diff options
| author | Samuel Holland <samuel@sholland.org> | 2022-04-27 15:31:23 -0500 |
|---|---|---|
| committer | Andre Przywara <andre.przywara@arm.com> | 2022-05-23 00:37:50 +0100 |
| commit | 0605ac405ce1a4cbc32bf8fd2e55b27988761cf1 (patch) | |
| tree | a5a646f1712d5de2dea978b45e7c1aab62f1bc06 /arch/arm/dts/sun7i-a20-olinuxino-lime.dts | |
| parent | 91407bbd41f88890ac1e3db17f693b81bc742f27 (diff) | |
ARM: dts: sun7i: Sync from Linux v5.18-rc1
Copy the devicetree source for the A20 SoC and all existing boards
verbatim from the Linux v5.18-rc1 tag.
This commit also adds the following new board devicetrees:
- sun7i-a20-haoyu-marsboard.dts
- sun7i-a20-linutronix-testbox-v2.dts
- sun7i-a20-olinuxino-lime-emmc.dts
This update includes changes to the USB PHY detection GPIO properties
which are needed to convert that driver to use the DM GPIO framework.
Signed-off-by: Samuel Holland <samuel@sholland.org>
[Andre: fix Mele M5 U-Boot only DT]
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Diffstat (limited to 'arch/arm/dts/sun7i-a20-olinuxino-lime.dts')
| -rw-r--r-- | arch/arm/dts/sun7i-a20-olinuxino-lime.dts | 32 |
1 files changed, 10 insertions, 22 deletions
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts index 5e411194bf..92938d0222 100644 --- a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts @@ -78,7 +78,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxinolime>; - green { + led { label = "a20-olinuxino-lime:green:usr"; gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -106,13 +106,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -149,6 +145,12 @@ }; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; @@ -174,18 +176,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; }; ®_ahci_5v { @@ -217,10 +207,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; |