Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm: (167 commits)
  OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer
  ARM: omap3: Add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_MMC_SUPPORT
  ARM: omap3: Set SPL stack size to 8KB, image to 54KB.
  arm, omap3: fix warm reset serial output on OMAP36xx/AM/DM37xx
  OMAP4: Set fdt_high for OMAP4 devices to enable booting with Device Tree
  omap4: do not enable auxiliary cores
  omap4: do not enable fs-usb module
  omap4: panda: disable uart2 pads during boot
  igep00x0: change mpurate from 500 to auto
  igep00x0: enable the use of a plain text file
  tegra2: trivially enable 13 mhz crystal frequency
  tegra: Enable keyboard for Seaboard
  tegra: Switch on console mux and use environment for console
  tegra: Add tegra keyboard driver
  tegra: fdt: Add keyboard definitions for Seaboard
  tegra: fdt: Add keyboard controller definition
  tegra: Add keyboard support to funcmux
  input: Add support for keyboard matrix decoding from an fdt
  input: Add generic keyboard input handler
  input: Add linux/input.h for key code support
  fdt: Add fdtdec functions to read byte array
  tegra: Enable LP0 on Seaboard
  tegra: fdt: Add EMC data for Tegra2 Seaboard
  tegra: i2c: Add function to find DVC bus
  fdt: tegra: Add EMC node to device tree
  tegra: Add EMC settings for Seaboard
  tegra: Turn off power detect in board init
  tegra: Set up warmboot code on Nvidia boards
  tegra: Setup PMC scratch info from ap20 setup
  tegra: Add warmboot implementation
  tegra: Set up PMU for Nvidia boards
  tegra: Add PMU to manage power supplies
  tegra: Add EMC support for optimal memory timings
  tegra: Add header file for APB_MISC register
  tegra: Add tegra_get_chip_type() to detect SKU
  tegra: Add flow, gp_padctl, fuse, sdram headers
  tegra: Add crypto library for warmboot code
  tegra: Add functions to access low-level Osc/PLL details
  tegra: Move ap20.h header into arch location
  Add AES crypto library
  i2c: Add TPS6586X driver
  Add abs() macro to return absolute value
  fdt: Add function to return next compatible subnode
  fdt: Add function to locate an array in the device tree
  i.MX28: Avoid redefining serial_put[cs]()
  i.MX28: Check if WP detection is implemented at all
  i.MX28: Add battery boot components to SPL
  i.MX28: Reorder battery status functions in SPL
  i.MX28: Add LRADC init to i.MX28 SPL
  i.MX28: Add LRADC register definitions
  i.MX28: Shut down the LCD controller before reset
  i.MX28: Add LCDIF register definitions
  i.MX28: Implement boot pads sampling and reporting
  i.MX28: Improve passing of data from SPL to U-Boot
  M28EVK: Add SD update command
  M28EVK: Implement support for new board V2.0
  FEC: Abstract out register setup
  MX5: PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH exchanged
  i.MX28: Add delay after CPU bypass is cleared
  spi: mxs: Allow other chip selects to work
  spi: mxs: Introduce spi_cs_is_valid()
  mx53loco: Remove unneeded gpio_set_value()
  mx53loco: Add CONFIG_REVISION_TAG
  mx53loco: Turn on VUSB regulator
  mx53loco: Add mc34708 support and set mx53 frequency at 1GHz
  pmic: dialog: Avoid name conflicts
  imx: Add u-boot.imx as target for ARM9 i.MX SOCs
  i.MX2: Include asm/types.h in arch-mx25/imx-regs.h
  imx: usb: There is no such register
  i.MX25: usb: Set PORTSCx register
  imx: nand: Support flash based BBT
  i.MX25: This architecture has a GPIO4 too
  i.MX25: esdhc: Add mxc_get_clock infrastructure
  i.MX6: mx6q_sabrelite: add SATA bindings
  i.MX6: add enable_sata_clock()
  i.MX6: Add ANATOP regulator init
  mx28evk: add NAND support
  USB: ehci-mx6: Fix broken IO access
  M28: Scan only first 512 MB of DRAM to avoid memory wraparound
  Revert "i.MX28: Enable additional DRAM address bits"
  M28: Enable FDT support
  mx53loco: Add support for 1GHz operation for DA9053-based boards
  mx53loco: Allow to print CPU information at a later stage
  mx5: Add clock config interface
  imx-common: Factor out get_ahb_clk()
  i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow
  mx31pdk: Allow booting a zImage kernel
  mx6qarm2: Allow booting a zImage kernel
  mx6qsabrelite: Allow booting a zImage kernel
  mx28evk: Allow booting a zImage kernel
  m28evk: Allow to booting a dt kernel
  mx28evk: Allow to booting a dt kernel
  mx6qsabrelite: No need to set the direction for GPIO3_23 again
  pmic: Add support for the Dialog DA9053 PMIC
  MX53: mx53loco: Add SATA support
  MX53: Add support to ESG ima3 board
  SATA: add driver for MX5 / MX6 SOCs
  MX53: add function to set SATA clock to internal
  SATA: check for return value from sata functions
  MX5: Add definitions for SATA controller
  NET: fec_mxc.c: Add a way to disable auto negotiation
  Define UART4 and UART5 base addresses
  EXYNOS: Change bits per pixel value proper for u-boot.
  EXYNOS: support TRATS board display function
  LCD: support S6E8AX0 amoled driver based on EXYNOS MIPI DSI
  EXYNOS: support EXYNOS MIPI DSI interface driver.
  EXYNOS: support EXYNOS framebuffer and FIMD display drivers.
  LCD: add data structure for EXYNOS display driver
  EXYNOS: add LCD and MIPI DSI clock interface.
  EXYNOS: definitions of system resgister and power management registers.
  SMDK5250: fix compiler warning
  misc:pmic:samsung Convert TRATS target to use MAX8997 instead of MAX8998
  misc:pmic:max8997 MAX8997 support for PMIC driver
  TRATS: modify the trats's configuration
  ARM: Exynos4: ADC: Universal_C210: Enable LDO4 power line for ADC measurement
  EXYNOS: Rename exynos5_tzpc structure to exynos_tzpc
  arm: ea20: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT
  arm: cam_enc_4xx: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT
  cm-t35: add I2C multi-bus support
  include/configs: Remove CONFIG_SYS_64BIT_STRTOUL
  include/configs: Remove CONFIG_SYS_64BIT_VSPRINTF
  omap3: Introduce weak misc_init_r
  omap730p2: Remove empty misc_init_r
  omap5912osk: Remove empty misc_init_r
  omap4+: Remove CONFIG_ARCH_CPU_INIT
  omap4: Remove CONFIG_SYS_MMC_SET_DEV
  OMAP3: pandora: drop console kernel argument
  OMAP3: pandora: revise GPIO configuration
  ...

1 files changed, 212 insertions, 0 deletions

diff --git a/arch/arm/include/asm/arch-mx28/regs-lcdif.h b/arch/arm/include/asm/arch-mx28/regs-lcdif.h
new file mode 100644
index 00000000000..cb47e41fdc2
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-lcdif.h
@@ -0,0 +1,212 @@
+/*
+ * Freescale i.MX28 LCDIF Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_LCDIF_H__
+#define __MX28_REGS_LCDIF_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef	__ASSEMBLY__
+struct mx28_lcdif_regs {
+	mx28_reg_32(hw_lcdif_ctrl)		/* 0x00 */
+	mx28_reg_32(hw_lcdif_ctrl1)		/* 0x10 */
+	mx28_reg_32(hw_lcdif_ctrl2)		/* 0x20 */
+	mx28_reg_32(hw_lcdif_transfer_count)	/* 0x30 */
+	mx28_reg_32(hw_lcdif_cur_buf)		/* 0x40 */
+	mx28_reg_32(hw_lcdif_next_buf)		/* 0x50 */
+	mx28_reg_32(hw_lcdif_timing)		/* 0x60 */
+	mx28_reg_32(hw_lcdif_vdctrl0)		/* 0x70 */
+	mx28_reg_32(hw_lcdif_vdctrl1)		/* 0x80 */
+	mx28_reg_32(hw_lcdif_vdctrl2)		/* 0x90 */
+	mx28_reg_32(hw_lcdif_vdctrl3)		/* 0xa0 */
+	mx28_reg_32(hw_lcdif_vdctrl4)		/* 0xb0 */
+	mx28_reg_32(hw_lcdif_dvictrl0)		/* 0xc0 */
+	mx28_reg_32(hw_lcdif_dvictrl1)		/* 0xd0 */
+	mx28_reg_32(hw_lcdif_dvictrl2)		/* 0xe0 */
+	mx28_reg_32(hw_lcdif_dvictrl3)		/* 0xf0 */
+	mx28_reg_32(hw_lcdif_dvictrl4)		/* 0x100 */
+	mx28_reg_32(hw_lcdif_csc_coeffctrl0)	/* 0x110 */
+	mx28_reg_32(hw_lcdif_csc_coeffctrl1)	/* 0x120 */
+	mx28_reg_32(hw_lcdif_csc_coeffctrl2)	/* 0x130 */
+	mx28_reg_32(hw_lcdif_csc_coeffctrl3)	/* 0x140 */
+	mx28_reg_32(hw_lcdif_csc_coeffctrl4)	/* 0x150 */
+	mx28_reg_32(hw_lcdif_csc_offset)	/* 0x160 */
+	mx28_reg_32(hw_lcdif_csc_limit)		/* 0x170 */
+	mx28_reg_32(hw_lcdif_data)		/* 0x180 */
+	mx28_reg_32(hw_lcdif_bm_error_stat)	/* 0x190 */
+	mx28_reg_32(hw_lcdif_crc_stat)		/* 0x1a0 */
+	mx28_reg_32(hw_lcdif_lcdif_stat)	/* 0x1b0 */
+	mx28_reg_32(hw_lcdif_version)		/* 0x1c0 */
+	mx28_reg_32(hw_lcdif_debug0)		/* 0x1d0 */
+	mx28_reg_32(hw_lcdif_debug1)		/* 0x1e0 */
+	mx28_reg_32(hw_lcdif_debug2)		/* 0x1f0 */
+};
+#endif
+
+#define	LCDIF_CTRL_SFTRST					(1 << 31)
+#define	LCDIF_CTRL_CLKGATE					(1 << 30)
+#define	LCDIF_CTRL_YCBCR422_INPUT				(1 << 29)
+#define	LCDIF_CTRL_READ_WRITEB					(1 << 28)
+#define	LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE				(1 << 27)
+#define	LCDIF_CTRL_DATA_SHIFT_DIR				(1 << 26)
+#define	LCDIF_CTRL_SHIFT_NUM_BITS_MASK				(0x1f << 21)
+#define	LCDIF_CTRL_SHIFT_NUM_BITS_OFFSET			21
+#define	LCDIF_CTRL_DVI_MODE					(1 << 20)
+#define	LCDIF_CTRL_BYPASS_COUNT					(1 << 19)
+#define	LCDIF_CTRL_VSYNC_MODE					(1 << 18)
+#define	LCDIF_CTRL_DOTCLK_MODE					(1 << 17)
+#define	LCDIF_CTRL_DATA_SELECT					(1 << 16)
+#define	LCDIF_CTRL_INPUT_DATA_SWIZZLE_MASK			(0x3 << 14)
+#define	LCDIF_CTRL_INPUT_DATA_SWIZZLE_OFFSET			14
+#define	LCDIF_CTRL_CSC_DATA_SWIZZLE_MASK			(0x3 << 12)
+#define	LCDIF_CTRL_CSC_DATA_SWIZZLE_OFFSET			12
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_MASK			(0x3 << 10)
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_OFFSET			10
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_16BIT			(0 << 10)
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_8BIT			(1 << 10)
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_18BIT			(2 << 10)
+#define	LCDIF_CTRL_LCD_DATABUS_WIDTH_24BIT			(3 << 10)
+#define	LCDIF_CTRL_WORD_LENGTH_MASK				(0x3 << 8)
+#define	LCDIF_CTRL_WORD_LENGTH_OFFSET				8
+#define	LCDIF_CTRL_WORD_LENGTH_16BIT				(0 << 8)
+#define	LCDIF_CTRL_WORD_LENGTH_8BIT				(1 << 8)
+#define	LCDIF_CTRL_WORD_LENGTH_18BIT				(2 << 8)
+#define	LCDIF_CTRL_WORD_LENGTH_24BIT				(3 << 8)
+#define	LCDIF_CTRL_RGB_TO_YCBCR422_CSC				(1 << 7)
+#define	LCDIF_CTRL_LCDIF_MASTER					(1 << 5)
+#define	LCDIF_CTRL_DATA_FORMAT_16_BIT				(1 << 3)
+#define	LCDIF_CTRL_DATA_FORMAT_18_BIT				(1 << 2)
+#define	LCDIF_CTRL_DATA_FORMAT_24_BIT				(1 << 1)
+#define	LCDIF_CTRL_RUN						(1 << 0)
+
+#define	LCDIF_CTRL1_COMBINE_MPU_WR_STRB				(1 << 27)
+#define	LCDIF_CTRL1_BM_ERROR_IRQ_EN				(1 << 26)
+#define	LCDIF_CTRL1_BM_ERROR_IRQ				(1 << 25)
+#define	LCDIF_CTRL1_RECOVER_ON_UNDERFLOW			(1 << 24)
+#define	LCDIF_CTRL1_INTERLACE_FIELDS				(1 << 23)
+#define	LCDIF_CTRL1_START_INTERLACE_FROM_SECOND_FIELD		(1 << 22)
+#define	LCDIF_CTRL1_FIFO_CLEAR					(1 << 21)
+#define	LCDIF_CTRL1_IRQ_ON_ALTERNATE_FIELDS			(1 << 20)
+#define	LCDIF_CTRL1_BYTE_PACKING_FORMAT_MASK			(0xf << 16)
+#define	LCDIF_CTRL1_BYTE_PACKING_FORMAT_OFFSET			16
+#define	LCDIF_CTRL1_OVERFLOW_IRQ_EN				(1 << 15)
+#define	LCDIF_CTRL1_UNDERFLOW_IRQ_EN				(1 << 14)
+#define	LCDIF_CTRL1_CUR_FRAME_DONE_IRQ_EN			(1 << 13)
+#define	LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN				(1 << 12)
+#define	LCDIF_CTRL1_OVERFLOW_IRQ				(1 << 11)
+#define	LCDIF_CTRL1_UNDERFLOW_IRQ				(1 << 10)
+#define	LCDIF_CTRL1_CUR_FRAME_DONE_IRQ				(1 << 9)
+#define	LCDIF_CTRL1_VSYNC_EDGE_IRQ				(1 << 8)
+#define	LCDIF_CTRL1_BUSY_ENABLE					(1 << 2)
+#define	LCDIF_CTRL1_MODE86					(1 << 1)
+#define	LCDIF_CTRL1_RESET					(1 << 0)
+
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_MASK			(0x7 << 21)
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_OFFSET			21
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_REQ_1			(0x0 << 21)
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_REQ_2			(0x1 << 21)
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_REQ_4			(0x2 << 21)
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_REQ_8			(0x3 << 21)
+#define	LCDIF_CTRL2_OUTSTANDING_REQS_REQ_16			(0x4 << 21)
+#define	LCDIF_CTRL2_BURST_LEN_8					(1 << 20)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_MASK			(0x7 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_OFFSET			16
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_RGB			(0x0 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_RBG			(0x1 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_GBR			(0x2 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_GRB			(0x3 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_BRG			(0x4 << 16)
+#define	LCDIF_CTRL2_ODD_LINE_PATTERN_BGR			(0x5 << 16)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_MASK			(0x7 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_OFFSET			12
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_RGB			(0x0 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_RBG			(0x1 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_GBR			(0x2 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_GRB			(0x3 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_BRG			(0x4 << 12)
+#define	LCDIF_CTRL2_EVEN_LINE_PATTERN_BGR			(0x5 << 12)
+#define	LCDIF_CTRL2_READ_PACK_DIR				(1 << 10)
+#define	LCDIF_CTRL2_READ_MODE_OUTPUT_IN_RGB_FORMAT		(1 << 9)
+#define	LCDIF_CTRL2_READ_MODE_6_BIT_INPUT			(1 << 8)
+#define	LCDIF_CTRL2_READ_MODE_NUM_PACKED_SUBWORDS_MASK		(0x7 << 4)
+#define	LCDIF_CTRL2_READ_MODE_NUM_PACKED_SUBWORDS_OFFSET	4
+#define	LCDIF_CTRL2_INITIAL_DUMMY_READ_MASK			(0x7 << 1)
+#define	LCDIF_CTRL2_INITIAL_DUMMY_READ_OFFSET			1
+
+#define	LCDIF_TRANSFER_COUNT_V_COUNT_MASK			(0xffff << 16)
+#define	LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET			16
+#define	LCDIF_TRANSFER_COUNT_H_COUNT_MASK			(0xffff << 0)
+#define	LCDIF_TRANSFER_COUNT_H_COUNT_OFFSET			0
+
+#define	LCDIF_CUR_BUF_ADDR_MASK					0xffffffff
+#define	LCDIF_CUR_BUF_ADDR_OFFSET				0
+
+#define	LCDIF_NEXT_BUF_ADDR_MASK				0xffffffff
+#define	LCDIF_NEXT_BUF_ADDR_OFFSET				0
+
+#define	LCDIF_TIMING_CMD_HOLD_MASK				(0xff << 24)
+#define	LCDIF_TIMING_CMD_HOLD_OFFSET				24
+#define	LCDIF_TIMING_CMD_SETUP_MASK				(0xff << 16)
+#define	LCDIF_TIMING_CMD_SETUP_OFFSET				16
+#define	LCDIF_TIMING_DATA_HOLD_MASK				(0xff << 8)
+#define	LCDIF_TIMING_DATA_HOLD_OFFSET				8
+#define	LCDIF_TIMING_DATA_SETUP_MASK				(0xff << 0)
+#define	LCDIF_TIMING_DATA_SETUP_OFFSET				0
+
+#define	LCDIF_VDCTRL0_VSYNC_OEB					(1 << 29)
+#define	LCDIF_VDCTRL0_ENABLE_PRESENT				(1 << 28)
+#define	LCDIF_VDCTRL0_VSYNC_POL					(1 << 27)
+#define	LCDIF_VDCTRL0_HSYNC_POL					(1 << 26)
+#define	LCDIF_VDCTRL0_DOTCLK_POL				(1 << 25)
+#define	LCDIF_VDCTRL0_ENABLE_POL				(1 << 24)
+#define	LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT				(1 << 21)
+#define	LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT			(1 << 20)
+#define	LCDIF_VDCTRL0_HALF_LINE					(1 << 19)
+#define	LCDIF_VDCTRL0_HALF_LINE_MODE				(1 << 18)
+#define	LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_MASK			0x3ffff
+#define	LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_OFFSET			0
+
+#define	LCDIF_VDCTRL1_VSYNC_PERIOD_MASK				0xffffffff
+#define	LCDIF_VDCTRL1_VSYNC_PERIOD_OFFSET			0
+
+#define	LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_MASK			(0x3fff << 18)
+#define	LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET			18
+#define	LCDIF_VDCTRL2_HSYNC_PERIOD_MASK				0x3ffff
+#define	LCDIF_VDCTRL2_HSYNC_PERIOD_OFFSET			0
+
+#define	LCDIF_VDCTRL3_MUX_SYNC_SIGNALS				(1 << 29)
+#define	LCDIF_VDCTRL3_VSYNC_ONLY				(1 << 28)
+#define	LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT_MASK			(0xfff << 16)
+#define	LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT_OFFSET		16
+#define	LCDIF_VDCTRL3_VERTICAL_WAIT_CNT_MASK			(0xffff << 0)
+#define	LCDIF_VDCTRL3_VERTICAL_WAIT_CNT_OFFSET			0
+
+#define	LCDIF_VDCTRL4_DOTCLK_DLY_SEL_MASK			(0x7 << 29)
+#define	LCDIF_VDCTRL4_DOTCLK_DLY_SEL_OFFSET			29
+#define	LCDIF_VDCTRL4_SYNC_SIGNALS_ON				(1 << 18)
+#define	LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT_MASK		0x3ffff
+#define	LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT_OFFSET		0
+
+#endif /* __MX28_REGS_LCDIF_H__ */