board: imx8mp: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit

i.Core MX8M Plus is an EDIMM SoM based on NXP i.MX8M Plus from Engicam.

i.Core MX8M Plus needs to mount on top of this Evaluation board for
creating complete i.Core MX8M Plus EDIMM2.2 Starter Kit.

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>

2 files changed, 164 insertions, 0 deletions

diff --git a/arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2-u-boot.dtsi b/arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2-u-boot.dtsi
new file mode 100644
index 0000000000..342c523b0c
--- /dev/null
+++ b/arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2-u-boot.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+#include "imx8mp-u-boot.dtsi"
+
+/ {
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+		u-boot,dm-spl;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
+
+&reg_usdhc2_vmmc {
+	u-boot,off-on-delay-us = <20000>;
+};
+
+&reg_usdhc2_vmmc {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2_gpio {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&uart2 {
+	u-boot,dm-spl;
+};
+
+&crypto {
+	u-boot,dm-spl;
+};
+
+&sec_jr0 {
+	u-boot,dm-spl;
+};
+
+&sec_jr1 {
+	u-boot,dm-spl;
+};
+
+&sec_jr2 {
+	u-boot,dm-spl;
+};
+
+&i2c1 {
+	u-boot,dm-spl;
+};
+
+&i2c2 {
+	u-boot,dm-spl;
+};
+
+&i2c3 {
+	u-boot,dm-spl;
+};
+
+&i2c4 {
+	u-boot,dm-spl;
+};
+
+&i2c5 {
+	u-boot,dm-spl;
+};
+
+&i2c6 {
+	u-boot,dm-spl;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+	no-1-8-v;
+};
+
+&usdhc3 {
+	u-boot,dm-spl;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+};
+
+&wdog1 {
+	u-boot,dm-spl;
+};
+
+&eqos {
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	/delete-property/ assigned-clock-rates;
+};
+
+&ethphy0 {
+	reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <15000>;
+	reset-post-delay-us = <100000>;
+};
+
+&fec {
+	phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <15>;
+	phy-reset-post-delay = <100>;
+};
diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index 3470160990..8cd7c7a8dd 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -160,6 +160,20 @@ config TARGET_IMX8MP_DH_DHCOM_PDK2
 	select IMX8M_LPDDR4
 	select SUPPORT_SPL
 
+config TARGET_IMX8MP_ICORE_MX8MP
+	bool "Engicam i.Core MX8M Plus SOM"
+	select BINMAN
+	select IMX8MP
+	select IMX8M_LPDDR4
+	select SUPPORT_SPL
+	help
+	  i.Core MX8M Plus is an EDIMM SOM based on NXP i.MX8MP.
+
+	  i.Core MX8M Plus EDIMM2.2:
+	  * EDIMM2.2 is a Form Factor Capacitive Evaluation Board.
+	  * i.Core MX8M Plus needs to mount on top of EDIMM2.2 for
+	    creating complete i.Core MX8M Plus EDIMM2.2 Starter Kit.
+
 config TARGET_IMX8MP_EVK
 	bool "imx8mp LPDDR4 EVK board"
 	select BINMAN
@@ -287,6 +301,7 @@ source "board/compulab/imx8mm-cl-iot-gate/Kconfig"
 source "board/data_modul/imx8mm_edm_sbc/Kconfig"
 source "board/dhelectronics/dh_imx8mp/Kconfig"
 source "board/engicam/imx8mm/Kconfig"
+source "board/engicam/imx8mp/Kconfig"
 source "board/freescale/imx8mq_evk/Kconfig"
 source "board/freescale/imx8mm_evk/Kconfig"
 source "board/freescale/imx8mn_evk/Kconfig"