diff options
| author | Samuel Holland <samuel@sholland.org> | 2021-10-08 00:17:24 -0500 |
|---|---|---|
| committer | Andre Przywara <andre.przywara@arm.com> | 2021-10-12 11:01:17 +0100 |
| commit | 2421497cb78b7647ff7592acda3d444caa120f01 (patch) | |
| tree | e83a736271f7f6ad91a93fdb5cb4a132232da72c /arch/arm/mach-sunxi | |
| parent | 8b0eacdf2b0d472d991c3af4a236ad02759fc59e (diff) | |
sunxi: video: Convert panel I2C to use DM_I2C
Two displays supported by the sunxi display driver (each one used by a
single board) require initialization over I2C. Both previously used
i2c_soft; replace this with the i2c-gpio instance that already exists in
those boards' device trees (sun5i-a13-utoo-p66 and sun6i-a31-colombus).
Since the i2c-gpio nodes are not referenced by any other node in the
device trees (the device trees have no panel node), the I2C bus is
selected by its node name.
This panel initialization code was the only i2c_soft user, so the
i2c_soft GPIO setup code can be removed now as well.
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Diffstat (limited to 'arch/arm/mach-sunxi')
| -rw-r--r-- | arch/arm/mach-sunxi/Kconfig | 21 |
1 files changed, 6 insertions, 15 deletions
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 83f8f9513f..c1e762a518 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -909,27 +909,18 @@ config VIDEO_LCD_BL_PWM_ACTIVE_LOW config VIDEO_LCD_PANEL_I2C bool "LCD panel needs to be configured via i2c" depends on VIDEO_SUNXI - select CMD_I2C + select DM_I2C + select DM_I2C_GPIO ---help--- Say y here if the LCD panel needs to be configured via i2c. This will add a bitbang i2c controller using gpios to talk to the LCD. -config VIDEO_LCD_PANEL_I2C_SDA - string "LCD panel i2c interface SDA pin" - depends on VIDEO_LCD_PANEL_I2C - default "PG12" - ---help--- - Set the SDA pin for the LCD i2c interface. This takes a string in the - format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. - -config VIDEO_LCD_PANEL_I2C_SCL - string "LCD panel i2c interface SCL pin" +config VIDEO_LCD_PANEL_I2C_NAME + string "LCD panel i2c interface node name" depends on VIDEO_LCD_PANEL_I2C - default "PG10" + default "i2c@0" ---help--- - Set the SCL pin for the LCD i2c interface. This takes a string in the - format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. - + Set the device tree node name for the LCD i2c interface. # Note only one of these may be selected at a time! But hidden choices are # not supported by Kconfig |