Merge branch '2019-02-01-master-imports'

- Various TI platforms have been updated and DTS files re-synced and
  options disabled if not used or migrated to the DM versions
- Improvements to the dumpimage tool
- Rename SPL FAT/EXT filesystem support symbols for consistency and then
  allow them to be used to save more space in SPL.
- More lmb fixes
- Partial migration of CONFIG_BUILD_TARGET

17 files changed, 705 insertions, 27 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 46f1d693dc..d4eae02d89 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -194,6 +194,7 @@ dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-bone.dtb \
 	am335x-icev2.dtb \
 	am335x-pxm50.dtb \
 	am335x-rut.dtb \
+	am335x-shc.dtb \
 	am335x-pdu001.dtb \
 	am335x-chiliboard.dtb \
 	am335x-sl50.dtb \
diff --git a/arch/arm/dts/am335x-evm-u-boot.dtsi b/arch/arm/dts/am335x-evm-u-boot.dtsi
index 0341600342..b6b97ed16d 100644
--- a/arch/arm/dts/am335x-evm-u-boot.dtsi
+++ b/arch/arm/dts/am335x-evm-u-boot.dtsi
@@ -7,3 +7,7 @@
 &mmc3 {
 	status = "disabled";
 };
+
+&usb0 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm/dts/am335x-shc-u-boot.dtsi b/arch/arm/dts/am335x-shc-u-boot.dtsi
new file mode 100644
index 0000000000..2975839ea7
--- /dev/null
+++ b/arch/arm/dts/am335x-shc-u-boot.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ */
+
+/ {
+	ocp {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&l4_wkup {
+	u-boot,dm-pre-reloc;
+};
+
+&scm {
+	u-boot,dm-pre-reloc;
+};
+
+&am33xx_pinmux {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0_pins {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&mmc1 {
+	u-boot,dm-pre-reloc;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&emmc_pins {
+	u-boot,dm-pre-reloc;
+};
+
+&mmc2 {
+	u-boot,dm-pre-reloc;
+};
+
+&mmc1_pins {
+	u-boot,dm-pre-reloc;
+};
+
+&mmc3 {
+	status = "disabled";
+};
diff --git a/arch/arm/dts/am335x-shc.dts b/arch/arm/dts/am335x-shc.dts
new file mode 100644
index 0000000000..5cdd309b90
--- /dev/null
+++ b/arch/arm/dts/am335x-shc.dts
@@ -0,0 +1,575 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * support for the bosch am335x based shc c3 board
+ *
+ * Copyright, (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Bosch SHC";
+	compatible = "ti,am335x-shc", "ti,am335x-bone", "ti,am33xx";
+
+	aliases {
+		mmcblk0 = &mmc1;
+		mmcblk1 = &mmc2;
+	};
+
+	cpus {
+		cpu@0 {
+			/*
+			 * To consider voltage drop between PMIC and SoC,
+			 * tolerance value is reduced to 2% from 4% and
+			 * voltage value is increased as a precaution.
+			 */
+			operating-points = <
+				/* kHz    uV */
+				594000  1225000
+				294000  1125000
+			>;
+			voltage-tolerance = <2>; /* 2 percentage */
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		back_button {
+			label = "Back Button";
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_BACK>;
+			debounce-interval = <1000>;
+			wakeup-source;
+		};
+
+		front_button {
+			label = "Front Button";
+			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_FRONT>;
+			debounce-interval = <1000>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "shc:power:red";
+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "shc:power:bl";
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+			default-state = "on";
+		};
+
+		led3 {
+			label = "shc:lan:red";
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led4 {
+			label = "shc:lan:bl";
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led5 {
+			label = "shc:cloud:red";
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led6 {
+			label = "shc:cloud:bl";
+			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&aes {
+	status = "okay";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethernetphy0: ethernet-phy@0 {
+		reg = <0>;
+		smsc,disable-energy-detect;
+	};
+};
+
+&epwmss1 {
+	status = "okay";
+
+	ehrpwm1: pwm@48302200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ehrpwm1_pins>;
+		status = "okay";
+	};
+};
+
+&gpio1 {
+	hmtc_rst {
+		gpio-hog;
+		gpios = <24 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "homematic_reset";
+	};
+
+	hmtc_prog {
+		gpio-hog;
+		gpios = <27 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "homematic_program";
+	};
+};
+
+&gpio3 {
+	zgb_rst {
+		gpio-hog;
+		gpios = <18 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "zigbee_reset";
+	};
+
+	zgb_boot {
+		gpio-hog;
+		gpios = <19 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "zigbee_boot";
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+	at24@50 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+	slaves = <1>;
+	cpsw_emac0: slave@4a100200  {
+		phy_id = <&davinci_mdio>, <0>;
+		phy-mode = "mii";
+		phy-handle = <&ethernetphy0>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	bus-width = <0x4>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	max-frequency = <26000000>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	max-frequency = <26000000>;
+	sd-uhs-sdr25;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+	bus-width = <4>;
+	cap-power-off-card;
+	max-frequency = <26000000>;
+	sd-uhs-sdr25;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&rtc {
+	ti,no-init;
+};
+
+&sham {
+	status = "okay";
+};
+
+&tps {
+	compatible = "ti,tps65217";
+	ti,pmic-shutdown-controller;
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dcdc1_reg: regulator@0 {
+			reg = <0>;
+			regulator-name = "vdds_dpr";
+			regulator-compatible = "dcdc1";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1450000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			reg = <1>;
+			/*
+			 * VDD_MPU voltage limits 0.95V - 1.26V with
+			 * +/-4% tolerance
+			 */
+			regulator-compatible = "dcdc2";
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1375000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-ramp-delay = <70000>;
+		};
+
+		dcdc3_reg: regulator@2 {
+			reg = <2>;
+			/*
+			 * VDD_CORE voltage limits 0.95V - 1.1V with
+			 * +/-4% tolerance
+			 */
+			regulator-name = "vdd_core";
+			regulator-compatible = "dcdc3";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1125000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			reg = <3>;
+			regulator-name = "vio,vrtc,vdds";
+			regulator-compatible = "ldo1";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			reg = <4>;
+			regulator-name = "vdd_3v3aux";
+			regulator-compatible = "ldo2";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			reg = <5>;
+			regulator-name = "vdd_1v8";
+			regulator-compatible = "ldo3";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			reg = <6>;
+			regulator-name = "vdd_3v3a";
+			regulator-compatible = "ldo4";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin>;
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			/* xdma_event_intr1.clkout2 */
+			AM33XX_IOPAD(0x9b4, PIN_INPUT | MUX_MODE6)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	ehrpwm1_pins: pinmux_ehrpwm1 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.gpio1_19 */
+		>;
+	};
+
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x880, PIN_INPUT | MUX_MODE2)
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE5)
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x830, PIN_INPUT | MUX_MODE3)
+			AM33XX_IOPAD(0x834, PIN_INPUT | MUX_MODE3)
+			AM33XX_IOPAD(0x838, PIN_INPUT | MUX_MODE3)
+			AM33XX_IOPAD(0x83c, PIN_INPUT | MUX_MODE3)
+			AM33XX_IOPAD(0x888, PIN_INPUT | MUX_MODE3)
+			AM33XX_IOPAD(0x88c, PIN_INPUT | MUX_MODE3)
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x968, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x97C, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)
+			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)
+		>;
+	};
+
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)
+			AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE6)
+		>;
+	};
+
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x844, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLUP | MUX_MODE7)
+			AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x86c, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7)
+			AM33XX_IOPAD(0x87c, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x894, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x958, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLUP | MUX_MODE7)
+			AM33XX_IOPAD(0x9a0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+};
diff --git a/arch/arm/dts/am3517-evm.dts b/arch/arm/dts/am3517-evm.dts
index 1e2bb68231..3527c0f2df 100644
--- a/arch/arm/dts/am3517-evm.dts
+++ b/arch/arm/dts/am3517-evm.dts
@@ -20,6 +20,10 @@
 		display0 = &lcd0;
 	};
 
+	chosen {
+		stdout-path = &uart3;
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
diff --git a/arch/arm/dts/am4372-u-boot.dtsi b/arch/arm/dts/am4372-u-boot.dtsi
index 99922ca030..986ae17470 100644
--- a/arch/arm/dts/am4372-u-boot.dtsi
+++ b/arch/arm/dts/am4372-u-boot.dtsi
@@ -3,6 +3,13 @@
  * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
  */
 
+/{
+	aliases {
+		usb0 = &usb1;
+		usb1 = &usb2;
+	};
+};
+
 &am43xx_control_usb2phy1 {
 	compatible = "ti,control-phy-usb2-am437", "syscon";
 };
@@ -38,3 +45,23 @@
 &ocp2scp0 {
 	u-boot,dm-spl;
 };
+
+&dwc3_2 {
+	u-boot,dm-spl;
+};
+
+&usb2 {
+	u-boot,dm-spl;
+};
+
+&usb2_phy2 {
+	u-boot,dm-spl;
+};
+
+&am43xx_control_usb2phy2 {
+	u-boot,dm-spl;
+};
+
+&ocp2scp1 {
+	u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/da850-evm.dts b/arch/arm/dts/da850-evm.dts
index a3c9b34672..f04bc3e153 100644
--- a/arch/arm/dts/da850-evm.dts
+++ b/arch/arm/dts/da850-evm.dts
@@ -94,6 +94,28 @@
 		regulator-boot-on;
 	};
 
+	baseboard_3v3: fixedregulator-3v3 {
+		/* TPS73701DCQ */
+		compatible = "regulator-fixed";
+		regulator-name = "baseboard_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vbat>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	baseboard_1v8: fixedregulator-1v8 {
+		/* TPS73701DCQ */
+		compatible = "regulator-fixed";
+		regulator-name = "baseboard_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vbat>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	backlight_lcd: backlight-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "lcd_backlight_pwr";
@@ -105,7 +127,7 @@
 
 	sound {
 		compatible = "simple-audio-card";
-		simple-audio-card,name = "DA850/OMAP-L138 EVM";
+		simple-audio-card,name = "DA850-OMAPL138 EVM";
 		simple-audio-card,widgets =
 			"Line", "Line In",
 			"Line", "Line Out";
@@ -210,10 +232,9 @@
 
 		/* Regulators */
 		IOVDD-supply = <&vdcdc2_reg>;
-		/* Derived from VBAT: Baseboard 3.3V / 1.8V */
-		AVDD-supply = <&vbat>;
-		DRVDD-supply = <&vbat>;
-		DVDD-supply = <&vbat>;
+		AVDD-supply = <&baseboard_3v3>;
+		DRVDD-supply = <&baseboard_3v3>;
+		DVDD-supply = <&baseboard_1v8>;
 	};
 	tca6416: gpio@20 {
 		compatible = "ti,tca6416";
diff --git a/arch/arm/mach-imx/spl.c b/arch/arm/mach-imx/spl.c
index ebd8ff9290..9f1e0f6a72 100644
--- a/arch/arm/mach-imx/spl.c
+++ b/arch/arm/mach-imx/spl.c
@@ -181,7 +181,7 @@ u32 spl_boot_mode(const u32 boot_device)
 	case BOOT_DEVICE_MMC1:
 	case BOOT_DEVICE_MMC2:
 	case BOOT_DEVICE_MMC2_2:
-#if defined(CONFIG_SPL_FAT_SUPPORT)
+#if defined(CONFIG_SPL_FS_FAT)
 		return MMCSD_MODE_FS;
 #elif defined(CONFIG_SUPPORT_EMMC_BOOT)
 		return MMCSD_MODE_EMMCBOOT;
diff --git a/arch/arm/mach-k3/am6_init.c b/arch/arm/mach-k3/am6_init.c
index e2fe00c422..a5553190b4 100644
--- a/arch/arm/mach-k3/am6_init.c
+++ b/arch/arm/mach-k3/am6_init.c
@@ -106,7 +106,7 @@ u32 spl_boot_mode(const u32 boot_device)
 #endif
 
 	/* Everything else use filesystem if available */
-#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
 	return MMCSD_MODE_FS;
 #else
 	return MMCSD_MODE_RAW;
diff --git a/arch/arm/mach-mvebu/include/mach/config.h b/arch/arm/mach-mvebu/include/mach/config.h
index f165d10018..e3235fc67e 100644
--- a/arch/arm/mach-mvebu/include/mach/config.h
+++ b/arch/arm/mach-mvebu/include/mach/config.h
@@ -40,11 +40,6 @@
 #define	CONFIG_SYS_KWD_CONFIG	arch/arm/mach-mvebu/kwbimage.cfg
 #endif /* CONFIG_SYS_KWD_CONFIG */
 
-/* Add target to build it automatically upon "make" */
-#ifdef CONFIG_SPL
-#define CONFIG_BUILD_TARGET	"u-boot-spl.kwb"
-#endif
-
 /* end of 16M scrubbed by training in bootrom */
 #define CONFIG_SYS_INIT_SP_ADDR		0x00FF0000
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index d9bdcb355a..1cac4437d7 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -13,8 +13,8 @@ config OMAP34XX
 	select ARM_ERRATA_725233
 	select USE_TINY_PRINTF
 	imply NAND_OMAP_GPMC
-	imply SPL_EXT_SUPPORT
-	imply SPL_FAT_SUPPORT
+	imply SPL_FS_EXT4
+	imply SPL_FS_FAT
 	imply SPL_GPIO_SUPPORT
 	imply SPL_I2C_SUPPORT
 	imply SPL_LIBCOMMON_SUPPORT
@@ -35,8 +35,8 @@ config OMAP44XX
 	imply NAND_OMAP_ELM
 	imply NAND_OMAP_GPMC
 	imply SPL_DISPLAY_PRINT
-	imply SPL_EXT_SUPPORT
-	imply SPL_FAT_SUPPORT
+	imply SPL_FS_EXT4
+	imply SPL_FS_FAT
 	imply SPL_GPIO_SUPPORT
 	imply SPL_I2C_SUPPORT
 	imply SPL_LIBCOMMON_SUPPORT
@@ -59,8 +59,8 @@ config OMAP54XX
 	imply NAND_OMAP_GPMC
 	imply SPL_DISPLAY_PRINT
 	imply SPL_ENV_SUPPORT
-	imply SPL_EXT_SUPPORT
-	imply SPL_FAT_SUPPORT
+	imply SPL_FS_EXT4
+	imply SPL_FS_FAT
 	imply SPL_GPIO_SUPPORT
 	imply SPL_I2C_SUPPORT
 	imply SPL_LIBCOMMON_SUPPORT
diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig
index 4f15346c86..4d47d09637 100644
--- a/arch/arm/mach-omap2/am33xx/Kconfig
+++ b/arch/arm/mach-omap2/am33xx/Kconfig
@@ -38,8 +38,8 @@ config TARGET_AM335X_EVM
 	imply SPL_DM
 	imply SPL_DM_SEQ_ALIAS
 	imply SPL_ENV_SUPPORT
-	imply SPL_EXT_SUPPORT
-	imply SPL_FAT_SUPPORT
+	imply SPL_FS_EXT4
+	imply SPL_FS_FAT
 	imply SPL_GPIO_SUPPORT
 	imply SPL_I2C_SUPPORT
 	imply SPL_LIBCOMMON_SUPPORT
@@ -232,8 +232,8 @@ config TARGET_AM43XX_EVM
 	imply DM_SPI_FLASH
 	imply SPI_FLASH_BAR
 	imply SPL_ENV_SUPPORT
-	imply SPL_EXT_SUPPORT
-	imply SPL_FAT_SUPPORT
+	imply SPL_FS_EXT4
+	imply SPL_FS_FAT
 	imply SPL_GPIO_SUPPORT
 	imply SPL_I2C_SUPPORT
 	imply SPL_LIBCOMMON_SUPPORT
diff --git a/arch/arm/mach-socfpga/spl_a10.c b/arch/arm/mach-socfpga/spl_a10.c
index 3ea64f7e94..c97eacb424 100644
--- a/arch/arm/mach-socfpga/spl_a10.c
+++ b/arch/arm/mach-socfpga/spl_a10.c
@@ -58,7 +58,7 @@ u32 spl_boot_device(void)
 #ifdef CONFIG_SPL_MMC_SUPPORT
 u32 spl_boot_mode(const u32 boot_device)
 {
-#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
 	return MMCSD_MODE_FS;
 #else
 	return MMCSD_MODE_RAW;
diff --git a/arch/arm/mach-socfpga/spl_gen5.c b/arch/arm/mach-socfpga/spl_gen5.c
index ccdc661d05..4c9f7997be 100644
--- a/arch/arm/mach-socfpga/spl_gen5.c
+++ b/arch/arm/mach-socfpga/spl_gen5.c
@@ -55,7 +55,7 @@ u32 spl_boot_device(void)
 #ifdef CONFIG_SPL_MMC_SUPPORT
 u32 spl_boot_mode(const u32 boot_device)
 {
-#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
 	return MMCSD_MODE_FS;
 #else
 	return MMCSD_MODE_RAW;
diff --git a/arch/arm/mach-socfpga/spl_s10.c b/arch/arm/mach-socfpga/spl_s10.c
index cc5dc4f3d7..a3db20a819 100644
--- a/arch/arm/mach-socfpga/spl_s10.c
+++ b/arch/arm/mach-socfpga/spl_s10.c
@@ -33,7 +33,7 @@ u32 spl_boot_device(void)
 #ifdef CONFIG_SPL_MMC_SUPPORT
 u32 spl_boot_mode(const u32 boot_device)
 {
-#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
 	return MMCSD_MODE_FS;
 #else
 	return MMCSD_MODE_RAW;
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 21dfebf5c0..79f831e6df 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -3,7 +3,7 @@ if ARCH_ZYNQ
 config SPL_LDSCRIPT
 	default "arch/arm/mach-zynq/u-boot-spl.lds"
 
-config SPL_FAT_SUPPORT
+config SPL_FS_FAT
 	default y
 
 config SPL_LIBCOMMON_SUPPORT
diff --git a/arch/arm/mach-zynqmp/Kconfig b/arch/arm/mach-zynqmp/Kconfig
index 8a311e1c89..e9f7e7e489 100644
--- a/arch/arm/mach-zynqmp/Kconfig
+++ b/arch/arm/mach-zynqmp/Kconfig
@@ -1,6 +1,6 @@
 if ARCH_ZYNQMP
 
-config SPL_FAT_SUPPORT
+config SPL_FS_FAT
 	default y
 
 config SPL_LIBCOMMON_SUPPORT