Merge tag 'fsl-qoriq-for-v2018.11-rc1' of git://git.denx.de/u-boot-fsl-qoriq

Switch to driver model for eSDHC on Layerscape SoCs including LS1021A,
LS1043A, LS1046A, LS1088A, LS2088A.
Switch to driver model for SATA on LS1021A and LS1043A.
Add support for LS1012AFRWY rev C board.
Enable SMMU for LS1043A.

22 files changed, 185 insertions, 85 deletions

diff --git a/arch/arm/cpu/armv7/ls102xa/Makefile b/arch/arm/cpu/armv7/ls102xa/Makefile
index f8300c7775..0c1596f330 100644
--- a/arch/arm/cpu/armv7/ls102xa/Makefile
+++ b/arch/arm/cpu/armv7/ls102xa/Makefile
@@ -10,7 +10,6 @@ obj-y	+= timer.o
 obj-y	+= fsl_epu.o
 obj-y	+= soc.o
 
-obj-$(CONFIG_SCSI_AHCI_PLAT) += ls102xa_sata.o
 obj-$(CONFIG_OF_LIBFDT) += fdt.o
 obj-$(CONFIG_SYS_HAS_SERDES) += fsl_ls1_serdes.o ls102xa_serdes.o
 obj-$(CONFIG_SPL) += spl.o
diff --git a/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c b/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c
index af413f8622..bb169aaaf4 100644
--- a/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c
+++ b/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c
@@ -73,6 +73,7 @@ static void __secure ls1_deepsleep_irq_cfg(void)
 	 * read, that is why we don't read it from register ippdexpcr1 itself.
 	 */
 	ippdexpcr1 = in_le32(&scfg->sparecr[7]);
+	out_be32(&rcpm->ippdexpcr1, ippdexpcr1);
 
 	if (ippdexpcr0 & RCPM_IPPDEXPCR0_ETSEC)
 		pmcintecr |= SCFG_PMCINTECR_ETSECRXG0 |
@@ -192,6 +193,9 @@ static void __secure ls1_deep_sleep(u32 entry_point)
 	setbits_be32(&scfg->dpslpcr, SCFG_DPSLPCR_WDRR_EN);
 	setbits_be32(&gur->crstsr, DCFG_CRSTSR_WDRFR);
 
+	/* Disable QE */
+	setbits_be32(&gur->devdisr, CCSR_DEVDISR1_QE);
+
 	ls1_deepsleep_irq_cfg();
 
 	psci_v7_flush_dcache_all();
diff --git a/arch/arm/cpu/armv7/ls102xa/ls102xa_sata.c b/arch/arm/cpu/armv7/ls102xa/ls102xa_sata.c
deleted file mode 100644
index c9fe7522fb..0000000000
--- a/arch/arm/cpu/armv7/ls102xa/ls102xa_sata.c
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2015 Freescale Semiconductor, Inc.
- */
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/immap_ls102xa.h>
-#include <ahci.h>
-#include <scsi.h>
-
-/* port register default value */
-#define AHCI_PORT_PHY_1_CFG	0xa003fffe
-#define AHCI_PORT_PHY_2_CFG	0x28183414
-#define AHCI_PORT_PHY_3_CFG	0x0e080e06
-#define AHCI_PORT_PHY_4_CFG	0x064a080b
-#define AHCI_PORT_PHY_5_CFG	0x2aa86470
-#define AHCI_PORT_TRANS_CFG	0x08000029
-
-#define SATA_ECC_REG_ADDR	0x20220520
-#define SATA_ECC_DISABLE	0x00020000
-
-int ls1021a_sata_init(void)
-{
-	struct ccsr_ahci __iomem *ccsr_ahci = (void *)AHCI_BASE_ADDR;
-
-#ifdef CONFIG_SYS_FSL_ERRATUM_A008407
-	out_le32((void *)SATA_ECC_REG_ADDR, SATA_ECC_DISABLE);
-#endif
-
-	out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
-	out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY_2_CFG);
-	out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY_3_CFG);
-	out_le32(&ccsr_ahci->pp4c, AHCI_PORT_PHY_4_CFG);
-	out_le32(&ccsr_ahci->pp5c, AHCI_PORT_PHY_5_CFG);
-	out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
-
-	ahci_init((void __iomem *)AHCI_BASE_ADDR);
-	scsi_scan(false);
-
-	return 0;
-}
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index 5d6f68aad6..91fdbad8be 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -29,6 +29,7 @@ endif
 ifneq ($(CONFIG_ARCH_LS1043A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls1043a_serdes.o
 obj-$(CONFIG_ARMV8_PSCI) += ls1043a_psci.o
+obj-y += icid.o ls1043_ids.o
 endif
 
 ifneq ($(CONFIG_ARCH_LS1012A),)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
index 653c6dddca..bc268e207c 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
@@ -192,6 +192,16 @@ int get_dspi_freq(ulong dummy)
 	return get_bus_freq(0) / CONFIG_SYS_FSL_DSPI_CLK_DIV;
 }
 
+#ifdef CONFIG_FSL_ESDHC
+int get_sdhc_freq(ulong dummy)
+{
+	if (!gd->arch.sdhc_clk)
+		get_clocks();
+
+	return gd->arch.sdhc_clk;
+}
+#endif
+
 int get_serial_clock(void)
 {
 	return get_bus_freq(0) / CONFIG_SYS_FSL_DUART_CLK_DIV;
@@ -202,6 +212,10 @@ unsigned int mxc_get_clock(enum mxc_clock clk)
 	switch (clk) {
 	case MXC_I2C_CLK:
 		return get_i2c_freq(0);
+#if defined(CONFIG_FSL_ESDHC)
+	case MXC_ESDHC_CLK:
+		return get_sdhc_freq(0);
+#endif
 	case MXC_DSPI_CLK:
 		return get_dspi_freq(0);
 	default:
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c
new file mode 100644
index 0000000000..0e8649427e
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <asm/arch-fsl-layerscape/immap_lsch2.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <asm/arch-fsl-layerscape/fsl_portals.h>
+#include <fsl_sec.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+};
+#endif
+
+struct icid_id_table icid_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	SET_QMAN_ICID(FSL_DPAA1_STREAM_ID_START),
+	SET_BMAN_ICID(FSL_DPAA1_STREAM_ID_START + 1),
+#endif
+
+	SET_SDHC_ICID(FSL_SDHC_STREAM_ID),
+
+	SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID),
+	SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID),
+	SET_USB_ICID(3, "snps,dwc3", FSL_USB3_STREAM_ID),
+
+	SET_SATA_ICID("fsl,ls1043a-ahci", FSL_SATA_STREAM_ID),
+	SET_QDMA_ICID("fsl,ls1043a-qdma", FSL_QDMA_STREAM_ID),
+	SET_EDMA_ICID(FSL_EDMA_STREAM_ID),
+	SET_ETR_ICID(FSL_ETR_STREAM_ID),
+	SET_DEBUG_ICID(FSL_DEBUG_STREAM_ID),
+	SET_QE_ICID(FSL_QE_STREAM_ID),
+#ifdef CONFIG_FSL_CAAM
+	SET_SEC_QI_ICID(FSL_DPAA1_STREAM_ID_START + 2),
+	SET_SEC_JR_ICID_ENTRY(0, FSL_DPAA1_STREAM_ID_START + 3),
+	SET_SEC_JR_ICID_ENTRY(1, FSL_DPAA1_STREAM_ID_START + 4),
+	SET_SEC_JR_ICID_ENTRY(2, FSL_DPAA1_STREAM_ID_START + 5),
+	SET_SEC_JR_ICID_ENTRY(3, FSL_DPAA1_STREAM_ID_START + 6),
+	SET_SEC_RTIC_ICID_ENTRY(0, FSL_DPAA1_STREAM_ID_START + 7),
+	SET_SEC_RTIC_ICID_ENTRY(1, FSL_DPAA1_STREAM_ID_START + 8),
+	SET_SEC_RTIC_ICID_ENTRY(2, FSL_DPAA1_STREAM_ID_START + 9),
+	SET_SEC_RTIC_ICID_ENTRY(3, FSL_DPAA1_STREAM_ID_START + 10),
+	SET_SEC_DECO_ICID_ENTRY(0, FSL_DPAA1_STREAM_ID_START + 11),
+	SET_SEC_DECO_ICID_ENTRY(1, FSL_DPAA1_STREAM_ID_START + 12),
+#endif
+};
+
+int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct fman_icid_id_table fman_icid_tbl[] = {
+	/* port id, icid */
+	SET_FMAN_ICID_ENTRY(0x02, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x03, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x04, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x05, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x06, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x07, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x08, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x09, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x0a, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x0b, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x0c, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x0d, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x28, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x29, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x2a, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x2b, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x2c, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x2d, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x10, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x11, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x30, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x31, FSL_DPAA1_STREAM_ID_END),
+};
+
+int fman_icid_tbl_sz = ARRAY_SIZE(fman_icid_tbl);
+#endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
index a31c4d93ab..d391f93041 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
@@ -99,7 +99,7 @@ int ppa_init(void)
 	cnt = DIV_ROUND_UP(fdt_header_len, 512);
 	debug("%s: MMC read PPA FIT header: dev # %u, block # %u, count %u\n",
 	      __func__, dev, blk, cnt);
-	ret = mmc->block_dev.block_read(&mmc->block_dev, blk, cnt, fitp);
+	ret = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, fitp);
 	if (ret != cnt) {
 		free(fitp);
 		printf("MMC/SD read of PPA FIT header at offset 0x%x failed\n",
@@ -123,7 +123,7 @@ int ppa_init(void)
 
 	blk = CONFIG_SYS_LS_PPA_ESBC_ADDR >> 9;
 	cnt = DIV_ROUND_UP(CONFIG_LS_PPA_ESBC_HDR_SIZE, 512);
-	ret = mmc->block_dev.block_read(&mmc->block_dev, blk, cnt, ppa_hdr_ddr);
+	ret = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, ppa_hdr_ddr);
 	if (ret != cnt) {
 		free(ppa_hdr_ddr);
 		printf("MMC/SD read of PPA header failed\n");
@@ -149,8 +149,7 @@ int ppa_init(void)
 	cnt = DIV_ROUND_UP(fw_length, 512);
 	debug("%s: MMC read PPA FIT image: dev # %u, block # %u, count %u\n",
 	      __func__, dev, blk, cnt);
-	ret = mmc->block_dev.block_read(&mmc->block_dev,
-					blk, cnt, ppa_fit_addr);
+	ret = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, ppa_fit_addr);
 	if (ret != cnt) {
 		free(ppa_fit_addr);
 		printf("MMC/SD read of PPA FIT header at offset 0x%x failed\n",
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 3f15cb08ff..54fb0745f9 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -634,7 +634,7 @@ void fsl_lsch2_early_init_f(void)
 	erratum_a008997();
 	erratum_a009007();
 
-#ifdef CONFIG_ARCH_LS1046A
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
 	set_icids();
 #endif
 }
diff --git a/arch/arm/dts/fsl-ls1043a-qds.dtsi b/arch/arm/dts/fsl-ls1043a-qds.dtsi
index addb9abfb9..3841aee11e 100644
--- a/arch/arm/dts/fsl-ls1043a-qds.dtsi
+++ b/arch/arm/dts/fsl-ls1043a-qds.dtsi
@@ -174,3 +174,7 @@
 &lpuart0 {
 	status = "okay";
 };
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi
index ff401222ff..bb70992f9e 100644
--- a/arch/arm/dts/fsl-ls1043a.dtsi
+++ b/arch/arm/dts/fsl-ls1043a.dtsi
@@ -70,6 +70,14 @@
 			status = "disabled";
 		};
 
+		esdhc: esdhc@1560000 {
+			compatible = "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <0 62 0x4>;
+			big-endian;
+			bus-width = <4>;
+		};
+
 		ifc: ifc@1530000 {
 			compatible = "fsl,ifc", "simple-bus";
 			reg = <0x0 0x1530000 0x0 0x10000>;
@@ -279,5 +287,13 @@
 			ranges = <0x81000000 0x0 0x00000000 0x50 0x00020000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1043a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>;
+			interrupts = <0 69 4>;
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/dts/fsl-ls1046a.dtsi b/arch/arm/dts/fsl-ls1046a.dtsi
index 4acbaf78e8..7687d12091 100644
--- a/arch/arm/dts/fsl-ls1046a.dtsi
+++ b/arch/arm/dts/fsl-ls1046a.dtsi
@@ -70,6 +70,14 @@
 			status = "disabled";
 		};
 
+		esdhc: esdhc@1560000 {
+			compatible = "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <0 62 0x4>;
+			big-endian;
+			bus-width = <4>;
+		};
+
 		ifc: ifc@1530000 {
 			compatible = "fsl,ifc", "simple-bus";
 			reg = <0x0 0x1530000 0x0 0x10000>;
diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi
index 077caf3cc2..72d755a18c 100644
--- a/arch/arm/dts/fsl-ls1088a.dtsi
+++ b/arch/arm/dts/fsl-ls1088a.dtsi
@@ -74,6 +74,15 @@
 		reg-names = "QuadSPI", "QuadSPI-memory";
 		num-cs = <4>;
 	};
+
+	esdhc: esdhc@2140000 {
+		compatible = "fsl,esdhc";
+		reg = <0x0 0x2140000 0x0 0x10000>;
+		interrupts = <0 28 0x4>; /* Level high type */
+		little-endian;
+		bus-width = <4>;
+	};
+
 	ifc: ifc@1530000 {
 		compatible = "fsl,ifc", "simple-bus";
 		reg = <0x0 0x2240000 0x0 0x20000>;
diff --git a/arch/arm/dts/fsl-ls2080a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi
index b0f85170b0..2d537ae606 100644
--- a/arch/arm/dts/fsl-ls2080a.dtsi
+++ b/arch/arm/dts/fsl-ls2080a.dtsi
@@ -75,6 +75,14 @@
 		num-cs = <4>;
 	};
 
+	esdhc: esdhc@0 {
+		compatible = "fsl,esdhc";
+		reg = <0x0 0x2140000 0x0 0x10000>;
+		interrupts = <0 28 0x4>; /* Level high type */
+		little-endian;
+		bus-width = <4>;
+	};
+
 	usb0: usb3@3100000 {
 		compatible = "fsl,layerscape-dwc3";
 		reg = <0x0 0x3100000 0x0 0x10000>;
diff --git a/arch/arm/dts/ls1021a-qds.dtsi b/arch/arm/dts/ls1021a-qds.dtsi
index fb1af1568b..47c128f16f 100644
--- a/arch/arm/dts/ls1021a-qds.dtsi
+++ b/arch/arm/dts/ls1021a-qds.dtsi
@@ -212,3 +212,7 @@
 &uart1 {
 	status = "okay";
 };
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/dts/ls1021a-twr.dtsi b/arch/arm/dts/ls1021a-twr.dtsi
index 63f2079ed3..14e0ceafe7 100644
--- a/arch/arm/dts/ls1021a-twr.dtsi
+++ b/arch/arm/dts/ls1021a-twr.dtsi
@@ -103,3 +103,7 @@
 &uart1 {
 	status = "okay";
 };
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/dts/ls1021a.dtsi b/arch/arm/dts/ls1021a.dtsi
index 5b3fc6ad44..7670a39617 100644
--- a/arch/arm/dts/ls1021a.dtsi
+++ b/arch/arm/dts/ls1021a.dtsi
@@ -96,7 +96,6 @@
 			sdhci,auto-cmd12;
 			big-endian;
 			bus-width = <4>;
-			status = "disabled";
 		};
 
 		scfg: scfg@1570000 {
@@ -404,5 +403,12 @@
 			ranges = <0x81000000 0x0 0x00000000 0x34020000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x38000000 0x38000000 0x0 0x08000000>; /* non-prefetchable memory */
 		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1021a-ahci";
+			reg = <0x3200000 0x10000>;
+			interrupts = <0 101 4>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index 8a05148136..bd4ca88e16 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -195,6 +195,7 @@
 /* SoC related */
 #ifdef CONFIG_ARCH_LS1043A
 #define CONFIG_SYS_FMAN_V3
+#define CONFIG_SYS_FSL_QMAN_V3
 #define CONFIG_SYS_NUM_FMAN			1
 #define CONFIG_SYS_NUM_FM1_DTSEC		7
 #define CONFIG_SYS_NUM_FM1_10GEC		1
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
index a70c866651..a3f473fe28 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
@@ -68,6 +68,10 @@ void fdt_fixup_icid(void *blob);
 #define SET_DEBUG_ICID(streamid) \
 	SET_SCFG_ICID(NULL, streamid, debug_icid, 0)
 
+#define SET_QE_ICID(streamid) \
+	SET_SCFG_ICID("fsl,qe", streamid, qe_icid,\
+		QE_BASE_ADDR)
+
 #define SET_QMAN_ICID(streamid) \
 	SET_ICID_ENTRY("fsl,qman", streamid, streamid, \
 		offsetof(struct ccsr_qman, liodnr) + \
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index be0a6ae363..8c10526a6c 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -85,6 +85,8 @@
 #define GPIO3_BASE_ADDR				(CONFIG_SYS_IMMR + 0x1320000)
 #define GPIO4_BASE_ADDR				(CONFIG_SYS_IMMR + 0x1330000)
 
+#define QE_BASE_ADDR				(CONFIG_SYS_IMMR + 0x1400000)
+
 #define LPUART_BASE				(CONFIG_SYS_IMMR + 0x01950000)
 
 #define EDMA_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01c00000)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
index afea9b8da8..8d002da3ed 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
@@ -35,6 +35,9 @@
  *  -DPAA2
  *     -u-boot will allocate a range of stream IDs to be used by the Management
  *      Complex for containers and will set these values in the MC DPC image.
+ *     -u-boot will fixup the iommu-map property in the fsl-mc node in the
+ *      device tree (see Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
+ *      for more info on the msi-map definition)
  *     -the MC is responsible for allocating and setting up 'isolation context
  *      IDs (ICIDs) based on the allocated stream IDs for all DPAA2 devices.
  *
diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
index 13a282ffe1..137cd61804 100644
--- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -86,6 +86,8 @@ struct sys_info {
 	unsigned long freq_localbus;
 };
 
+#define CCSR_DEVDISR1_QE	0x00000001
+
 /* Device Configuration and Pin Control */
 struct ccsr_gur {
 	u32     porsr1;         /* POR status 1 */
@@ -389,33 +391,6 @@ struct ccsr_serdes {
 	u8	res_a00[0x1000-0xa00];	/* from 0xa00 to 0xfff */
 };
 
-
-
-/* AHCI (sata) register map */
-struct ccsr_ahci {
-	u32 res1[0xa4/4];	/* 0x0 - 0xa4 */
-	u32 pcfg;	/* port config */
-	u32 ppcfg;	/* port phy1 config */
-	u32 pp2c;	/* port phy2 config */
-	u32 pp3c;	/* port phy3 config */
-	u32 pp4c;	/* port phy4 config */
-	u32 pp5c;	/* port phy5 config */
-	u32 paxic;	/* port AXI config */
-	u32 axicc;	/* AXI cache control */
-	u32 axipc;	/* AXI PROT control */
-	u32 ptc;	/* port Trans Config */
-	u32 pts;	/* port Trans Status */
-	u32 plc;	/* port link config */
-	u32 plc1;	/* port link config1 */
-	u32 plc2;	/* port link config2 */
-	u32 pls;	/* port link status */
-	u32 pls1;	/* port link status1 */
-	u32 pcmdc;	/* port CMD config */
-	u32 ppcs;	/* port phy control status */
-	u32 pberr;	/* port 0/1 BIST error */
-	u32 cmds;	/* port 0/1 CMD status error */
-};
-
 #define RCPM_POWMGTCSR			0x130
 #define RCPM_POWMGTCSR_SERDES_PW	0x80000000
 #define RCPM_POWMGTCSR_LPM20_REQ	0x00100000
diff --git a/arch/arm/include/asm/arch-ls102xa/ls102xa_sata.h b/arch/arm/include/asm/arch-ls102xa/ls102xa_sata.h
deleted file mode 100644
index 3acc5af6f2..0000000000
--- a/arch/arm/include/asm/arch-ls102xa/ls102xa_sata.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2015 Freescale Semiconductor, Inc.
- */
-
-#ifndef __FSL_SATA_H_
-#define __FSL_SATA_H_
-
-int ls1021a_sata_init(void);
-#endif