arm64: zynqmp: Fix addresses in partition definitions

Node name should be <name>@<address> which is not how partitions are
described.

Issue was found by running dtbs_check as:
flash@0: 'partition@qspi-device-tree', 'partition@qspi-fsbl-uboot',
'partition@qspi-linux', 'partition@qspi-rootfs'
do not match any of the regexes: ...

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

11 files changed, 44 insertions, 44 deletions

diff --git a/arch/arm/dts/zynqmp-zc1232-revA.dts b/arch/arm/dts/zynqmp-zc1232-revA.dts
index 87152afc32..afb3e96520 100644
--- a/arch/arm/dts/zynqmp-zc1232-revA.dts
+++ b/arch/arm/dts/zynqmp-zc1232-revA.dts
@@ -48,19 +48,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zc1254-revA.dts b/arch/arm/dts/zynqmp-zc1254-revA.dts
index d6b2834f3a..9cc1c0c6c5 100644
--- a/arch/arm/dts/zynqmp-zc1254-revA.dts
+++ b/arch/arm/dts/zynqmp-zc1254-revA.dts
@@ -48,19 +48,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
index fa3824d2a1..0805b93c4a 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
@@ -108,19 +108,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
index 6655b86a80..9b38b8b919 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
@@ -187,19 +187,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>; /* also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index fd6dfdd3c2..d250681600 100644
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -614,19 +614,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts
index 6375b47ff8..3ceb39dce0 100644
--- a/arch/arm/dts/zynqmp-zcu104-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revA.dts
@@ -209,19 +209,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts
index 425d7605bf..7dad4523de 100644
--- a/arch/arm/dts/zynqmp-zcu104-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revC.dts
@@ -222,19 +222,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
index a5c4309f2f..221685fd23 100644
--- a/arch/arm/dts/zynqmp-zcu106-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -612,19 +612,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index 755c30e9ff..d16bf8ac7a 100644
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -525,19 +525,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zcu1275-revA.dts b/arch/arm/dts/zynqmp-zcu1275-revA.dts
index 8755bc433b..cdd5c34187 100644
--- a/arch/arm/dts/zynqmp-zcu1275-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu1275-revA.dts
@@ -49,19 +49,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zcu1275-revB.dts b/arch/arm/dts/zynqmp-zcu1275-revB.dts
index 16f609c7e5..430fc5adb4 100644
--- a/arch/arm/dts/zynqmp-zcu1275-revB.dts
+++ b/arch/arm/dts/zynqmp-zcu1275-revB.dts
@@ -50,19 +50,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <1>;
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};