LFU-330-47 arm: dts: Add iMX93 11x11 EVK support

Add DTS file for i.MX93 11x11 EVK board. Support basic functions
like: UART, USB, I2C, PMIC, FEC, eQoS, SD, eMMC, Sentinel MU,
pinctrl.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>

3 files changed, 698 insertions, 0 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 893dcfab3b..95624bd7b6 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -998,6 +998,9 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
 	imx8mq-pico-pi.dtb \
 	imx8mq-kontron-pitx-imx8m.dtb
 
+dtb-$(CONFIG_ARCH_IMX9) += \
+	imx93-11x11-evk.dtb
+
 dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \
 	imxrt1020-evk.dtb
 
diff --git a/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi b/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi
new file mode 100644
index 0000000000..6f02b38989
--- /dev/null
+++ b/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2022 NXP
+ */
+
+/ {
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog3>;
+		u-boot,dm-spl;
+	};
+
+	aliases {
+		usbgadget0 = &usbg1;
+		usbgadget1 = &usbg2;
+	};
+
+	usbg1: usbg1 {
+		compatible = "fsl,imx27-usb-gadget";
+		dr_mode = "peripheral";
+		chipidea,usb = <&usbotg1>;
+		status = "okay";
+	};
+
+	usbg2: usbg2 {
+		compatible = "fsl,imx27-usb-gadget";
+		dr_mode = "peripheral";
+		chipidea,usb = <&usbotg2>;
+		status = "okay";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
+
+&{/soc@0} {
+	u-boot,dm-pre-reloc;
+	u-boot,dm-spl;
+};
+
+&aips1 {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&aips2 {
+	u-boot,dm-spl;
+};
+
+&aips3 {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
+
+&reg_usdhc2_vmmc {
+	u-boot,off-on-delay-us = <20000>;
+	u-boot,dm-spl;
+};
+
+&pinctrl_reg_usdhc2_vmmc {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2_gpio {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&lpuart1 {
+	u-boot,dm-spl;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+	fsl,signal-voltage-switch-extra-delay-ms = <8>;
+};
+
+&lpi2c2 {
+	u-boot,dm-spl;
+};
+
+&{/soc@0/bus@44000000/i2c@44350000/pmic@25} {
+	u-boot,dm-spl;
+};
+
+&{/soc@0/bus@44000000/i2c@44350000/pmic@25/regulators} {
+	u-boot,dm-spl;
+};
+
+&pinctrl_lpi2c2 {
+	u-boot,dm-spl;
+};
+
+&fec {
+	phy-reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <15>;
+	phy-reset-post-delay = <100>;
+};
+
+&eqos {
+	compatible = "fsl,imx-eqos";
+};
+
+&ethphy1 {
+	reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
+	reset-assert-us = <15000>;
+	reset-deassert-us = <100000>;
+};
+
+&usbotg1 {
+	status = "okay";
+	extcon = <&ptn5110>;
+};
+
+&usbotg2 {
+	status = "okay";
+	extcon = <&ptn5110_2>;
+};
+
+&s4muap {
+	u-boot,dm-spl;
+	status = "okay";
+};
diff --git a/arch/arm/dts/imx93-11x11-evk.dts b/arch/arm/dts/imx93-11x11-evk.dts
new file mode 100644
index 0000000000..5bdc62a67a
--- /dev/null
+++ b/arch/arm/dts/imx93-11x11-evk.dts
@@ -0,0 +1,538 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 NXP
+ */
+
+/dts-v1/;
+
+#include "imx93.dtsi"
+
+/{
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		i2c8 = &flexio_i2c_master;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		audio: audio@a4120000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4120000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&adp5585gpio 5 GPIO_ACTIVE_LOW>;
+		enable-active-low;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usdhc3_pwrseq: usdhc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pcal6524 20 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+};
+
+&lpi2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110";
+		reg = <0x50>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		status = "okay";
+
+		port {
+			typec1_dr_sw: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+		};
+	};
+
+	ptn5110_2: tcpc@51 {
+		compatible = "nxp,ptn5110";
+		reg = <0x51>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		status = "okay";
+
+		port {
+			typec2_dr_sw: endpoint {
+				remote-endpoint = <&usb2_drd_sw>;
+			};
+		};
+
+		typec2_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+		};
+	};
+};
+
+&lpi2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-1 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		interrupt-parent = <&pcal6524>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4{
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5{
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	pcal6524: gpio@22 {
+		compatible = "nxp,pcal6524";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6524>;
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	adp5585gpio: gpio@34 {
+		compatible = "adp5585";
+		reg = <0x34>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&lpuart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "disabled";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb2_drd_sw: endpoint {
+			remote-endpoint = <&typec2_dr_sw>;
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+	no-sdio;
+	no-mmc;
+};
+
+&usdhc3 {
+	status = "disabled";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy2>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy2: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+			eee-broken-1000t;
+			rtl821x,aldps-disable;
+			rtl821x,clkout-disable;
+		};
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			rtl821x,aldps-disable;
+			rtl821x,clkout-disable;
+		};
+	};
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "disabled";
+
+	flash0: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	status = "okay";
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO25__CAN2_TX	0x139e
+			MX93_PAD_GPIO_IO27__CAN2_RX	0x139e
+		>;
+	};
+
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B	0x42
+			MX93_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B	0x42
+			MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK	0x42
+			MX93_PAD_SD1_STROBE__FLEXSPI1_A_DQS	0x42
+			MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00	0x42
+			MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01	0x42
+			MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02	0x42
+			MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03	0x42
+			MX93_PAD_SD1_DATA4__FLEXSPI1_A_DATA04	0x42
+			MX93_PAD_SD1_DATA5__FLEXSPI1_A_DATA05	0x42
+			MX93_PAD_SD1_DATA6__FLEXSPI1_A_DATA06	0x42
+			MX93_PAD_SD1_DATA7__FLEXSPI1_A_DATA07	0x42
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x57e
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x57e
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x57e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x57e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x57e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x57e
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x5fe
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x57e
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x57e
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x57e
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x57e
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x57e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x57e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x57e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x57e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x57e
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x5fe
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x57e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL			0x40000b9e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL			0x40000b9e
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX93_PAD_UART2_TXD__LPUART2_TX			0x31e
+			MX93_PAD_UART2_RXD__LPUART2_RX			0x31e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK			0x17fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD			0x13fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0		0x13fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1        	0x13fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2        	0x13fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3        	0x13fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4        	0x13fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5        	0x13fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6        	0x13fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7        	0x13fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE		0x17fe
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00			0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x17fe
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x13fe
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x13fe
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1        	0x13fe
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2        	0x13fe
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3        	0x13fe
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+};
+
+&wdog3 {
+	status = "okay";
+};