diff options
| author | David Wu <david.wu@rock-chips.com> | 2018-01-13 14:04:11 +0800 |
|---|---|---|
| committer | Philipp Tomsich <philipp.tomsich@theobroma-systems.com> | 2018-01-28 17:12:38 +0100 |
| commit | c132f38d2428be792df64ab46415b74c929bc919 (patch) | |
| tree | 2394378edb3e41ab1a9e368a3d898bfaf4b03a95 /arch/arm/dts/rk3328-evb.dts | |
| parent | 832762c1450368bcb4d888550f4db9ab316f1e25 (diff) | |
rockchip: dts: rk3328-evb: Enable gmac2io for rk3328-evb
Add rk3328-evb gmac support.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Diffstat (limited to 'arch/arm/dts/rk3328-evb.dts')
| -rw-r--r-- | arch/arm/dts/rk3328-evb.dts | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/arch/arm/dts/rk3328-evb.dts b/arch/arm/dts/rk3328-evb.dts index 3dd9d81961..336c2d5353 100644 --- a/arch/arm/dts/rk3328-evb.dts +++ b/arch/arm/dts/rk3328-evb.dts @@ -15,6 +15,13 @@ stdout-path = &uart2; }; + gmac_clkin: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + vcc3v3_sdmmc: sdmmc-pwren { compatible = "regulator-fixed"; regulator-name = "vcc3v3"; @@ -40,6 +47,13 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; }; &saradc { @@ -74,6 +88,22 @@ status = "okay"; }; +&gmac2io { + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + clock_in_out = "input"; + snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmiim1_pins>; + tx_delay = <0x26>; + rx_delay = <0x11>; + status = "okay"; +}; + &usb_host0_ehci { status = "okay"; }; |