diff options
| author | Patrick Delaunay <patrick.delaunay@st.com> | 2019-01-30 13:07:05 +0100 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2019-02-09 07:50:57 -0500 |
| commit | e74b74c52876d776dda7a7ee5e2a8d555eaa5c4f (patch) | |
| tree | 960fda40cbbcddb03270d37572a4bfa42b13e71d /arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | |
| parent | 8d6310aa0ba2bee92e14c0702c5ceec64943383a (diff) | |
dts: stm32mp1: clock tree update
- Add st,digbypass on clk_hse node (needed for board rev.C)
- MLAHB/AHB max frequency increased from 200 to 209MHz, with:
- PLL3P set to 208.8MHz for MCU sub-system
- PLL3Q set to 24.57MHz for 48kHz SAI/SPI2S
- PLL3R set to 11.29MHz for 44.1kHz SAI/SPI2S
- PLL4P set to 99MHz for SDMMC and SPDIFRX
- PLL4Q set to 74.25MHz for EVAL board
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Diffstat (limited to 'arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi')
| -rw-r--r-- | arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 27 |
1 files changed, 15 insertions, 12 deletions
diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi index 4898483e1d..70bbf66704 100644 --- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi @@ -39,6 +39,10 @@ }; }; +&clk_hse { + st,digbypass; +}; + &uart4_pins_a { u-boot,dm-pre-reloc; pins1 { @@ -68,7 +72,6 @@ u-boot,dm-pre-reloc; }; -/* CLOCK init */ &rcc { st,clksrc = < CLK_MPU_PLL1P @@ -101,7 +104,7 @@ CLK_FMC_ACLK CLK_QSPI_ACLK CLK_ETH_DISABLED - CLK_SDMMC12_PLL3R + CLK_SDMMC12_PLL4P CLK_DSI_DSIPLL CLK_STGEN_HSE CLK_USBPHY_HSE @@ -110,7 +113,7 @@ CLK_SPI45_HSI CLK_SPI6_HSI CLK_I2C46_HSI - CLK_SDMMC3_PLL3R + CLK_SDMMC3_PLL4P CLK_USBO_USBPHY CLK_ADC_CKPER CLK_CEC_LSE @@ -121,17 +124,17 @@ CLK_UART35_HSI CLK_UART6_HSI CLK_UART78_HSI - CLK_SPDIF_PLL3Q + CLK_SPDIF_PLL4P CLK_FDCAN_PLL4Q CLK_SAI1_PLL3Q CLK_SAI2_PLL3Q CLK_SAI3_PLL3Q CLK_SAI4_PLL3Q - CLK_RNG1_CSI - CLK_RNG2_CSI + CLK_RNG1_LSI + CLK_RNG2_LSI CLK_LPTIM1_PCLK1 CLK_LPTIM23_PCLK3 - CLK_LPTIM45_PCLK3 + CLK_LPTIM45_LSE >; /* VCO = 1300.0 MHz => P = 650 (CPU) */ @@ -148,16 +151,16 @@ u-boot,dm-pre-reloc; }; - /* VCO = 786.4 MHz => P = 197, Q = 49, R = 98 */ + /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */ pll3: st,pll@2 { - cfg = < 2 97 3 15 7 PQR(1,1,1) >; - frac = < 0x9ba >; + cfg = < 1 33 1 16 36 PQR(1,1,1) >; + frac = < 0x1a04 >; u-boot,dm-pre-reloc; }; - /* VCO = 508.0 MHz => P = 56, Q = 56, R = 56 */ + /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */ pll4: st,pll@3 { - cfg = < 5 126 8 8 8 PQR(1,1,1) >; + cfg = < 3 98 5 7 7 PQR(1,1,1) >; u-boot,dm-pre-reloc; }; }; |