powerpc, 5xx: remove support for 5xx

There was for long time no activity in the 5xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 5xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

12 files changed, 0 insertions, 1956 deletions

diff --git a/arch/powerpc/cpu/mpc5xx/Kconfig b/arch/powerpc/cpu/mpc5xx/Kconfig
deleted file mode 100644
index d81bfd2a50..0000000000
--- a/arch/powerpc/cpu/mpc5xx/Kconfig
+++ /dev/null
@@ -1,18 +0,0 @@
-menu "mpc5xx CPU"
-	depends on 5xx
-
-config SYS_CPU
-	default "mpc5xx"
-
-choice
-	prompt "Target select"
-	optional
-
-config TARGET_PATI
-	bool "Support PATI"
-
-endchoice
-
-source "board/mpl/pati/Kconfig"
-
-endmenu
diff --git a/arch/powerpc/cpu/mpc5xx/Makefile b/arch/powerpc/cpu/mpc5xx/Makefile
deleted file mode 100644
index 7b8826a643..0000000000
--- a/arch/powerpc/cpu/mpc5xx/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2003
-# Martin Winistoerfer, martinwinistoerfer@gmx.ch.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-#
-# File:			arch/powerpc/cpu/mpc5xx/Makefile
-#
-# Discription:		Makefile to build mpc5xx cpu configuration.
-#			Will include top config.mk which itselfs
-#			uses the definitions made in arch/powerpc/cpu/mpc5xx/config.mk
-#
-
-extra-y	= start.o
-obj-y	= serial.o cpu.o cpu_init.o interrupts.o traps.o speed.o spi.o
diff --git a/arch/powerpc/cpu/mpc5xx/config.mk b/arch/powerpc/cpu/mpc5xx/config.mk
deleted file mode 100644
index dd2ec376c9..0000000000
--- a/arch/powerpc/cpu/mpc5xx/config.mk
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003
-# Martin Winistoerfer, martinwinistoerfer@gmx.ch.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -mpowerpc -msoft-float
diff --git a/arch/powerpc/cpu/mpc5xx/cpu.c b/arch/powerpc/cpu/mpc5xx/cpu.c
deleted file mode 100644
index cfcf633369..0000000000
--- a/arch/powerpc/cpu/mpc5xx/cpu.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * (C) Copyright 2003
- * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * File:		cpu.c
- *
- * Discription:		Some cpu specific function for watchdog,
- *                      cpu version test, clock setting ...
- *
- */
-
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <mpc5xx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if (defined(CONFIG_MPC555))
-#  define	ID_STR	"MPC555/556"
-
-/*
- * Check version of cpu with Processor Version Register (PVR)
- */
-static int check_cpu_version (long clock, uint pvr, uint immr)
-{
-    char buf[32];
-	/* The highest 16 bits should be 0x0002 for a MPC555/556 */
-	if ((pvr >> 16) == 0x0002) {
-		printf (" " ID_STR " Version %x", (pvr >> 16));
-		printf (" at %s MHz:", strmhz (buf, clock));
-	} else {
-		printf ("Not supported cpu version");
-		return -1;
-	}
-	return 0;
-}
-#endif /* CONFIG_MPC555 */
-
-
-/*
- * Check version of mpc5xx
- */
-int checkcpu (void)
-{
-	ulong clock = gd->cpu_clk;
-	uint immr = get_immr (0);	/* Return full IMMR contents */
-	uint pvr = get_pvr ();		/* Retrieve PVR register */
-
-	puts ("CPU:   ");
-
-	return check_cpu_version (clock, pvr, immr);
-}
-
-/*
- * Called by macro WATCHDOG_RESET
- */
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset (void)
-{
-	int re_enable = disable_interrupts ();
-
-	reset_5xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
-	if (re_enable)
-		enable_interrupts ();
-}
-
-/*
- * Will clear software reset
- */
-void reset_5xx_watchdog (volatile immap_t * immr)
-{
-	/* Use the MPC5xx Internal Watchdog */
-	immr->im_siu_conf.sc_swsr = 0x556c;	/* Prevent SW time-out */
-	immr->im_siu_conf.sc_swsr = 0xaa39;
-}
-
-#endif /* CONFIG_WATCHDOG */
-
-
-/*
- * Get timebase clock frequency
- */
-unsigned long get_tbclk (void)
-{
-	volatile immap_t *immr = (volatile immap_t *) CONFIG_SYS_IMMR;
-	ulong oscclk, factor;
-
-	if (immr->im_clkrst.car_sccr & SCCR_TBS) {
-		return (gd->cpu_clk / 16);
-	}
-
-	factor = (((CONFIG_SYS_PLPRCR) & PLPRCR_MF_MSK) >> PLPRCR_MF_SHIFT) + 1;
-
-	oscclk = gd->cpu_clk / factor;
-
-	if ((immr->im_clkrst.car_sccr & SCCR_RTSEL) == 0 || factor > 2) {
-		return (oscclk / 4);
-	}
-	return (oscclk / 16);
-}
-
-void dcache_enable (void)
-{
-	return;
-}
-
-void dcache_disable (void)
-{
-	return;
-}
-
-int dcache_status (void)
-{
-	return 0;	/* always off */
-}
-
-/*
- * Reset board
- */
-int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
-#if defined(CONFIG_PATI)
-	volatile ulong *addr = (ulong *) CONFIG_SYS_RESET_ADDRESS;
-	*addr = 1;
-#else
-	ulong addr;
-
-	/* Interrupts off, enable reset */
-	__asm__ volatile	("  mtspr	81, %r0		\n\t"
-				 "  mfmsr	%r3		\n\t"
-				 "  rlwinm	%r31,%r3,0,25,23\n\t"
-				 "  mtmsr	%r31		\n\t");
-	/*
-	 * Trying to execute the next instruction at a non-existing address
-	 * should cause a machine check, resulting in reset
-	 */
-#ifdef CONFIG_SYS_RESET_ADDRESS
-	addr = CONFIG_SYS_RESET_ADDRESS;
-#else
-	/*
-	 * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE         * - sizeof (ulong) is usually a valid address. Better pick an address
-	 * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
-	 * "(ulong)-1" used to be a good choice for many systems...
-	 */
-	addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
-#endif
-	((void (*) (void)) addr) ();
-#endif  /* #if defined(CONFIG_PATI) */
-	return 1;
-}
diff --git a/arch/powerpc/cpu/mpc5xx/cpu_init.c b/arch/powerpc/cpu/mpc5xx/cpu_init.c
deleted file mode 100644
index 5bae39f8c0..0000000000
--- a/arch/powerpc/cpu/mpc5xx/cpu_init.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * (C) Copyright 2003  Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * File:		cpu_init.c
- *
- * Discription:		Contains initialisation functions to setup
- *			the cpu properly
- *
- */
-
-#include <common.h>
-#include <mpc5xx.h>
-#include <watchdog.h>
-
-/*
- * Setup essential cpu registers to run
- */
-void cpu_init_f (volatile immap_t * immr)
-{
-	volatile memctl5xx_t *memctl = &immr->im_memctl;
-	ulong reg;
-
-	/* SYPCR - contains watchdog control. This will enable watchdog */
-	/* if CONFIG_WATCHDOG is set */
-	immr->im_siu_conf.sc_sypcr = CONFIG_SYS_SYPCR;
-
-#if defined(CONFIG_WATCHDOG)
-	reset_5xx_watchdog (immr);
-#endif
-
-	/* SIUMCR - contains debug pin configuration */
-	immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR;
-
-	/* Initialize timebase. Unlock TBSCRK */
-	immr->im_sitk.sitk_tbscrk = KAPWR_KEY;
-	immr->im_sit.sit_tbscr = CONFIG_SYS_TBSCR;
-
-	/* Full IMB bus speed */
-	immr->im_uimb.uimb_umcr = CONFIG_SYS_UMCR;
-
-	/* Time base and decrementer will be enables (TBE) */
-	/* in timer_init() in time.c called from board_init_f(). */
-
-	/* Initialize the PIT. Unlock PISCRK */
-	immr->im_sitk.sitk_piscrk = KAPWR_KEY;
-	immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
-
-#if !defined(CONFIG_PATI)
-	/* PATI sest PLL in start.S */
-	/* PLL (CPU clock) settings */
-	immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
-
-	/* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to
-	 * set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr,
-	 * otherwise OR in CONFIG_SYS_PLPRCR so we do not change the currentMF
-	 * field value.
-	 */
-#if ((CONFIG_SYS_PLPRCR & PLPRCR_MF_MSK) != 0)
-	reg = CONFIG_SYS_PLPRCR;			/* reset control bits   */
-#else
-	reg = immr->im_clkrst.car_plprcr;
-	reg &= PLPRCR_MF_MSK;			/* isolate MF field */
-	reg |= CONFIG_SYS_PLPRCR;			/* reset control bits   */
-#endif
-	immr->im_clkrst.car_plprcr = reg;
-
-#endif /* !defined(CONFIG_PATI) */
-
-	/* System integration timers. CONFIG_SYS_MASK has EBDF configuration */
-	immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
-	reg = immr->im_clkrst.car_sccr;
-	reg &= SCCR_MASK;
-	reg |= CONFIG_SYS_SCCR;
-	immr->im_clkrst.car_sccr = reg;
-
-	/* Memory Controller */
-	memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
-	memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
-
-#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
-	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
-	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
-	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
-	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
-	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
-	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-#endif
-
-}
-
-/*
- * Initialize higher level parts of cpu
- */
-int cpu_init_r (void)
-{
-	/* Nothing to do at the moment */
-	return (0);
-}
diff --git a/arch/powerpc/cpu/mpc5xx/interrupts.c b/arch/powerpc/cpu/mpc5xx/interrupts.c
deleted file mode 100644
index 35dddf5984..0000000000
--- a/arch/powerpc/cpu/mpc5xx/interrupts.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * (C) Copyright 2000-2002	Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * (C) Copyright 2003		Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * File:		interrupt.c
- *
- * Discription:		Contains interrupt routines needed by U-Boot
- *
- */
-
-#include <common.h>
-#include <command.h>
-#include <mpc5xx.h>
-#include <asm/processor.h>
-
-#if defined(CONFIG_PATI)
-/* PATI uses IRQs for PCI doorbell */
-#undef NR_IRQS
-#define NR_IRQS 16
-#endif
-
-struct interrupt_action {
-	interrupt_handler_t *handler;
-	void *arg;
-	int count;
-};
-
-static struct interrupt_action irq_vecs[NR_IRQS];
-
-/*
- * Initialise interrupts
- */
-
-int interrupt_init_cpu (ulong *decrementer_count)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	int vec;
-
-	/* Decrementer used here for status led */
-	*decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
-
-	/* Disable all interrupts */
-	immr->im_siu_conf.sc_simask = 0;
-	for (vec=0; vec<NR_IRQS; vec++) {
-		irq_vecs[vec].handler = NULL;
-		irq_vecs[vec].arg = NULL;
-		irq_vecs[vec].count = 0;
-	}
-
-	return (0);
-}
-
-/*
- * Handle external interrupts
- */
-void external_interrupt (struct pt_regs *regs)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	int irq;
-	ulong simask, newmask;
-	ulong vec, v_bit;
-
-	/*
-	 * read the SIVEC register and shift the bits down
-	 * to get the irq number
-	 */
-	vec = immr->im_siu_conf.sc_sivec;
-	irq = vec >> 26;
-	v_bit = 0x80000000UL >> irq;
-
-	/*
-	 * Read Interrupt Mask Register and Mask Interrupts
-	 */
-	simask = immr->im_siu_conf.sc_simask;
-	newmask = simask & (~(0xFFFF0000 >> irq));
-	immr->im_siu_conf.sc_simask = newmask;
-
-	if (!(irq & 0x1)) {		/* External Interrupt ?     */
-		ulong siel;
-
-		/*
-		 * Read Interrupt Edge/Level Register
-		 */
-		siel = immr->im_siu_conf.sc_siel;
-
-		if (siel & v_bit) {	/* edge triggered interrupt ?   */
-			/*
-			 * Rewrite SIPEND Register to clear interrupt
-			 */
-			immr->im_siu_conf.sc_sipend = v_bit;
-		}
-	}
-
-	if (irq_vecs[irq].handler != NULL) {
-		irq_vecs[irq].handler (irq_vecs[irq].arg);
-	} else {
-		printf ("\nBogus External Interrupt IRQ %d Vector %ld\n",
-				irq, vec);
-		/* turn off the bogus interrupt to avoid it from now */
-		simask &= ~v_bit;
-	}
-	/*
-	 * Re-Enable old Interrupt Mask
-	 */
-	immr->im_siu_conf.sc_simask = simask;
-}
-
-/*
- * Install and free an interrupt handler
- */
-void irq_install_handler (int vec, interrupt_handler_t * handler,
-						  void *arg)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	/* SIU interrupt */
-	if (irq_vecs[vec].handler != NULL) {
-		printf ("SIU interrupt %d 0x%x\n",
-			vec,
-			(uint) handler);
-	}
-	irq_vecs[vec].handler = handler;
-	irq_vecs[vec].arg = arg;
-	immr->im_siu_conf.sc_simask |= 1 << (31 - vec);
-#if 0
-	printf ("Install SIU interrupt for vector %d ==> %p\n",
-		vec, handler);
-#endif
-}
-
-void irq_free_handler (int vec)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	/* SIU interrupt */
-#if 0
-	printf ("Free CPM interrupt for vector %d\n",
-		vec);
-#endif
-	immr->im_siu_conf.sc_simask &= ~(1 << (31 - vec));
-	irq_vecs[vec].handler = NULL;
-	irq_vecs[vec].arg = NULL;
-}
-
-/*
- *  Timer interrupt - gets called when  bit 0 of DEC changes from
- *  0. Decrementer is enabled with bit TBE in TBSCR.
- */
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-#if 0
-	printf ("*** Timer Interrupt *** ");
-#endif
-	/* Reset Timer Status Bit and Timers Interrupt Status */
-	immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
-	__asm__ ("nop");
-	immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS | PLPRCR_TMIST;
-
-	return;
-}
-
-#if defined(CONFIG_CMD_IRQ)
-/*******************************************************************************
- *
- * irqinfo - print information about IRQs
- *
- */
-int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	int vec;
-
-	printf ("\nInterrupt-Information:\n");
-	printf ("Nr  Routine   Arg       Count\n");
-
-	for (vec=0; vec<NR_IRQS; vec++) {
-		if (irq_vecs[vec].handler != NULL) {
-			printf ("%02d  %08lx  %08lx  %d\n",
-				vec,
-				(ulong)irq_vecs[vec].handler,
-				(ulong)irq_vecs[vec].arg,
-				irq_vecs[vec].count);
-		}
-	}
-	return 0;
-}
-
-
-#endif
diff --git a/arch/powerpc/cpu/mpc5xx/serial.c b/arch/powerpc/cpu/mpc5xx/serial.c
deleted file mode 100644
index a2a8d94e06..0000000000
--- a/arch/powerpc/cpu/mpc5xx/serial.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * (C) Copyright 2003
- * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * File:		serial.c
- *
- * Discription:		Serial interface driver for SCI1 and SCI2.
- *			Since this code will be called from ROM use
- *			only non-static local variables.
- *
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <mpc5xx.h>
-#include <serial.h>
-#include <linux/compiler.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Local functions
- */
-
-static int ready_to_send(void)
-{
-	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	volatile short status;
-
-	do {
-#if defined(CONFIG_5xx_CONS_SCI1)
-		status = immr->im_qsmcm.qsmcm_sc1sr;
-#else
-		status = immr->im_qsmcm.qsmcm_sc2sr;
-#endif
-
-#if defined(CONFIG_WATCHDOG)
-		reset_5xx_watchdog (immr);
-#endif
-	} while ((status & SCI_TDRE) == 0);
-	return 1;
-
-}
-
-/*
- * Minimal global serial functions needed to use one of the SCI modules.
- */
-
-static int mpc5xx_serial_init(void)
-{
-	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-
-	serial_setbrg();
-
-#if defined(CONFIG_5xx_CONS_SCI1)
-	/* 10-Bit, 1 start bit, 8 data bit, no parity, 1 stop bit */
-	immr->im_qsmcm.qsmcm_scc1r1 = SCI_M_10;
-	immr->im_qsmcm.qsmcm_scc1r1 = SCI_TE | SCI_RE;
-#else
-	immr->im_qsmcm.qsmcm_scc2r1 = SCI_M_10;
-	immr->im_qsmcm.qsmcm_scc2r1 = SCI_TE | SCI_RE;
-#endif
-	return 0;
-}
-
-static void mpc5xx_serial_putc(const char c)
-{
-	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-
-	/* Test for completition */
-	if(ready_to_send()) {
-#if defined(CONFIG_5xx_CONS_SCI1)
-		immr->im_qsmcm.qsmcm_sc1dr = (short)c;
-#else
-		immr->im_qsmcm.qsmcm_sc2dr = (short)c;
-#endif
-		if(c == '\n') {
-			if(ready_to_send());
-#if defined(CONFIG_5xx_CONS_SCI1)
-			immr->im_qsmcm.qsmcm_sc1dr = (short)'\r';
-#else
-			immr->im_qsmcm.qsmcm_sc2dr = (short)'\r';
-#endif
-		}
-	}
-}
-
-static int mpc5xx_serial_getc(void)
-{
-	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	volatile short status;
-	unsigned char tmp;
-
-	/* New data ? */
-	do {
-#if defined(CONFIG_5xx_CONS_SCI1)
-		status = immr->im_qsmcm.qsmcm_sc1sr;
-#else
-		status = immr->im_qsmcm.qsmcm_sc2sr;
-#endif
-
-#if defined(CONFIG_WATCHDOG)
-		reset_5xx_watchdog (immr);
-#endif
-	} while ((status & SCI_RDRF) == 0);
-
-	/* Read data */
-#if defined(CONFIG_5xx_CONS_SCI1)
-	tmp = (unsigned char)(immr->im_qsmcm.qsmcm_sc1dr & SCI_SCXDR_MK);
-#else
-	tmp = (unsigned char)( immr->im_qsmcm.qsmcm_sc2dr & SCI_SCXDR_MK);
-#endif
-	return	tmp;
-}
-
-static int mpc5xx_serial_tstc(void)
-{
-	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	short status;
-
-	/* New data character ? */
-#if defined(CONFIG_5xx_CONS_SCI1)
-	status = immr->im_qsmcm.qsmcm_sc1sr;
-#else
-	status = immr->im_qsmcm.qsmcm_sc2sr;
-#endif
-	return (status & SCI_RDRF);
-}
-
-static void mpc5xx_serial_setbrg(void)
-{
-	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	short scxbr;
-
-	/* Set baudrate */
-	scxbr = (gd->cpu_clk / (32 * gd->baudrate));
-#if defined(CONFIG_5xx_CONS_SCI1)
-	immr->im_qsmcm.qsmcm_scc1r0 = (scxbr & SCI_SCXBR_MK);
-#else
-	immr->im_qsmcm.qsmcm_scc2r0 = (scxbr & SCI_SCXBR_MK);
-#endif
-}
-
-static struct serial_device mpc5xx_serial_drv = {
-	.name	= "mpc5xx_serial",
-	.start	= mpc5xx_serial_init,
-	.stop	= NULL,
-	.setbrg	= mpc5xx_serial_setbrg,
-	.putc	= mpc5xx_serial_putc,
-	.puts	= default_serial_puts,
-	.getc	= mpc5xx_serial_getc,
-	.tstc	= mpc5xx_serial_tstc,
-};
-
-void mpc5xx_serial_initialize(void)
-{
-	serial_register(&mpc5xx_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
-	return &mpc5xx_serial_drv;
-}
diff --git a/arch/powerpc/cpu/mpc5xx/speed.c b/arch/powerpc/cpu/mpc5xx/speed.c
deleted file mode 100644
index 24b9026f56..0000000000
--- a/arch/powerpc/cpu/mpc5xx/speed.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * (C) Copyright 2003
- * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * File:		speed.c
- *
- * Discription:		Provides cpu speed calculation
- *
- */
-
-#include <common.h>
-#include <mpc5xx.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Get cpu and bus clock
- */
-int get_clocks (void)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-#ifndef	CONFIG_5xx_GCLK_FREQ
-	uint divf = (immr->im_clkrst.car_plprcr & PLPRCR_DIVF_MSK);
-	uint mf = ((immr->im_clkrst.car_plprcr & PLPRCR_MF_MSK) >> PLPRCR_MF_SHIFT);
-	ulong vcoout;
-
-	vcoout = (CONFIG_SYS_OSC_CLK / (divf + 1)) * (mf + 1) * 2;
-	if(immr->im_clkrst.car_plprcr & PLPRCR_CSRC_MSK) {
-		gd->cpu_clk = vcoout / (2^(((immr->im_clkrst.car_sccr & SCCR_DFNL_MSK) >> SCCR_DFNL_SHIFT) + 1));
-	} else {
-		gd->cpu_clk = vcoout / (2^(immr->im_clkrst.car_sccr & SCCR_DFNH_MSK));
-	}
-
-#else /* CONFIG_5xx_GCLK_FREQ */
-	gd->bus_clk = CONFIG_5xx_GCLK_FREQ;
-#endif /* CONFIG_5xx_GCLK_FREQ */
-
-	if ((immr->im_clkrst.car_sccr & SCCR_EBDF11) == 0) {
-		/* No Bus Divider active */
-		gd->bus_clk = gd->cpu_clk;
-	} else {
-		/* CLKOUT is GCLK / 2 */
-		gd->bus_clk = gd->cpu_clk / 2;
-	}
-	return (0);
-}
diff --git a/arch/powerpc/cpu/mpc5xx/spi.c b/arch/powerpc/cpu/mpc5xx/spi.c
deleted file mode 100644
index ef8b55f5f0..0000000000
--- a/arch/powerpc/cpu/mpc5xx/spi.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * Copyright (c) 2001 Navin Boppuri / Prashant Patel
- *	<nboppuri@trinetcommunication.com>,
- *	<pmpatel@trinetcommunication.com>
- * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
- * Copyright (c) 2001 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * MPC5xx CPM SPI interface.
- *
- * Parts of this code are probably not portable and/or specific to
- * the board which I used for the tests. Please send fixes/complaints
- * to wd@denx.de
- *
- * Ported to MPC5xx
- * Copyright (c) 2003 Denis Peter, MPL AG Switzerland, d.petr@mpl.ch.
- */
-
-#include <common.h>
-#include <mpc5xx.h>
-#include <asm/5xx_immap.h>
-#include <linux/ctype.h>
-#include <malloc.h>
-#include <post.h>
-#include <net.h>
-
-#if defined(CONFIG_SPI)
-
-#undef	DEBUG
-
-#define SPI_EEPROM_WREN		0x06
-#define SPI_EEPROM_RDSR		0x05
-#define SPI_EEPROM_READ		0x03
-#define SPI_EEPROM_WRITE	0x02
-
-
-#ifdef	DEBUG
-
-#define	DPRINT(a)	printf a;
-/* -----------------------------------------------
- * Helper functions to peek into tx and rx buffers
- * ----------------------------------------------- */
-static const char * const hex_digit = "0123456789ABCDEF";
-
-static char quickhex (int i)
-{
-	return hex_digit[i];
-}
-
-static void memdump (void *pv, int num)
-{
-	int i;
-	unsigned char *pc = (unsigned char *) pv;
-
-	for (i = 0; i < num; i++)
-		printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
-	printf ("\t");
-	for (i = 0; i < num; i++)
-		printf ("%c", isprint (pc[i]) ? pc[i] : '.');
-	printf ("\n");
-}
-#else	/* !DEBUG */
-
-#define	DPRINT(a)
-
-#endif	/* DEBUG */
-
-/* -------------------
- * Function prototypes
- * ------------------- */
-void spi_init (void);
-
-ssize_t spi_read (uchar *, int, uchar *, int);
-ssize_t spi_write (uchar *, int, uchar *, int);
-ssize_t spi_xfer (size_t);
-
-
-/* **************************************************************************
- *
- *  Function:    spi_init_f
- *
- *  Description: Init SPI-Controller (ROM part)
- *
- *  return:      ---
- *
- * *********************************************************************** */
-
-void spi_init_f (void)
-{
-	int i;
-
-	volatile immap_t *immr;
-	volatile qsmcm5xx_t *qsmcm;
-
-	immr = (immap_t *)  CONFIG_SYS_IMMR;
-	qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
-
-	qsmcm->qsmcm_qsmcr = 0; /* all accesses enabled */
-	qsmcm->qsmcm_qspi_il = 0; /* lowest IRQ */
-
-	/* --------------------------------------------
-	 * GPIO or per. Function
-	 * PQSPAR[00] = 0 reserved
-	 * PQSPAR[01] = 1 [0x4000] -> PERI: (SPICS3)
-	 * PQSPAR[02] = 0 [0x0000] -> GPIO
-	 * PQSPAR[03] = 0 [0x0000] -> GPIO
-	 * PQSPAR[04] = 1 [0x0800] -> PERI: (SPICS0)
-	 * PQSPAR[05] = 0 reseved
-	 * PQSPAR[06] = 1 [0x0200] -> PERI: (SPIMOSI)
-	 * PQSPAR[07] = 1 [0x0100] -> PERI: (SPIMISO)
-	 * -------------------------------------------- */
-	qsmcm->qsmcm_pqspar =  0x3 | (CONFIG_SYS_SPI_CS_USED << 3);
-
-	 /* --------------------------------------------
-	 * DDRQS[00] = 0 reserved
-	 * DDRQS[01] = 1 [0x0040] -> SPICS3 Output
-	 * DDRQS[02] = 0 [0x0000] -> GPIO Output
-	 * DDRQS[03] = 0 [0x0000] -> GPIO Output
-	 * DDRQS[04] = 1 [0x0008] -> SPICS0 Output
-	 * DDRQS[05] = 1 [0x0004] -> SPICLK Output
-	 * DDRQS[06] = 1 [0x0002] -> SPIMOSI Output
-	 * DDRQS[07] = 0 [0x0001] -> SPIMISO Input
-	 * -------------------------------------------- */
-	qsmcm->qsmcm_ddrqs = 0x7E;
-	 /* --------------------------------------------
-	 * Base state for used SPI CS pins, if base = 0 active must be 1
-	 * PORTQS[00] = 0 reserved
-	 * PORTQS[01] = 0 reserved
-	 * PORTQS[02] = 0 reserved
-	 * PORTQS[03] = 0 reserved
-	 * PORTQS[04] = 0 [0x0000] RxD2
-	 * PORTQS[05] = 1 [0x0400] TxD2
-	 * PORTQS[06] = 0 [0x0000] RxD1
-	 * PORTQS[07] = 1 [0x0100] TxD1
-	 * PORTQS[08] = 0 reserved
-	 * PORTQS[09] = 0 [0x0000] -> SPICS3 Base Output
-	 * PORTQS[10] = 0 [0x0000] -> SPICS2 Base Output
-	 * PORTQS[11] = 0 [0x0000] -> SPICS1 Base Output
-	 * PORTQS[12] = 0 [0x0000] -> SPICS0 Base Output
-	 * PORTQS[13] = 0 [0x0004] -> SPICLK Output
-	 * PORTQS[14] = 0 [0x0002] -> SPIMOSI Output
-	 * PORTQS[15] = 0 [0x0001] -> SPIMISO Input
-	 * -------------------------------------------- */
-	qsmcm->qsmcm_portqs |= (CONFIG_SYS_SPI_CS_BASE << 3);
-	/* --------------------------------------------
-	 * Controll Register 0
-	 * SPCR0[00] = 1 (0x8000) Master
-	 * SPCR0[01] = 0 (0x0000) Wired-Or
-	 * SPCR0[2..5] = (0x2000) Bits per transfer (default 8)
-	 * SPCR0[06] = 0 (0x0000) Normal polarity
-	 * SPCR0[07] = 0 (0x0000) Normal Clock Phase
-	 * SPCR0[08..15] = 14 1.4MHz
-	 */
-	qsmcm->qsmcm_spcr0=0xA00E;
-	/* --------------------------------------------
-	 * Controll Register 1
-	 * SPCR1[00] = 0 (0x0000) QSPI enabled
-	 * SPCR1[1..7] =  (0x7F00) Delay before Transfer
-	 * SPCR1[8..15] = (0x0000) Delay After transfer (204.8usec@40MHz)
-	 */
-	qsmcm->qsmcm_spcr1=0x7F00;
-	/* --------------------------------------------
-	 * Controll Register 2
-	 * SPCR2[00] = 0 (0x0000) SPI IRQs Disabeld
-	 * SPCR2[01] = 0 (0x0000) No Wrap around
-	 * SPCR2[02] = 0 (0x0000) Wrap to 0
-	 * SPCR2[3..7] = (0x0000) End Queue pointer = 0
-	 * SPCR2[8..10] = 0 (0x0000) reserved
-	 * SPCR2[11..15] = 0 (0x0000) NewQueue Address = 0
-	 */
-	qsmcm->qsmcm_spcr2=0x0000;
-	/* --------------------------------------------
-	 * Controll Register 3
-	 * SPCR3[00..04] = 0 (0x0000) reserved
-	 * SPCR3[05] = 0 (0x0000) Feedback disabled
-	 * SPCR3[06] = 0 (0x0000) IRQ on HALTA & MODF disabled
-	 * SPCR3[07] = 0 (0x0000) Not halted
-	 */
-	qsmcm->qsmcm_spcr3=0x00;
-	/* --------------------------------------------
-	 * SPSR (Controll Register 3) Read only/ reset Flags 08,09,10
-	 * SPCR3[08] = 1 (0x80) QSPI finished
-	 * SPCR3[09] = 1 (0x40) Mode Fault Flag
-	 * SPCR3[10] = 1 (0x20) HALTA
-	 * SPCR3[11..15] = 0 (0x0000) Last executed command
-	 */
-	qsmcm->qsmcm_spsr=0xE0;
-	/*-------------------------------------------
-	 * Setup RAM
-	 */
-	for(i=0;i<32;i++) {
-		 qsmcm->qsmcm_recram[i]=0x0000;
-		 qsmcm->qsmcm_tranram[i]=0x0000;
-		 qsmcm->qsmcm_comdram[i]=0x00;
-	}
-	return;
-}
-
-/* **************************************************************************
- *
- *  Function:    spi_init_r
- *  Dummy, all initializations have been done in spi_init_r
- * *********************************************************************** */
-void spi_init_r (void)
-{
-	return;
-
-}
-
-/****************************************************************************
- *  Function:    spi_write
- **************************************************************************** */
-ssize_t short_spi_write (uchar *addr, int alen, uchar *buffer, int len)
-{
-	int i,dlen;
-	volatile immap_t *immr;
-	volatile qsmcm5xx_t *qsmcm;
-
-	immr = (immap_t *)  CONFIG_SYS_IMMR;
-	qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
-	for(i=0;i<32;i++) {
-		 qsmcm->qsmcm_recram[i]=0x0000;
-		 qsmcm->qsmcm_tranram[i]=0x0000;
-		 qsmcm->qsmcm_comdram[i]=0x00;
-	}
-	qsmcm->qsmcm_tranram[0] =  SPI_EEPROM_WREN; /* write enable */
-	spi_xfer(1);
-	i=0;
-	qsmcm->qsmcm_tranram[i++] =  SPI_EEPROM_WRITE; /* WRITE memory array */
-	qsmcm->qsmcm_tranram[i++] =  addr[0];
-	qsmcm->qsmcm_tranram[i++] =  addr[1];
-
-	for(dlen=0;dlen<len;dlen++) {
-		qsmcm->qsmcm_tranram[i+dlen] = buffer[dlen]; /* WRITE memory array */
-	}
-	/* transmit it */
-	spi_xfer(i+dlen);
-	/* ignore received data	*/
-	for (i = 0; i < 1000; i++) {
-		qsmcm->qsmcm_tranram[0] =  SPI_EEPROM_RDSR; /* read status */
-		qsmcm->qsmcm_tranram[1] = 0;
-		spi_xfer(2);
-		if (!(qsmcm->qsmcm_recram[1] & 1)) {
-			break;
-		}
-		udelay(1000);
-	}
-	if (i >= 1000) {
-		printf ("*** spi_write: Time out while writing!\n");
-	}
-	return len;
-}
-
-#define TRANSFER_LEN 16
-
-ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
-{
-	int index,i,newlen;
-	uchar newaddr[2];
-	int curraddr;
-
-	curraddr=(addr[alen-2]<<8)+addr[alen-1];
-	i=len;
-	index=0;
-	do {
-		newaddr[1]=(curraddr & 0xff);
-		newaddr[0]=((curraddr>>8) & 0xff);
-		if(i>TRANSFER_LEN) {
-			newlen=TRANSFER_LEN;
-			i-=TRANSFER_LEN;
-		}
-		else {
-			newlen=i;
-			i=0;
-		}
-		short_spi_write (newaddr, 2, &buffer[index], newlen);
-		index+=newlen;
-		curraddr+=newlen;
-	}while(i);
-	return (len);
-}
-
-/****************************************************************************
- *  Function:    spi_read
- **************************************************************************** */
-ssize_t short_spi_read (uchar *addr, int alen, uchar *buffer, int len)
-{
-	int i;
-	volatile immap_t *immr;
-	volatile qsmcm5xx_t *qsmcm;
-
-	immr = (immap_t *)  CONFIG_SYS_IMMR;
-	qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
-
-	for(i=0;i<32;i++) {
-		 qsmcm->qsmcm_recram[i]=0x0000;
-		 qsmcm->qsmcm_tranram[i]=0x0000;
-		 qsmcm->qsmcm_comdram[i]=0x00;
-	}
-	i=0;
-	qsmcm->qsmcm_tranram[i++] = (SPI_EEPROM_READ); /* READ memory array */
-	qsmcm->qsmcm_tranram[i++] = addr[0] & 0xff;
-	qsmcm->qsmcm_tranram[i++] = addr[1] & 0xff;
-	spi_xfer(3 + len);
-	for(i=0;i<len;i++) {
-		*buffer++=(char)qsmcm->qsmcm_recram[i+3];
-	}
-	return len;
-}
-
-ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
-{
-	int index,i,newlen;
-	uchar newaddr[2];
-	int curraddr;
-
-	curraddr=(addr[alen-2]<<8)+addr[alen-1];
-	i=len;
-	index=0;
-	do {
-		newaddr[1]=(curraddr & 0xff);
-		newaddr[0]=((curraddr>>8) & 0xff);
-		if(i>TRANSFER_LEN) {
-			newlen=TRANSFER_LEN;
-			i-=TRANSFER_LEN;
-		}
-		else {
-			newlen=i;
-			i=0;
-		}
-		short_spi_read (newaddr, 2, &buffer[index], newlen);
-		index+=newlen;
-		curraddr+=newlen;
-	}while(i);
-	return (len);
-}
-
-/****************************************************************************
- *  Function:    spi_xfer
- **************************************************************************** */
-ssize_t spi_xfer (size_t count)
-{
-	volatile immap_t *immr;
-	volatile qsmcm5xx_t *qsmcm;
-	int i;
-	int tm;
-	ushort status;
-	immr = (immap_t *)  CONFIG_SYS_IMMR;
-	qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
-	DPRINT (("*** spi_xfer entered count %d***\n",count));
-
-	/* Set CS for device */
-	for(i=0;i<(count-1);i++)
-		qsmcm->qsmcm_comdram[i] = 0x80 | CONFIG_SYS_SPI_CS_ACT;  /* CS3 is connected to the SPI EEPROM */
-
-	qsmcm->qsmcm_comdram[i] = CONFIG_SYS_SPI_CS_ACT; /* CS3 is connected to the SPI EEPROM */
-	qsmcm->qsmcm_spcr2=((count-1)&0x1F)<<8;
-
-	DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n", count));
-
-	qsmcm->qsmcm_spsr=0xE0; /* clear all flags */
-
-	/* start spi transfer */
-	DPRINT (("*** spi_xfer: Performing transfer ...\n"));
-	qsmcm->qsmcm_spcr1 |= 0x8000;		/* Start transmit */
-
-	/* --------------------------------
-	 * Wait for SPI transmit to get out
-	 * or time out (1 second = 1000 ms)
-	 * -------------------------------- */
-	for (tm=0; tm<1000; ++tm) {
-		status=qsmcm->qsmcm_spcr1;
-		if((status & 0x8000)==0)
-			break;
-		udelay (1000);
-	}
-	if (tm >= 1000) {
-		printf ("*** spi_xfer: Time out while xferring to/from SPI!\n");
-	}
-#ifdef	DEBUG
-	printf ("\nspi_xfer: txbuf after xfer\n");
-	memdump ((void *) qsmcm->qsmcm_tranram, 32);	/* dump of txbuf before transmit */
-	printf ("spi_xfer: rxbuf after xfer\n");
-	memdump ((void *) qsmcm->qsmcm_recram, 32);	/* dump of rxbuf after transmit */
-	printf ("\nspi_xfer: commbuf after xfer\n");
-	memdump ((void *) qsmcm->qsmcm_comdram, 32);	/* dump of txbuf before transmit */
-	printf ("\n");
-#endif
-
-	return count;
-}
-
-#endif	/* CONFIG_SPI  */
diff --git a/arch/powerpc/cpu/mpc5xx/start.S b/arch/powerpc/cpu/mpc5xx/start.S
deleted file mode 100644
index 6b196de355..0000000000
--- a/arch/powerpc/cpu/mpc5xx/start.S
+++ /dev/null
@@ -1,541 +0,0 @@
-/*
- *  Copyright (C) 1998	Dan Malek <dmalek@jlc.net>
- *  Copyright (C) 1999	Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- *  Copyright (C) 2000, 2001, 2002 Wolfgang Denk <wd@denx.de>
- *  Copyright (C) 2003  Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * File:		start.S
- *
- * Discription:		startup code
- *
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <mpc5xx.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/processor.h>
-#include <asm/u-boot.h>
-
-/* We don't have a MMU.
-*/
-#undef	MSR_KERNEL
-#define MSR_KERNEL ( MSR_ME | MSR_RI )		/* Machine Check and Recoverable Interr. */
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
-	START_GOT
-	GOT_ENTRY(_GOT2_TABLE_)
-	GOT_ENTRY(_FIXUP_TABLE_)
-
-	GOT_ENTRY(_start)
-	GOT_ENTRY(_start_of_vectors)
-	GOT_ENTRY(_end_of_vectors)
-	GOT_ENTRY(transfer_to_handler)
-
-	GOT_ENTRY(__init_end)
-	GOT_ENTRY(__bss_end)
-	GOT_ENTRY(__bss_start)
-	END_GOT
-
-/*
- * r3 - 1st arg to board_init(): IMMP pointer
- * r4 - 2nd arg to board_init(): boot flag
- */
-	.text
-	.long	0x27051956			/* U-Boot Magic Number */
-	.globl	version_string
-version_string:
-	.ascii U_BOOT_VERSION_STRING, "\0"
-
-	. = EXC_OFF_SYS_RESET
-	.globl	_start
-_start:
-	mfspr	r3, 638
-	li	r4, CONFIG_SYS_ISB			/* Set ISB bit */
-	or	r3, r3, r4
-	mtspr	638, r3
-
-	/* Initialize machine status; enable machine check interrupt		*/
-	/*----------------------------------------------------------------------*/
-	li	r3, MSR_KERNEL			/* Set ME, RI flags */
-	mtmsr	r3
-	mtspr	SRR1, r3			/* Make SRR1 match MSR */
-
-	/* Initialize debug port registers					*/
-	/*----------------------------------------------------------------------*/
-	xor	r0, r0, r0			/* Clear R0 */
-	mtspr	LCTRL1, r0			/* Initialize debug port regs */
-	mtspr	LCTRL2, r0
-	mtspr	COUNTA, r0
-	mtspr	COUNTB, r0
-
-#if defined(CONFIG_PATI)
-	/* the external flash access on PATI fails if programming the PLL to 40MHz.
-	 * Copy the PLL programming code to the internal RAM and execute it
-	 *----------------------------------------------------------------------*/
-	lis	r3, CONFIG_SYS_MONITOR_BASE@h
-	ori	r3, r3, CONFIG_SYS_MONITOR_BASE@l
-	addi	r3, r3, pll_prog_code_start - _start + EXC_OFF_SYS_RESET
-
-	lis	r4, CONFIG_SYS_INIT_RAM_ADDR@h
-	ori	r4, r4, CONFIG_SYS_INIT_RAM_ADDR@l
-	mtlr	r4
-	addis	r5,0,0x0
-	ori	r5,r5,((pll_prog_code_end - pll_prog_code_start) >>2)
-	mtctr	r5
-	addi	r3, r3, -4
-	addi	r4, r4, -4
-0:
-	lwzu	r0,4(r3)
-	stwu	r0,4(r4)
-	bdnz	0b                /* copy loop */
-	blrl
-#endif
-
-	/*
-	 * Calculate absolute address in FLASH and jump there
-	 *----------------------------------------------------------------------*/
-
-	lis	r3, CONFIG_SYS_MONITOR_BASE@h
-	ori	r3, r3, CONFIG_SYS_MONITOR_BASE@l
-	addi	r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
-	mtlr	r3
-	blr
-
-in_flash:
-
-	/* Initialize some SPRs that are hard to access from C			*/
-	/*----------------------------------------------------------------------*/
-
-	lis     r3, CONFIG_SYS_IMMR@h			/* Pass IMMR as arg1 to C routine */
-	lis	r2, CONFIG_SYS_INIT_SP_ADDR@h
-	ori	r1, r2, CONFIG_SYS_INIT_SP_ADDR@l	/* Set up the stack in internal SRAM */
-	/* Note: R0 is still 0 here */
-	stwu	r0, -4(r1)			/* Clear final stack frame so that	*/
-	stwu	r0, -4(r1)			/* stack backtraces terminate cleanly	*/
-
-	/*
-	 * Disable serialized ifetch and show cycles
-	 * (i.e. set processor to normal mode) for maximum
-	 * performance.
-	 */
-
-	li	r2, 0x0007
-	mtspr	ICTRL, r2
-
-	/* Set up debug mode entry */
-
-	lis	r2, CONFIG_SYS_DER@h
-	ori	r2, r2, CONFIG_SYS_DER@l
-	mtspr	DER, r2
-
-	/* Let the C-code set up the rest					*/
-	/*									*/
-	/* Be careful to keep code relocatable !				*/
-	/*----------------------------------------------------------------------*/
-
-	GET_GOT			/* initialize GOT access			*/
-
-	/* r3: IMMR */
-	bl	cpu_init_f	/* run low-level CPU init code     (from Flash)	*/
-
-	bl	board_init_f	/* run 1st part of board init code (from Flash) */
-
-	/* NOTREACHED - board_init_f() does not return */
-
-
-	.globl	_start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
-	STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception.  "Never" generated on the 860. */
-	STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception.  "Never" generated on the 860. */
-	STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
-	STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
-	. = 0x600
-Alignment:
-	EXCEPTION_PROLOG(SRR0, SRR1)
-	mfspr	r4,DAR
-	stw	r4,_DAR(r21)
-	mfspr	r5,DSISR
-	stw	r5,_DSISR(r21)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
-	. = 0x700
-ProgramCheck:
-	EXCEPTION_PROLOG(SRR0, SRR1)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
-		MSR_KERNEL, COPY_EE)
-
-	/* FPU on MPC5xx available. We will use it later.
-	*/
-	STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
-	/* I guess we could implement decrementer, and may have
-	 * to someday for timekeeping.
-	 */
-	STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
-	STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
-	STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
-	STD_EXCEPTION(0xc00, SystemCall, UnknownException)
-	STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
-	STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
-	STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
-	/* On the MPC8xx, this is a software emulation interrupt.  It occurs
-	 * for all unimplemented and illegal instructions.
-	 */
-	STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
-	STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
-	STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
-	STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
-	STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
-
-	STD_EXCEPTION(0x1500, Reserved5, UnknownException)
-	STD_EXCEPTION(0x1600, Reserved6, UnknownException)
-	STD_EXCEPTION(0x1700, Reserved7, UnknownException)
-	STD_EXCEPTION(0x1800, Reserved8, UnknownException)
-	STD_EXCEPTION(0x1900, Reserved9, UnknownException)
-	STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
-	STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
-
-	STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
-	STD_EXCEPTION(0x1d00, InstructionBreakpoint, DebugException)
-	STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
-	STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
-
-
-	.globl	_end_of_vectors
-_end_of_vectors:
-
-
-	. = 0x2000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
-	.globl	transfer_to_handler
-transfer_to_handler:
-	stw	r22,_NIP(r21)
-	lis	r22,MSR_POW@h
-	andc	r23,r23,r22
-	stw	r23,_MSR(r21)
-	SAVE_GPR(7, r21)
-	SAVE_4GPRS(8, r21)
-	SAVE_8GPRS(12, r21)
-	SAVE_8GPRS(24, r21)
-	mflr	r23
-	andi.	r24,r23,0x3f00		/* get vector offset */
-	stw	r24,TRAP(r21)
-	li	r22,0
-	stw	r22,RESULT(r21)
-	mtspr	SPRG2,r22		/* r1 is now kernel sp */
-	lwz	r24,0(r23)		/* virtual address of handler */
-	lwz	r23,4(r23)		/* where to go when done */
-	mtspr	SRR0,r24
-	mtspr	SRR1,r20
-	mtlr	r23
-	SYNC
-	rfi				/* jump to handler, enable MMU */
-
-int_return:
-	mfmsr	r28			/* Disable interrupts */
-	li	r4,0
-	ori	r4,r4,MSR_EE
-	andc	r28,r28,r4
-	SYNC				/* Some chip revs need this... */
-	mtmsr	r28
-	SYNC
-	lwz	r2,_CTR(r1)
-	lwz	r0,_LINK(r1)
-	mtctr	r2
-	mtlr	r0
-	lwz	r2,_XER(r1)
-	lwz	r0,_CCR(r1)
-	mtspr	XER,r2
-	mtcrf	0xFF,r0
-	REST_10GPRS(3, r1)
-	REST_10GPRS(13, r1)
-	REST_8GPRS(23, r1)
-	REST_GPR(31, r1)
-	lwz	r2,_NIP(r1)		/* Restore environment */
-	lwz	r0,_MSR(r1)
-	mtspr	SRR0,r2
-	mtspr	SRR1,r0
-	lwz	r0,GPR0(r1)
-	lwz	r2,GPR2(r1)
-	lwz	r1,GPR1(r1)
-	SYNC
-	rfi
-
-
-/*
- * unsigned int get_immr (unsigned int mask)
- *
- * return (mask ? (IMMR & mask) : IMMR);
- */
-	.globl	get_immr
-get_immr:
-	mr	r4,r3		/* save mask */
-	mfspr	r3, IMMR	/* IMMR */
-	cmpwi	0,r4,0		/* mask != 0 ? */
-	beq	4f
-	and	r3,r3,r4	/* IMMR & mask */
-4:
-	blr
-
-	.globl get_pvr
-get_pvr:
-	mfspr	r3, PVR
-	blr
-
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
-	.globl	relocate_code
-relocate_code:
-	mr	r1,  r3		/* Set new stack pointer in SRAM	*/
-	mr	r9,  r4		/* Save copy of global data pointer in SRAM */
-	mr	r10, r5		/* Save copy of monitor destination Address in SRAM */
-
-	GET_GOT
-	mr	r3,  r5				/* Destination Address	*/
-	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
-	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
-	lwz	r5, GOT(__init_end)
-	sub	r5, r5, r4
-
-	/*
-	 * Fix GOT pointer:
-	 *
-	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
-	 *
-	 * Offset:
-	 */
-	sub	r15, r10, r4
-
-	/* First our own GOT */
-	add	r12, r12, r15
-	/* the the one used by the C code */
-	add	r30, r30, r15
-
-	/*
-	 * Now relocate code
-	 */
-
-	cmplw	cr1,r3,r4
-	addi	r0,r5,3
-	srwi.	r0,r0,2
-	beq	cr1,4f		/* In place copy is not necessary	*/
-	beq	4f		/* Protect against 0 count		*/
-	mtctr	r0
-	bge	cr1,2f
-
-	la	r8,-4(r4)
-	la	r7,-4(r3)
-1:	lwzu	r0,4(r8)
-	stwu	r0,4(r7)
-	bdnz	1b
-	b	4f
-
-2:	slwi	r0,r0,2
-	add	r8,r4,r0
-	add	r7,r3,r0
-3:	lwzu	r0,-4(r8)
-	stwu	r0,-4(r7)
-	bdnz	3b
-
-4:	sync
-	isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
-	addi	r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
-	mtlr	r0
-	blr
-
-in_ram:
-
-	/*
-	 * Relocation Function, r12 point to got2+0x8000
-	 *
-	 * Adjust got2 pointers, no need to check for 0, this code
-	 * already puts a few entries in the table.
-	 */
-	li	r0,__got2_entries@sectoff@l
-	la	r3,GOT(_GOT2_TABLE_)
-	lwz	r11,GOT(_GOT2_TABLE_)
-	mtctr	r0
-	sub	r11,r3,r11
-	addi	r3,r3,-4
-1:	lwzu	r0,4(r3)
-	cmpwi	r0,0
-	beq-	2f
-	add	r0,r0,r11
-	stw	r0,0(r3)
-2:	bdnz	1b
-
-	/*
-	 * Now adjust the fixups and the pointers to the fixups
-	 * in case we need to move ourselves again.
-	 */
-	li	r0,__fixup_entries@sectoff@l
-	lwz	r3,GOT(_FIXUP_TABLE_)
-	cmpwi	r0,0
-	mtctr	r0
-	addi	r3,r3,-4
-	beq	4f
-3:	lwzu	r4,4(r3)
-	lwzux	r0,r4,r11
-	cmpwi	r0,0
-	add	r0,r0,r11
-	stw	r4,0(r3)
-	beq-	5f
-	stw	r0,0(r4)
-5:	bdnz	3b
-4:
-clear_bss:
-	/*
-	 * Now clear BSS segment
-	 */
-	lwz	r3,GOT(__bss_start)
-	lwz	r4,GOT(__bss_end)
-	cmplw	0, r3, r4
-	beq	6f
-
-	li	r0, 0
-5:
-	stw	r0, 0(r3)
-	addi	r3, r3, 4
-	cmplw	0, r3, r4
-	bne	5b
-6:
-
-	mr	r3, r9		/* Global Data pointer		*/
-	mr	r4, r10		/* Destination Address		*/
-	bl	board_init_r
-
-	/*
-	 * Copy exception vector code to low memory
-	 *
-	 * r3: dest_addr
-	 * r7: source address, r8: end address, r9: target address
-	 */
-	.globl	trap_init
-trap_init:
-	mflr	r4			/* save link register		*/
-	GET_GOT
-	lwz	r7, GOT(_start)
-	lwz	r8, GOT(_end_of_vectors)
-
-	li	r9, 0x100		/* reset vector always at 0x100 */
-
-	cmplw	0, r7, r8
-	bgelr				/* return if r7>=r8 - just in case */
-1:
-	lwz	r0, 0(r7)
-	stw	r0, 0(r9)
-	addi	r7, r7, 4
-	addi	r9, r9, 4
-	cmplw	0, r7, r8
-	bne	1b
-
-	/*
-	 * relocate `hdlr' and `int_return' entries
-	 */
-	li	r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
-	li	r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
-	bl	trap_reloc
-	addi	r7, r7, 0x100		/* next exception vector	*/
-	cmplw	0, r7, r8
-	blt	2b
-
-	li	r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
-	bl	trap_reloc
-
-	li	r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
-	bl	trap_reloc
-
-	li	r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
-	li	r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
-	bl	trap_reloc
-	addi	r7, r7, 0x100		/* next exception vector	*/
-	cmplw	0, r7, r8
-	blt	3b
-
-	li	r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
-	li	r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
-	bl	trap_reloc
-	addi	r7, r7, 0x100		/* next exception vector	*/
-	cmplw	0, r7, r8
-	blt	4b
-
-	mtlr	r4			/* restore link register	*/
-	blr
-
-#if defined(CONFIG_PATI)
-/* Program the PLL */
-pll_prog_code_start:
-	lis	r4, (CONFIG_SYS_IMMR + 0x002fc384)@h
-	ori	r4, r4, (CONFIG_SYS_IMMR + 0x002fc384)@l
-	lis	r3, (0x55ccaa33)@h
-	ori	r3, r3, (0x55ccaa33)@l
-	stw	r3, 0(r4)
-	lis	r4, (CONFIG_SYS_IMMR + 0x002fc284)@h
-	ori	r4, r4, (CONFIG_SYS_IMMR + 0x002fc284)@l
-	lis	r3, CONFIG_SYS_PLPRCR@h
-	ori	r3, r3, CONFIG_SYS_PLPRCR@l
-	stw	r3, 0(r4)
-	addis	r3,0,0x0
-	ori	r3,r3,0xA000
-	mtctr	r3
-..spinlp:
-  bdnz    ..spinlp                /* spin loop */
-	blr
-pll_prog_code_end:
-	nop
-	blr
-#endif
diff --git a/arch/powerpc/cpu/mpc5xx/traps.c b/arch/powerpc/cpu/mpc5xx/traps.c
deleted file mode 100644
index 6f31d81493..0000000000
--- a/arch/powerpc/cpu/mpc5xx/traps.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * linux/arch/powerpc/kernel/traps.c
- *
- * Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#define END_OF_MEM	0x0001000
-
-
-/*
- * Print stack backtrace
- */
-static void print_backtrace(unsigned long *sp)
-{
-	int cnt = 0;
-	unsigned long i;
-
-	printf("Call backtrace: ");
-	while (sp) {
-		if ((uint)sp > END_OF_MEM)
-			break;
-
-		i = sp[1];
-		if (cnt++ % 7 == 0)
-			printf("\n");
-		printf("%08lX ", i);
-		if (cnt > 32) break;
-		sp = (unsigned long *)*sp;
-	}
-	printf("\n");
-}
-
-/*
- * Print current registers
- */
-void show_regs(struct pt_regs *regs)
-{
-	int i;
-	printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
-	       regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
-	printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
-	       regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
-	       regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
-	       regs->msr&MSR_IR ? 1 : 0,
-	       regs->msr&MSR_DR ? 1 : 0);
-
-	printf("\n");
-	for (i = 0;  i < 32;  i++) {
-		if ((i % 8) == 0)
-		{
-			printf("GPR%02d: ", i);
-		}
-
-		printf("%08lX ", regs->gpr[i]);
-		if ((i % 8) == 7)
-		{
-			printf("\n");
-		}
-	}
-}
-
-
-/*
- * General exception handler routine
- */
-static void _exception(int signr, struct pt_regs *regs)
-{
-	show_regs(regs);
-	print_backtrace((unsigned long *)regs->gpr[1]);
-	panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-/*
- * Machine check exception handler routine
- */
-void MachineCheckException(struct pt_regs *regs)
-{
-	unsigned long fixup;
-
-	/* Probing PCI using config cycles cause this exception
-	 * when a device is not present.  Catch it and return to
-	 * the PCI exception handler.
-	 */
-	if ((fixup = search_exception_table(regs->nip)) != 0) {
-		regs->nip = fixup;
-		return;
-	}
-
-#if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-		return;
-#endif
-
-	printf("Machine check in kernel mode.\n");
-	printf("Caused by (from msr): ");
-	printf("regs %p ",regs);
-	switch( regs->msr & 0x000F0000) {
-	case (0x80000000>>12):
-		printf("Machine check signal\n");
-		break;
-	case (0x80000000>>13):
-		printf("Transfer error ack signal\n");
-		break;
-	case (0x80000000>>14):
-		printf("Data parity signal\n");
-		break;
-	case (0x80000000>>15):
-		printf("Address parity signal\n");
-		break;
-	default:
-		printf("Unknown values in msr\n");
-	}
-	show_regs(regs);
-	print_backtrace((unsigned long *)regs->gpr[1]);
-	panic("machine check");
-}
-
-/*
- * Alignment exception handler routine
- */
-void AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-		return;
-#endif
-	show_regs(regs);
-	print_backtrace((unsigned long *)regs->gpr[1]);
-	panic("Alignment Exception");
-}
-
-/*
- * Program check exception handler routine
- */
-void ProgramCheckException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-		return;
-#endif
-	show_regs(regs);
-	print_backtrace((unsigned long *)regs->gpr[1]);
-	panic("Program Check Exception");
-}
-
-/*
- * Software emulation exception handler routine
- */
-void SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-		return;
-#endif
-	show_regs(regs);
-	print_backtrace((unsigned long *)regs->gpr[1]);
-	panic("Software Emulation Exception");
-}
-
-
-/*
- * Unknown exception handler routine
- */
-void UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-		return;
-#endif
-	printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
-	       regs->nip, regs->msr, regs->trap);
-	_exception(0, regs);
-}
-
-/*
- * Debug exception handler routine
- */
-void DebugException(struct pt_regs *regs)
-{
-	printf("Debugger trap at @ %lx\n", regs->nip );
-	show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
-	do_bedbug_breakpoint( regs );
-#endif
-}
diff --git a/arch/powerpc/cpu/mpc5xx/u-boot.lds b/arch/powerpc/cpu/mpc5xx/u-boot.lds
deleted file mode 100644
index 6a5357124d..0000000000
--- a/arch/powerpc/cpu/mpc5xx/u-boot.lds
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * (C) Copyright 2001-2010 Wolfgang Denk, DENX Software Engineering, wd@denx.de
- * (C) Copyright 2003	Martin Winistoerfer, martinwinistoerfer@gmx.ch
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    arch/powerpc/cpu/mpc5xx/start.o	(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-
-  __bss_end = . ;
-  PROVIDE (end = .);
-  . = env_start;
-  .ppcenv :
-  {
-    common/env_embedded.o (.ppcenv)
-  }
-}