ARM: dts: sync Amlogic ARM64 DT from v6.2-rc1

This syncs the Amlogic G12A, G12B & SM1 base DT + the
Odroid Go Ultra DT from Linux v6.2-rc1 from commmit [1].

[1] 1b929c02afd3 ("Linux 6.2-rc1")

Link: https://lore.kernel.org/r/20230119-u-boot-odroid-go-ultra-v1-1-f96bab9db396@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

1 files changed, 111 insertions, 56 deletions

diff --git a/arch/arm/dts/meson-g12-common.dtsi b/arch/arm/dts/meson-g12-common.dtsi
index 00c6f53290d..9dbd50820b1 100644
--- a/arch/arm/dts/meson-g12-common.dtsi
+++ b/arch/arm/dts/meson-g12-common.dtsi
@@ -58,7 +58,7 @@
 		secure-monitor = <&sm>;
 	};
 
-	gpu_opp_table: gpu-opp-table {
+	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-124999998 {
@@ -107,6 +107,12 @@
 			no-map;
 		};
 
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
@@ -159,61 +165,6 @@
 			status = "disabled";
 		};
 
-		thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay = <1000>;
-				polling-delay-passive = <100>;
-				thermal-sensors = <&cpu_temp>;
-
-				trips {
-					cpu_passive: cpu-passive {
-						temperature = <85000>; /* millicelsius */
-						hysteresis = <2000>; /* millicelsius */
-						type = "passive";
-					};
-
-					cpu_hot: cpu-hot {
-						temperature = <95000>; /* millicelsius */
-						hysteresis = <2000>; /* millicelsius */
-						type = "hot";
-					};
-
-					cpu_critical: cpu-critical {
-						temperature = <110000>; /* millicelsius */
-						hysteresis = <2000>; /* millicelsius */
-						type = "critical";
-					};
-				};
-			};
-
-			ddr_thermal: ddr-thermal {
-				polling-delay = <1000>;
-				polling-delay-passive = <100>;
-				thermal-sensors = <&ddr_temp>;
-
-				trips {
-					ddr_passive: ddr-passive {
-						temperature = <85000>; /* millicelsius */
-						hysteresis = <2000>; /* millicelsius */
-						type = "passive";
-					};
-
-					ddr_critical: ddr-critical {
-						temperature = <110000>; /* millicelsius */
-						hysteresis = <2000>; /* millicelsius */
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map {
-						trip = <&ddr_passive>;
-						cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-					};
-				};
-			};
-		};
-
 		ethmac: ethernet@ff3f0000 {
 			compatible = "amlogic,meson-g12a-dwmac",
 				     "snps,dwmac-3.70a",
@@ -894,6 +845,22 @@
 						};
 					};
 
+					pwm_f_z_pins: pwm-f-z {
+						mux {
+							groups = "pwm_f_z";
+							function = "pwm_f";
+							bias-disable;
+						};
+					};
+
+					pwm_f_a_pins: pwm-f-a {
+						mux {
+							groups = "pwm_f_a";
+							function = "pwm_f";
+							bias-disable;
+						};
+					};
+
 					pwm_f_x_pins: pwm-f-x {
 						mux {
 							groups = "pwm_f_x";
@@ -1738,6 +1705,12 @@
 			};
 		};
 
+		pmu: pmu@ff638000 {
+			reg = <0x0 0xff638000 0x0 0x100>,
+			      <0x0 0xff638c00 0x0 0x100>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
+		};
+
 		aobus: bus@ff800000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xff800000 0x0 0x100000>;
@@ -1936,6 +1909,33 @@
 						};
 					};
 
+					uart_ao_b_2_3_pins: uart-ao-b-2-3 {
+						mux {
+							groups = "uart_ao_b_tx_2",
+								 "uart_ao_b_rx_3";
+							function = "uart_ao_b";
+							bias-disable;
+						};
+					};
+
+					uart_ao_b_8_9_pins: uart-ao-b-8-9 {
+						mux {
+							groups = "uart_ao_b_tx_8",
+								 "uart_ao_b_rx_9";
+							function = "uart_ao_b";
+							bias-disable;
+						};
+					};
+
+					uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts {
+						mux {
+							groups = "uart_ao_b_cts",
+								 "uart_ao_b_rts";
+							function = "uart_ao_b";
+							bias-disable;
+						};
+					};
+
 					pwm_a_e_pins: pwm-a-e {
 						mux {
 							groups = "pwm_a_e";
@@ -2415,6 +2415,61 @@
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&cpu_temp>;
+
+			trips {
+				cpu_passive: cpu-passive {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				cpu_hot: cpu-hot {
+					temperature = <95000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+		};
+
+		ddr_thermal: ddr-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&ddr_temp>;
+
+			trips {
+				ddr_passive: ddr-passive {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				ddr_critical: ddr-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map {
+					trip = <&ddr_passive>;
+					cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13