summaryrefslogtreecommitdiff
path: root/arch/powerpc/cpu
diff options
context:
space:
mode:
authoryork <yorksun@freescale.com>2010-07-02 22:25:53 +0000
committerKumar Gala <galak@kernel.crashing.org>2010-07-26 13:16:09 -0500
commit5800e7ab32c200836e81ab2384817d93105561c5 (patch)
treea8022cbb490f4abbe4aba4480928abde59c70404 /arch/powerpc/cpu
parent076bff8f4746baf7c83b96049d97e9dd4454dace (diff)
powerpc/8xxx: Enable quad-rank DIMMs.
Previous code presumes each DIMM has up to two rank (chip select). Newer DDR controller supports up to four chip select on one DIMM. Signed-off-by: York Sun <yorksun@freescale.com>
Diffstat (limited to 'arch/powerpc/cpu')
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c52
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c12
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/options.c17
3 files changed, 60 insertions, 21 deletions
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
index 69c1c7cb803..6e73b1d3143 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -93,7 +93,7 @@ static inline unsigned int compute_cas_write_latency(void)
}
/* Chip Select Configuration (CSn_CONFIG) */
-static void set_csn_config(int i, fsl_ddr_cfg_regs_t *ddr,
+static void set_csn_config(int dimm_number, int i, fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const dimm_params_t *dimm_params)
{
@@ -106,28 +106,49 @@ static void set_csn_config(int i, fsl_ddr_cfg_regs_t *ddr,
unsigned int ba_bits_cs_n = 0; /* Num of bank bits for SDRAM on CSn */
unsigned int row_bits_cs_n = 0; /* Num of row bits for SDRAM on CSn */
unsigned int col_bits_cs_n = 0; /* Num of ocl bits for SDRAM on CSn */
+ int go_config = 0;
/* Compute CS_CONFIG only for existing ranks of each DIMM. */
- if ((((i&1) == 0)
- && (dimm_params[i/2].n_ranks == 1))
- || (dimm_params[i/2].n_ranks == 2)) {
- unsigned int n_banks_per_sdram_device;
- cs_n_en = 1;
- if (i == 0) {
+ switch (i) {
+ case 0:
+ if (dimm_params[dimm_number].n_ranks > 0) {
+ go_config = 1;
/* These fields only available in CS0_CONFIG */
intlv_en = popts->memctl_interleaving;
intlv_ctl = popts->memctl_interleaving_mode;
}
+ break;
+ case 1:
+ if ((dimm_number == 0 && dimm_params[0].n_ranks > 1) || \
+ (dimm_number == 1 && dimm_params[1].n_ranks > 0))
+ go_config = 1;
+ break;
+ case 2:
+ if ((dimm_number == 0 && dimm_params[0].n_ranks > 2) || \
+ (dimm_number > 1 && dimm_params[dimm_number].n_ranks > 0))
+ go_config = 1;
+ break;
+ case 3:
+ if ((dimm_number == 0 && dimm_params[0].n_ranks > 3) || \
+ (dimm_number == 1 && dimm_params[1].n_ranks > 1) || \
+ (dimm_number == 3 && dimm_params[3].n_ranks > 0))
+ go_config = 1;
+ break;
+ default:
+ break;
+ }
+ if (go_config) {
+ unsigned int n_banks_per_sdram_device;
+ cs_n_en = 1;
ap_n_en = popts->cs_local_opts[i].auto_precharge;
odt_rd_cfg = popts->cs_local_opts[i].odt_rd_cfg;
odt_wr_cfg = popts->cs_local_opts[i].odt_wr_cfg;
n_banks_per_sdram_device
- = dimm_params[i/2].n_banks_per_sdram_device;
+ = dimm_params[dimm_number].n_banks_per_sdram_device;
ba_bits_cs_n = __ilog2(n_banks_per_sdram_device) - 2;
- row_bits_cs_n = dimm_params[i/2].n_row_addr - 12;
- col_bits_cs_n = dimm_params[i/2].n_col_addr - 8;
+ row_bits_cs_n = dimm_params[dimm_number].n_row_addr - 12;
+ col_bits_cs_n = dimm_params[dimm_number].n_col_addr - 8;
}
-
ddr->cs[i].config = (0
| ((cs_n_en & 0x1) << 31)
| ((intlv_en & 0x3) << 29)
@@ -521,6 +542,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
unsigned int d_init; /* DRAM data initialization */
unsigned int rcw_en = 0; /* Register Control Word Enable */
unsigned int md_en = 0; /* Mirrored DIMM Enable */
+ unsigned int qd_en = 0; /* quad-rank DIMM Enable */
dll_rst_dis = 1; /* Make this configurable */
dqs_cfg = popts->DQS_config;
@@ -562,6 +584,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
#if defined(CONFIG_FSL_DDR3)
md_en = popts->mirrored_dimm;
#endif
+ qd_en = popts->quad_rank_present ? 1 : 0;
ddr->ddr_sdram_cfg_2 = (0
| ((frc_sr & 0x1) << 31)
| ((sr_ie & 0x1) << 30)
@@ -569,6 +592,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
| ((dqs_cfg & 0x3) << 26)
| ((odt_cfg & 0x3) << 21)
| ((num_pr & 0xf) << 12)
+ | (qd_en << 9)
| ((obc_cfg & 0x1) << 6)
| ((ap_en & 0x1) << 5)
| ((d_init & 0x1) << 4)
@@ -1219,12 +1243,12 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
* But we need to set the ODT_RD_CFG and
* ODT_WR_CFG for CS1_CONFIG here.
*/
- set_csn_config(i, ddr, popts, dimm_params);
+ set_csn_config(dimm_number, i, ddr, popts, dimm_params);
continue;
}
if (dimm_params[dimm_number].n_ranks == 0) {
debug("Skipping setup of CS%u "
- "because n_ranks on DIMM %u is 0\n", i, i/2);
+ "because n_ranks on DIMM %u is 0\n", i, dimm_number);
continue;
}
if (popts->memctl_interleaving && popts->ba_intlv_ctl) {
@@ -1364,7 +1388,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
);
debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds);
- set_csn_config(i, ddr, popts, dimm_params);
+ set_csn_config(dimm_number, i, ddr, popts, dimm_params);
set_csn_config_2(i, ddr);
}
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
index e888e3ea562..ce6c148d096 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
@@ -118,6 +118,18 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
temp1++;
continue;
}
+ if (dimm_params[i].n_ranks == 4 && i != 0) {
+ printf("Found Quad-rank DIMM in wrong bank, ignored."
+ " Software may not run as expected.\n");
+ temp1++;
+ continue;
+ }
+ if (dimm_params[i].n_ranks == 4 && \
+ CONFIG_CHIP_SELECTS_PER_CTRL/CONFIG_DIMM_SLOTS_PER_CTLR < 4) {
+ printf("Found Quad-rank DIMM, not able to support.");
+ temp1++;
+ continue;
+ }
/*
* Find minimum tCKmax_ps to find fastest slow speed,
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
index ebbdb69c0df..1d5f3e2cdd4 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
@@ -274,14 +274,14 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
case FSL_DDR_CS0_CS1_CS2_CS3:
#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
- if (pdimm[0].n_ranks != 4) {
+ if (pdimm[0].n_ranks < 4) {
popts->ba_intlv_ctl = 0;
printf("Not enough bank(chip-select) for "
"CS0+CS1+CS2+CS3 on controller %d, "
"force non-interleaving!\n", ctrl_num);
}
#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
- if ((pdimm[0].n_ranks != 2) && (pdimm[1].n_ranks != 2)) {
+ if ((pdimm[0].n_ranks < 2) && (pdimm[1].n_ranks < 2)) {
popts->ba_intlv_ctl = 0;
printf("Not enough bank(chip-select) for "
"CS0+CS1+CS2+CS3 on controller %d, "
@@ -296,7 +296,7 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
#endif
break;
case FSL_DDR_CS0_CS1:
- if (pdimm[0].n_ranks != 2) {
+ if (pdimm[0].n_ranks < 2) {
popts->ba_intlv_ctl = 0;
printf("Not enough bank(chip-select) for "
"CS0+CS1 on controller %d, "
@@ -305,13 +305,13 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
break;
case FSL_DDR_CS2_CS3:
#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
- if (pdimm[0].n_ranks != 4) {
+ if (pdimm[0].n_ranks < 4) {
popts->ba_intlv_ctl = 0;
printf("Not enough bank(chip-select) for CS2+CS3 "
"on controller %d, force non-interleaving!\n", ctrl_num);
}
#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
- if (pdimm[1].n_ranks != 2) {
+ if (pdimm[1].n_ranks < 2) {
popts->ba_intlv_ctl = 0;
printf("Not enough bank(chip-select) for CS2+CS3 "
"on controller %d, force non-interleaving!\n", ctrl_num);
@@ -320,14 +320,14 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
break;
case FSL_DDR_CS0_CS1_AND_CS2_CS3:
#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
- if (pdimm[0].n_ranks != 4) {
+ if (pdimm[0].n_ranks < 4) {
popts->ba_intlv_ctl = 0;
printf("Not enough bank(CS) for CS0+CS1 and "
"CS2+CS3 on controller %d, "
"force non-interleaving!\n", ctrl_num);
}
#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
- if ((pdimm[0].n_ranks != 2)||(pdimm[1].n_ranks != 2)) {
+ if ((pdimm[0].n_ranks < 2) || (pdimm[1].n_ranks < 2)) {
popts->ba_intlv_ctl = 0;
printf("Not enough bank(CS) for CS0+CS1 and "
"CS2+CS3 on controller %d, "
@@ -341,6 +341,9 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
}
}
+ if (pdimm[0].n_ranks == 4)
+ popts->quad_rank_present = 1;
+
fsl_ddr_board_options(popts, pdimm, ctrl_num);
return 0;