(.text)
+    common/dlmalloc.o		(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o		(.text)
+
+    . = env_offset;
+    common/environment.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
+