diff options
| author | Jagan Teki <jagan@amarulasolutions.com> | 2018-08-05 00:40:10 +0530 |
|---|---|---|
| committer | Jagan Teki <jagan@amarulasolutions.com> | 2018-09-28 22:09:24 +0530 |
| commit | b9d59d08a6c7362a9558dd5f67cdf85cc3a1b7c8 (patch) | |
| tree | ff3c8e396bea36b755ec3ca7bc6eca9156568e58 /arch/arm/dts/sun7i-a20-olinuxino-lime.dts | |
| parent | d1d4295aab97306454254989c8080f5093360af4 (diff) | |
ARM: dts: sun7i: Update A20 dts(i) files from Linux-v4.18-rc3
Update all A10 devicetree dtsi and dtsi files from Linux-v4.18-rc3
with below commit:
commit 5d9ef839f874f4e3923c8a9ae7b136c6c3912cd5
Author: Stefan Mavrodiev <stefan@olimex.com>
Date: Wed May 16 14:38:08 2018 +0300
ARM: dts: sun7i: Add Olimex A20-SOM-EVB-eMMC board
Note:
- Update sun7i-a20-primo73.dts as per Linux, since
this dts is U-Boot specific.
- Drop sun7i-a20-olimex-som-evb-emmc.dts since no board
added for this.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Diffstat (limited to 'arch/arm/dts/sun7i-a20-olinuxino-lime.dts')
| -rw-r--r-- | arch/arm/dts/sun7i-a20-olinuxino-lime.dts | 58 |
1 files changed, 38 insertions, 20 deletions
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts index 35ad7006c53..d20fd03596e 100644 --- a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts @@ -49,7 +49,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A20-OLinuXino-LIME"; @@ -63,6 +62,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -81,6 +91,10 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -101,6 +115,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -131,11 +155,10 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; @@ -153,31 +176,26 @@ &pio { ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC3"; + function = "gpio_out"; }; led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; |