ARM: rmobile: Sync Gen3 DTS with Linux v4.17

Sync the DTs with Linux v4.17.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

1 files changed, 71 insertions, 14 deletions

diff --git a/arch/arm/dts/salvator-common.dtsi b/arch/arm/dts/salvator-common.dtsi
index 7b19549d38..a36e0ebca0 100644
--- a/arch/arm/dts/salvator-common.dtsi
+++ b/arch/arm/dts/salvator-common.dtsi
@@ -52,7 +52,7 @@
 		 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <11289600>;
+		clock-frequency = <12288000>;
 	};
 
 	backlight: backlight {
@@ -255,9 +255,8 @@
 &avb {
 	pinctrl-0 = <&avb_pins>;
 	pinctrl-names = "default";
-	renesas,no-ether-link;
 	phy-handle = <&phy0>;
-	reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	phy-mode = "rgmii-txid";
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
@@ -265,6 +264,7 @@
 		reg = <0>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -283,6 +283,7 @@
 };
 
 &ehci0 {
+	dr_mode = "otg";
 	status = "okay";
 };
 
@@ -295,6 +296,7 @@
 };
 
 &hsusb {
+	dr_mode = "otg";
 	status = "okay";
 };
 
@@ -337,6 +339,13 @@
 &i2c4 {
 	status = "okay";
 
+	pca9654: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	csa_vdd: adc@7c {
 		compatible = "maxim,max9611";
 		reg = <0x7c>;
@@ -354,9 +363,34 @@
 
 &i2c_dvfs {
 	status = "okay";
+
+	pmic: pmic@30 {
+		pinctrl-0 = <&irq0_pins>;
+		pinctrl-names = "default";
+
+		compatible = "rohm,bd9571mwv";
+		reg = <0x30>;
+		interrupt-parent = <&intc_ex>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		regulators {
+			dvfs: dvfs {
+				regulator-name = "dvfs";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1030000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &ohci0 {
+	dr_mode = "otg";
 	status = "okay";
 };
 
@@ -382,8 +416,7 @@
 
 	avb_pins: avb {
 		mux {
-			groups = "avb_link", "avb_phy_int", "avb_mdc",
-				 "avb_mii";
+			groups = "avb_link", "avb_mdc", "avb_mii";
 			function = "avb";
 		};
 
@@ -409,6 +442,11 @@
 		function = "i2c2";
 	};
 
+	irq0_pins: irq0 {
+		groups = "intc_ex_irq0";
+		function = "intc_ex";
+	};
+
 	pwm1_pins: pwm1 {
 		groups = "pwm1_a";
 		function = "pwm1";
@@ -497,6 +535,11 @@
 			bias-pull-down;
 		};
 	};
+
+	usb30_pins: usb30 {
+		groups = "usb30";
+		function = "usb30";
+	};
 };
 
 &pwm1 {
@@ -576,10 +619,7 @@
 	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 	bus-width = <4>;
 	sd-uhs-sdr50;
-	sd-uhs-sdr104;
 	status = "okay";
-
-	max-frequency = <208000000>;
 };
 
 &sdhi2 {
@@ -591,12 +631,10 @@
 	vmmc-supply = <&reg_3p3v>;
 	vqmmc-supply = <&reg_1p8v>;
 	bus-width = <8>;
-	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	non-removable;
+	fixed-emmc-driver-type = <1>;
 	status = "okay";
-
-	max-frequency = <200000000>;
 };
 
 &sdhi3 {
@@ -610,16 +648,17 @@
 	wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
 	bus-width = <4>;
 	sd-uhs-sdr50;
-	sd-uhs-sdr104;
 	status = "okay";
-
-	max-frequency = <208000000>;
 };
 
 &ssi1 {
 	shared-pin;
 };
 
+&usb_extal_clk {
+	clock-frequency = <50000000>;
+};
+
 &usb2_phy0 {
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";
@@ -635,11 +674,29 @@
 	status = "okay";
 };
 
+&usb3_peri0 {
+	phys = <&usb3_phy0>;
+	phy-names = "usb";
+
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3s0_clk {
+	clock-frequency = <100000000>;
+};
+
 &wdt0 {
 	timeout-sec = <60>;
 	status = "okay";
 };
 
 &xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };