ARM: uniphier: move pin-mux code into pin_init function

The code in uniphier_sld3_sbc_init() is pin-muxing, so it would
be a better fit in uniphier_sld3_early_pin_init().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

5 files changed, 5 insertions, 27 deletions

diff --git a/arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-sld3.c b/arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-sld3.c
index 22c07fbfe1b..6c5d58f856b 100644
--- a/arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-sld3.c
+++ b/arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-sld3.c
@@ -22,5 +22,7 @@ int uniphier_sld3_early_pin_init(const struct uniphier_board_data *bd)
 	sg_set_pinsel(102, 2, 4, 4);	/* TXD2 */
 #endif
 
+	sg_set_pinsel(99, 1, 4, 4);	/* GPIO26 -> EA24 */
+
 	return 0;
 }
diff --git a/arch/arm/mach-uniphier/init.h b/arch/arm/mach-uniphier/init.h
index 5a0ebeb1b15..ab0a68d83d8 100644
--- a/arch/arm/mach-uniphier/init.h
+++ b/arch/arm/mach-uniphier/init.h
@@ -37,7 +37,6 @@ int uniphier_ld20_init(const struct uniphier_board_data *bd);
 #if defined(CONFIG_MICRO_SUPPORT_CARD)
 int uniphier_sbc_init_admulti(const struct uniphier_board_data *bd);
 int uniphier_sbc_init_savepin(const struct uniphier_board_data *bd);
-int uniphier_sld3_sbc_init(const struct uniphier_board_data *bd);
 int uniphier_ld4_sbc_init(const struct uniphier_board_data *bd);
 int uniphier_pxs2_sbc_init(const struct uniphier_board_data *bd);
 #else
@@ -53,11 +52,6 @@ static inline int uniphier_sbc_init_savepin(
 	return 0;
 }
 
-static inline int uniphier_sld3_sbc_init(const struct uniphier_board_data *bd)
-{
-	return 0;
-}
-
 static inline int uniphier_ld4_sbc_init(const struct uniphier_board_data *bd)
 {
 	return 0;
diff --git a/arch/arm/mach-uniphier/init/init-sld3.c b/arch/arm/mach-uniphier/init/init-sld3.c
index 473e0c8831b..50fcbb09b85 100644
--- a/arch/arm/mach-uniphier/init/init-sld3.c
+++ b/arch/arm/mach-uniphier/init/init-sld3.c
@@ -15,7 +15,8 @@ int uniphier_sld3_init(const struct uniphier_board_data *bd)
 	uniphier_sld3_bcu_init(bd);
 
 	uniphier_sbc_init_admulti(bd);
-	uniphier_sld3_sbc_init(bd);
+
+	uniphier_sld3_early_pin_init(bd);
 
 	support_card_reset();
 
@@ -34,8 +35,6 @@ int uniphier_sld3_init(const struct uniphier_board_data *bd)
 
 	led_puts("L2");
 
-	uniphier_sld3_early_pin_init(bd);
-
 	led_puts("L3");
 
 #ifdef CONFIG_SPL_SERIAL_SUPPORT
diff --git a/arch/arm/mach-uniphier/sbc/Makefile b/arch/arm/mach-uniphier/sbc/Makefile
index 236f13691c7..38da253975c 100644
--- a/arch/arm/mach-uniphier/sbc/Makefile
+++ b/arch/arm/mach-uniphier/sbc/Makefile
@@ -2,7 +2,7 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-$(CONFIG_ARCH_UNIPHIER_SLD3)	+= sbc-admulti.o sbc-sld3.o
+obj-$(CONFIG_ARCH_UNIPHIER_SLD3)	+= sbc-admulti.o
 obj-$(CONFIG_ARCH_UNIPHIER_LD4)		+= sbc-savepin.o sbc-ld4.o
 obj-$(CONFIG_ARCH_UNIPHIER_PRO4)	+= sbc-savepin.o
 obj-$(CONFIG_ARCH_UNIPHIER_SLD8)	+= sbc-savepin.o sbc-ld4.o
diff --git a/arch/arm/mach-uniphier/sbc/sbc-sld3.c b/arch/arm/mach-uniphier/sbc/sbc-sld3.c
deleted file mode 100644
index ac9d0301be4..00000000000
--- a/arch/arm/mach-uniphier/sbc/sbc-sld3.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <linux/io.h>
-
-#include "../init.h"
-#include "../sg-regs.h"
-
-int uniphier_sld3_sbc_init(const struct uniphier_board_data *bd)
-{
-	sg_set_pinsel(99, 1, 4, 4);	/* GPIO26 -> EA24 */
-
-	return 0;
-}