diff options
author | Heiko Thiery <heiko.thiery@gmail.com> | 2022-02-23 10:48:26 +0100 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2022-04-12 15:36:17 +0200 |
commit | 83fdfa64e45c97c24fc563f6850bec5b544ba452 (patch) | |
tree | 029522115e6b9ae99543ca5e0f9188ebc5679adb /arch/arm | |
parent | 775011980bf8dd131da8e387a0fd854e9615c158 (diff) |
ARM: imx: imx8mn-*-evk: use reset-gpios in phy node
To be in sync with the linux devicetree change the 'phy-reset-gpios' in
the fec node to 'reset-gpios' in the phy node. The PHY reset will be
done by the eth-phy-uclass driver while probing the PHY. This is ok
since it is done before probing the fec.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Tested-by: Marek Vasut <marex@denx.de> # 8MNANOD4-EVK
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/dts/imx8mn-evk.dtsi | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/arch/arm/dts/imx8mn-evk.dtsi b/arch/arm/dts/imx8mn-evk.dtsi index fc2c7f1d440..ed865444da5 100644 --- a/arch/arm/dts/imx8mn-evk.dtsi +++ b/arch/arm/dts/imx8mn-evk.dtsi @@ -53,7 +53,6 @@ pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; phy-handle = <ðphy0>; - phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; fsl,magic-packet; status = "okay"; @@ -64,6 +63,8 @@ ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; + reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; vddio-supply = <&vddio>; vddio: vddio-regulator { |