arm: stm32mp: move code for STM32MP15x

Move code and defines only needed for CONFIG_STM32MP15x in stm32mp15x.c
when low level init without TFABOOT is supported.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

6 files changed, 377 insertions, 324 deletions

diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile
index 391b47cf13..d362104fee 100644
--- a/arch/arm/mach-stm32mp/Makefile
+++ b/arch/arm/mach-stm32mp/Makefile
@@ -8,6 +8,8 @@ obj-y += dram_init.o
 obj-y += syscon.o
 obj-y += bsec.o
 
+obj-$(CONFIG_STM32MP15x) += stm32mp15x.o
+
 ifdef CONFIG_SPL_BUILD
 obj-y += spl.o
 obj-y += tzc400.o
diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/cpu.c
index 6f44c75515..b808964d3e 100644
--- a/arch/arm/mach-stm32mp/cpu.c
+++ b/arch/arm/mach-stm32mp/cpu.c
@@ -16,7 +16,6 @@
 #include <misc.h>
 #include <net.h>
 #include <asm/io.h>
-#include <asm/arch/bsec.h>
 #include <asm/arch/stm32.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/global_data.h>
@@ -24,67 +23,6 @@
 #include <dm/uclass.h>
 #include <linux/bitops.h>
 
-/* RCC register */
-#define RCC_TZCR		(STM32_RCC_BASE + 0x00)
-#define RCC_DBGCFGR		(STM32_RCC_BASE + 0x080C)
-#define RCC_BDCR		(STM32_RCC_BASE + 0x0140)
-#define RCC_MP_APB5ENSETR	(STM32_RCC_BASE + 0x0208)
-#define RCC_MP_AHB5ENSETR	(STM32_RCC_BASE + 0x0210)
-#define RCC_BDCR_VSWRST		BIT(31)
-#define RCC_BDCR_RTCSRC		GENMASK(17, 16)
-#define RCC_DBGCFGR_DBGCKEN	BIT(8)
-
-/* Security register */
-#define ETZPC_TZMA1_SIZE	(STM32_ETZPC_BASE + 0x04)
-#define ETZPC_DECPROT0		(STM32_ETZPC_BASE + 0x10)
-
-#define TZC_GATE_KEEPER		(STM32_TZC_BASE + 0x008)
-#define TZC_REGION_ATTRIBUTE0	(STM32_TZC_BASE + 0x110)
-#define TZC_REGION_ID_ACCESS0	(STM32_TZC_BASE + 0x114)
-
-#define TAMP_CR1		(STM32_TAMP_BASE + 0x00)
-
-#define PWR_CR1			(STM32_PWR_BASE + 0x00)
-#define PWR_MCUCR		(STM32_PWR_BASE + 0x14)
-#define PWR_CR1_DBP		BIT(8)
-#define PWR_MCUCR_SBF		BIT(6)
-
-/* DBGMCU register */
-#define DBGMCU_IDC		(STM32_DBGMCU_BASE + 0x00)
-#define DBGMCU_APB4FZ1		(STM32_DBGMCU_BASE + 0x2C)
-#define DBGMCU_APB4FZ1_IWDG2	BIT(2)
-#define DBGMCU_IDC_DEV_ID_MASK	GENMASK(11, 0)
-#define DBGMCU_IDC_DEV_ID_SHIFT	0
-#define DBGMCU_IDC_REV_ID_MASK	GENMASK(31, 16)
-#define DBGMCU_IDC_REV_ID_SHIFT	16
-
-/* GPIOZ registers */
-#define GPIOZ_SECCFGR		0x54004030
-
-/* boot interface from Bootrom
- * - boot instance = bit 31:16
- * - boot device = bit 15:0
- */
-#define BOOTROM_PARAM_ADDR	0x2FFC0078
-#define BOOTROM_MODE_MASK	GENMASK(15, 0)
-#define BOOTROM_MODE_SHIFT	0
-#define BOOTROM_INSTANCE_MASK	 GENMASK(31, 16)
-#define BOOTROM_INSTANCE_SHIFT	16
-
-/* Device Part Number (RPN) = OTP_DATA1 lower 8 bits */
-#define RPN_SHIFT	0
-#define RPN_MASK	GENMASK(7, 0)
-
-/* Package = bit 27:29 of OTP16
- * - 100: LBGA448 (FFI) => AA = LFBGA 18x18mm 448 balls p. 0.8mm
- * - 011: LBGA354 (LCI) => AB = LFBGA 16x16mm 359 balls p. 0.8mm
- * - 010: TFBGA361 (FFC) => AC = TFBGA 12x12mm 361 balls p. 0.5mm
- * - 001: TFBGA257 (LCC) => AD = TFBGA 10x10mm 257 balls p. 0.5mm
- * - others: Reserved
- */
-#define PKG_SHIFT	27
-#define PKG_MASK	GENMASK(2, 0)
-
 /*
  * early TLB into the .data section so that it not get cleared
  * with 16kB allignment (see TTBR0_BASE_ADDR_MASK)
@@ -93,121 +31,6 @@ u8 early_tlb[PGTABLE_SIZE] __section(".data") __aligned(0x4000);
 
 struct lmb lmb;
 
-static void security_init(void)
-{
-	/* Disable the backup domain write protection */
-	/* the protection is enable at each reset by hardware */
-	/* And must be disable by software */
-	setbits_le32(PWR_CR1, PWR_CR1_DBP);
-
-	while (!(readl(PWR_CR1) & PWR_CR1_DBP))
-		;
-
-	/* If RTC clock isn't enable so this is a cold boot then we need
-	 * to reset the backup domain
-	 */
-	if (!(readl(RCC_BDCR) & RCC_BDCR_RTCSRC)) {
-		setbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
-		while (!(readl(RCC_BDCR) & RCC_BDCR_VSWRST))
-			;
-		clrbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
-	}
-
-	/* allow non secure access in Write/Read for all peripheral */
-	writel(GENMASK(25, 0), ETZPC_DECPROT0);
-
-	/* Open SYSRAM for no secure access */
-	writel(0x0, ETZPC_TZMA1_SIZE);
-
-	/* enable TZC1 TZC2 clock */
-	writel(BIT(11) | BIT(12), RCC_MP_APB5ENSETR);
-
-	/* Region 0 set to no access by default */
-	/* bit 0 / 16 => nsaid0 read/write Enable
-	 * bit 1 / 17 => nsaid1 read/write Enable
-	 * ...
-	 * bit 15 / 31 => nsaid15 read/write Enable
-	 */
-	writel(0xFFFFFFFF, TZC_REGION_ID_ACCESS0);
-	/* bit 30 / 31 => Secure Global Enable : write/read */
-	/* bit 0 / 1 => Region Enable for filter 0/1 */
-	writel(BIT(0) | BIT(1) | BIT(30) | BIT(31), TZC_REGION_ATTRIBUTE0);
-
-	/* Enable Filter 0 and 1 */
-	setbits_le32(TZC_GATE_KEEPER, BIT(0) | BIT(1));
-
-	/* RCC trust zone deactivated */
-	writel(0x0, RCC_TZCR);
-
-	/* TAMP: deactivate the internal tamper
-	 * Bit 23 ITAMP8E: monotonic counter overflow
-	 * Bit 20 ITAMP5E: RTC calendar overflow
-	 * Bit 19 ITAMP4E: HSE monitoring
-	 * Bit 18 ITAMP3E: LSE monitoring
-	 * Bit 16 ITAMP1E: RTC power domain supply monitoring
-	 */
-	writel(0x0, TAMP_CR1);
-
-	/* GPIOZ: deactivate the security */
-	writel(BIT(0), RCC_MP_AHB5ENSETR);
-	writel(0x0, GPIOZ_SECCFGR);
-}
-
-/*
- * Debug init
- */
-static void dbgmcu_init(void)
-{
-	/*
-	 * Freeze IWDG2 if Cortex-A7 is in debug mode
-	 * done in TF-A for TRUSTED boot and
-	 * DBGMCU access is controlled by BSEC_DENABLE.DBGSWENABLE
-	*/
-	if (bsec_dbgswenable()) {
-		setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);
-		setbits_le32(DBGMCU_APB4FZ1, DBGMCU_APB4FZ1_IWDG2);
-	}
-}
-
-void spl_board_init(void)
-{
-	struct udevice *dev;
-	int ret;
-
-	dbgmcu_init();
-
-	/* force probe of BSEC driver to shadow the upper OTP */
-	ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(stm32mp_bsec), &dev);
-	if (ret)
-		log_warning("BSEC probe failed: %d\n", ret);
-}
-
-/* get bootmode from ROM code boot context: saved in TAMP register */
-static void update_bootmode(void)
-{
-	u32 boot_mode;
-	u32 bootrom_itf = readl(BOOTROM_PARAM_ADDR);
-	u32 bootrom_device, bootrom_instance;
-
-	/* enable TAMP clock = RTCAPBEN */
-	writel(BIT(8), RCC_MP_APB5ENSETR);
-
-	/* read bootrom context */
-	bootrom_device =
-		(bootrom_itf & BOOTROM_MODE_MASK) >> BOOTROM_MODE_SHIFT;
-	bootrom_instance =
-		(bootrom_itf & BOOTROM_INSTANCE_MASK) >> BOOTROM_INSTANCE_SHIFT;
-	boot_mode =
-		((bootrom_device << BOOT_TYPE_SHIFT) & BOOT_TYPE_MASK) |
-		((bootrom_instance << BOOT_INSTANCE_SHIFT) &
-		 BOOT_INSTANCE_MASK);
-
-	/* save the boot mode in TAMP backup register */
-	clrsetbits_le32(TAMP_BOOT_CONTEXT,
-			TAMP_BOOT_MODE_MASK,
-			boot_mode << TAMP_BOOT_MODE_SHIFT);
-}
-
 u32 get_bootmode(void)
 {
 	/* read bootmode from TAMP backup register */
@@ -277,25 +100,24 @@ static void early_enable_caches(void)
  */
 int arch_cpu_init(void)
 {
-	u32 boot_mode;
-
 	early_enable_caches();
 
 	/* early armv7 timer init: needed for polling */
 	timer_init();
 
-	if (IS_ENABLED(CONFIG_SPL_BUILD)) {
-		security_init();
-		update_bootmode();
-	}
-/* reset copro state in SPL, when used, or in U-Boot */
-	if (!IS_ENABLED(CONFIG_SPL) || IS_ENABLED(CONFIG_SPL_BUILD)) {
-		/* Reset Coprocessor state unless it wakes up from Standby power mode */
-		if (!(readl(PWR_MCUCR) & PWR_MCUCR_SBF)) {
-			writel(TAMP_COPRO_STATE_OFF, TAMP_COPRO_STATE);
-			writel(0, TAMP_COPRO_RSC_TBL_ADDRESS);
-		}
-	}
+	return 0;
+}
+
+/* weak function for SOC specific initialization */
+__weak void stm32mp_cpu_init(void)
+{
+}
+
+int mach_cpu_init(void)
+{
+	u32 boot_mode;
+
+	stm32mp_cpu_init();
 
 	boot_mode = get_bootmode();
 
@@ -324,122 +146,6 @@ void enable_caches(void)
 	dcache_enable();
 }
 
-static u32 read_idc(void)
-{
-	/* DBGMCU access is controlled by BSEC_DENABLE.DBGSWENABLE */
-	if (bsec_dbgswenable()) {
-		setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);
-
-		return readl(DBGMCU_IDC);
-	}
-
-	if (CONFIG_IS_ENABLED(STM32MP15x))
-		return CPU_DEV_STM32MP15; /* STM32MP15x and unknown revision */
-	else
-		return 0x0;
-}
-
-u32 get_cpu_dev(void)
-{
-	return (read_idc() & DBGMCU_IDC_DEV_ID_MASK) >> DBGMCU_IDC_DEV_ID_SHIFT;
-}
-
-u32 get_cpu_rev(void)
-{
-	return (read_idc() & DBGMCU_IDC_REV_ID_MASK) >> DBGMCU_IDC_REV_ID_SHIFT;
-}
-
-/* Get Device Part Number (RPN) from OTP */
-static u32 get_cpu_rpn(void)
-{
-	return get_otp(BSEC_OTP_RPN, RPN_SHIFT, RPN_MASK);
-}
-
-u32 get_cpu_type(void)
-{
-	return (get_cpu_dev() << 16) | get_cpu_rpn();
-}
-
-/* Get Package options from OTP */
-u32 get_cpu_package(void)
-{
-	return get_otp(BSEC_OTP_PKG, PKG_SHIFT, PKG_MASK);
-}
-
-static const char * const soc_type[] = {
-	"????",
-	"151C", "151A", "151F", "151D",
-	"153C", "153A", "153F", "153D",
-	"157C", "157A", "157F", "157D"
-};
-
-static const char * const soc_pkg[] = { "??", "AD", "AC", "AB", "AA" };
-static const char * const soc_rev[] = { "?", "A", "B", "Z" };
-
-static void get_cpu_string_offsets(unsigned int *type, unsigned int *pkg,
-				   unsigned int *rev)
-{
-	u32 cpu_type = get_cpu_type();
-	u32 ct = cpu_type & ~(BIT(7) | BIT(0));
-	u32 cm = ((cpu_type & BIT(7)) >> 6) | (cpu_type & BIT(0));
-	u32 cp = get_cpu_package();
-
-	/* Bits 0 and 7 are the ACDF, 00:C 01:A 10:F 11:D */
-	switch (ct) {
-	case CPU_STM32MP151Cxx:
-		*type = cm + 1;
-		break;
-	case CPU_STM32MP153Cxx:
-		*type = cm + 5;
-		break;
-	case CPU_STM32MP157Cxx:
-		*type = cm + 9;
-		break;
-	default:
-		*type = 0;
-		break;
-	}
-
-	/* Package */
-	switch (cp) {
-	case PKG_AA_LBGA448:
-	case PKG_AB_LBGA354:
-	case PKG_AC_TFBGA361:
-	case PKG_AD_TFBGA257:
-		*pkg = cp;
-		break;
-	default:
-		*pkg = 0;
-		break;
-	}
-
-	/* Revision */
-	switch (get_cpu_rev()) {
-	case CPU_REV1:
-		*rev = 1;
-		break;
-	case CPU_REV2:
-		*rev = 2;
-		break;
-	case CPU_REV2_1:
-		*rev = 3;
-		break;
-	default:
-		*rev = 0;
-		break;
-	}
-}
-
-void get_soc_name(char name[SOC_NAME_SIZE])
-{
-	unsigned int type, pkg, rev;
-
-	get_cpu_string_offsets(&type, &pkg, &rev);
-
-	snprintf(name, SOC_NAME_SIZE, "STM32MP%s%s Rev.%s",
-		 soc_type[type], soc_pkg[pkg], soc_rev[rev]);
-}
-
 /* used when CONFIG_DISPLAY_CPUINFO is activated */
 int print_cpuinfo(void)
 {
@@ -645,15 +351,8 @@ static int setup_serial_number(void)
 	return 0;
 }
 
-static void setup_soc_type_pkg_rev(void)
+__weak void stm32mp_misc_init(void)
 {
-	unsigned int type, pkg, rev;
-
-	get_cpu_string_offsets(&type, &pkg, &rev);
-
-	env_set("soc_type", soc_type[type]);
-	env_set("soc_pkg", soc_pkg[pkg]);
-	env_set("soc_rev", soc_rev[rev]);
 }
 
 int arch_misc_init(void)
@@ -661,7 +360,7 @@ int arch_misc_init(void)
 	setup_boot_mode();
 	setup_mac_address();
 	setup_serial_number();
-	setup_soc_type_pkg_rev();
+	stm32mp_misc_init();
 
 	return 0;
 }
diff --git a/arch/arm/mach-stm32mp/fdt.c b/arch/arm/mach-stm32mp/fdt.c
index b1a4b76566..7412f0e029 100644
--- a/arch/arm/mach-stm32mp/fdt.c
+++ b/arch/arm/mach-stm32mp/fdt.c
@@ -312,16 +312,16 @@ int ft_system_setup(void *blob, struct bd_info *bd)
 	}
 
 	switch (get_cpu_package()) {
-	case PKG_AA_LBGA448:
+	case STM32MP15_PKG_AA_LBGA448:
 		pkg = STM32MP_PKG_AA;
 		break;
-	case PKG_AB_LBGA354:
+	case STM32MP15_PKG_AB_LBGA354:
 		pkg = STM32MP_PKG_AB;
 		break;
-	case PKG_AC_TFBGA361:
+	case STM32MP15_PKG_AC_TFBGA361:
 		pkg = STM32MP_PKG_AC;
 		break;
-	case PKG_AD_TFBGA257:
+	case STM32MP15_PKG_AD_TFBGA257:
 		pkg = STM32MP_PKG_AD;
 		break;
 	default:
diff --git a/arch/arm/mach-stm32mp/include/mach/sys_proto.h b/arch/arm/mach-stm32mp/include/mach/sys_proto.h
index dc98f0c5a4..8b61135aeb 100644
--- a/arch/arm/mach-stm32mp/include/mach/sys_proto.h
+++ b/arch/arm/mach-stm32mp/include/mach/sys_proto.h
@@ -36,10 +36,12 @@ u32 get_cpu_rev(void);
 /* Get Package options from OTP */
 u32 get_cpu_package(void);
 
-#define PKG_AA_LBGA448	4
-#define PKG_AB_LBGA354	3
-#define PKG_AC_TFBGA361	2
-#define PKG_AD_TFBGA257	1
+/* package used for STM32MP15x */
+#define STM32MP15_PKG_AA_LBGA448	4
+#define STM32MP15_PKG_AB_LBGA354	3
+#define STM32MP15_PKG_AC_TFBGA361	2
+#define STM32MP15_PKG_AD_TFBGA257	1
+#define STM32MP15_PKG_UNKNOWN		0
 
 /* Get SOC name */
 #define SOC_NAME_SIZE 20
@@ -53,5 +55,9 @@ int setup_mac_address(void);
 /* board power management : configure vddcore according OPP */
 void board_vddcore_init(u32 voltage_mv);
 
+/* weak function */
+void stm32mp_cpu_init(void);
+void stm32mp_misc_init(void);
+
 /* helper function: read data from OTP */
 u32 get_otp(int index, int shift, int mask);
diff --git a/arch/arm/mach-stm32mp/spl.c b/arch/arm/mach-stm32mp/spl.c
index 78fa9d7edd..19d9fe04e0 100644
--- a/arch/arm/mach-stm32mp/spl.c
+++ b/arch/arm/mach-stm32mp/spl.c
@@ -190,6 +190,7 @@ void board_init_f(ulong dummy)
 	int ret;
 
 	arch_cpu_init();
+	mach_cpu_init();
 
 	ret = spl_early_init();
 	if (ret) {
diff --git a/arch/arm/mach-stm32mp/stm32mp15x.c b/arch/arm/mach-stm32mp/stm32mp15x.c
new file mode 100644
index 0000000000..800fad2f43
--- /dev/null
+++ b/arch/arm/mach-stm32mp/stm32mp15x.c
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause
+/*
+ * Copyright (C) 2021, STMicroelectronics - All Rights Reserved
+ */
+
+#define LOG_CATEGORY LOGC_ARCH
+
+#include <common.h>
+#include <env.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/bsec.h>
+#include <asm/arch/stm32.h>
+#include <asm/arch/sys_proto.h>
+#include <dm/device.h>
+#include <dm/uclass.h>
+
+/* RCC register */
+#define RCC_TZCR		(STM32_RCC_BASE + 0x00)
+#define RCC_BDCR		(STM32_RCC_BASE + 0x0140)
+#define RCC_MP_APB5ENSETR	(STM32_RCC_BASE + 0x0208)
+#define RCC_MP_AHB5ENSETR	(STM32_RCC_BASE + 0x0210)
+#define RCC_DBGCFGR		(STM32_RCC_BASE + 0x080C)
+
+#define RCC_BDCR_VSWRST		BIT(31)
+#define RCC_BDCR_RTCSRC		GENMASK(17, 16)
+
+#define RCC_DBGCFGR_DBGCKEN	BIT(8)
+
+/* DBGMCU register */
+#define DBGMCU_IDC		(STM32_DBGMCU_BASE + 0x00)
+#define DBGMCU_APB4FZ1		(STM32_DBGMCU_BASE + 0x2C)
+#define DBGMCU_APB4FZ1_IWDG2	BIT(2)
+
+/* Security register */
+#define ETZPC_TZMA1_SIZE	(STM32_ETZPC_BASE + 0x04)
+#define ETZPC_DECPROT0		(STM32_ETZPC_BASE + 0x10)
+
+#define TZC_GATE_KEEPER		(STM32_TZC_BASE + 0x008)
+#define TZC_REGION_ATTRIBUTE0	(STM32_TZC_BASE + 0x110)
+#define TZC_REGION_ID_ACCESS0	(STM32_TZC_BASE + 0x114)
+
+#define TAMP_CR1		(STM32_TAMP_BASE + 0x00)
+
+#define PWR_CR1			(STM32_PWR_BASE + 0x00)
+#define PWR_MCUCR		(STM32_PWR_BASE + 0x14)
+#define PWR_CR1_DBP		BIT(8)
+#define PWR_MCUCR_SBF		BIT(6)
+
+/* GPIOZ registers */
+#define GPIOZ_SECCFGR		0x54004030
+
+/* DBGMCU register */
+#define DBGMCU_IDC		(STM32_DBGMCU_BASE + 0x00)
+#define DBGMCU_IDC_DEV_ID_MASK	GENMASK(11, 0)
+#define DBGMCU_IDC_DEV_ID_SHIFT	0
+#define DBGMCU_IDC_REV_ID_MASK	GENMASK(31, 16)
+#define DBGMCU_IDC_REV_ID_SHIFT	16
+
+/* boot interface from Bootrom
+ * - boot instance = bit 31:16
+ * - boot device = bit 15:0
+ */
+#define BOOTROM_PARAM_ADDR	0x2FFC0078
+#define BOOTROM_MODE_MASK	GENMASK(15, 0)
+#define BOOTROM_MODE_SHIFT	0
+#define BOOTROM_INSTANCE_MASK	 GENMASK(31, 16)
+#define BOOTROM_INSTANCE_SHIFT	16
+
+/* Device Part Number (RPN) = OTP_DATA1 lower 8 bits */
+#define RPN_SHIFT	0
+#define RPN_MASK	GENMASK(7, 0)
+
+/* Package = bit 27:29 of OTP16 => STM32MP15_PKG defines
+ * - 100: LBGA448 (FFI) => AA = LFBGA 18x18mm 448 balls p. 0.8mm
+ * - 011: LBGA354 (LCI) => AB = LFBGA 16x16mm 359 balls p. 0.8mm
+ * - 010: TFBGA361 (FFC) => AC = TFBGA 12x12mm 361 balls p. 0.5mm
+ * - 001: TFBGA257 (LCC) => AD = TFBGA 10x10mm 257 balls p. 0.5mm
+ * - others: Reserved
+ */
+#define PKG_SHIFT	27
+#define PKG_MASK	GENMASK(2, 0)
+
+static void security_init(void)
+{
+	/* Disable the backup domain write protection */
+	/* the protection is enable at each reset by hardware */
+	/* And must be disable by software */
+	setbits_le32(PWR_CR1, PWR_CR1_DBP);
+
+	while (!(readl(PWR_CR1) & PWR_CR1_DBP))
+		;
+
+	/* If RTC clock isn't enable so this is a cold boot then we need
+	 * to reset the backup domain
+	 */
+	if (!(readl(RCC_BDCR) & RCC_BDCR_RTCSRC)) {
+		setbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
+		while (!(readl(RCC_BDCR) & RCC_BDCR_VSWRST))
+			;
+		clrbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
+	}
+
+	/* allow non secure access in Write/Read for all peripheral */
+	writel(GENMASK(25, 0), ETZPC_DECPROT0);
+
+	/* Open SYSRAM for no secure access */
+	writel(0x0, ETZPC_TZMA1_SIZE);
+
+	/* enable TZC1 TZC2 clock */
+	writel(BIT(11) | BIT(12), RCC_MP_APB5ENSETR);
+
+	/* Region 0 set to no access by default */
+	/* bit 0 / 16 => nsaid0 read/write Enable
+	 * bit 1 / 17 => nsaid1 read/write Enable
+	 * ...
+	 * bit 15 / 31 => nsaid15 read/write Enable
+	 */
+	writel(0xFFFFFFFF, TZC_REGION_ID_ACCESS0);
+	/* bit 30 / 31 => Secure Global Enable : write/read */
+	/* bit 0 / 1 => Region Enable for filter 0/1 */
+	writel(BIT(0) | BIT(1) | BIT(30) | BIT(31), TZC_REGION_ATTRIBUTE0);
+
+	/* Enable Filter 0 and 1 */
+	setbits_le32(TZC_GATE_KEEPER, BIT(0) | BIT(1));
+
+	/* RCC trust zone deactivated */
+	writel(0x0, RCC_TZCR);
+
+	/* TAMP: deactivate the internal tamper
+	 * Bit 23 ITAMP8E: monotonic counter overflow
+	 * Bit 20 ITAMP5E: RTC calendar overflow
+	 * Bit 19 ITAMP4E: HSE monitoring
+	 * Bit 18 ITAMP3E: LSE monitoring
+	 * Bit 16 ITAMP1E: RTC power domain supply monitoring
+	 */
+	writel(0x0, TAMP_CR1);
+
+	/* GPIOZ: deactivate the security */
+	writel(BIT(0), RCC_MP_AHB5ENSETR);
+	writel(0x0, GPIOZ_SECCFGR);
+}
+
+/*
+ * Debug init
+ */
+void dbgmcu_init(void)
+{
+	/*
+	 * Freeze IWDG2 if Cortex-A7 is in debug mode
+	 * done in TF-A for TRUSTED boot and
+	 * DBGMCU access is controlled by BSEC_DENABLE.DBGSWENABLE
+	 */
+	if (bsec_dbgswenable()) {
+		setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);
+		setbits_le32(DBGMCU_APB4FZ1, DBGMCU_APB4FZ1_IWDG2);
+	}
+}
+
+void spl_board_init(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	dbgmcu_init();
+
+	/* force probe of BSEC driver to shadow the upper OTP */
+	ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(stm32mp_bsec), &dev);
+	if (ret)
+		log_warning("BSEC probe failed: %d\n", ret);
+}
+
+/* get bootmode from ROM code boot context: saved in TAMP register */
+static void update_bootmode(void)
+{
+	u32 boot_mode;
+	u32 bootrom_itf = readl(BOOTROM_PARAM_ADDR);
+	u32 bootrom_device, bootrom_instance;
+
+	/* enable TAMP clock = RTCAPBEN */
+	writel(BIT(8), RCC_MP_APB5ENSETR);
+
+	/* read bootrom context */
+	bootrom_device =
+		(bootrom_itf & BOOTROM_MODE_MASK) >> BOOTROM_MODE_SHIFT;
+	bootrom_instance =
+		(bootrom_itf & BOOTROM_INSTANCE_MASK) >> BOOTROM_INSTANCE_SHIFT;
+	boot_mode =
+		((bootrom_device << BOOT_TYPE_SHIFT) & BOOT_TYPE_MASK) |
+		((bootrom_instance << BOOT_INSTANCE_SHIFT) &
+		 BOOT_INSTANCE_MASK);
+
+	/* save the boot mode in TAMP backup register */
+	clrsetbits_le32(TAMP_BOOT_CONTEXT,
+			TAMP_BOOT_MODE_MASK,
+			boot_mode << TAMP_BOOT_MODE_SHIFT);
+}
+
+/* weak function: STM32MP15x mach init for boot without TFA */
+void stm32mp_cpu_init(void)
+{
+	if (IS_ENABLED(CONFIG_SPL_BUILD)) {
+		security_init();
+		update_bootmode();
+	}
+
+	/* reset copro state in SPL, when used, or in U-Boot */
+	if (!IS_ENABLED(CONFIG_SPL) || IS_ENABLED(CONFIG_SPL_BUILD)) {
+		/* Reset Coprocessor state unless it wakes up from Standby power mode */
+		if (!(readl(PWR_MCUCR) & PWR_MCUCR_SBF)) {
+			writel(TAMP_COPRO_STATE_OFF, TAMP_COPRO_STATE);
+			writel(0, TAMP_COPRO_RSC_TBL_ADDRESS);
+		}
+	}
+}
+
+static u32 read_idc(void)
+{
+	/* DBGMCU access is controlled by BSEC_DENABLE.DBGSWENABLE */
+	if (bsec_dbgswenable()) {
+		setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);
+
+		return readl(DBGMCU_IDC);
+	}
+
+	return CPU_DEV_STM32MP15; /* STM32MP15x and unknown revision */
+}
+
+u32 get_cpu_dev(void)
+{
+	return (read_idc() & DBGMCU_IDC_DEV_ID_MASK) >> DBGMCU_IDC_DEV_ID_SHIFT;
+}
+
+u32 get_cpu_rev(void)
+{
+	return (read_idc() & DBGMCU_IDC_REV_ID_MASK) >> DBGMCU_IDC_REV_ID_SHIFT;
+}
+
+/* Get Device Part Number (RPN) from OTP */
+static u32 get_cpu_rpn(void)
+{
+	return get_otp(BSEC_OTP_RPN, RPN_SHIFT, RPN_MASK);
+}
+
+u32 get_cpu_type(void)
+{
+	return (get_cpu_dev() << 16) | get_cpu_rpn();
+}
+
+/* Get Package options from OTP */
+u32 get_cpu_package(void)
+{
+	return get_otp(BSEC_OTP_PKG, PKG_SHIFT, PKG_MASK);
+}
+
+static const char * const soc_type[] = {
+	"????",
+	"151C", "151A", "151F", "151D",
+	"153C", "153A", "153F", "153D",
+	"157C", "157A", "157F", "157D"
+};
+
+static const char * const soc_pkg[] = { "??", "AD", "AC", "AB", "AA" };
+static const char * const soc_rev[] = { "?", "A", "B", "Z" };
+
+static void get_cpu_string_offsets(unsigned int *type, unsigned int *pkg,
+				   unsigned int *rev)
+{
+	u32 cpu_type = get_cpu_type();
+	u32 ct = cpu_type & ~(BIT(7) | BIT(0));
+	u32 cm = ((cpu_type & BIT(7)) >> 6) | (cpu_type & BIT(0));
+	u32 cp = get_cpu_package();
+
+	/* Bits 0 and 7 are the ACDF, 00:C 01:A 10:F 11:D */
+	switch (ct) {
+	case CPU_STM32MP151Cxx:
+		*type = cm + 1;
+		break;
+	case CPU_STM32MP153Cxx:
+		*type = cm + 5;
+		break;
+	case CPU_STM32MP157Cxx:
+		*type = cm + 9;
+		break;
+	default:
+		*type = 0;
+		break;
+	}
+
+	/* Package */
+	switch (cp) {
+	case STM32MP15_PKG_AA_LBGA448:
+	case STM32MP15_PKG_AB_LBGA354:
+	case STM32MP15_PKG_AC_TFBGA361:
+	case STM32MP15_PKG_AD_TFBGA257:
+		*pkg = cp;
+		break;
+	default:
+		*pkg = 0;
+		break;
+	}
+
+	/* Revision */
+	switch (get_cpu_rev()) {
+	case CPU_REV1:
+		*rev = 1;
+		break;
+	case CPU_REV2:
+		*rev = 2;
+		break;
+	case CPU_REV2_1:
+		*rev = 3;
+		break;
+	default:
+		*rev = 0;
+		break;
+	}
+}
+
+void get_soc_name(char name[SOC_NAME_SIZE])
+{
+	unsigned int type, pkg, rev;
+
+	get_cpu_string_offsets(&type, &pkg, &rev);
+
+	snprintf(name, SOC_NAME_SIZE, "STM32MP%s%s Rev.%s",
+		 soc_type[type], soc_pkg[pkg], soc_rev[rev]);
+}
+
+static void setup_soc_type_pkg_rev(void)
+{
+	unsigned int type, pkg, rev;
+
+	get_cpu_string_offsets(&type, &pkg, &rev);
+
+	env_set("soc_type", soc_type[type]);
+	env_set("soc_pkg", soc_pkg[pkg]);
+	env_set("soc_rev", soc_rev[rev]);
+}
+
+/* weak function called in arch_misc_init */
+void stm32mp_misc_init(void)
+{
+	setup_soc_type_pkg_rev();
+}