Merge tag 'xilinx-for-v2022.04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2022.04-rc1

gpio:
- Add modepin driver

net:
- Save random mac addresses to eth variable

zynqmp gem:
- Add support for mdio bus DT description
- Add support for reset and SGMII phy configuration
- Reduce timeout for MDIO accesses

zynqmp clk:
- Fix clock handling for gem and usb

phy:
- Add zynqmp phy/serdes driver

serial:
- Add one missing compatible string

microblaze:
- Symbol alignement
- SPL fixups
- Code cleanups

zynqmp:
- Various dt changes, DP pre-reloc, gem resets, gem clocks
- Switch SOM to shared psu configuration
- Move dcache handling to firmware driver
- Workaround gmii2rgmii DT description issue
- Enable broadcasts again
- Change firmware enablement logic
- Small adjustement in firmware driver

versal:
- Support new mmc@ DT nodes
- Fix run time variable handling
- Add missing I2C_PMC ID for power domain

3 files changed, 48 insertions, 30 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 44954977b6..8fc1897689 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1207,7 +1207,7 @@ config ARCH_ZYNQMP
 	select DM_SERIAL
 	select DM_SPI if SPI
 	select DM_SPI_FLASH if DM_SPI
-	select FIRMWARE
+	imply FIRMWARE
 	select GICV2
 	select GPIO_EXTRA_HEADER
 	select OF_CONTROL
@@ -1217,7 +1217,7 @@ config ARCH_ZYNQMP
 	select SPL_DM_SPI if SPI && SPL_DM
 	select SPL_DM_SPI_FLASH if SPL_DM_SPI
 	select SPL_DM_MAILBOX if SPL
-	select SPL_FIRMWARE if SPL
+	imply SPL_FIRMWARE if SPL
 	select SPL_SEPARATE_BSS if SPL
 	select SUPPORT_SPL
 	select ZYNQMP_IPI
@@ -1228,6 +1228,7 @@ config ARCH_ZYNQMP
 	imply FAT_WRITE
 	imply MP
 	imply DM_USB_GADGET
+	imply ZYNQMP_GPIO_MODEPIN if DM_GPIO && USB
 
 config ARCH_TEGRA
 	bool "NVIDIA Tegra"
diff --git a/arch/arm/dts/zynqmp-clk-ccf.dtsi b/arch/arm/dts/zynqmp-clk-ccf.dtsi
index b27b0aaf7c..664e65896d 100644
--- a/arch/arm/dts/zynqmp-clk-ccf.dtsi
+++ b/arch/arm/dts/zynqmp-clk-ccf.dtsi
@@ -169,28 +169,24 @@
 	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>,
 		 <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>,
 		 <&zynqmp_clk GEM_TSU>;
-	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
 };
 
 &gem1 {
 	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
 		 <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
 		 <&zynqmp_clk GEM_TSU>;
-	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
 };
 
 &gem2 {
 	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>,
 		 <&zynqmp_clk GEM2_TX>, <&zynqmp_clk GEM2_RX>,
 		 <&zynqmp_clk GEM_TSU>;
-	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
 };
 
 &gem3 {
 	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>,
 		 <&zynqmp_clk GEM3_TX>, <&zynqmp_clk GEM3_RX>,
 		 <&zynqmp_clk GEM_TSU>;
-	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
 };
 
 &gpio {
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index 1332f5373f..755a4ed2e5 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -265,7 +265,7 @@
 		};
 
 		/* GDMA */
-		fpd_dma_chan1: dma@fd500000 {
+		fpd_dma_chan1: dma-controller@fd500000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd500000 0x0 0x1000>;
@@ -276,9 +276,10 @@
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x14e8>;
 			power-domains = <&zynqmp_firmware PD_GDMA>;
+			#dma-cells = <1>;
 		};
 
-		fpd_dma_chan2: dma@fd510000 {
+		fpd_dma_chan2: dma-controller@fd510000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd510000 0x0 0x1000>;
@@ -289,9 +290,10 @@
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x14e9>;
 			power-domains = <&zynqmp_firmware PD_GDMA>;
+			#dma-cells = <1>;
 		};
 
-		fpd_dma_chan3: dma@fd520000 {
+		fpd_dma_chan3: dma-controller@fd520000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd520000 0x0 0x1000>;
@@ -302,9 +304,10 @@
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x14ea>;
 			power-domains = <&zynqmp_firmware PD_GDMA>;
+			#dma-cells = <1>;
 		};
 
-		fpd_dma_chan4: dma@fd530000 {
+		fpd_dma_chan4: dma-controller@fd530000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd530000 0x0 0x1000>;
@@ -315,9 +318,10 @@
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x14eb>;
 			power-domains = <&zynqmp_firmware PD_GDMA>;
+			#dma-cells = <1>;
 		};
 
-		fpd_dma_chan5: dma@fd540000 {
+		fpd_dma_chan5: dma-controller@fd540000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd540000 0x0 0x1000>;
@@ -328,9 +332,10 @@
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x14ec>;
 			power-domains = <&zynqmp_firmware PD_GDMA>;
+			#dma-cells = <1>;
 		};
 
-		fpd_dma_chan6: dma@fd550000 {
+		fpd_dma_chan6: dma-controller@fd550000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd550000 0x0 0x1000>;
@@ -341,9 +346,10 @@
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x14ed>;
 			power-domains = <&zynqmp_firmware PD_GDMA>;
+			#dma-cells = <1>;
 		};
 
-		fpd_dma_chan7: dma@fd560000 {
+		fpd_dma_chan7: dma-controller@fd560000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd560000 0x0 0x1000>;
@@ -354,9 +360,10 @@
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x14ee>;
 			power-domains = <&zynqmp_firmware PD_GDMA>;
+			#dma-cells = <1>;
 		};
 
-		fpd_dma_chan8: dma@fd570000 {
+		fpd_dma_chan8: dma-controller@fd570000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd570000 0x0 0x1000>;
@@ -367,6 +374,7 @@
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x14ef>;
 			power-domains = <&zynqmp_firmware PD_GDMA>;
+			#dma-cells = <1>;
 		};
 
 		gic: interrupt-controller@f9010000 {
@@ -396,7 +404,7 @@
 		 * These dma channels, Users should ensure that these dma
 		 * Channels are allowed for non secure access.
 		 */
-		lpd_dma_chan1: dma@ffa80000 {
+		lpd_dma_chan1: dma-controller@ffa80000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffa80000 0x0 0x1000>;
@@ -407,9 +415,10 @@
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x868>;
 			power-domains = <&zynqmp_firmware PD_ADMA>;
+			#dma-cells = <1>;
 		};
 
-		lpd_dma_chan2: dma@ffa90000 {
+		lpd_dma_chan2: dma-controller@ffa90000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffa90000 0x0 0x1000>;
@@ -420,9 +429,10 @@
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x869>;
 			power-domains = <&zynqmp_firmware PD_ADMA>;
+			#dma-cells = <1>;
 		};
 
-		lpd_dma_chan3: dma@ffaa0000 {
+		lpd_dma_chan3: dma-controller@ffaa0000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffaa0000 0x0 0x1000>;
@@ -433,9 +443,10 @@
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x86a>;
 			power-domains = <&zynqmp_firmware PD_ADMA>;
+			#dma-cells = <1>;
 		};
 
-		lpd_dma_chan4: dma@ffab0000 {
+		lpd_dma_chan4: dma-controller@ffab0000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffab0000 0x0 0x1000>;
@@ -446,9 +457,10 @@
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x86b>;
 			power-domains = <&zynqmp_firmware PD_ADMA>;
+			#dma-cells = <1>;
 		};
 
-		lpd_dma_chan5: dma@ffac0000 {
+		lpd_dma_chan5: dma-controller@ffac0000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffac0000 0x0 0x1000>;
@@ -459,9 +471,10 @@
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x86c>;
 			power-domains = <&zynqmp_firmware PD_ADMA>;
+			#dma-cells = <1>;
 		};
 
-		lpd_dma_chan6: dma@ffad0000 {
+		lpd_dma_chan6: dma-controller@ffad0000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffad0000 0x0 0x1000>;
@@ -472,9 +485,10 @@
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x86d>;
 			power-domains = <&zynqmp_firmware PD_ADMA>;
+			#dma-cells = <1>;
 		};
 
-		lpd_dma_chan7: dma@ffae0000 {
+		lpd_dma_chan7: dma-controller@ffae0000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffae0000 0x0 0x1000>;
@@ -485,9 +499,10 @@
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x86e>;
 			power-domains = <&zynqmp_firmware PD_ADMA>;
+			#dma-cells = <1>;
 		};
 
-		lpd_dma_chan8: dma@ffaf0000 {
+		lpd_dma_chan8: dma-controller@ffaf0000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffaf0000 0x0 0x1000>;
@@ -498,6 +513,7 @@
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x86f>;
 			power-domains = <&zynqmp_firmware PD_ADMA>;
+			#dma-cells = <1>;
 		};
 
 		mc: memory-controller@fd070000 {
@@ -527,12 +543,13 @@
 			interrupt-parent = <&gic>;
 			interrupts = <0 57 4>, <0 57 4>;
 			reg = <0x0 0xff0b0000 0x0 0x1000>;
-			clock-names = "pclk", "hclk", "tx_clk";
+			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x874>;
 			power-domains = <&zynqmp_firmware PD_ETH_0>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>;
 		};
 
 		gem1: ethernet@ff0c0000 {
@@ -541,12 +558,13 @@
 			interrupt-parent = <&gic>;
 			interrupts = <0 59 4>, <0 59 4>;
 			reg = <0x0 0xff0c0000 0x0 0x1000>;
-			clock-names = "pclk", "hclk", "tx_clk";
+			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x875>;
 			power-domains = <&zynqmp_firmware PD_ETH_1>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
 		};
 
 		gem2: ethernet@ff0d0000 {
@@ -555,12 +573,13 @@
 			interrupt-parent = <&gic>;
 			interrupts = <0 61 4>, <0 61 4>;
 			reg = <0x0 0xff0d0000 0x0 0x1000>;
-			clock-names = "pclk", "hclk", "tx_clk";
+			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x876>;
 			power-domains = <&zynqmp_firmware PD_ETH_2>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>;
 		};
 
 		gem3: ethernet@ff0e0000 {
@@ -569,12 +588,13 @@
 			interrupt-parent = <&gic>;
 			interrupts = <0 63 4>, <0 63 4>;
 			reg = <0x0 0xff0e0000 0x0 0x1000>;
-			clock-names = "pclk", "hclk", "tx_clk";
+			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x877>;
 			power-domains = <&zynqmp_firmware PD_ETH_3>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>;
 		};
 
 		gpio: gpio@ff0a0000 {
@@ -820,7 +840,7 @@
 
 		uart0: serial@ff000000 {
 			u-boot,dm-pre-reloc;
-			compatible = "cdns,uart-r1p12", "xlnx,xuartps";
+			compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 21 4>;
@@ -831,7 +851,7 @@
 
 		uart1: serial@ff010000 {
 			u-boot,dm-pre-reloc;
-			compatible = "cdns,uart-r1p12", "xlnx,xuartps";
+			compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 22 4>;
@@ -854,7 +874,7 @@
 			reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
 			ranges;
 
-			dwc3_0: dwc3@fe200000 {
+			dwc3_0: usb@fe200000 {
 				compatible = "snps,dwc3";
 				status = "disabled";
 				reg = <0x0 0xfe200000 0x0 0x40000>;
@@ -886,7 +906,7 @@
 			reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
 			ranges;
 
-			dwc3_1: dwc3@fe300000 {
+			dwc3_1: usb@fe300000 {
 				compatible = "snps,dwc3";
 				status = "disabled";
 				reg = <0x0 0xfe300000 0x0 0x40000>;
@@ -961,6 +981,7 @@
 		};
 
 		zynqmp_dpsub: display@fd4a0000 {
+			u-boot,dm-pre-reloc;
 			compatible = "xlnx,zynqmp-dpsub-1.7";
 			status = "disabled";
 			reg = <0x0 0xfd4a0000 0x0 0x1000>,