ARM: uniphier: move PLL init code to U-Boot proper where possible

The PLL for the DRAM interface must be initialized in SPL, but the
others can be delayed until U-Boot proper.  Move them from SPL to
U-Boot proper to save the precious SPL memory footprint.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

1 files changed, 6 insertions, 154 deletions

diff --git a/arch/arm/mach-uniphier/pll/pll-init-ld4.c b/arch/arm/mach-uniphier/pll/pll-init-ld4.c
index 57c1d9f7df..a40b30d0e0 100644
--- a/arch/arm/mach-uniphier/pll/pll-init-ld4.c
+++ b/arch/arm/mach-uniphier/pll/pll-init-ld4.c
@@ -1,5 +1,6 @@
 /*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2013-2014 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -10,12 +11,12 @@
 
 #include "../init.h"
 #include "../sc-regs.h"
-#include "../sg-regs.h"
 
 #undef DPLL_SSC_RATE_1PER
 
-static int dpll_init(unsigned int dram_freq)
+int uniphier_ld4_dpll_init(const struct uniphier_board_data *bd)
 {
+	unsigned int dram_freq = bd->dram_freq;
 	u32 tmp;
 
 	/*
@@ -48,157 +49,8 @@ static int dpll_init(unsigned int dram_freq)
 	tmp |= SC_DPLLCTRL2_NRSTDS;
 	writel(tmp, SC_DPLLCTRL2);
 
-	return 0;
-}
-
-static void upll_init(void)
-{
-	u32 tmp, clk_mode_upll, clk_mode_axosel;
-
-	tmp = readl(SG_PINMON0);
-	clk_mode_upll   = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK;
-	clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
-
-	/* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */
-	tmp = readl(SC_UPLLCTRL);
-	tmp &= ~0x18000000;
-	writel(tmp, SC_UPLLCTRL);
-
-	if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) {
-		if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
-		    clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
-			/* AXO: 25MHz */
-			tmp &= ~0x07ffffff;
-			tmp |= 0x0228f5c0;
-		} else {
-			/* AXO: default 24.576MHz */
-			tmp &= ~0x07ffffff;
-			tmp |= 0x02328000;
-		}
-	}
-
-	writel(tmp, SC_UPLLCTRL);
-
-	/* set 1 to K_LD(UPLLCTRL.bit[27]) */
-	tmp |= 0x08000000;
-	writel(tmp, SC_UPLLCTRL);
-
-	/* wait 10 usec */
-	udelay(10);
-
-	/* set 1 to SNRT(UPLLCTRL.bit[28]) */
-	tmp |= 0x10000000;
-	writel(tmp, SC_UPLLCTRL);
-}
-
-static void vpll_init(void)
-{
-	u32 tmp, clk_mode_axosel;
-
-	tmp = readl(SG_PINMON0);
-	clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
-
-	/* set 1 to VPLA27WP and VPLA27WP */
-	tmp = readl(SC_VPLL27ACTRL);
-	tmp |= 0x00000001;
-	writel(tmp, SC_VPLL27ACTRL);
-	tmp = readl(SC_VPLL27BCTRL);
-	tmp |= 0x00000001;
-	writel(tmp, SC_VPLL27BCTRL);
-
-	/* Set 0 to VPLA_K_LD and VPLB_K_LD */
-	tmp = readl(SC_VPLL27ACTRL3);
-	tmp &= ~0x10000000;
-	writel(tmp, SC_VPLL27ACTRL3);
-	tmp = readl(SC_VPLL27BCTRL3);
-	tmp &= ~0x10000000;
-	writel(tmp, SC_VPLL27BCTRL3);
-
-	/* Set 0 to VPLA_SNRST and VPLB_SNRST */
-	tmp = readl(SC_VPLL27ACTRL2);
-	tmp &= ~0x10000000;
-	writel(tmp, SC_VPLL27ACTRL2);
-	tmp = readl(SC_VPLL27BCTRL2);
-	tmp &= ~0x10000000;
-	writel(tmp, SC_VPLL27BCTRL2);
-
-	/* Set 0x20 to VPLA_SNRST and VPLB_SNRST */
-	tmp = readl(SC_VPLL27ACTRL2);
-	tmp &= ~0x0000007f;
-	tmp |= 0x00000020;
-	writel(tmp, SC_VPLL27ACTRL2);
-	tmp = readl(SC_VPLL27BCTRL2);
-	tmp &= ~0x0000007f;
-	tmp |= 0x00000020;
-	writel(tmp, SC_VPLL27BCTRL2);
-
-	if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
-	    clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
-		/* AXO: 25MHz */
-		tmp = readl(SC_VPLL27ACTRL3);
-		tmp &= ~0x000fffff;
-		tmp |= 0x00066664;
-		writel(tmp, SC_VPLL27ACTRL3);
-		tmp = readl(SC_VPLL27BCTRL3);
-		tmp &= ~0x000fffff;
-		tmp |= 0x00066664;
-		writel(tmp, SC_VPLL27BCTRL3);
-	} else {
-		/* AXO: default 24.576MHz */
-		tmp = readl(SC_VPLL27ACTRL3);
-		tmp &= ~0x000fffff;
-		tmp |= 0x000f5800;
-		writel(tmp, SC_VPLL27ACTRL3);
-		tmp = readl(SC_VPLL27BCTRL3);
-		tmp &= ~0x000fffff;
-		tmp |= 0x000f5800;
-		writel(tmp, SC_VPLL27BCTRL3);
-	}
-
-	/* Set 1 to VPLA_K_LD and VPLB_K_LD */
-	tmp = readl(SC_VPLL27ACTRL3);
-	tmp |= 0x10000000;
-	writel(tmp, SC_VPLL27ACTRL3);
-	tmp = readl(SC_VPLL27BCTRL3);
-	tmp |= 0x10000000;
-	writel(tmp, SC_VPLL27BCTRL3);
-
-	/* wait 10 usec */
-	udelay(10);
-
-	/* Set 0 to VPLA_SNRST and VPLB_SNRST */
-	tmp = readl(SC_VPLL27ACTRL2);
-	tmp |= 0x10000000;
-	writel(tmp, SC_VPLL27ACTRL2);
-	tmp = readl(SC_VPLL27BCTRL2);
-	tmp |= 0x10000000;
-	writel(tmp, SC_VPLL27BCTRL2);
-
-	/* set 0 to VPLA27WP and VPLA27WP */
-	tmp = readl(SC_VPLL27ACTRL);
-	tmp &= ~0x00000001;
-	writel(tmp, SC_VPLL27ACTRL);
-	tmp = readl(SC_VPLL27BCTRL);
-	tmp |= ~0x00000001;
-	writel(tmp, SC_VPLL27BCTRL);
-}
-
-int uniphier_ld4_pll_init(const struct uniphier_board_data *bd)
-{
-	int ret;
-
-	ret = dpll_init(bd->dram_freq);
-	if (ret)
-		return ret;
-	upll_init();
-	vpll_init();
-
-	/*
-	 * Wait 500 usec until dpll get stable
-	 * We wait 10 usec in upll_init() and vpll_init()
-	 * so 20 usec can be saved here.
-	 */
-	udelay(480);
+	/* Wait 500 usec until dpll gets stable */
+	udelay(500);
 
 	return 0;
 }